Which is more powerful the old flat airport extreme or airport express

Which is more powerful the old flat airport extreme or an Airport express

The transmit power is the same on both the Airport Express and AirPort Extreme.
However, the AirPort Extreme has a better antenna arrangement than the Express, so it would normally provide a bit better range, all things being equal.
Depending on what version of the AirPort Extreme and AirPort Express that you might have, there may be some feature and performance differences in regard to wireless speed capability.  In order to quantify that, we would need to know the exact model number of the AirPort Express that you are asking about, as well as the exact model number of the AirPort Extreme.
The model numbers of both products are found on the side or bottom of the device. Both models numbers start with an "A" followed by 4 numbers.
It would help if you could provide some idea of what your actual goal might be here, since a "better" signal does not necessarily mean that you would notice any difference in day to day performance.

Similar Messages

  • Which is more powerful?

    I am thinking about purchasing a new MacBook Pro here soon which I will be using for some processor and graohics intensive stuff. I am wondering which one is more powerful, the baseline 13 inch MacBook Pro with Retina Display or the baseline MacBook Pro 15 inch without Retina Display. I am having trouble deciding because one has a quad core i7 but the other is solid state. But which one would have more power for processing and graphics?

    The baseline retina MBP has a slightly faster CPU and the more powerful discrete GPU (1 GB of dedicated video RAM vs. 512 MB video RAM). The integrated GPUs are the same.
    The baseline retina is more powerful (and has the SSD standard).
    rMBP:
    2.4GHz quad-core
    Intel Core i7 processor (Turbo Boost up to 3.4GHz) with 6MB shared L3 cache
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
    MBP:
    2.3GHz quad-core
    Intel Core i7 processor (Turbo Boost up to 3.3GHz) with 6MB L3 cache
    Intel HD Graphics 4000 (all 13- and 15-inch models)
    NVIDIA GeForce GT 650M with 512MB of GDDR5 memory and automatic graphics switching (2.3GHz 15-inch model). The optional 2.6GHz and 2.7GHz 15-inch models come with NVIDIA GeForce GT 650M with 1GB GDDR5 memory.
    I thought you were comparing both 15'' models. Misread the OP.
    Message was edited by: nbar

  • How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

    How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How do I resize the window of pages in the new version? It takes up most of my desktop. I would like to make it tall and narrow, which was possible in the old pages, but I cannot seem to do it in the new version.

    How do I resize the window of pages in the new version? It takes up most of my desktop. I would like to make it tall and narrow, which was possible in the old pages, but I cannot seem to do it in the new version.

    I agree it is a very bad and wasteful design especially for users on small laptop screens.
    You can drag it to whatever shape you want from the bottom left corner.
    Click on the paintbrush to make the Format side panel disappear. However you will need to use that side panel for most formatting.
    Peter

  • My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

    My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.

    This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • HT1595 I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    No, you cannot seperate the audio and video stream.
    You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
    jules

  • How do i use my time capsule and extend the network with airport express

    I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

    Use the search as this has been done to death ..
    Bob Timmons is the expert on this.. look at his answers here.
    https://discussions.apple.com/thread/4274187?start=0&tstart=0
    https://discussions.apple.com/message/21856077#21856077
    This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
    Apple doco is also good to read.
    http://support.apple.com/kb/HT4145
    http://support.apple.com/kb/HT4259
    Note.
    You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
    All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

  • I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

    Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
    Any suggestions.

    It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
    I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
    SNR (in dB) = Signal (in dBm) - Noise (in dBm)
    You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
    ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
    While your still in the System Profiler, note the value for Transmit Rate.
    These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
    SNR Guideline
    40dB+ SNR = Excellent signal
    25dB to 40dB SNR = Very good signal
    15dB to 25dB SNR = Low signal
    10dB to 15dB SNR = Very low signal
    5dB to 10dB SNR = No signal
    Please post back your results.

  • Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection?  Any answers specific to Japan would be helpful.

    Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection?  Any answers specific to Japan would be helpful.  I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates.  However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

    I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
    Any ideas?

  • Sharing a 3G usb modem on the iMac via Airport Express

    Hi,
    I would like to be able to share my 3G/HSDPA USB Modem that is currently connected to my iMac over the Airport Express wireless network at home. The objective is to let every computer (PC and Mac) connected to the wireless network (Airport Express) to be able to access the internet via the iMac 3G/HSDPA connection.
    I could have shared the 3G connection directly via the Internet Sharing, but this would require the computers to switch wireless network.
    Can anybody describe on how to achieve this?
    Regards,
    Hindra

    Finally, after several tries with the guidance of Duane's posts on how to set it up, I got this to work.
    Objective: To be able to share a 3G wireless connection connected to an iMac using 3G USB Modem with the rest of the network connected via wireless Airport Express.
    {Internet} <---> 3G USB Modem <---> iMac <---> Airport Express <---> Other computers (PC and Mac)
    1. Set the Airport Express to Join a Wirelss Network, and name the network to be the same name as the name of the network set in the Internet Sharing (on the iMac)
    2. Set the Internet Sharing on the iMac, and share the 3G USB Modem network name to the Airport network and name the Airport network to be the same as No. 1
    3. That's it....
    Big Thanks to Duane for your help.
    Regards,
    Hindra

  • I got an IP camera for surveilance but I have an old version airport express. How can I plug the ethernet cord for the camera if there is only one port that's connected to the modem (WAN)?

    Modem has one ethernet port
    airport express the old one that looks like a charger has one ethernet port only, one usb, and one jack (speakers).
    IP camera needs of ethernet port to set up
    How can I do this?

    You will need to replace the AirPort Express with another wireless router that has a built-in Ethernet switch ... like the AirPort Extreme.

  • I was using an apple id, but now I wanna use a new apple id and keep all the data which i stored in the old one. Is that possible to do that?

    I was used one apple id for 2 phones.
    But now, I would like to use a new apple id but store back the old data from the old apple id.
    Is that possible to do that?

    No it is not. Purchases are forever tied to the Apple ID that they were purchased with.
    However, if you want to change your Apple ID, and it is not an @me.com, @mac.com, or @iCloud.com email address, you can log on to Manage your Apple ID with your current ID and password, then click on the EDIT button next to the Apple ID. You can change it to any valid email address that is not an Apple domain email address (the @me, @mac, @icloud mentioned above):
    Apple - My Apple ID
    Cheers,
    GB

  • I have an Ipad 3 - 32 gb, and I also have a player piano- Wurlitzer Essex which plays wirelessly from my Ipad thru Airport Express.  After doing an update to Ipad last yr, I have had a lot of difficulty in playing songs from the Ipad to my piano. Any idea

    I updated my Ipad 3  32 gb  about a yr ago.  Now I can't play songs from Airport Express to my player piano- Wurlitzer Essex.  Any suggestions?  I'm Leary about doing a new update because of what fear it did to my Ipad last time.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • New topic, old problem: Airport Express dropping out

    I'm aware of the many threads on Airport Express issues on here but since no solution has emerged I feel I must rake over it again in the hope that someone at Apple will pick up the ball and create a fix for AEX BDS or Bizarre Dropout Syndrome as I call it.
    Playing my iTunes music, via my 2T Time Machine>MacBook>AEX (extending my network to the basement) used to work seamlessly until...approximately... I upgraded to Leopard>Snow Leopard although if I'm honest I can't swear to this coincidence. Anyhow the symptoms are the similar as other ppl report elsewhere on this forum: ie Connecting prompts a microburst of a tune then randomly more bursts of varying length, never longer then 15secs, then after an hour or so it suddenly decides to play continuously for 4 or 5mins at a time but always dropping out again ad nauseam.
    I called Apple tech support who could only offer it was interference from neighbour's WiFi networks at work, I checked but my neighbours are all on different channels to me. I have tediously checked, rechecked, rebooted, reconfigured, reinstalled iTunes and OS, moved the unit even tried a brand new 11n AEX but to no avail, always the same problem (so at least I can rule out a hardware issue with the AEX unit itself). I'm hoping there is a fix out there.......otherwise the AEX units are just very expensive paperweights.

    I do not know if this answer will help much, but it is based on solid experience. 
    I tried using wi-fi and it kept dropping out.  I went through 3 routers!  A local salesperson told me enough with the new routers, it's your d*mn ISP. 
    Well, I started using speedtest.net to monitor my ISP's performance/signal strength.  I discovered that my signal FREQUENTLY dropped to very low levels.
    My theory is that whenever the signal dropped, which was very, very often, I lost wi-fi connectivity.
    I went to ethernet and never looked back, but with all these wireless devices, I'm wondering if I need to take a look at wifi again.  My ISP has cleaned up its act, so I might do better.
    Unfortunately, I haven't tried it yet, so I can't announce the results.  But I thought it might possibly relate to your situation.

  • What is the difference between AirPort Express and AirPort Extreme?

    Hi everybody!
    Here is my question: I'd like to get a portable (Mac of course) and I don't know which type of WiFi base I should buy, Express or Extreme? What is the difference between them?
    Thank you.
    Goldor

    Hello Goldor - sorry you've had to wait!
    The Airport Extreme Base Station and Airport Express are really quite different in what they are intended to do. Airport Express without a base station or modem/router already installed has limited function; it's really an add-on. So if you are starting from scratch you will first of all need a fully functional base station to connect you wirelessly to the internet. Once you have set up your network you can use an Airport Express to add functionality in several ways. The best plan is to visit the online AppleStore and read about the products there.
    However it should be pointed out that you don't HAVE to choose an Airport Express base station, it's only Apple's take on the technology and there are many more around (and a lot cheaper too!). Netgear, Linksys, Buffalo all make popular wireless products which will work happily with the Mac.

Maybe you are looking for

  • IN F-43 tax calculation tab is not coming

    hi In F-43 tax tab (Enter/display tax item) is coming but when i gone for calculating that no tab for calculate. so to get a calculate tab in f-43. Thanks Inadvance

  • Is it possible to call any Managed Bean method from af:goLink

    Hi, I am using RichGoLink component. Is it possible to call a managed bean method on click of the af:goLink? I want to provide some validations when user clicks on the goLink. There is no any actionListener provided. Thanks in advance.

  • Help on using Tomcat server

    hi there currently i am creating a web service running on Tomcat server. but it does not support the SOAP services. do i need a seperate package, if i need to send message using SOAP? if so, where can i get it.

  • Looking for the "Procurement Document" property in marketing documents

    It's a new check in the sales order, according to the DI API documentation it is PO Process and according to the current sceen it is is Procurement Document, both of them are not visible in the DI API, maybe there another property for it??

  • Re-calculate delivery date in Stock transfer order ( STO UB ), V_V2

    Hi, running the transaction v_v2 only Sto (Stock Transfer Order) At item level. Scenario:          Sales order in Plant 2.          Sto ,  Plant 1 to Plant 2.          Purchase Order To Vendor in Plant 1. When I run V_V2 in Plant 1, the First execute