Which is the BEST/most practical RAM to buy?
Bought my PB last Nov of 2004 without any upgrades here in Japan. Since, I am getting tired of the COLOR WHEEL thing everytime I am just running few simple application - I am really thinking of upgrading my RAM to its fullest. However, since I am in Japan - I do not know where to go and get one aside from Apple which is really a rip off:
Any help with the ff will be appreciated:
1. Best/cheapest RAM Brand and where to buy
2. Any tips on buying and installing
3. Japan sites which sell RAM ( as ordering from US would cost a lot)
At present, I am only using my PB for usual applications; Not really into programming. But the WHEELS are really getting tiring.
I do not have apple care. Does anyone know if I can still avail one?
Any info will be a great help,
Cheers
There is very little difference between external USB card readers except in their ability to read very high-capacity cards. If you buy one that says it can read SDXC cards, you should have no trouble with any lower-capacity card. Many readers are generic, and are sold under various brand names.
There are SD readers that fit into your computer's Expresscard 34 slot, but they are much more expensive than USB readers.
Similar Messages
-
All the Apple MacBooks have been upgraded. I am looking for either a MacBook Pro or a MacBook that I can use to edit digital videos and do some Photoshop work. Which one would you advise me to go for? I am considering the 13”.
Welcome to the Apple Support Communities
I recommend the 15-inch MacBook Pro if you can afford it. That's because Photoshop runs better on a dedicated graphic card, which only the 15-inch MacBook Pro includes, but it should run without any problem on a 13-inch MacBook Pro too -
Which is the best graphics card i can buy that is compatible with Mega PC 651?
I have had my Mega PC for 2 and half years, I had a MSI FX 5600, but unfortunately blew it 18 months ago by flashing the BIOS, I would now like to buy a new card but am unsure as to which one's are compatible with my motherboard, could anyone please help me with this, the graphics card will be used for gaming...SiS M650 i think this is my motherboard...
Quote
I was advised to upgrade graphics card. Will the 6600GT work for me too? Or are there any new cards in the market? I'm mainly using my pc to watch football over the internet or watching some you-tube clips which become hazy/blurred when expanded to full screen view.
Sorry, but in your case, a new graphics card won't make a blind bit of difference here. The clips become hazy/blurred (or blocky) because they are low resolution video files, which will naturally look awful when blown up to your full-screen resolution. -
Just bought imac 5.1 2gb ram need os which is the best to run?
Here are the specs for your machine:
http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.16-20-inch-sp ecs.html
I'd suggest purchasing a retail Snow leopard disk at the Apple store; it is a very stable system and will run well on 2 GB RAM.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
Which is the best antivirus and spyware for Mac?
Good morning,
Because of schoolwork and extracurricular activities, I am constantly sending and receiving e-mails and messages to and from PCs and other Apple devices, like IPads. Two years ago I purchased a 120,12GB MacBook Air and, until a few months ago, it went perfectly well.
I am not sure what happened, but lately, every time I go online, whatever I click -whether it is a random letter in a website, or a blank space in a page, anything- an advert appears or a new -unwanted- tab opens with publicity and such, the kind of additional tabs that open when you are watching movies online in a random website, but this time, it is happening with every website (even the Apple site) and almost constantly. I suspect it is something I downloaded or maybe something I received from an infected PC that I got a virus or problem from.
I tried using the MacKeeper software, but it is not working for me (?). Also I tried blocking pop-ups (I use Google Chrome), Java Script, automatic downloads, complements and everything I could when going online, but it has not gotten better over the last 9 months. My parents also recommended me a very good technician, who I personally know and has solved many of my previous problems, but he could not help me, in this situation.
For that reason, I have been considering either purchasing a good antivirus for my Mac or a new Mac and an antivirus for it, to prevent future problems like this one.
Either way, the question is the same,
Which is the best antivirus and spyware software for Mac?
Thank you so much for your attention.Please get rid of MacKeeper, as it and most other such junk software will do more harm than good.
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
Hi, every body
I just want to purchase a new nokia hs. but little confused.
I am in India and belong the same. N73 looks nice and N95 also( little costly also). but stil even in other than N series hell of confusion.
Can anybody help me. pl. guide me which is the best and which hs I should go for. Though I am using Nokia 6681 a very good hs very appreciating but I want to give it to my bro.
DeepI say N95-2..but still we are here just to give you advice.
The changes compared to the regular N95 are:
* 8 GB internal flash memory, up from 128 MB.
* Larger display (2.8", up from 2.6"), same pixel count (320x240), lower resolution (142dpi vs 153dpi).
* MicroSD slot removed
* Demand paging (although the N95 supports this too, since firmware version 20.0.015[17])
* 128 MB RAM, up from 64 MB
* 1200 mAh battery, up from 950 mAh
* Slider protecting camera lens removed to make room for the larger battery
* Landscape mode for N-Gage (Next Gen) games
* Cosmetic changes to media and front-panel buttons
* New model of handsfree/remote control, AD-54[18] (as opposed to AD-43[19] for previous N95 versions)
* New multimedia menu, with Nokia's Ovi content integration
* Removal of built-in video editor
* Mass: 128g, up from 120g -
Traffic shaping: Which is the best solution?
Hi! I'm running 3 computers on 1 d-link router, 2 of them has an archlinux installed. Wondershaper mostly works for me when the other computers has cfosspeed running on windows, but when both computers run archlinux and wshaper and p2p applications, ping is over 1000ms instead of 10-20ms.
Which is the best solution of traffic shaping on linux, and is there a howto for them (can be even a gentoo wiki page or similar)?
Edit: shorewall is not being built from yaourt (x86_64), can't find a usable manual for trickle and niceshaper, (even ubuntu forums has unreplied "threads" about it) and can't start them coz missing config files, it seems, noone cares about ACK priority and ping in the Linux world
Last edited by Vegita (2010-02-24 19:58:07)This config file is being used on 2 computers, and not working, my speed is 8m/1m. Any ideas? I don't want to limit anything, I just want ACK's priority to set to the highest, and same with http, and get p2p apps (opn this computer ktorrent and valknut, on the other ktorrent) priority on lowest. valknut's port is 1412, ktorrents' one is 6881 on this and 24748 on the other computer. Any ideas what to modify for small ping?
# shaping config script for pyshaper
# for more information about pyshaper configuration, refer to the
# file 'pyshaper.conf.readme', and the examples therein
# set the connection-scanning period to 15 seconds (which is very
# aggressive). IF you're more concerned about longer-running
# connections, set this to a longer value (say, 60-300 seconds).
period 30
# declare one network interface, and set its inbound
# and outbound bandwidth in kbits/sec
eth0.ip 192.168.0.180
eth0.in 8096
eth0.out 1024
# This is a test scenario - we're throttling all replies
# from our webserver to max 16kbits/sec, but only if
# the remote client is shell.sourceforge.net
# note - the identifiers 'out', 'pri', 'rate', 'ceil' 'http' and 'test'
# have special meaning (see pyshaper.conf.readme).
# the identifier 'http' is not significant - you can replace
# it with anything, as long as your setup is consistent
# we're setting up a basic 'class' called 'http'
eth0.http.pri 1
eth0.http.out.rate 968
eth0.http.out.ceil 1024
eth0.http.test raddr=='66.35.250.208' and lport == 80
eth0.p2p.test (cmd == '/usr/bin/valknut')
eth0.p2p.test (cmd == '/usr/bin/ktorrent')
eth0.p2p.pri 3
# default traffic gets good bandwidth
eth0.default.out.rate 932
eth0.default.out.ceil 968 -
Which is the best free Java Obfuscator?
Hello,
I am planning to deploy my application using Java Webstart and to protect my code from reverse engineering wondered - which is the best free Java Obfuscator?
thanks,
AnilHerko,
Thanks for your insight. With your explanation, I have more respect for your approach. I am a (struggling) one-man startup trying to get this thing off the ground. Yes, my idea can be learned by seeing it in action. That is why, advisors have told me to yank the demo from the web site (http://juwo.com)
I would hate to see someone else steal what I have done with a lot of trouble and even worse, use my own source code to do so. In short, I dont want to be a fool.
thanks,
Anil
I know the Proguard product, as well as several other
obfuscation tools. I know obfuscated stacktraces can
be reversed (as long as you go through the extra
trouble of maintaining the obfuscation mappings for
each version of the software you release). That was
not my point.
I work for (and am part owner of) a small software
development company. We have invested 9 years into
writing enterprise-quality software that is provided
to customers all over the world. We used to think we
needed to obfuscate our software too. However, we
have found that the source code is by far the
least important aspect of what we do as far as
most of the outside world is concerned. Which
is why we have been developing a major part of our
software as Open Source since 1999. Which is why we
have switched completely to an Open Source strategy
earlier this year. That's right: all of our code is
(or soon will be) freely available to anyone,
anywhere.
We have learned over the years that the most
important aspect of our work is not the code, but the
idea behind it. Obviously, this idea can not be
obfuscated without defeating the entire purpose of
the software. This means others are able to learn
about the idea just by seeing the software in action.
That alone enables them to implement that same idea.
The fact that they might use our source code to do it
is largely irrelevant.
Going one step further, the most important aspect of
our work is actually the way we - the people who
made the software - use that idea solve the real
problems of our customers. It is that knowledge our
customers ultimately pay for, not the code.
With very, very few exceptions the basic idea of your
code will not be unique on a global market like the
Internet: sooner or later (and from our experience,
it's always sooner) someone will have the same idea.
Their implementation of that idea might be better
than yours, or it might be worse. What ultimately
matters, though, is wether or not you are able to
convince customers that the idea itself is sound.
Customers buy solutions, not code. -
Which is the best SharePoint 2013 Training Institute in Mumbai?
Hell there,
Can anyone please help me to find out which is the best SharePoint 2013 Training Institute in Mumbai?
Thanks,
PritamHey Pritam,
The best way to study is integrated from multiple sources:
Microsoft Press Books.
Virtual Microsoft Lab
Virtual Video learning as "TrainSignal" or "CBT"
Experience, install and while trying and error you will learn the best way.
Most likely you can find colleges that teach this topic in your area, it is important for you to know that everyone is taught based on Microsoft distributes data in ways I recommended you go through the course first hand that there is no chance you'll miss
important information.
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
| -
Which are the best settings for exporting comps before edditing in Premiere Pro
Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects". -
I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
Merry ChristmasRepartition and format the drive for a Mac:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
Which is the best software to convert dvd to IPad 2d
Which is the best software to convert dvd to IPad 2d
unfortunately discussing the breaking of the encryption that comes with commercial dvd's is prohibited in these forums. however a quick google search will get you to quite a few software providers....
on a personal note, i don't agree with the fact that we can't "legally" transfer dvd's because breaking the encryption is considered illegal, even though the "fair use act" has said that copying dvd's for personal use or for backup purposed is considered legal. it's just the software to do that isn't. i'm not one who would rip a dvd then make multiple copies to make a financial gain. i just want to be able to convert my "old" media into a format that meets my current needs.
good luck my friend on your search. i really wish i could help you more -
which is the best app to create cartoon images on that I can move around to other apps and animate. I want to create the image only, no background or anything
Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini -
Which Is The Best Free Video Converter Software?
Which is the best FREE software for encrypting dvd's for Ipod and which is the best FREE software for converting encrypted dvd videos to my Ipod, or is there out a FREE software that can do both thing?
Windows XP ProTry this software:
Firefox or IE7.
Go to these forums.
Search these forums.
This question is asked 1000 times a month. So try a search , honest it works. (Google has a few thousand answers as well).
Note DVD's are already encrypted, so you will be looking to decrypt them, then convert to MP4 for iPod.. -
Which is the Best way to upload BP for 3+ million records??
Hello Gurus,
we have 3+million records of data to be uploaded in to CRM coming from Informatica. which is the best way to upload the data in to CRM, which takes less time consumption and easy. Please help me.
Thanks,
Naresh.do with bapi BAPI_BUPA_FS_CREATE_FROM_DATA2
Maybe you are looking for
-
In Business One Customer Portal
Hi Experts, I have S-user ID and Password. How can i change Name, Mail ID, Phone No in Customer Portal? Plz guide me. Thanks and Regards, Manikandan Edited by: Mani S kandan on Jun 30, 2009 5:42 PM
-
Not able to get ESS iviews for 80 and 80C
Dear All, We have implemented ESS MSS BP (ERP 2005 EHP3) and have standard iviews working on the portal. But when i preview the iview for section 80 and 80 C, i get the following error. " com.sapportals.portal.prt.runtime.PortalRuntimeException: Fail
-
Data is overwritting in database
Dear friends I am saving data in database table through screen.but problem is that it should allow duplicate entry without overwriting, wa_ordtyp-txt = T003p-AUART. WA_ORDTYP-AUART = T003P-AUART. WA_ORDTYP-ZRD_FIELD = ZRD_FIELD. W
-
Hello: I try to connect IDM 6.0 SP1 wiht Sun Directory Server 5 (LDAP) using LDAP adapter. If i use non-secure port (389) it is OK and the connection work fine. But if i try to use ssl port (636) i obtain error. Directory Server is configure to work
-
HT4623 i still cant update my ipod
So im wayyyy behind on my updates but i can seem to find the update button or anything on my ipod or itunes store helo please