Which is the best alignment for a Date-time data type (WPF)

Hello,
sorry If I'm asking this question in the wrong place (If you could help me where to ask it :) )
I have read the Microsoft guidelines for Layout. Left and right alignment are briefly described... but I don't see anything for Date/Time data type? What is the best alignment for this type of data?
Can you tell me where I can find the relevant information? Microsoft guidelines or other?
We are using WPF.
Thank you very much :)

Welcome to the discussion area!
+1) Will using the TC on a wireless network as a repeater half my connection speed while doubling my coverage?? In that case it might be worth it..+
Unfortunately, the Time Capsule will only "extend" a wireless network if the network has been created by another Apple "n" router. So the Netgear would not be compatible with the Time Capsule for this purpose.
If you could connect the Netgear and Time Capsule together using an ethernet cable, you would be able to create one large wireless network.
+2) Do I have any reason to believe I could get better coverage using the TC as the Base Station and trying to virtually impossible task of setting up the Netgear as a bridge?+
Not sure about "better coverage", but the Time Capsule would create dual band networks operating at both 5 GHz and 2.4 GHz so faster devices could connect at 5 GHz for maximum speed and slower devices would connect to the 2.4 GHz band.
In addition, if the Time Capsule connects directly to your cable modem, you could enable the "guest" network feature if you needed that function. (However, if the Time Capsule is configured in the network as a "bridge", the guest network feature cannot be enabled).
On a quick glance, your Netgear router does not appear to be a simultaneous dual band device. If that's the case, you could configure it to expand either the 2.4 GHz band or 5 GHz band (assuming it will handle 5 GHz) for wider wireless coverage. But, the connection between devices would need to be via ethernet cable, and as you point out, the Netgear would need to configured as a "bridge" in this type of setup.
If running the ethernet cable is simply not possible, take a look at a pair of ethernet powerline adapters to accomplish the same task using the AC wiring in your home to transmit the ethernet signal. While not as good as a straight ethernet cable, this type of connection would still yield better performance than wireless only, if the devices were compatible.

Similar Messages

Which is the best iOS for iPhone 3G? I am currently on 3.1.3 !

Which is the best iOS for iPhone 3G?
Should i update it to the latest 4.2.1 or let it be on my current firmware 3.1.3?
I have heard that 3G is best on 3.1.3?
Comment?

If I may, I agree that version 3.1.3 is the best for the iPhone 3G, however, I am currently travelling in Europe and I have a SIM card from a local mobile company. I discovered the hard way that there is an option missing: Settings > General > Network > Cellular Data (on/off). This option is not present in iOS 3.1.3. So basically, you disable 3G but it is impossible to block EDGE, and your phone will automatically revert to it if 3G is not available, and you will occur cellular data fees anyway.
I am sure of what I am saying because with the local service I use, I have unlimited data for $4 per day, but it is debited as soon as I consume one byte of data, then it is free until midnight the same day. Event if I have set Enable 3G = off, Data Roaming = off, for two days in a row, I was still charged the $4 a day because the Cellular Data was not off!
I compared with my wife's iPhone 3GS with iOS 5.1, there is the three options, Enable 3G (on/off), Data Roaming (on/off), Cellular Data (on/off). The option to turn it off simply doesn't exists on iOS 3.1.3!
With some research, I found that it is possible to block it anyway if you change your APN (Access Point Name) to an invalid setting. The easiest way to do this is to connect to the Internet using WiFi, then access this web site with Safari: http://unlockit.co.nz/ (from your iPhone).
This online tool allows you to change your APN, it is very useful when you travel abroad and you use local SIMs. On the first screen press Continue, on the second screen press Custom APN to create an APN for a local mobile company, or press Disable Data (FakeAPN) to disable 3G and Edge for good. When creating a Custom APN, you will be asked to choose a Country and a Provider, then press Create Profile. Then, either way, press Install and "Install Now" or "Replace", then press Done. This will add two things to your phone: first, an app-like icon for quick access to the website http://unlockit.co.nz/, second, a new menu in Settings > General, labelled "Profile", that contains your new APN. Note that it is possible to add several profile information, and some may conflict with each other. Remove those you don't need. Don't remove them if you are not sure!
I hope this works for you!

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Which is the best way for posting a large number of records?

I have around 12000 register to commit to dababase.
Which is the best way for doing it?
What depends on ?
Nowadays I can't commit such a large number of register..The dabatase seems hanged!!!
Thanks in advance

Xavi wrote:
Nowadays I can't commit such a large number of registerIt should be possible to insert tens of thousands of rows in a few seconds using an insert statement even with a complex query such as the all_objects view, and commit at the end.
SQL> create table t as select * from all_objects where 0 = 1;
Table created.
Elapsed: 00:00:00.03
SQL> insert into t select * from all_objects;
32151 rows created.
Elapsed: 00:00:09.01
SQL> commit;
Commit complete.
Elapsed: 00:00:00.00
I meant RECORDS instead of REGISTERS.Maybe that is where you are going wrong, records are for putting on turntables.

Which is the best way for a called function to identify caller class name.

Which is the best way for a called function to identify the caller class name .
1)Using sun.reflect.Reflection from called function
                Class caller = Reflection.getCallerClass(2);
                System.out.println("Caller Class Name ::"+caller.getName());2) Analyzing current threads stack trace from called function
                StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                System.out.println("Caller Class Name ::"+stElements[3].getClassName());Is there any alternate ways to achieve the same .Which is the best way ?
Called function doesn’t have any arguments, I don’t want t pass any arguments from caller function to called function.
Plz help.
With kind regards
Paul

798185 wrote:
Which is the best way for a called function to identify the caller class name .
Is there any alternate ways to achieve the same.SecurityManager
    // 0 is the anonymous SecurityManager class
    // 1 is this class (also works in static context)
    // 2 is calling class
    static Class getClass(int i) {
        return new SecurityManager() {
            protected Class[] getClassContext() {
                return super.getClassContext();
        }.getClassContext();

Anyone have any idea which is the best application for taking notes and essay writting?

im starting my first year of university and i was wondering what would the best application for taking notes on be? and also whats the easiest, most reliable and effective way to transfer documents off the ipad? Any thoughts on printing aswell?
will be appreciating all the help i can get!

You're going to get as many answers to that question as there are people to answer it. You don't state if you want to take handwritten notes or if you will be typing. For handwritten notes, I really like Noteshelf. It has lots of export options, my favorite being to Evernote (which you might want to look into as well for storage). For typing notes, I'd go with Pages, Documents to Go or QuickOffice. For working with PDFs, I like PDF Expert.
I've recently heard good things about Note Anytime. It is free for a limited time, so it'st probably worth downloading to try out.

Which is the best way for creating video placeholders in AE?

I should create some video placeholder for AE animation, but I am not sure which is the best approach to do that.
I found some tutorials on the web where is explained how to create basic placeholders in AE, but I want to do something better.
Could I create some placeholder even in Photoshop? And after that to import this psd files into AE.
I saw some intersting placeholders on Videohive but I don't know how to create something similar?
Any help?
Regards!

Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
     >template.aep
     >Footage
New project
     >copiedtemplate.aep
     >Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about.

Which is the best API for creating restful web services.

Hi guys,
I have tried a lot of apis to create a restful web service. But none of them has perfect documentation or examples. Which is the best one that has good support and future.

"Best" automatically implies opinions and speculation; one I personally believe has a bright future is Jersey. Jersey is the reference implementation (RI) for [JSR-311|http://jcp.org/en/jsr/detail?id=311] ("The Java API for RESTful Web Services" or JAX-RS).

I want to play AVCHD videos in ipad from my JVC camcorder.which is the best tool for converting the avchd videos to formats that ipad can play?

I have a JVC HD camcorder that creates videos in AVCHD format that ipad cannot play. Which is the best tool to convert these avchd videos to the format ipad can play?

Airplay is a wireless streaming protocol. It allows content to be pushed from the iPad through the Apple TV onto your connected HDTV.
If she wants to see the iPad displayed on the big screen and/or play games that involves mirroring. As long as it's an iPad 2 (or later) then you will be fine. More info on both has been referened below
http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/ht5209

Which is the best structure for start/stop data logging?

Hi everybody,
hope I can explain my problem good enough that anyone can help me:
I have a VI which continuely shows on a graph the voltage of a Analog Input of a DAQ device. Now I want to allow the user to start/stop with a click on a button data logging. Means that a second loop writes to a selected path every ms the data to a spreadsheet file.
At the moment my VI works like this:
You run the VI and Labview asks you one time for the file path, then you can start and stop the data logging. But you can do it only one time. If you want to log a certain time later another file, you have to close and open the whole VI again which is not very professional...
My target is:
It is onlyl necessary to start the VI one time. Then you can select a new file path, log data, select another file path, logging data again....and so on...
Which programm structure is necessary, can anyone help me as a labview beginner with that issue? I attached the VI if someone just wants to edit that...
Thank you for your help!! Markus
Attachments:
Logging voltage.vi ‏93 KB
screenshot.JPG ‏98 KB

@NaruF1 and GerdW
you are right, there is a mistake, both loop rates should be the same (10 ms) :-)
@NaruF1
yes you understood correctly that the file dialog should appear every time the user wants to start writing a new log-file. The voltage we measure is a analog signal, so there will be several interesting periods we want to save for a later analysis in Excel.
To your 2nd point: if it works with a array it will be fine. But it must be possible to log data for lets say 5 minutes, so the array won´t be too large? (5 min @ 10 ms loop rate will be 30000 rows..
attached is the VI, saved as LV2009..
Thanx a lot!
@GerdW
..you ask why I didn´t create a structure like you recommended with notifiers or queues? The simple answer would be that I am not familiar with all this.. just began to write my first Labview programm. I will have al look to the LV help with all that stuff... Thank you a lot
Attachments:
Logging voltage.vi ‏80 KB

What is the best process for conversion moving district data to city data?

Hi ALL,
I Need to write one conversion which will move the district field data into city field data in infotype 6..
It need to apply for only one Specific country which can be identified by Employee Personnel Area..and it should be apply for all active , Terminated employee as well...
What is the best process so that i can catpure all the data records of employees of the Specific country?
my approacH is..
LDB: PNP.
Start-of-selection.
RP_PROVIDE_FROM_LAST P0001 space pn-begda pn-endda.
check p0001-weks = '5200'.
rp_provide_from_last p0006 space pn-begda pn-endda.
Loop at p0006.
move p0006 to T_p0006.
if ort01 is not initial
Move P0006-ORT01 TO T_P0006-ORT02.
endif.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty         = '0006'
          subtype       = P0006-subty
   objectid      = P_record-objps
          number        = p0006-pernr     "employeenumber
          validityend   = validityend
          validitybegin = validitybegin
         record        = T_p0006.
          recordnumber = p_record-SEQNR
          operation     = 'MOD'
          nocommit      = nocommit
          dialog_mode   = '0'
        IMPORTING
          return        = return_struct
          key           = personaldatakey
        EXCEPTIONS
          OTHERS        = 0.
      Endloop.
Is this using Loop is fine? or Using PROVIDE * from p0006 between PN-BEGDA AND PN-ENDDA
ENDPROVIDE is fine?
Is my code is accurate...Bapi_employee enque bapiemployee_deque i will add apart from that is this code is fine for my requirement or any additional need to take care to capture all the employee data ?
Regards
sas

Hi,
Please use the following code: -
RP_PROVIDE_FROM_LAST P0001 space pn-begda pn-endda.
check p0001-weks = '5200'.
rp_provide_from_last p0006 space pn-begda pn-endda.
provide * from p0006 between PN-BEGDA AND PN-ENDDA
move p0006 to T_p0006.
if ort01 is not initial
Move P0006-ORT01 TO P0006-ORT02.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '0006'
subtype = P0006-subty
objectid = P_record-objps
number = p0006-pernr "employeenumber
validityend = p0006-endda
validitybegin = p0006-begda
record = p0006.
recordnumber = p0006-SEQNR
operation = 'MOD'
nocommit = nocommit
dialog_mode = '0'
tclass = 'A'
IMPORTING
return = return_struct
key = personaldatakey
EXCEPTIONS
OTHERS = 0.
endprovide.
Hope this will help you.
Thanks & Regards,
Gaurav

Which is the best mouse for photo editing in Photoshop CS5?

Hi everyone! Im planning to buy a mouse and can't decide which one would be the best. I have been using Photoshop CS5. Im really into photgraphy, its a new passion of mine. I use a Macbook Pro but I think its time to get a mouse. I know a lot of people think that the tablet is the answer and Im looking into that but I really want to try a mouse first. Thanks for the answers!

Welcome to the Apple Support Communities
I recommend the 15-inch MacBook Pro if you can afford it. That's because Photoshop runs better on a dedicated graphic card, which only the 15-inch MacBook Pro includes, but it should run without any problem on a 13-inch MacBook Pro too

Which is the best way for iOS to communicate with the webserver SOAP or JSON

Which one is the best for iOS to interact with the webserver.. to exchange messages like
1. Normal NSString
2. images
3. audio
4. videos
like any other stream of bits..
Thank you

There is a reason why JSON took over AJAX world. I have been too busy to research this myself, but you may be interested in WebSockets.

Which is the best MacBook for me to buy if I want to use it for digital video editing as well as Photoshop?

All the Apple MacBooks have been upgraded. I am looking for either a MacBook Pro or a MacBook that I can use to edit digital videos and do some Photoshop work. Which one would you advise me to go for? I am considering the 13”.

Welcome to the Apple Support Communities
I recommend the 15-inch MacBook Pro if you can afford it. That's because Photoshop runs better on a dedicated graphic card, which only the 15-inch MacBook Pro includes, but it should run without any problem on a 13-inch MacBook Pro too

Which is the best monitor for macbook pro 2012 with retina?

I would like to connect a larger monitor to my retina macbook pro late 2012. It will be only for office use but I would like the best ppi. Thanks

I would like to connect a larger monitor to my retina macbook pro late 2012. It will be only for office use but I would like the best ppi. Thanks

Which is the best alignment for a Date-time data type (WPF)

Similar Messages

Maybe you are looking for