Which iOs version is supported?

Hi
I'm just wondering which version of iOs is supported by the 4.5SDK?
Regards,
Lars

i think it comes out in June right now it is Android only someone correct me if i am wrong !

Similar Messages

CS5.5 Air for iOs - Which iOs versions are supported?

Hi everyone,
I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
Suggestions?
Anyone tried on similar OS?
Thanks a lot
Iacopo

Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
Any news on this?
Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version. If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app. You will need to get a more up to date phone

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
Is this true?
If yes: Which XSLT functions of v2.0 are supported?
Does it matter if I change the
version="1.1"
attribute in the topmost
<xsl:stylesheet......>
tag?
Which XSLT processor is built-in/used?
Peter

XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

Which Vmware Version is supported by SAP HANA ???

Hi SAP HANA Experts,
We knew that now a days SAP HANA is supporting Vmware also to install it...
Can anyone provide which Vmware version is supported by SAP HANA for PRD & NON PRD Setup's

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Which iOS version is running on the iPhone 4s 8 GB 2014 version?

Hey !
I just wanna know which iOS version is preinstalled on the iPhone 4s 8GB they selling since this year.
Much thanks !

You are never forced to update. You would just need to live with whatever version was on it. However, I'd recommend against the 4S. 8gigs is not enough memory for most people. It's rarely a good idea to buy tech that's already been discontinued by the manufacturer.

Cisco IOS Version to Support SIP Trunking on AS5400 Routers

Hi all,
Kindly help .Can anyone tell me which Cisco IOS Version Supports SIP Trunking on AS5400 Routers ?
Regards,
Cliff .

Hi,
Please look at:
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_data_sheet09186a0080091e51.html
http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/UPfeapu.html
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Minimum IOS version to support scp URLs

While recent IOS versions support scp sources or destinations for copy
operations ...
   aprompt#copy running-config ?
     flash1:         Copy to flash1: file system
     flash2:         Copy to flash2: file system
     flash:          Copy to flash: file system
     ftp:            Copy to ftp: file system
     http:           Copy to http: file system
     https:          Copy to https: file system
     null:           Copy to null: file system
     nvram:          Copy to nvram: file system
     rcp:            Copy to rcp: file system
     running-config Update (merge with) current system configuration
     scp:            Copy to scp: file system
     startup-config Copy to startup configuration
     system:         Copy to system: file system
     tftp:           Copy to tftp: file system
     tmpsys:         Copy to tmpsys: file system
   aprompt#copy running-config
... older ones obviously don't (here we have 12.1):
   aprompt#copy running-config ?
     bs:             Copy to bs: file system
     flash:          Copy to flash: file system
     ftp:            Copy to ftp: file system
     null:           Copy to null: file system
     nvram:          Copy to nvram: file system
     rcp:            Copy to rcp: file system
     running-config Update (merge with) current system configuration
     startup-config Copy to startup configuration
     system:         Copy to system: file system
     tftp:           Copy to tftp: file system
     xmodem:         Copy to xmodem: file system
     ymodem:         Copy to ymodem: file system
     zflash:         Copy to zflash: file system
   aprompt#copy running-config
Who could tell me the minumum version to support scp URLs?
Thanks and Regards, Thomas

Ideally any feature set questions are answerable in Cisco Feature Navigator (http://www.cisco.com/go/fn).
The Secure Copy (SCP) feature provides a secure and authenticated method for copying router configuration or router image files. SCP relies on Secure Shell (SSH), an application and a protocol that provide a secure replacement for the Berkeley r-tools. So ideally you should be running crypto images (k9) which support SSH and hence SCP as well.
But following are some details about SCP, which may be helpful :
Feature Name
Releases
Feature Information
Secure Copy
12.2(2)T12.0(21)S
12.2(25)S
This feature was introduced in Cisco IOS Release 12.2(2)T.
This feature was integrated into Cisco IOS Release 12.0(21)S.
This feature was integrated into Cisco IOS Release 12.2(25)S.
The following commands were introduced or modified: debug ip scp, ip scp server enable.
Following is details Feature Information for Secure Shell Version 2 Support:
Feature Name
Releases
Feature Information
Secure Shell Version 2 Support
12.2(11)T
12.2(25)S
12.3(4)T
15.3(2)S
The Secure Shell Version 2 Support feature allows you to configure Secure Shell (SSH) Version 2 (SSH Version 1 support was implemented in an earlier Cisco IOS software release). SSH runs on top of a reliable transport layer and provides strong authentication and encryption capabilities. SSH version 2 also supports AES counter-based encryption mode.
The following commands were introduced or modified: debug ip ssh, ip ssh min dh size, ip ssh rsa keypair-name, ip ssh version, ssh.
Secure Shell Version 2 Client and Server Support
12.0(32)SY
12.3(7)JA
12.4(17)
The Cisco IOS image was updated to provide for the automatic generation of SNMP traps when an SSH session terminates.
SSH Keyboard Interactive Authentication
12.2(33)SXH3
12.4(18)
The SSH Keyboard Interactive Authentication feature, also known as Generic Message Authentication for SSH, is a method that can be used to implement different types of authentication mechanisms. Basically, any currently supported authentication method that requires only user input can be performed with this feature.
Secure Shell Version 2 Enhancements
12.2(50)SY
12.4(20)T
15.1(2)S
The Secure Shell Version 2 Enhancements feature includes a number of additional capabilities such as support for VRF-aware SSH, SSH debug enhancements, and DH Group 14 and Group 16 exchange support.
In Cisco IOS 15.1(2)S, support was added for the Cisco 7600 series router.
Note
Only the VRF-aware SSH feature is supported in Cisco IOS Release 12.2(50)SY.
The following commands were introduced or modified: debug ip ssh, ip ssh dh min size.
Secure Shell Version 2 Enhancements for RSA Keys.
15.0(1)M
15.1(1)S
The Secure Shell Version 2 Enhancements for RSA Keys feature includes a number of additional capabilities to support RSA key-based user authentication for SSH and SSH server host key storage and verification.
The following commands were introduced or modified: ip ssh pubkey-chain, ip ssh stricthostkeycheck.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Router platform and IOS version to support MPLS

I have few Cisco 2621 routers and one 3640 router, could I use these router to create a MPLS VPN lab? if so , what is the minimum IOS version required?
Thanks in advance.

The minimum hardware and software image tu support MPLS can be found at www.cisco.com/go/fn select search by feature and in the search box put MPLS (Multiprotocol Label Switching) there you can find the platform and IOS to support basic MPLS, but you need to consider the fact that supporting MPLS special features like AToM can only be supported on some 7200, 7500, 7600, 10000 and 12000, http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a0080153e64.html#1030652

How to Determine which IOS version is new

Hi
When I have a few IOS versions such as 12.3(2) , 12.3.(3)B and 12.3(2)T how do I know out of these three which one is the newest and which one is the oldest?
Also is there a 12.4 for the 2500 series routers?
Your help is much appreciated!
Many thanks!

Hi Omal,
To some degree you are comparing apples and oranges here. As mentioned by another poster, IOS is released in several different "trains," and it can be hard to compare between them. So, 12.3(2)T is a (T)echnology train, meaning it has new features and bug fixes integrated with each release. 12.3(2) by itself is a mainline train, which generally just has bug fixes committed. Cisco works on both trains at the same time, integrating bug fixes into mainline code, and new features and bug fixes into the T-train. In addition to "T", other letters are often placed at the end of the IOS release for specialized IOS's for certain product lines, such as the Cat 6K or 10000 series.
So, the short answer would be this: I recommend comparing IOS's within their train and not between trains. There can be substantial differences.
Are you looking at a bug and trying to determine where it is fixed, or is this just a general question?
Jeff McLaughlin, CCIE #14023
Cisco Systems

Compatible 6500 IOS version to support IDSM-2 Inline mode

The 6500 model WS-SUP720-3BXL with IOS version 12.2(18)SXD4,
and IDS card WS-SVC-IDSM-2 with sw 5.0(2)is compatible to run on inline mode.
Regards,
Viraj

Good day,
Hi, You need minimum sup-bootdisk:s3223-advipservicesk9_wan-mz.122-18.SXF7.bin IOS to enable INLINE mode on 6500 series.
as per my knowledge,
the latest IOS is
sup-bootdisk:s3223-adventerprisek9_wan-mz.122-18.SXF13.bin.
for IDSM-2, if u upgrade to Engine 2 IOS, U can get update with E2 signatures and also U can manage from New Management Console like Cisco IPS manager Express 6.1.
I hope this will satisfy.

IOS version that support 2048 bits certificate

Hello,
I need to update a 2504 Wireless Controller to a version that supports 2048 bits certificates.
I´m checking release notes for release 7.4.110.0 and I don´t see any information about a limitation in certification size (2048 bytes in my case).
Do you know any restriction about the certificate size in this or another version?
Thanks and Regards.
Iván.

2048 bit is supported on the WLC. I use it for WebAuth and 3rd party certificates as these vendors only issue 2048 these days.
Sent from Cisco Technical Support iPhone App

I am new to ios development and would like to know if I have to make my app compatible with iphone 4, 4S and 5 then which ios version i should choose?

I have started ios development few weeks back but I am not sure on which version of ios I should develop my apps. People are having different iphone (3g, 4, 4s, 5) and I am not sure that all of them have upgraded themselves to latest version of ios or not.
Would anyone please suggest here which verion of ios is more in use and if i develop my app on lower verion of ios then will that run on higher version or not?
Thanks.

I would target the latest version.
Adoption rate of iOS updates is high.
Since you're just beginning development, trying to support older versions of iOS adds unneeded complexity to an already difficult task.

Which AIR SDK versions will run which iOS versions

Where can I find information about which AIR SDKs can target each version of iOS.
Specifically, we are updating our app from AIR SDK 3.4 to the current 3.7; however, we aren't sure which versions of iOS the new SDK will work with.
There is an air faq (http://www.adobe.com/products/air/faq.html#) which states that "Adobe AIR 3.5 supports iOS 6", but my question concerns how an AIR app produced for the newer iOSs will run under older iOSs.
Thanks!

iCloud Mail setup, even in 10.4/10.5…
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

Which iOs version is supported?

Similar Messages

Maybe you are looking for