Which IOS for BGP dot notation? (7206VXR)
Hello there! I'm currently using a Cisco 7206VXR (NPE-G1) and need to begin peering with a BGP neighbour that is using a 4-byte ASN. It looks like the firmware I'm using is too old to support this (it's from 2006!) and am wondering what IOS release is best to be using. I'm currently using 12.4(9)T1 for the IOS. The bootloader and rommon look pretty old too. Will I need to upgrade those as well? Should I be jumping right into the 15.x releases or should I stick on 12.4 T releases? Here is an output from a "show version"
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 30-Aug-06 20:48 by prod_rel_team
ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(23), RELEASE SOFTWARE (fc5)
Hi,
BGP was supported starting from the SP feature set (not in IP Base and IP Voice)
Beginning from 12.4(4)T, BGP is supported with advance security feature set.
Begining from 12.4(11)T, BGP is supported with even IP base and IP voice feature set.
Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s):
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
BR,
Mohammed Mahmoud.
Similar Messages
-
Which ios for catalyst 4500 support wccp?
hi everybody
could you pls tell me, which ios I can use for 4500 series that could be support WCCP?
thanksHi
As per the datasheet WCCP is not supported in 12.2(25)SG which is the latest available code for 4500.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp363642
But you can make use of AGM module which does supports as mentioned in product datasheet relased ..
http://www.cisco.com/en/US/products/hw/modules/ps2957/ps5288/index.html
regds -
Which IOS for Catalys 6500 switch?
Hi,
I have a Catalyst 6509 switch, which has "cat6000-supk8.8-2-1.bin" CatOS running. I would like to install an IOS in this switch. Can anyone let me know which IOS version is compatible with this switch? Below is the switch information. Thanks!
Don
Console> (enable) sho version
WS-C6509 Software, Version NmpSW: 8.2(1)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Dec 2 2003, 18:03:16
System Bootstrap Version: 5.3(2)
System Boot Image File is 'bootflash:cat6000-supk8.8-2-1.bin'
System Configuration register is 0x2
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA050300SJ
PS1 Module: WS-CAC-1300W Serial #: ACP05030847
PS2 Module: WS-CAC-1300W Serial #: SON04221203
Mod Port Model Serial # Versions
1 2 WS-X6K-SUP1A-2GE SAL0826ASHR Hw : 7.5
Fw : 5.3(2)
Fw1: 5.4(2)
Sw : 8.2(1)
Sw1: 8.2(1)
WS-X6K-SUP1A-2GE SAL0826ASHR Hw : 7.5
Sw :
2 48 WS-X6348-RJ-45 SAD043105S1 Hw : 1.1
Fw : 5.3(1)
Sw : 8.2(1)
3 48 WS-X6348-RJ-45 SAD04150GXL Hw : 1.4
Fw : 5.4(2)
Sw : 8.2(1)
4 48 WS-X6348-RJ-45 SAD04290U51 Hw : 1.1
Fw : 5.3(1)
Sw : 8.2(1)
5 48 WS-X6348-RJ-45 SAL044831AT Hw : 2.3
Fw : 5.4(2)
Sw : 8.2(1)
6 48 WS-X6348-RJ-45 SAL04461QAJ Hw : 1.4
Fw : 5.4(2)
Sw : 8.2(1)
7 48 WS-X6248-RJ-45 SAD04260HBN Hw : 1.2
Fw : 5.1(1)CSX
Sw : 8.2(1)
8 48 WS-X6348-RJ-45 SAD04290TXY Hw : 1.1
Fw : 5.3(1)
Sw : 8.2(1)
9 48 WS-X6348-RJ-45 SAL05031G0E Hw : 1.9
Fw : 5.4(2)
Sw : 8.2(1)
15 1 WS-F6K-MSFC2 SAL0826AQDR Hw : 2.6
Fw : 12.1(13)E14
Sw : 12.1(13)E14Glad to help, Don! Just came across the following site that offered a working combo. Might need to doublecheck the code's compatibility with the two types of line cards you have though:
http://inetpro.org/wiki/Simple_Hybrid_To_Native_6500_Conversion
IOS for sup1a
c6sup12-jk2s-mz.121-27b.E1.bin
Boot image on the MSFC2
c6msfc2-boot-mz.121-27b.E4.bin -
Which iOS for. 4507 switch with sup 7
Hi
When I purchase my 4507 with sup 7, do they come only with ios xe ?
Also if I buy a redundant supervisor, do I also need a software licence for that or is it one licence per chassis ?When you purchase your 4507 you will have the option of chosing and IOS xe LAN base, IP Base or Enterprise Services
Cisco IOS XE Software LAN Base: This image provides Layer 2 features for campus access.●
Cisco IOS XE Software IP Base: this image is upgradable with a software activation license (SAL). Itincludes all Layer 2 features and some basic Layer 3 features. ISSU/SSO is supported in this package.
●
Cisco IOS XE Software Enterprise Services: This image is upgradable with a SAL; it supports full Layer 3protocols and advanced features such as complete routing scalability, BGP, VRF, Policy-Based Routing,
and so on.
Thanks, -
Hi,
Which IOS for ME 3600X switch better suits production deployment (more features, less known/unknown(by TAC) bugs, etc.) ? What are key differences?
The choice is between:
15.3-1.S
15.2-4.S2
wbr,
Alex
DAO21-RIPEI've just finished upgrading to 15.3(2)S. So far so good. I'm happy with this.
WARNING: I don't remember which one, I'm suspecting it was 15.2(4)S, but if anyone is upgrading FROM THIS version to anything else, DO NOT use the command "archive download-sw" command. Here's what going to happen when you do:
1. Firstly, your CPU will spike so high, you'd think you just killed your appliance;
2. The entire download "process" will take 1/3 of the actual time and you'd mistakenly think the IOS upgrade has been completed. Well, NO IT HAS NOT.
If you look for the Cisco Bug Toolkit, it'll say that the workaround is "NONE". And I've sent a negative feedback about the accuracy of this workaround.
The REAL workaround is to use the "archive tar /x tftp:///IOS.TAR flash:" command. After the IOS extraction (/x) is done, you may delete the old IOS, change the bootstring and then reload the switch. -
hi!
I make a e-book and it will be published on appstore and android market as application.
I'm wondering about font.
Can i use a font such as Yuppy, Chalkboard which is basically included in iOS for commercial purpose like me?
I bought a mountain lion on appstore.
I look forward to hearing from apple whether it is lawful or not.
Have a blessed day~:)Strangely, there isn't and end user license on Apple's site regarding iOS. But here's a look at the font agreement section from OS X Mountain Lion:
E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included with the Apple Software to display and print content while running the Apple Software; however, you may only embed fonts in content if that is permitted by the embedding restrictions accompanying the font in question. These embedding restrictions can be found in the Font Book/Preview/Show Font Info panel.
So basically, you need to examine the fonts to see if there are notes on usage restrictions or limitations. -
I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?
This may sound crazy, but download any free app. This often "shocks" the other apps into working.
-
Which is the best iOS for iPhone 3G? I am currently on 3.1.3 !
Which is the best iOS for iPhone 3G?
Should i update it to the latest 4.2.1 or let it be on my current firmware 3.1.3?
I have heard that 3G is best on 3.1.3?
Comment?If I may, I agree that version 3.1.3 is the best for the iPhone 3G, however, I am currently travelling in Europe and I have a SIM card from a local mobile company. I discovered the hard way that there is an option missing: Settings > General > Network > Cellular Data (on/off). This option is not present in iOS 3.1.3. So basically, you disable 3G but it is impossible to block EDGE, and your phone will automatically revert to it if 3G is not available, and you will occur cellular data fees anyway.
I am sure of what I am saying because with the local service I use, I have unlimited data for $4 per day, but it is debited as soon as I consume one byte of data, then it is free until midnight the same day. Event if I have set Enable 3G = off, Data Roaming = off, for two days in a row, I was still charged the $4 a day because the Cellular Data was not off!
I compared with my wife's iPhone 3GS with iOS 5.1, there is the three options, Enable 3G (on/off), Data Roaming (on/off), Cellular Data (on/off). The option to turn it off simply doesn't exists on iOS 3.1.3!
With some research, I found that it is possible to block it anyway if you change your APN (Access Point Name) to an invalid setting. The easiest way to do this is to connect to the Internet using WiFi, then access this web site with Safari: http://unlockit.co.nz/ (from your iPhone).
This online tool allows you to change your APN, it is very useful when you travel abroad and you use local SIMs. On the first screen press Continue, on the second screen press Custom APN to create an APN for a local mobile company, or press Disable Data (FakeAPN) to disable 3G and Edge for good. When creating a Custom APN, you will be asked to choose a Country and a Provider, then press Create Profile. Then, either way, press Install and "Install Now" or "Replace", then press Done. This will add two things to your phone: first, an app-like icon for quick access to the website http://unlockit.co.nz/, second, a new menu in Settings > General, labelled "Profile", that contains your new APN. Note that it is possible to add several profile information, and some may conflict with each other. Remove those you don't need. Don't remove them if you are not sure!
I hope this works for you! -
I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps
with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version. If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app. You will need to get a more up to date phone
-
hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device
Google "iOS versions" and read the first match (Wikipedia)........
-
IOs for cisco 1900 series router
Hi,
Kindly provide me the IOS version (cisco 1900 router) which can fix the below listed Bugs,
Cisco IOS TCP Listener Crafted Packets Remote DoS (CSCek37177)
Cisco Multiple Devices Crafted IP Option Remote Code Execution (CSCeh52410)
Cisco IOS System Timers Remote Overflow (CSCei61732)
Cisco IOS Secure Shell Server TACACS+ Multiple DoS (CSCed65778, CSCed65285)
Cisco IOS IKE XAUTH ISAKMP IPSec SA Establish Authentication Bypass(CSCeg00277)
Cisco IOS Telnet Service DoS (CSCef46191)
Cisco IOS H.323 Protocol Implementation Flaws Cisco IOS Malformed IPv4 Packet Remote DoS Cisco SSH2 Server/Client Malformed Packet Remote DoS (CSCdz60229, CSCdy87221, CSCdu75477)
Cisco IOS SSH Large Packet CPU Consumption DoS (CSCdw33027) Cisco SIP Crafted INVITE Message Handling DoS (CSCdz39284, CSCdz41124) Cisco IOS Data-link Switching (DLSw) Capabilities Exchange Remote DoS (CSCsf28840)
Cisco IOS AAA RADIUS Long Username Authentication Bypass (CSCee45312)
Cisco IOS TCLSH AAA Command Authorization Bypass (CSCeh73049)
Cisco IOS MMP Stack Group Bidding Protocol (SGBP) Crafted UDP Packet Remote DoS (CSCsb11124)
Cisco IOS IPv6 Packet Processing Arbitrary Code Execution (CSCef68324)
Cisco IOS Malformed BGP Packet Processing Remote DoS (CSCee67450)
Cisco IOS Multi Protocol Label Switching (MPLS) Packet Remote DoS (CSCeb56909)
Cisco IOS IPv6 Packet Processing Remote DoS (CSCed40933)
Cisco IOS SCCP Control Protocol Malformed Message DoS (CSCee08584)
Cisco IOS OSPF Packet Handling DoS (CSCec16481) Cisco IOS ARP Table Overwrite DoS (CSCdu81936)
Regards,
BalaHi,
The Current running IOS version is 12.2(4)T7. I tried through bug toolkit. but i couldn't able to consolidate the IOS to fix these bugs.
Regards,
A.Bala
leolaohoo wrote at Tue Jan 25 02:20:52 GMT+05:30 2011:
>Balakrishnan Appavu,
>
>A new message was posted in the Discussion thread "IOs for cisco 1900 series router":
>
>https://supportforums.cisco.com/message/3277195#3277195
>
>Author : leolaohoo
>Profile : https://supportforums.cisco.com/people/leolaohoo
>
>Message: -
On set up I am frozen on screen which ioS 6 cant get itunes to sync
On set up I am frozen on screen which ioS 6 cant get itunes to sync and I can turn the IPAD mini on but has no apps and is un responsive. When checking with computer its downloaded my pictures from Old ipad but I can see no apps or differing screens.
It is basically just a zombie machine with a screen with IOS6 on it. I have left it on with WIFI over night and still nothing.
I only bought this yesterday
HelpIn windows goto control panel>add and remove and uninstall itunes AND quicktime.
Now go here and follow ALL steps for cleaning itunes and quicktime out (Don't download or install yet) http://docs.info.apple.com/article.html?artnum=93976
Scan for malware with ewido http://www.ewido.com
DISABLE ANTIVIRUS and security programs, then go here and instal "Quicktime WITHOUT itunes" http://www.apple.com/quicktime/download/standalone.html
Reboot, disable antivirus again then goto apple.com and download/install itunes -
How can I create a folder in ios for pdf files?
How can I create a separate folder in ios for my pdf files?
Hi Artistdeet,
For this you have to follow certain steps-
1. Tap on Document tab from left pane of Adobe Reader.
2. Tap on 'Edit' button placed at right side of top toolbar.
3. Tap on "folder icon with plus sign", it will ask you to enter the folder name.Enter desired folder name by which you want to create the folder.
Hope this will solve your problem.
Thanks
-Satyadev -
Which iOS SDK does AIR 3.5 use?
How can we find out which iOS SDK is being used by Adobe AIR?
We're using Adobe AIR SDK 3.5 with Flash Builder.
Is it possible to change the iOS SDK?
The -platformsdk compiler argument shows as unsupported inside Flash Builder.
Thank you.Thanks for the quick reply.
Can you please take a look at our other thread here -
http://forums.adobe.com/message/4834786#4834786
We're facing some difficulties with iPhone/iTouch (4th Generation) devices running iOS 6. -
Need info about the IOS for 4503
Hi There,
we are running a cisco 4503 with bootflash:cat4000-i5s-mz.122-20.EW4.bin IOS on that, we are informed to upgrade the IOS on that. However, no info on which IOS has to be deployed on that. Hence, can some one please suggest the latest and upgraded IOS for the Cisco 4503 switch.
The memory details are below
Switch# Show verion
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12.2(20)EW4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 13-Oct-06 11:35 by tinhuang
Image text-base: 0x00000000, data-base: 0x011F879C
ROM: 12.2(31r)SG2
Dagobah Revision 226, Swamp Revision 34
PT_HE_Main_110.254 uptime is 4 weeks, 1 day, 18 hours, 33 minutes
System returned to ROM by reload
System restarted at 17:10:55 IST Mon Feb 24 2014
System image file is "bootflash:cat4000-i5s-mz.122-20.EW4.bin"
cisco WS-C4503 (MPC8245) processor (revision 4) with 524288K bytes of memory.
Processor board ID FOX103809BG
MPC8245 CPU at 400Mhz, Supervisor V
Last reset from Reload
156 Virtual Ethernet/IEEE 802.3 interface(s)
98 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Switch # dir
Directory of bootflash:/
1 -rwx 11343796 Dec 5 2006 11:28:14 +05:30 cat4000-i5s-mz.122-20.EW4.bin
59244544 bytes total (47900620 bytes free)
Switch #
Thank you
PeterLatest and greates IOS selection menu can be found here.
Make sure you take the time to read the Release Notes.
Maybe you are looking for
-
Bookmark bar does not work on one of my computers - w XP
Firefox 4.0 - the bookmark bar does not work. It appears but will not accept drags. PC w Windows XP - 3. Another thing too - The open new tab does not show up at all, in order to open a new tab I had to put the "open new tab" tab into the navigation
-
When adding Custom Text to a slideshow in Aperture, I can no longer centre the text in the text box. Is there something I am missing? I am running Aperture 3.6 on Yosemite. Any ideas gratefully received, thanks.
-
Want to Receive Response Back From SOAP
Hi , My Scenario is IDOC-XI--SOAP Iam sending the IDOC from R/3 and want to hold the Response message from SOAP like "Success or Fail". I want to the response message in XI itself, no need to reach the response even to R/3. How can we achive this Reg
-
First, if this has been covered in another post my apologies but as always I am in a time crunch and do not have the time to search. My problem has to do with images that line up in layout view of DWcs5 but when I engage "live view" they shift. The f
-
I am an elderly person and cannot understand the upgraded Fire Fox. Is it possible to delete the upgrade and give me the old version which is easy to understand? My email is [email protected]