Which IOS is safe and secure to user??

Hello,
I am installing a 4402 WLC next week and I am trying to determine which IOS version I should install. I see that there are many options to choose from. My pass experiences from talking with Cisco Reps that 5.0 is not good and 4.2 is the safest; but I see now that there has been a 5.1, 5.2, and 6.0 release since the last time I have had to upgrade or install a WLC.
I have read the release notes on 4.2.205, 5.2.193, and 6.0.182.0 and nothing seems to jump out at mean in the Caveats that makes me say one is better than the other. So, if anyone can tell me what's best or have any arguments against a particular version I'd appreciate it.
This is a new install with 30 APs.
Thanks!!

4.2.205.0 is the latest main deployment version of code with the AssureWave accreditation i.e the most tested and stable currently available. I have implemented this code with no issues so far. I would advise only upgrading to 5/6 code if there are any specific features in that release you require for your deployment. Most 5 codes have various bugs and 6 is geared more towards the 5500 WLC at present.
Hope this helps.
Mat

Similar Messages

HT4013 Is it safe and secure to use iOS 3.1.3 ?

Is it safe and secure to use iOS 3.1.3 ?
And are you able to use the latest version of the facebook app on this iOS?

Is it safe and secure to use iOS 3.1.3 ?
I have heard of no exploits that can affect non-jailbroken iPhones regardless of the version of iOS. While iOS 3.x is no longer being updated, there should be no reason to worry. A second-generation iPod touch can run up to iOS 4.2.1, though.
And are you able to use the latest version of the facebook app on this iOS?
No. As the Requirements for the Facebook app in the iTunes Store state, it requires iOS 4.0 or later.
Regards.

HT201317 Is it safe and secure?

Is the photos and the videos on my iPhone or any other apple device are safe and secure and once I delete them manually dose it gets deleted permanently ?

Not if you're relying on your iCloud backup to keep them. While the backup includes photos and videos in your camera roll, if you delete them from your phone, then continue to back it up, the backup that contains the deleted photos and videos will soon be overwritten by one that doesn't, and they will be lost.
To keep them permanently backed up, import them to your computer as explained here: http://support.apple.com/kb/HT4083.

I have used a Seagate external hard drive for my Mac desktop. It is malfunctioning. Can I disconnect and depend on iCloud to keep my documents, music, and photos backed up safe and secure? I use the Cloud for phone, pad and desktop.

Can I expect iCloud to safely back up and secure my documents, music and pictures? I am using Cloud on phone, pad, and desktop. Have depended on external hard drive in the past. It is malfunctioning. Will the Cloud replace it for storage and safety?

Time Machine in itself, without an external drive may well be good for instances where you accidentally delete documents that you later require. However in the event of a hard drive failure, if Time Machine backup is kept on the same drive as the original items, it will not be much use to you.
In my opinion, it is vitally important that you have an external drive for backup, whether you use Time Machine or a another backup solution is entirely up to you.
My situation is slightly unusual, I have four hard drives in my computer and multiple arrays of hard drive enclosures with multiple hard drives within them (in total I have 40 TB of storage). As a result of this I tend to employ more than one backup procedure, I use Time Machine to backup some items and a utility called tri-backup to backup other items. I also keep two backups of everything.
Time Machine is free, it's included with your operating system, I wonder if you mean time capsule.

Staying Safe and Secure With Verizon's Premium Tech Support, Online Security, Cloud Storage Solution

NEW YORK – No one wants to worry about online threats or how and where to store their many files. A new solution from Verizon will ease these concerns.
The Security, Support & Storage Bundle provides Verizon small-business and residential customers with comprehensive protection from viruses and malware on many connected devices; premium tech support to help keep customers’ technology running smoothly; and cloud storage for files, videos, photos and more.

All I have to say about that is, "People fear what they do not know." Everyone has a comfort zone. Some people's comfort zone is larger than others, or encompasses different aspects of life. Most Windows users aren't comfortable with Mac or Unix operating systems. Most English speakers aren't comfortable with foreign languages. Most two-year-olds aren't comfortable with spinach.
C'est la vie.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

When using Firefox 3.6 my Norton Security Suite taged each site with a green circle if it deemed the site safe and secure - Firefox 4.0 does not show this protection o

When I was running Firefox 3.6 my Norton security Suite marked each site with a green circle to indicate to me that they felt that the site was safe to go to. They also indicated the sites that they protected with a yellow rectangle.
When I switched to Firefox 4.0 those markers no longer appear.
Really would like to have that sense of security back.
What do I need to do to get Norton back on the job with Firefox

Symantec have released updates for Norton 360 and Norton Internet Security to make them compatible with Firefox 4, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894

How long is FF3.6 going to be safe and secure?

I tried FF4 but hated it and will not use it. TOO Many problems. I WILL switch to anything else if you end support for FF3.6. Fro what I read I am not alone.

Support for Firefox 3.6 '''''will''''' eventually end, but I haven't seen a proposed date for that to happen. Considering that Firefox 3.5.19 is scheduled to be released on Tuesday 4/19, along with 3.6.17, a full 15 months after 3.6 was originally released - I would be surprised if Mozilla didn't do security "fix" releases for 3.6 well into 2012.

Security Profiles - Difference between SYSTEM and TENANT admin user?

Hi,
In the OnDemand Enterprise workbook, some defualt security profiles have been configured. This includes one called 'Tenant Admin'. When I look in the system there is also a profiule called 'System Admin'. Could somebody please explan the differences between system and tenant regarding these profiles? I assume we shoul drarely use System Admin, and Tenant Admin is the safer option?
Thanks
John

Hi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran.

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Grant access to help desk users to add members to distribution and security groups

Hello,
I am trying to create a set of help desk users that has full access to add or remove members from distribution and security groups as well as update users. We want it to bypass owner approval and essentially allow this group to add or remove members
in the FIM Portal and flow it down to ADS.
This obviously works fine if one is a member of the Administrators set, but we want a second tier of power users with limitied rights compared to FIM Admins. We have added the help desk team to the Security Group Users and Group Users set as
well as MPR "Security group management: Users can read selected attributes of group resources".
The help desk users can update users in the Portal with no issue. The can search groups with no issue but when they try to add members to a group they get the error "Access Denied".
Any help is greatly appreciated.
Thanks!

I'm having very similar problem - I have users with delegated right to modify group membership only. User can add someone to group and it works fine, but when the same user is trying to remove and user from a group (even if this is the same user
which was added a minute ago) he gets Access Denied:
The
request included members which the requestor is not authorized
to add and/or remove from this group."
It is caused by default MPR:
Group management workflow: Validate requestor on remove member
Question is how this activity validates this request - any insight?

People Picker can resolve users and security group from another domain but no validation for groups

Dear all,
Here is the scenario of our issue:
We are migrating from Domain A to Domain B and in Domain A we currently have a SharePoint 2013 on which we want to set permissions for users and groups that have already migrated to Domain B.
A bi-directional trust exist between the two domains and all applications relying on trust and resolving IDs from on domain to another are working fine (Windows RDS for instance)
The "bug" that we have is when using the PeoplePicker, it can resolve without any issue a user account in Domain A or B, and a security group (type global, I haven't tried local or universal yet) from domain A or B. But for the security groups
only (it works well for users), when I click on "Save" to validate the add of the group to the site permissions, I have the following error:
I have seen a lot of similar issues on the web but no answer so far that work :(
Example: https://social.technet.microsoft.com/forums/sharepoint/en-US/74e8d14b-a0f4-4e21-8cfa-b1a937247160/cant-provision-security-to-old-domain-users
If you have any question that could help you to understand it, do not hesitate.
Thanks a lot in advance for your help ! :)

Can you give the snippet from the ULS log where you're seeing this error?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Javax.security.auth.Subject and weblogic.security.acl.User

Hello,
We are trying to move some old authentication code (Weblogic 5.1) to JAAS
which comes with Weblogic 6.1. Here is my problem:
I can succesfully authenticate the Subject through my RDBMS Realm. But then, the rest of my code uses weblogic.security.acl.User
and not javax.security.auth.Subject for authorization and other tasks. So, how can I extract weblogic.security.acl.User from javax.security.auth.Subject?
I tried subject.getPrincipals(), since User indirectly implements Principal, but it comes back empty.
Any suggestions?

Hello,
We are trying to move some old authentication code (Weblogic 5.1) to JAAS
which comes with Weblogic 6.1. Here is my problem:
I can succesfully authenticate the Subject through my RDBMS Realm. But then, the rest of my code uses weblogic.security.acl.User
and not javax.security.auth.Subject for authorization and other tasks. So, how can I extract weblogic.security.acl.User from javax.security.auth.Subject?
I tried subject.getPrincipals(), since User indirectly implements Principal, but it comes back empty.
Any suggestions?

Is it a way to find out which secure zone user belong to?

So we have three secure zones on website.
Basic User
Intermediate User
Premium User
Based on where user belong to we would like to show accurate user menu upon him/her logging in the website.
Currently we have a module to find out if ANY USER has logged in or not - {module_isloggedin}. Is there similar type of module or functionality to find out which secure zone this user belong to - something like {module_securezonebelongto}, which returns an ID for secure zone using which and with some help of JS we could manipulate user menu options.
I am sure many of us are looking for similar option and some might have found a solution for this.
Can you please share your thought(s) and idea(s) for this one? I really appreciate your input.
Thanks

The only thing you have is {module_subscriptions}\
Format:
{module_subscriptions,show_expiry,show_prices,reserved,render_json}
Where:
show_expiry - shows or hides the expiry date of the secure zone (true/false; default:true)
show_prices - shows or hides the cost of the subscription to that secure zone (true/false; default:true)
render_json - Will render the secure zone information in Json format which can be manually parsed (true/false)

Seek easy and safe way for average users to manage the contents of Portal.

Dear all,
My boss today requested me to provide a easy, safe way for average users in my company to manage the contents of Portal themselves.
My boss request users can upload files, documents, images and text into Portal.
I know that Oracle Portal provides security control for editing Portal. But it also provides a quite complex operations for manage the contents of Portal.
I am afraid average users cannot manage it easily.
Can anyone have experience on the issues and can you give me suggestion?
Thanks a lot
George (HK)

Hi Vijay.B,
We can give privileges to manage the contents of the portal page.
Create a group and add the users into that group and for the page level privilege >>add this group as manage.
The members of the group can manage the page.I know the above is the standard strategy for users to manage the portal contents.
But, as an average user, I think it is still to complicated to manage.
For my case, I need to provide a means for average users to add news to the portal, so my priliminary idea is that I will create a portlet for news entries such as news heading, hyperlinks, text and save the entries in DB. Then, on the homepage of Portal, I will create another portlet for displaying the news headlines with hyperlink pointing to the actual URL.
thanks
George
Regards,
Vijay.B

Difference between Security Oracle user and Security User

Hi All,
Can anyone give me the difference between Security-> Oracle -> user and Security-> User in System Administrator Resp of oracle apps R12.
Thanks,
Mahesh.
Edited by: 991854 on Mar 12, 2013 1:49 AM

Can anyone give me the difference between Security-> Oracle -> user and Security-> User in System Administrator Resp of oracle apps R12.Security > Oracle > Register:
Use this window to register an ORACLE username with Oracle E-Business Suite. An ORACLE username grants access privileges to the ORACLE database
http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174305.htm
Security > Oracle > Data Group:
A data group defines the mapping between Oracle E-Business Suite products and ORACLE database IDs. A data group determines which Oracle database accounts a responsibility's forms, concurrent programs, and reports connect to. See: Defining Data Groups, Oracle E-Business Suite System Administrator's Guide - Configuration.
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T156461.htm
Security > User > Define:
Use this window to define an Oracle E-Business Suite user. This user is an authorized user of Oracle E-Business Suite, and is uniquely identified by a username.
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T156461.htm
Thanks,
Hussein

Which IOS is safe and secure to user??

Similar Messages

Maybe you are looking for