Which iOS for. 4507 switch with sup 7

Hi
When I purchase my 4507 with sup 7, do they come only with ios xe ?
Also if I buy a redundant supervisor, do I also need a software licence for that or is it one licence per chassis ?

When you purchase your 4507 you will have the option of chosing and IOS xe  LAN base, IP Base or Enterprise Services
Cisco IOS XE Software LAN Base: This image provides Layer 2 features for campus access.●
Cisco IOS XE Software IP Base: this image is upgradable with a software activation license (SAL). Itincludes all Layer 2 features and some basic Layer 3 features. ISSU/SSO is supported in this package.
●
Cisco IOS XE Software Enterprise Services: This image is upgradable with a SAL; it supports full Layer 3protocols and advanced features such as complete routing scalability, BGP, VRF, Policy-Based Routing,
and so on.
Thanks,

Similar Messages

  • Which IOS for Catalys 6500 switch?

    Hi,
    I have a Catalyst 6509 switch, which has "cat6000-supk8.8-2-1.bin" CatOS running. I would like to install an IOS in this switch. Can anyone let me know which IOS version is compatible with this switch? Below is the switch information. Thanks!
    Don
    Console> (enable) sho version
    WS-C6509 Software, Version NmpSW: 8.2(1)
    Copyright (c) 1995-2003 by Cisco Systems
    NMP S/W compiled on Dec  2 2003, 18:03:16
    System Bootstrap Version: 5.3(2)
    System Boot Image File is 'bootflash:cat6000-supk8.8-2-1.bin'
    System Configuration register is 0x2
    Hardware Version: 2.0  Model: WS-C6509  Serial #: SCA050300SJ
    PS1  Module: WS-CAC-1300W    Serial #: ACP05030847
    PS2  Module: WS-CAC-1300W    Serial #: SON04221203
    Mod Port Model               Serial #    Versions
    1   2    WS-X6K-SUP1A-2GE    SAL0826ASHR Hw : 7.5
                                             Fw : 5.3(2)
                                             Fw1: 5.4(2)
                                             Sw : 8.2(1)
                                             Sw1: 8.2(1)
             WS-X6K-SUP1A-2GE    SAL0826ASHR Hw : 7.5
                                             Sw :
    2   48   WS-X6348-RJ-45      SAD043105S1 Hw : 1.1
                                             Fw : 5.3(1)
                                             Sw : 8.2(1)
    3   48   WS-X6348-RJ-45      SAD04150GXL Hw : 1.4
                                             Fw : 5.4(2)
                                             Sw : 8.2(1)
    4   48   WS-X6348-RJ-45      SAD04290U51 Hw : 1.1
                                             Fw : 5.3(1)
                                             Sw : 8.2(1)
    5   48   WS-X6348-RJ-45      SAL044831AT Hw : 2.3
                                             Fw : 5.4(2)
                                             Sw : 8.2(1)
    6   48   WS-X6348-RJ-45      SAL04461QAJ Hw : 1.4
                                             Fw : 5.4(2)
                                             Sw : 8.2(1)
    7   48   WS-X6248-RJ-45      SAD04260HBN Hw : 1.2
                                             Fw : 5.1(1)CSX
                                             Sw : 8.2(1)
    8   48   WS-X6348-RJ-45      SAD04290TXY Hw : 1.1
                                             Fw : 5.3(1)
                                             Sw : 8.2(1)
    9   48   WS-X6348-RJ-45      SAL05031G0E Hw : 1.9
                                             Fw : 5.4(2)
                                             Sw : 8.2(1)
    15  1    WS-F6K-MSFC2        SAL0826AQDR Hw : 2.6
                                             Fw : 12.1(13)E14
                                             Sw : 12.1(13)E14

    Glad to help, Don! Just came across the following site that offered a working combo. Might need to doublecheck the code's compatibility with the two types of line cards you have though:
    http://inetpro.org/wiki/Simple_Hybrid_To_Native_6500_Conversion
    IOS for sup1a
    c6sup12-jk2s-mz.121-27b.E1.bin
    Boot image on the MSFC2
    c6msfc2-boot-mz.121-27b.E4.bin

  • IOS for 2960 switch

    How i can download IOS for 2960 switch...?

    No. I have not Service contact?
    A valid Cisco Service Contract is needed to download IOS from Cisco website.  You may need to talk to your authorized Cisco reseller or the vendor who sold you the switch.

  • Cisco 4500 Chessis Switch with sup 7l-e supports VSS for long distance upto 40 Km

    Hello Team,
    hope you will find this massage in good health and spirit.
    As per my understanding, Cisco 4507R+E with Sup-7L-E will supports VSS for long distance upto 40 Km, i have a scenario that there are two Data Centre of a Company at different graphical location (distance is 2 Km), both have separate network devices but distributed servers connectivity and all servers accessed from both location (some servers are placed in location 1 and some servers are at location 2), both location has separate ISPs link with segregation of internet connectivity (some users using internet from ISP-1 and other are using ISP-2), Core Switches of both location connected to each other via fiber (company fiber not ISP), at this moment Core Switches are configured with multi-group HSRP and next upgrade to VSS.
    My concern is if Virtual Switch link (VSL) goes down (which will configure on company fiber link) what is the behavior of Switches, both are in Master mode and working standalone or behavior are different, please confirm and suggest for better.
    Regards,
    Ammar Ud-Din

    does anyone reply me on this......

  • Which ios for catalyst 4500 support wccp?

    hi everybody
    could you pls tell me, which ios I can use for 4500 series that could be support WCCP?
    thanks

    Hi
    As per the datasheet WCCP is not supported in 12.2(25)SG which is the latest available code for 4500.
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp363642
    But you can make use of AGM module which does supports as mentioned in product datasheet relased ..
    http://www.cisco.com/en/US/products/hw/modules/ps2957/ps5288/index.html
    regds

  • Which IOS for BGP dot notation? (7206VXR)

    Hello there! I'm currently using a Cisco 7206VXR (NPE-G1) and need to begin peering with a BGP neighbour that is using a 4-byte ASN. It looks like the firmware I'm using is too old to support this (it's from 2006!) and am wondering what IOS release is best to be using. I'm currently using 12.4(9)T1 for the IOS. The bootloader and rommon look pretty old too. Will I need to upgrade those as well? Should I be jumping right into the 15.x releases or should I stick on 12.4 T releases? Here is an output from a "show version"
    Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2006 by Cisco Systems, Inc.
    Compiled Wed 30-Aug-06 20:48 by prod_rel_team
    ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
    BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(23), RELEASE SOFTWARE (fc5)

    Hi,
    BGP was supported starting from the SP feature set (not in IP Base and IP Voice)
    Beginning from 12.4(4)T, BGP is supported with advance security feature set.
    Begining from 12.4(11)T, BGP is supported with even IP base and IP voice feature set.
    Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s):
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    BR,
    Mohammed Mahmoud.

  • Which image for 3650 switch supports bgp

    Hi Guys. Anyone know the iOS XE image that supports BGP for the Catalyst 3650 L3 switch? Or how to find that information - I keep getting an "image does not support bgp" error.  Thanks.

    Hi,
    If you want to run BGP on 3650 series switches, you need to have IP Services license.
    see table-3 in this link:
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/qa_c67-729531.html
    HTH

  • IPad 4th gen... which iOS does it come with?

    Hi there,
    If I buy a new iPad with Retina display (4th gen I think), does it come with iOS 6 or iOS 7?
    iOS 6 I buy; iOS 7 I don't...
    Thanks,
    Frédéric

    In all likelihood! it will be installed with iOS 6.

  • Cat-4506 with Sup II+ won't load new IOS

    I'm trying to upgrade the IOS on my 4506 SUP II+ (WS-X4013+) to 12.2(31)SG from 12.2(25)EWA5.
    Here are the boot commands and what is in bootflash: and the error during boot:
    boot system flash slot0:cat4500-ipbasek9-mz.122-31.SG.bin
    boot system flash slot0:cat4000-i9k91s-mz.122-25.EWA5.bin
    Configuration register is 0x2102
    ROC-SW4506-A#sh bootflash:
    -#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name
    1 .. image 8B6309F2 CACAA0 33 13027872 Dec 22 2005 04:24:19 -08:00 cat4000-i9k91s-mz.122-25.EWA5.bin
    2 .. image 3D38E47C 1824E28 33 12026632 Jun 2 2006 11:06:21 -07:00 cat4500-ipbasek9-mz.122-31.SG.bin
    ******** The system will autoboot now ********
    config-register = 0x2102
    Autobooting using BOOT variable specified file.....
    Current BOOT file is --- slot0:cat4500-ipbasek9-mz.122-31.SG.bin
    boot: can not load "slot0:cat4500-ipbasek9-mz.122-31.SG.bin"
    The switch will automatically reboot now...
    rommon 1 >
    It eventually booted to the older IOS. Is this not a good IOS for this switch?

    have you tried putting
    boot system bootflash:cat4500-ipbasek0-mz.122-31.SG.bin
    taking out the slot0:.
    This how I have my 4507 and 4503 configured.
    http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a00801461ef.shtml

  • Which ios is shipped with a newly purchased ipad2?

    Im thinking of buying an ipad2, but would like to know which ios it is shipped with.

    ios6

  • Which IOS?

    I have Cat 6509 switch with Sup 720 and MSFC3, I need to upgarde the IOS to support MPLS which version I should use?
    Also what is the version for 3640 that supports MPLS?

    Ahmed,
    For both the 6509 and the 3640 you can use Cisco Feature Navigator II (requires a CCO login) available at http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.
    Josef.

  • More stable IOS for ME 3600-X

    Hi,
    Which IOS for ME 3600X switch better suits production deployment (more features, less known/unknown(by TAC) bugs, etc.) ? What are key differences?
    The choice is between:
    15.3-1.S
    15.2-4.S2
    wbr,
    Alex
    DAO21-RIPE       

    I've just finished upgrading to 15.3(2)S.  So far so good.  I'm happy with this.
    WARNING:  I don't remember which one, I'm suspecting it was 15.2(4)S, but if anyone is upgrading FROM THIS version to anything else, DO NOT use the command "archive download-sw" command.  Here's what going to happen when you do:
    1.  Firstly, your CPU will spike so high, you'd think you just killed your appliance;
    2.  The entire download "process" will take 1/3 of the actual time and you'd mistakenly think the IOS upgrade has been completed.  Well, NO IT HAS NOT.
    If you look for the Cisco Bug Toolkit, it'll say that the workaround is "NONE".  And I've sent a negative feedback about the accuracy of this workaround.
    The REAL workaround is to use the "archive tar /x tftp:///IOS.TAR flash:" command.  After the IOS extraction (/x) is done, you may delete the old IOS, change the bootstring and then reload the switch.

  • I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version.  If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app.  You will need to get a more up to date phone

  • HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

    hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

    Google "iOS versions" and read the first match (Wikipedia)........

  • Best IOS version for 3750 switch

    I have just received 2 3750 switches, but both have a different IOS version.
    One has -> IOS version 12.1(19)EA1d
    and the other has -> IOS version 12.2(25)SEB2.
    I just want to use the switches as Gb collectors for a serverfarm seperatly (so no stack configuration) with a redundant uplink to my distribution layer.
    Can someone advise my which IOS is the best for my network?
    Thanx, Marty

    Switch 1:
    Cisco Internetwork Operating System Software
    IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Mon 05-Apr-04 22:06 by antonino
    Image text-base: 0x00003000, data-base: 0x009206D8
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000137 uptime is 23 hours, 52 minutes
    System returned to ROM by power-on
    System restarted at 09:02:42 GMT Thu Aug 11 2005
    System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision H0) with 118776K/12288K bytes of memory.
    Processor board ID CAT0904X00B
    Last reset from power-on
    Bridging software.
    1 Virtual Ethernet/IEEE 802.3 interface(s)
    28 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:13:1A:65:50:00
    Motherboard assembly number : 73-7058-12
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT090400A0
    Power supply serial number : LIT09020266
    Model revision number : H0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0904X00B
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.1(19)EA1d C3750-I5-M
    Configuration register is 0xF
    Switch 2:
    Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Wed 08-Jun-05 01:19 by yenanh
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000138 uptime is 59 minutes
    System returned to ROM by power-on
    System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.
    Processor board ID CAT0925Z0WZ
    Last reset from power-on
    1 Virtual Ethernet interface
    28 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:14:A8:71:CA:00
    Motherboard assembly number : 73-7058-13
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT09251J90
    Power supply serial number : PHI09220165
    Model revision number : L0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0925Z0WZ
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
    Configuration register is 0xF

Maybe you are looking for

  • Apple TV 3 restore

    I was fighting a lot to connect apple tv to the computer and I found the way -Update the computer -Connect Apple TV 3 (power cord to and outlet and micro-USB cable to the computer) Yeah. Nothing happens right now. -Restart the computer and not discon

  • Updating Serial # Location via DTW???

    Hi,  we recently had to relocate some inventory from one location to another.  During initial upload we populated the serial # location during goods receipt.  I now need to change that location for about 100 serial numbers.  Is there a way to do this

  • Document scanning in APEX

    Hi all, Apex 4.2.4 Oracle 11XE I'm working on an CRM/accounting application. One of my wishes is to use OCR or document scanning in the app. The idea is that a user is able to take a picture of a quote (using her mobile phone). The picture should be

  • How to use htree on form 6i

    Hi guys! I have no idea how to use the tree in the form 6i.I have a table which defines the testcode and testname of the lab test and made the forms which show the test results. I gave the name to these forms as describes in the table i.e.(testname).

  • Multiple login pages

    I need to display a different login page when I use logins in. It doesn't necessarily needs to be a new page let me correct that. I just want to be able to change the logo that is displayed based on the user that is logged in. Is there any way to pas