Which IOS version for 3925 fixes CSCul63961?

Hello everybody,
A little while ago we ran into CSCul63961 on one of ours 3925 routers.
I know, this bug-id speaks of Cisco 1900 integrated routers series, but according to Cisco TAC engineer we've been in touch regarding some other issue we had with the same box – claimed that 3900s are affected either.
Now, CSCul63961 seems to have been resolved lately – but all the 'Known Fixed Releases' don’t match software releases for 3900. Release notes for 15.4.3M (the latest s/w available for download for 3925) doesn’t mention CSCul63961.
This raises the question – what software version for 3925 fixes CSCul63961?
Any help will be appreciated.
Thank you.

Mheimby,
Sorry its not fixed in any of the 15.2 release. Its only fixed in the 15.4 (02)T onwards.
HTH
Regards
Inayath
**Plz dont forget to rate this post if usefull.

Similar Messages

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version. If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app. You will need to get a more up to date phone

3560 IOS version for IPT + duplex settings?

Hi! Need a recommendation of which IOS version to use for a 3560 w inline power to be used with ip telephony. Also does the ip phones work well with duplex set to auto?

You check after the IOS ver 12.1(11). This will support IPT

Which iOS version is running on the iPhone 4s 8 GB 2014 version?

Hey !
I just wanna know which iOS version is preinstalled on the iPhone 4s 8GB they selling since this year.
Much thanks !

You are never forced to update. You would just need to live with whatever version was on it. However, I'd recommend against the 4S. 8gigs is not enough memory for most people. It's rarely a good idea to buy tech that's already been discontinued by the manufacturer.

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

Is it same IOS version for Switch & Router?

Hi,
Is it same IOS version for Switch & Router?
Regards,
Samuel

Sam,
The Latest Version depends upon the Switching platform.
For example:
On 2900XL Platform - 12.0(5)WC15
On 2950 - 12.1(22)EA8
On 3500XL Platform - 12.0(5)WC15
On 3550 - 12.2(25)SEE2
It would be better if you specify the switch platform that you have questions about, so we could point you in the right direction.
I hope it helps.
Regards,
Arul

CS5.5 Air for iOs - Which iOs versions are supported?

Hi everyone,
I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
Suggestions?
Anyone tried on similar OS?
Thanks a lot
Iacopo

Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
Any news on this?
Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

How to select a stable IOS version for switch ?

There isn't any GD version for switch. So how did I know which version is stable ?
thanks!

Hi there,
Usually the most efficient way of selecting a stable version of IOS/CatOS is to take a look through the release notes at the caveats section and verify if there are any issues that would affect your network directly. In addition, working with your local SE is a good idea, as they can offer you their design advice. Usually, a wise move is going with the latest release within a given branch is the most stable, as it includes the most bug fixes. I hope this helps.

How to Determine which IOS version is new

Hi
When I have a few IOS versions such as 12.3(2) , 12.3.(3)B and 12.3(2)T how do I know out of these three which one is the newest and which one is the oldest?
Also is there a 12.4 for the 2500 series routers?
Your help is much appreciated!
Many thanks!

Hi Omal,
To some degree you are comparing apples and oranges here. As mentioned by another poster, IOS is released in several different "trains," and it can be hard to compare between them. So, 12.3(2)T is a (T)echnology train, meaning it has new features and bug fixes integrated with each release. 12.3(2) by itself is a mainline train, which generally just has bug fixes committed. Cisco works on both trains at the same time, integrating bug fixes into mainline code, and new features and bug fixes into the T-train. In addition to "T", other letters are often placed at the end of the IOS release for specialized IOS's for certain product lines, such as the Cat 6K or 10000 series.
So, the short answer would be this: I recommend comparing IOS's within their train and not between trains. There can be substantial differences.
Are you looking at a bug and trying to determine where it is fixed, or is this just a general question?
Jeff McLaughlin, CCIE #14023
Cisco Systems

App store updates broken regarless of device or iOS version for days now?

Your Apple App store updates are just plain broken.(period)! It doesn't matter the device or the iOS release.
I have various devices, ipod Touch(s) several versions, iPhones, Ipads several versions and it makes no different which iOS or device; some are at 3.1, some are at 5.1 and some are at iOS6. All show app updates, NONE seem to get conected or work by staying connected.
I have done hard resets on all devices(more than once), and if you delete and APP you can NOT stay connected to re-download the APP; update times out right after it starts to update and then quits... It doesn't matter if it is a single update or Update ALL and it doesn't matter which APP.
you might can get one to update if you like try 20 times..... this has been going on for at least 4 days now. Apple PLEASE get this FIXED or provide a work around via support announcement / notes..... You can't download then either as it times out so this is costing you Apple money.
Thank you...

Unfortunately, these are strictly user to user forums - no Apple employees here. You can use this to send them feedback (there are several other feedback links on that page depending on which one you want to use):
http://www.apple.com/contact/feedback.html

AS5350XM - Compatible IOS version for 'ip host ... srv' command.

Hi Friends,
I'm having AS5350XM model of Voice Gateways in CVP8.0 environment working with ICM8.0 and CUCM8.0.
I'd like to define static hostname-to-address mappings in VG for my CVP CallServers along with command argument 'SRV' to use all 4 CVP servers for loadbalancing and failover functionality thereby assigning priority to each call server.
I tried by using a couple of IOS version starting from 12.4(24)T4 till 15.1(3)T, but can't find a particular version which supports the argument 'srv'.
I'd appreciate if someone could suggest me an appropriate IOS version supporting 'srv' argument with 'ip host' command on AS5350XM Gateways.
Pls feel free to revert for any clarifications. Thank you.
Regards,
Soman Nair.

You should be able to do it.
In your dial peer you should be able to say
session target dns:callserver.sgp.foobar.com
and in your IP host table
ip host CA1.sgp.foobar.com 10.10.1.2
ip host CA2.sgp.foobar.com 10.10.1.3
ip host CA3.sgp.foobar.com 10.10.1.4
ip host CA4.sgp.foobar.com 10.10.1.5
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA1.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA2.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA3.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA4.sgp.foobar.com
Regards,
Geoff

Best IOS version for 3750 switch

I have just received 2 3750 switches, but both have a different IOS version.
One has -> IOS version 12.1(19)EA1d
and the other has -> IOS version 12.2(25)SEB2.
I just want to use the switches as Gb collectors for a serverfarm seperatly (so no stack configuration) with a redundant uplink to my distribution layer.
Can someone advise my which IOS is the best for my network?
Thanx, Marty

Switch 1:
Cisco Internetwork Operating System Software
IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 05-Apr-04 22:06 by antonino
Image text-base: 0x00003000, data-base: 0x009206D8
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
2224-3750-037000137 uptime is 23 hours, 52 minutes
System returned to ROM by power-on
System restarted at 09:02:42 GMT Thu Aug 11 2005
System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"
cisco WS-C3750G-24TS (PowerPC405) processor (revision H0) with 118776K/12288K bytes of memory.
Processor board ID CAT0904X00B
Last reset from power-on
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
28 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:13:1A:65:50:00
Motherboard assembly number : 73-7058-12
Power supply part number : 341-0045-01
Motherboard serial number : CAT090400A0
Power supply serial number : LIT09020266
Model revision number : H0
Motherboard revision number : A0
Model number : WS-C3750G-24TS-E
System serial number : CAT0904X00B
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
* 1 28 WS-C3750G-24TS 12.1(19)EA1d C3750-I5-M
Configuration register is 0xF
Switch 2:
Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 08-Jun-05 01:19 by yenanh
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
2224-3750-037000138 uptime is 59 minutes
System returned to ROM by power-on
System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
cisco WS-C3750G-24TS (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.
Processor board ID CAT0925Z0WZ
Last reset from power-on
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:14:A8:71:CA:00
Motherboard assembly number : 73-7058-13
Power supply part number : 341-0045-01
Motherboard serial number : CAT09251J90
Power supply serial number : PHI09220165
Model revision number : L0
Motherboard revision number : A0
Model number : WS-C3750G-24TS-E
System serial number : CAT0925Z0WZ
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
* 1 28 WS-C3750G-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
Configuration register is 0xF

Is there a minimum IOS version for windows radius 2012R2

Hello,
We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
Thanks

Hi,
Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
check the below link.
http://msdn.microsoft.com/en-us/library/cc731363.aspx

Manadatory SP stack and which kernel version for source Release 4.6c

Hello!
I have the following questions:
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- Has the SAP Business connector still any supports?
And some additional question regardind connection Lotus Notes with ERP 2005:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
Axel

First I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
> Do you all do Unicode Conversion first before going for upgrade process ?
4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
Markus

Which Excel version for SEM-BPS 4.0?

Hello! Anyone knows which Excel version works best or is minimum requirement for SEM-BPS4.0 (together with BW3.5). The intended use is Excel planning within SAP GUI.
Thanks,
Auvo Ahola

At least Excel 2000.
Regards

Which IOS version for 3925 fixes CSCul63961?

Similar Messages

Maybe you are looking for