Which ipaddress which user use in domain enviroment without sccm

How to know which user which ipaddress use in dmain environment without sccm if any command available or if any free software.
Ananda

Hi lyncLab,
You may take a look at this thread:
How to find user's IP on domain network ???
Besides, if you have PC's hosts name, then you may take use of NSlookup to find the IP address:
Nslookup
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to determine which user uses which database-object

Hi,
currently we are in the process of consolidating our databases. One of the neccessary steps is to figure out which user connects to the database at all. That's easy, we implemented a logon-trigger and log the collected information into a separate table.
If a user with objects (e.g. tables, views, procedures) exists - but this user never connects to the database - does that automatically mean that these objects are not used at all? No need to say that this is not true. But how can we figure out if a connected user has selected an object of this user?
Our porblem is that we have alot of schemas in our database - but the developers don't know if this schema is not used by an application or not (sad but true).
To enable auditing would be one choice to figure out if an object was ever used or not.
Are there any other possibilities?
Any help will be appricated
Rgds
Jan

VivaLaVida wrote:
Hi,
currently we are in the process of consolidating our databases. One of the neccessary steps is to figure out which user connects to the database at all. That's easy, we implemented a logon-trigger and log the collected information into a separate table.It could have been even easier by turning on the built-in audit feature.
If a user with objects (e.g. tables, views, procedures) exists - but this user never connects to the database - does that automatically mean that these objects are not used at all? No need to say that this is not true. But how can we figure out if a connected user has selected an object of this user?audit would be a good choice.
Our porblem is that we have alot of schemas in our database - but the developers don't know if this schema is not used by an application or not (sad but true).Not sure what developer will do with used/not used application.
To enable auditing would be one choice to figure out if an object was ever used or not. What's wrong in auditing ?
Even though audit may have a footprint on performance, that would probably be less costly than any custom solution.
Nicolas.

How can I keep track of which users use which machines

Hello!
I'm notice that we have one machine in our labs that is constantly getting the keyboard damaged by one of the students. We use an Open Directory system to allow the students to log into any available machine, but how can I log which users are using that particular machine??
Thanks!

hi,
try "last" in the client's terminal. is this what you are looking for?
cheers,
Michael.

How Know which user use the maximum CPU time

Hi Gurus,
I am looking now a days on our production server CPU utilization usage mostly 90-100%.
How I found which user usages maximum CPU utilization.
I know the which application takes the max Util but how User not identified. (ST06-Top CPU Users)
Pls help.
Thanks
Tapo Vardhan singh

If your production system CPU usage is 100% then you are very likely to face performance problems or in fact you must be facing them now.
SAP recommended CPU usage is about 40% (ofcourse depends on many other factors) but 100% CPU utilization is not a convincing figure.
Get hold of your earlywatch reports and implement suggestions as soon as possible. Possibly you would want to hardware upgrade/move your production system after doing sizing exercise.
Good luck.

How to find which user using Grid?

Grid contril 10.2.0.5
I have over 50 users in Grid, how can I figure out who is online?

Run the below queries to see all connected users in the Grid database...
set lines 100 pages 999
col ID format a15
select username
, sid || ',' || serial# "ID"
, status
, last_call_et "Last Activity"
from v$session
where username is not null
order by status desc
, last_call_et desc
--See the users current sql
Select sql_text
from v$sqlarea
where (address, hash_value) in
(select sql_address, sql_hash_value
from v$session
where username like '&username')
--Time since last user activity
set lines 100 pages 999
select username
, floor(last_call_et / 60) "Minutes"
, status
from v$session
where username is not null
order by last_call_et
Hope this helps...
Regards,
http://www.oracleracexpert.com
Click here to [Click here to remove parameter from spfile|http://www.oracleracexpert.com/2009/09/create-spfile-from-pfile.html]
Click here to learn [SPFILE and PFILE in Oracle|http://www.oracleracexpert.com/2009/11/oracle-spfile-and-pfile.html]
Click here for [Using UTL_MAIL in Oracle 10g |http://www.oracleracexpert.com/2009/11/send-email-using-utlmail-in-oracle-10g.html]

IIS Anonymous User using Plumtree Domain Account

Is it good or accepted practice to create a Plumtree domain account and have the remote portlets (web apps) use this username / pwd instead of the anonymous user (IUSR_MACHINE) accounts? Then we would only need to grant acess to the Plumtree domain account on file shares, etc.

The anonymous user for IIS should not be a domain user. It should be a local account and given minimal rights.
Michael [email protected]

How to find which devices are still using affected domain controller

Hi Everyone,
We have a 5 Domain controller's in a Site. And we are going to decommisson one of our affected DC in a site.
Can you please let me know how to find the log files to see which devices are still using this domain controller.
Regards,
Neel kamal
Neel kamal

Neel,
From strictly an Active Directory perspective, there is nothing special you need to do to decommission a domain controller in a site. There are many processes that automatically balance out and recreate connections as needed without any user intervention.
The DC Locator process will automatically direct clients to active domain controllers, there is nothing you need to do here.
What you need to be concerned with are things like the following:
DNS - Are you running AD integrated DNS and is the DC you are decommissioning hosting that roll - if so, is it the ONLY DC in the
site that is running DNS? You'll need at least one in the site.
DHCP server - Is the DC you are demoting a DHCP server? You'll need to account for that.
Global Catalog - Is the DC you are demoting a Global Catalog server? You'll need at least one in the site.
File Shares - Is the DC hosting any files shares? You'll need to move those and make sure you redirect your clients.
Was this DC a set as a Preferred Bridgehead Server? You'll need to undo that first.
Those are the big ones that come to mind. Decommissioning a DC is easy if you have prepared properly. The others that have replied have offered some great advice which you should follow. Do your homework and you should be fine.
Hope that helps
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

no, when using facetime you log in with the apple id you want people to reach you at, so unless you both agree to share one apple id for all the facetime you do, it will be necessary for you to logout and login each time you use the application.

I have to find out which user exit useing

Hi All,
functional consultant useing user exit ,for substitution of profir center.
can any body plz tell ,which user exit he useing to get profit center value.
thanks,
venu.

For substitution Tx:GGB1 is used. go to the tx, select FI accounting, line item, Step, double click on substitution, u'll find user exit like U100, double click on it, thats the code used for substitution.
If its different functionla area, select it instead of FI in GGB1
Tx: GCX2 shows the Z program (like ZGGBS000) used for substitution.
Regards
Sridhar
Message was edited by: Sridhar K

How find out which user is using which company code?

Hi Gurus,
I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
Is it possible to get it from a single table or Tcode?
Best Regards,
Rahman

Hi,
Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
Regards,
Rahman

Which user is used to execute command defined in File Adapter?

Hello,
in my receiver file adapter I specified a OS command to be executed after message processing. However this command doesn't get executed. After investigation I figure out that it's because the user that is used to executed the command does not have enough authorization to run the program (It's a unix system).
So anyone knows which user is used to execute the command? Or anyone know how to go around this security issue with OS command in Unix system?
Thanks
Eric

Hi,
As Bhavesh replied you earlier the OS command is executed by the user <sid>adm in Unix or SAPService<SID> in windows.
Do check the note 841704 - XI File & JDBC Adapter: Operating system command.
From Note 841704
Also note that the command is run as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
Thanks
SaNv...

Which user id is used in each data source?

Using SQ: SSRS 2008 R2 - Beginner - Is there a report or query that provides which user ID is associated with the data source of each report? I need to be able to list out all the data sources being used and which user id is being used in the data source
configuration instead of going to each report and using manage to review this. Any help is greatly appreciated

Thank you - This is useful - but the username column is encrypted - how do I unencrypt
as per my knowledge there is no way to decrypt it and below link confirm my understanding :)but there is work around also that have shared on technet;
https://social.msdn.microsoft.com/Forums/en-US/f65b4d50-abaa-400b-a09d-ae1d7d1ea041/decrypt-the-connectionstring?forum=sqlreportingservices
WITH XMLNAMESPACES -- XML namespace def must be the first in with clause.
(DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2006/03/reportdatasource'
,'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner'
AS rd)
,SDS AS
(SELECT SDS.name AS SharedDsName
,SDS.[Path]
,CONVERT(xml, CONVERT(varbinary(max), content)) AS DEF
FROM dbo.[Catalog] AS SDS
WHERE SDS.Type = 5) -- 5 = Shared Datasource
SELECT CON.[Path]
,CON.SharedDsName
,CON.ConnString
FROM
(SELECT SDS.[Path]
,SDS.SharedDsName
,DSN.value('ConnectString[1]', 'varchar(200)') AS ConnString
FROM SDS
CROSS APPLY
SDS.DEF.nodes('/DataSourceDefinition') AS R(DSN)
) AS CON
-- Optional filter:
-- WHERE CON.ConnString LIKE '%Initial Catalog%=%TFS%'
ORDER BY CON.[Path]
,CON.SharedDsName;
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Am a new user - iPad3. As my Apple ID I used my Yahoo!Mail address and but used adifferent password to that which I use on Yahoo. In my icloud email account Account shows as my Yahoo mail address but neither my Apple password nor my Yahoo pasword work.

Am a new user - iPad3. As my Apple ID I used my Yahoo!Mail address and but used adifferent password to that which I use on Yahoo. In my icloud email account Account shows as my Yahoo mail address but neither my Apple password nor my Yahoo pasword work. I am also unable to open any other mail accounts such as gmail. Can anyone help please?

Sign out and sign in with new Apple ID
Settings>iTunes and App Store>Apple ID

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

Which user to be used in SAP IDES

Dear Freinds,
I have got installed SAP ECC6.0 in my personnel laptop. Could any one please let me know which user i can use
to do my SAP SD configuration or could you let me know which id profile i have to copy to my id in sap IDES system.
Regards
Syamala

Dear Prashant,
Thanks for letteing me know the user SAPUSER , but is there any default pwd will be there for it . Becuase when
i logged in as DDIC i coudlnt see this user - SAPUSER in the transaction SU01 . Please could let me know .
regards
syamala
Edited by: MSyamala on Sep 2, 2011 4:08 PM

Which ipaddress which user use in domain enviroment without sccm

Similar Messages

Maybe you are looking for