Which is best web service framework for developing web services in Java?

Hi Friends,
I want to develop web services using Java 1.5.
But I am in confusion with different frameworks provides to develop WS.
Like
1) Apache axis
2) Java Web Service dev. Pack
3) JSON-RPC-Java
4) Web Ser. Invocation Pack
5) XFire
Can some one guide which framework should I use?
OR where will i get useful comparison between this frameworks?

Hi,
Personally I have used:
1. XFire
2. Apache Axis
3. Java Web Service Pack
My personal opinion / .02 cents?
1. XFire is awesome and very easy to set up and get running. They also have a great community / mailing lists. We use it in some production systems and it runs great.
2. Apache AXIS 1/2 made me want to dive out the window and go splat just short of the double yellow line on the road. Pain in the butt to set up and get running. Way too complex. Really bad docs / tutorials / support.
3. Java Web Service Pack - I really prefer NetBeans 5.5 and the JWSP. Easy to build services, cohesive enviroment. You can get the job done.
That's my two cents.
M Goodell

Similar Messages

The Best Java Web Services Technology for Developing Web Services

Hi,
I am new to Web services world.
I read the java web services page . there are more than 6 technologies.
JAX-WS,
JAX-RPC,
JAXB,
SAAJ,
JAXP,
WSIT,
XWS-Security
I went through several documents on web services.
I could not get a clear idea of which technolgy to use.
Which Java web service technology will be the best to develop web services independant of language, platform.
or is there any 3rd party implemetations available ? for rapid development of web services.
Could anyone help me !.
Thanks in advance.
Message was edited by:
Siva.Prakash

Which Java web service technology will be the best
to develop web services independant of language,
platform.
Java by nature is a cross-platform language, so if your focus is on the need for portability, the choisce of WS should not be a problem. However, each WS is best suited for paricular uses.
SAAJ, a low-level level API, offers much simplicity, but is not the first choice for programmers, as SOAP (Simple Object Access Protocol)messages need to be constructed piece by piece, making it a quite arduous code to program.
If you are not familiar with XML, your best bet would be to use JAX-RPC (Java API for XML-Remote Procedure Calls), as it hides the underlying detail from the programmer, in terms of SOAP and XML. The shortcoming with RPC-based WS is that it is "restricted to the local programming experience". Another failing is that assumes there is a network path- a reliability concern.
If your program will be contacting other services during downtimes, unlike JAX-RPC, JAXM is quite useful. However, your listing did not mention it, so I wont cover it.
JAXR is a client-side only API that acts as an interface between registries (not referring to JAXP)
I am not famiiar with JAXB, JAXP, WSIT or XWS-Security..
or is there any 3rd party implemetations available ?It depends on what platform you are used to. Assuming you are familiarized with the J2EE platform (now changed to Java EE SDK), the NetBeans IDE (either 5.5, 5.5.1 or the latest editiion) is quite useful. I am using 5.5.1, but have found that it is quite buggy, especially when adding WS operations, a core requirement of a WS. if you will be using to devlop a service for an immediate need, you may find the learning curve to be a bit high, in terms of getting to grips with how to use it. (Download link:
http://www.netbeans.info/downloads/index.php)
The IBM Autonomic IDE (or AIDE), based on the WSDM standard, includes 3 sub-tools, icluding the IBM Manageability Endpoint Builder which, according to their website, allows individuals to build endpoints to allow manageability interface exposure; Manageable Resource Browser and the IBM Manageability Endpoint Simulator. However, I'm not familiar with this IDE. (Download link: http://www.alphaworks.ibm.com/tech/aide/download)
The .NET Framework uses the Visual Studio IDE. For an unbiased comparison of J2EE and the .NET Framework in terms of WS, see http://www.webservicesarchitect.com/content/articles/hanson01.asp.
Apache Axis2, Geronimo and JiBX allows fast development of WS, or so the creators profess.
The PHP environment- you could try NuSPHERE PHPed. According to one website, with it you can develop a web service in under an hour.
I hope this was useful to you.
[Based partly on Topley, K. (2003) [i]Java TM Web Services in a Nutshell: A desktop Quick Reference. 1st ed. California: O�Reilly & Associates, Inc]

Please give me your opinion... about tools for develop web service

If you would like to choose the tool for develop web service.
what is the most important feature that you will consider,
Please help me to order these topic from the most to the least
a. creating web service
b. creating web service client
c. searching web service to UDDI registry
d. publish web service to UDDI registry
e. connecting to database management systems.
f. license fee
g.system requirements
h. Installation procedures
thank you very much for your opinion. I will keep your information for my research....
:)

Hi Fangnaka,
You can use JWDSP2.0 + Tomcat 5.X +Jdk1.5 to develop and deploy webservice.
Better IDEA are Intellij or Eclipse for webservice code development.
Cheers
Rajesh R

One Search service application for multiple web applications in a single server

We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one Search service application , create a Content source for each web
application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one Search Service application for all web applications and using Result sources ,
I am not getting the results. What could be the problem.

Hi,
One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
Multiple SSA's will eat up RAM/CPU like a mother :)
As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
Thanks,
Mikael
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

Create adaptive web service model for a web dynpro project

I have been trying to create a new new adaptive web service model for a web dynpro project.I am using the URL of the wsdl file to create the model. I have copied the url link of the wsdl from the overview tab of the web services navigator. The web service works fine when tested through the Netweaver Navigator. This web service has also been used successfully through the Visual Composer. But when I try to create a model for this web service URL, when I click the Next button after entering the URL in the model creation wizard step 4 , I get "Error loading wsdl file. Check error log for details" Given below is the exception recorded in the error log: (Infact, I get this for all wsdl URLs)
!MESSAGE Jun 6, 2007 9:44:59 AM           com.sap.ide.webdynpro.ui.service.ServicesUI          [Thread[main,5,main]] Error: Internal error
   Plugin name: Web Dynpro Model Editor
   Plugin ID : com.sap.ide.webdynpro.modeleditor
   Class      : com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS
   Method     : loadNameSpacesAndModelClasses
   Message    : Cannot load NameSpaces and ModelClasses
Class Path: C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;
java.home: C:\java\j2sdk1.4.2_09
proxyHost:
proxyPort:
nonProxyHosts:
Temporary Directory: C:\DOCUME1\E51914\LOCALS1\Temp\
WSDL URL: http://etcvpcod108:50100/UserService/Config5?wsdl
   Exception : com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL http://etcvpcod108:50100/UserService/Config5?wsdl and service factory configuration {DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}
!STACK 0
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://etcvpcod108:50100/UserService/Config5?wsdl' and service factory configuration '{DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\java\j2sdk1.4.2_09, DynamicProxy.TempDir=C:\DOCUME1\E51914\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}'
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:371)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:341)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:305)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:315)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
     at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
     at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
     at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
     at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:49)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:411)
     ... 53 more

Hi Srikanth,
My version was
Version: 7.0.09
Build id: 200608262203
I was able to successfully import the model after I did the following
1. Re intsall Studion (same version , same build)
2. Reset the proxy settings to not use Proxy server
Thanks for looking into it though...
-Lakshmi

Service wrapper for a web service

Hi All,
How can I create a service wrapper for a web service.
Thanks
Gopal

Create a Message/ Service Interface for your web-service....it is the service wrapper.

What is the best practice for developing web service?

Hi All,
I'm a newbee to web services...
I was wondering what would be the best approach in developing a web service,
using tools or programmatic approach?
If I use WebLogic Workshop, am I tied to a vendor?
Is it possible for me to develop web services using workshop and deploy in
another app server..?
I would appreciate if somebody could give me a pointer to start.
I have already referred BEA's docs.
I'm still confused on a good starting point on the best approach to develop
protable web services.
Thanks in advance for any inputs.
K K

K K-
You have a very valid point on the simplify or complicate matters. If you are
going for clean and not-so-time-centric code, then there are several different
programs and packages out there you can choose from.
Since you are specialized in J2EE, than the Sun package may be what you are looking
for. BEA's classes simplify much of the work you will be doing, but you could
emulate their classes or extend yours above the functions provided in theirs.
It all boils down to how much work are you willing to do.
If you are asking for more detailed, coding 'Design Patterns' to utilize, I would
wait for a few more posts from other folks as my work often requires me to utilize
the tools provided.
Sincerely,
Eric Ballou
"K K" <[email protected]> wrote:
Eric,
Thanks for the response.
I was also looking at Sun's WSDP 1.1, which is more programmatic approach.
Some how, I feel being a J2EE developer, I should go on the direction
of the
programmatic approach.
Using the tools could simplify or complicate things. Also, the Workshop
samples import all weblogic specific packages.
My code looks so dirty with many vendor specific packages being imported.
Could you give me your suggestions for a clean and neat approach?
I would personally prefer to avoid the quick and dirty approach.
Thanks again.
"Eric Ballou" <[email protected]> wrote in message
news:[email protected]...
K K-
The best approach in developing portable web services is knowing whatyou
are
planning on using them for as well as how much is willing to be spent,etc.
BEA's Workshop is portable to other frameworks, but the ease ofintegrating a
developed client or a developed server can very greatly. Even moreof an
issue
is migration from one framework to another. If you choose to developin
Workshop
and your company later deploys .Net solutions, some of your work mayhave
to be
redone unless the company is willing to keep portions of the 'old'system
around
until new versions of the service are available. However, Workshophas
several
ant tools available that would assist you in deploying to other appservers or
even a stand-alone application should you need cross framework abilities.
If you are just starting out in web services, http://www.webservices.org
is a
good place to start checking out vendors in the space.
Sincerely,
Eric Ballou
"K K" <[email protected]> wrote:
Hi All,
I'm a newbee to web services...
I was wondering what would be the best approach in developing a web
service,
using tools or programmatic approach?
If I use WebLogic Workshop, am I tied to a vendor?
Is it possible for me to develop web services using workshop and deploy
in
another app server..?
I would appreciate if somebody could give me a pointer to start.
I have already referred BEA's docs.
I'm still confused on a good starting point on the best approach todevelop
protable web services.
Thanks in advance for any inputs.
K K

Using Web Dynpro authentication for a Web Service call

Hi all,
I want to develop a Web Dynpro that calls a Web Service running on the same Web AS (7.0). The Web Dynpro will be integrated in a Portal. The web service that has to be called is automatically generated when we create a guided procedure :
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/44c59fd7c72e84e10000000a155369/frameset.htm
In my Web Dynpro, I imported the WSDL of this WS and created a model.
The first time I tried to call the WS in my Web Dynpro I got an authentication error :
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<myHostName>:50100/GPRuntimeFacadeWS/GPProcessExposing?style=document&pid=CA544E9B629A11DB91480017A48D672A&pver=0.5"
So I hard-coded an HTTP authentication :
     model._setUser("myWASuser");
     model._setPassword("myPassword");
And the Web Service call now works.
Now the next step is that the WS call is made by the user that runs the Web Dynpro. So I found this documentation :
http://help.sap.com/saphelp_nw04/helpdata/en/59/e8e95d1eba48dfa86ae91ad8816f5d/frameset.htm
It would resolve my authentication problem, AND the transport issue : at the moment the Web Service URL is stored in the Logical Port of the WD model, and at transport time, a rebuild of the WD project will be needed.
So I applied what is said in the doc : from the point of view of the Web Service consumer, I just had to add :
    model._setHTTPDestinationName("STARTGP");
(where STARTGP is the name of the destination I created in the Visual Administrator with a "Logon Ticket" authentication.)
before the execute(), and I removed my hardcoded authentication.
Unfortunately, nothing changes... I still get a 401 authentication error.
Does anyone have an idea about this ? Or maybe a workaround ?
Thanks in advance for any suggestion.
Regards,
Julien

Hello Julien,
I have a scenario similar to yours. A client webdynpro application accessing a EJB methods exposed as web service. Those EJB's methods calls R3 RFC's. The client requirements' was to allow SSO through all the layers (Webdynpro -> EJB WS -> RFC). The Webdynpro and EJB's are deployed on the same WAS.
Solution:
1 - Create a RFC Destination on Visual Administration provide the R3 connection parameters and set the Authentication for "Current User (Logon Ticket)". Save your Destination;
2 - In your EJB Project open your Web Service Configuration, on the Security page, set:
    Authentication Mechanism: HTTP Authentication
    Basic (username/password)
    Use SAP Logon Ticket
3 - In your EJB, implement the following code to create JCO Client for the RFC invocations:
Object obj = ctx.lookup(DestinationService.JNDI_KEY);
    DestinationService dstService = (DestinationService) obj;
    RFCDestination dst = (RFCDestination) dstService.getDestination("RFC", "<YOUR_RFC_DESTINATION_NAME>");
    Properties jcoProperties = dst.getJCoProperties();
    JCO.Client jcoClient = JCO.createClient(jcoProperties);
4 - In your EAR Project, open your "application-j2ee-engine.xml" and add the References:
     "tc/sec/destinations/service" as Service
     "tc/sec/destinations/interface" as Interface.
5 - Create your EAR File and Deploy;
6 - Check if the web service now requires Authentication: go to http://<host>:<port>/index.html and click on Web Services Navigator. Test your Web Service. Your Web Service should requiere you to log in before execute the test;
7 - Go back to your Visual Administrator and create a HTTP Destination. Provide your WS URL (should be something like "http://<host>:<port>/<WS_NAME>/Config1?style=document"). Choose Authentication: Logon Ticket. Save your Destination;
8 - Go to your webdynpro project, import your WS Model. (If you have already created it, you have to delete it and import it again, refer to this blog on how to reimport WS Models: /people/bertram.ganz/blog/2005/10/10/how-to-reimport-web-service-models-in-web-dynpro-for-java How To Reimport Web Service Models in Web Dynpro for Java );
9 - Open your model's Logical Ports node, go to the Security tab, and choose "Use SAP Logon Ticket";
10 - In your webdynpro code, before you call the ws invocation (should be something like that: <YOUR_NODE_DEFINITION>.modelObject().execute();), include the following line:
<YOUR_NODE_DEFINITION>.modelObject()._setHTTPDestinationName("<YOUR_HTTP_DESTINATION_NAME>");
11 - Save All Metadata and deploy your Webdynpro App. Test your results.
I hope it helps you, as the documentation on how to implement this scenario is scattered through the SDN and all the SAP help portal.
Best regards,
Paulo.

Iphone just for development (no service)?

Is it possible to buy an iphone without service, and then use that iphone for development?
Will an iphone without service still work with XCode to test apps?
Can you still update iphone OS (without service) when new OS versions are released?
Will an iphone without service still function like an ipod touch (everything works except phone stuff)?
What's the best way to buy an iphone without service? Should i just buy via AT&T and pay cancellation fee?

If you buy a first-generation iPhone used, you can connect it to your computer, provision it for development, and install the provisioning profile through Xcode. That will add a "Dismiss" button to all the "waiting for activation" dialogs so you effectively don't need to activate the phone. I did this with 2.0 for a few weeks, and there were a couple gotchas (make sure you don't leave airplane mode on when you upgrade the firmware!) but it worked pretty well overall. I ended up getting service for the phone before 2.1 came out, but I'm not aware of that having changed.
However, I've seen warnings in the development portal that this won't work with OS 2.2. I don't know if this is just during the beta or if the final version will behave this way too. There does seem to be a workaround right now, but they might close that loophole.
Do note that if you're in the U.S., you can get an original iPhone data plan if you're activating an EDGE iPhone. This will cost $10/month less than an iPhone 3G plan. If you talk with AT&T you might be able to make other arrangements (I think there's an even cheaper plan available for the deaf that doesn't include voice calls), but I don't know the details of any of that, nor do I know what may be available in other countries.
Honestly, though, your best bet if you're an individual developer might be to get a family plan and put both your regular phone and your development iPhone on it. One thing you'll need to test is how your app behaves when it's used during a phone call, and the only way to do that is to have an iPhone with phone service. Similarly, you'll need to test how usable your app is when it has little bandwidth or a poor connection or just in direct sunlight at midday, and having EDGE access will help you with that. If your product is even marginally successful, the service will pay for itself.

Enable Web Service access for a Web service-enabled client

Hi,
I want to access data in Oracle CRM On Demand from a Web services-enabled client. The "Oracle Web Services On Demand Guide" suggest the Web Services Access should be granted by Customer Care representative. By default, this access is enabled for the Administrator role for new companies. However my admin account can't access web services from a web enable client.
Can anyone please suggest me the setting/step that i need to enable Oracle On Demand Web service access from a Web services-enabled client?
Note: I am new to oracle on demand so my query can be a silly thing.
Thanks & Regards
Ravish

I was able to resolve this issue. Actually, i was trying with trial account that don't allow the OCOD web service integration.

Best Practices of security for develop applications

I need information about a model to use for develop application using Forms and Reports. I read many documents about best security practices for database, but I donÂ´t find information about how can I join the database security with my software, and how can I establish an standard for my programmers.
Thanks you for your help.

There are a number of levels of implementation pain here-- best practices in a Fortune 500 company, for example, are likely to require a lot more infrastructure than best practices in a 5000 person organization. A Fortune 500 is also much more likely to have requirements based on the needs of a security team separate from the DBA group, requirements about auditing, etc.
At the high end, everyone in your organization might be an enterprise user authenticated against a LDAP repository (such as Active Directory) with a variety of functional roles granted to those users and potentially something like fine-grained access control in the database. Depending on how applications are deployed, you might also be using proxy authentication to authenticate these individual users.
Deploying this sort of infrastructure, though, will be somewhat time intensive and will create a degree of administrative overhead that you may not need. It will also potentially require a decent investment in development costs. Your needs may be far simpler (or more complex), so your security model ought to reflect that.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Web-service client for legacy web service

I currently access a legacy server (Lotus Domino 7) via CORBA. I thought a web service (my second) would be faster, but a whole day's research has uncovered only obsolete or trivial examples.
The WSDL generated by the server is rpc/encoded so wsimport cannot generate the necessary "artifacts" for a web service client.
The web service is simple: it accepts two java.lang.Strings, and returns a java.lang.String of XML. The "dynamic proxy" approach from 1.4.2 seems to have disappeared; I was hoping that approach would let me just hand-code a single "artifact" - an SEI based on the method information in the WSDL.
1) What classes in JAX-WS will let my web service client communicate with rpc?
2) With such a simple signature, do I need any other "artifacts" beyond an SEI?
Thanks for any help!

In case anyone's search leads them here, I've posted the solution at:
*[http://www.pby.com/general.nsf/webarticles/dominowebservice01]*
It is an exhaustive article (not "Hello World"!) that goes through several versions of the web service and client - hopefully explaining all* pieces of the puzzle:
~ web service code,
~ WSDLs
~ schema
~ thoroughly-documented clients that do and do not use JAXB
~ ... that use generated artifacts
~ ... that customize existing POJOs
~ the SOAP messages generated in each direction
~ the necessary JAXB annotations
~ explanations of how the code works
~ explanations of how namespaces affect the code
~ on and on and on...
My constant goal was to write an uncomplicated solution that uses as few artifacts (two) and annotations as possible. The end result is a small, fast JAX-WS 2.0 client that uses JAXB to invoke and consume a secured Domino 7 (1.4.2 JVM + AXIS) web service, using RPC/literal SOAP messages.

Creating Web Dynpro Adaptive Service Model For BW/BI Service.

Environment is BW 3.5 and Netweaver O4s SP12
I would like to create a Web Dynpro Adaptive Service Model based on BW Service.
Can this be done or is XMLA required? If I use XMLA I would like to know how this could be converted into a suitable model object to incorporate the results in Web Dynpro?
Thanks.

Even I faced the same problem , while running the project it was failing , the error was
=================================================
The initial exception that caused the request to fail, was:
   java.io.IOException: Cannot connect to http://www.dataaccess.nl/wk2006/footballpoolwebservice.wso?wsdl: www.dataaccess.nl
    at com.sap.engine.services.webservices.tools.WSDLDownloadResolver.resolveEntity(WSDLDownloadResolver.java:161)
    at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1019)
    at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1126)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:178)
    at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:147)
    ... 43 more
==============================================
but after setting the proxy details in the visual administrator it started working , this threads details was helpful for me to solve my problem.
thanks ,
Madhusudhan

Web Service documentation for all Web Services

Hi,
In March there was a documentation released named "Shop Floor web service field guide".
Unfortunately this only documents a few of the available Web-Services.
I would like to know where I can find:
1) Documentation for other web-services that were part of previous DataExchange XML.
Like BomProcessingInBinding, ItemProcessingInBinding.
2) Updated document for "Shop Floor web service field guide" since I only have the first version. Or information
if there has been no updating. Can't seem to find this document when searching in SAP Support Portal.
Br,
Johan

Hi,
Plese find below service market place link below
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179414&_HIER_KEY=601100035870000222244&_HIER_KEY=601100035870000235182&_HIER_KEY=701100035871000565647&_OBJECT=011000358700000709862011E&_SCENARIO=01100035870000000112&
Thanks,
Ramesh

Best settings to export for the web?

Hey everyone,
What do you think is the best setting to export video to web? I export now using quicktime and once in a while (I would like to use it more often since its much easier) compressor. So what is the best settings to export video to the web without having it get all blurry? I also use an XL2 so the video is good.

JB
but I'm concerned about whether H264 is accessible by an audience outside the Mac umbrella.
They need QT7 installed.
You can get Flip4Mac and add WMV export capabilities to QT. I'm sure that with a little of experimentation you'll get good results and the needed component isn't expensive.
Hope that helps !
Alberto

Which is best web service framework for developing web services in Java?

Similar Messages

Maybe you are looking for