Which is the best way to pull cr's to dispute under 30 day period, not the 45?

Been rebuilding for some time, but new to forum. I'd like to pull all 3 cr's and be able to correct/dispute but under the 30 day turnaround period. Don't want to give them any extra ammunition. I've read here in forum about credit check total. Is that accurate on reports and scores? Worth it?...or call them up individually and pay for it? I've done so much, I can't recall if I've used my free annual ones, but not interested in that if it gives them 45 days. I don't think I've used the free ones yet. Get dizzy trying to remember. Ideas/Methods appreciated. Thanks

Viewer68 wrote:
Ok, Just finished ordering all 3 individual reports. CSR's are pretty sneaky trying to get me to take the free one. Guess I was entitled to it. I had to repeatedly correct them and tell them to charge me. (Normally not telling or insisting a company to charge....felt weird). Transunion came back on the call and sneakily said it was processed and there was no charge. I went back and forth and they insisted by law...they could not charge me. After further discussion, they simply said they could not account for the way the other two bureaus responded or handled it, but that the 30 day dispute time-frame applies even to their free report. They insisted. What else could I do at that point. So now I have all 3 reports coming my way. We'll see how things look, now that I'm getting more personally active in this process....once again.The time they have to process a dispute has no relation at all to whether you got a free report or a purchased report. It has to do with how the dispute is submitted. Disputes submitted by mail have 30 days plus 5 business days for mailing the results. Disputes phoned in have 30 days. Disputes submitted electronically (don't ask me why, I have no clue) have an extra 15 days.

Similar Messages

Best way to pull spark view nav out of mobilecomponents.swc?

I would like to use the new view navigator code introduced in Flex 4.5, however it is important that our mobile apps share the same code base (mostly) as our web and desktop apps. Since these components were only included in the mobile build, what would be the best way to go about merging in these dependancies to our main library, without pulling over the full mobilecomponents.swc (which causes errors when included in a non-mobile app). I believe the errors are being caused by incompatible base class defenitions, but please correct me if my assumption is incorrect.
Does anyone have any suggestions for the best way to pull out the view navigator code without requiring the entire mobile framework, or should I just abandon the concept for now?
Thanks for your time!

Hi, thanks for the reply!
Here is the error I'm getting:
ArgumentError: Undefined state 'landscape'.
at mx.core::UIComponent/getState()[E:\dev\hero_private\frameworks\projects\framework\src\mx\ core\UIComponent.as:10596]
The error seems to be related to the theme, but I'm not quite sure what the best way to fix it would be. Is there an underlying flaw in my project set up, or do I need to set some kind of mobile theme in my Flex air project?
The main project includes a number of internal library projects, and each one has mobilecomponents.swc set to merged in code. I also need to be able to build the workspace as part of an automated build, so it's important I understand what the underlying issue is with the project configuration within FB.
I am using Flash Builder 4.5 Premium.
Any aditional insite you can give me will be greatly appriciated.
Thanks again!

What's the best way to pull off this guitar trick?

I have a funky wah-wah guitar riff (about 5 seconds in length)and would like to have part of the riff play on the left speaker and the second half play on the right speaker—kind of flow between the two speakers organically. The riff was originally recorded in mono.
What would be the best way to accomplish this effect? Automation and pan the signal in real time? Or double the recording on two different tracks and the cut it up and pan so one half plays on the each speaker for half of the time? Any other ideas or tricks?
Basically, I’m just trying to get it to sound as “natural” as possible, if this makes any sense. I’m just curious how you guys would pull this off. Thanks for any tips.

hi
personally i'd do what you suggest: automate the pan of the gtr region/track.
i'd either use one of my midi controller knobs - assign it to pan and then do it in realtime... or just draw in the pan automation and play around with the nodes of the automation and smooth them out with the curve tool...
you could also use something like the stereo spread plugin and the tremolo and automate the later (depends on the rate of panning you want and the effect)
or use a pan plugin....i think destroyfx had one - but i can't find it now - something like autopan....which you can sync to the bpm.
hope that helps
rounik

Best way to pull an MBP from a toploading computer case

Please help solve a philosophical dispute we have over here.
What's the best/safest way to pull a MBP out of a toploading computer case? One hand or two hands? Put it in so you will pull from the latch side or from the hinge side?

Thanks for all your input, it's always helpful to have sources to quote when know-it-all's try to out-know-it-all you... Just a couple of items for the record (and for our Canadian newbie to confirm our looney-tune'ness):
We've all come across a number of reports in the forums about warped lids, which raises the suspicion of pressure on the edge as a cause. Especially in big 17" lids.
Way back, I had a black 5200 PB. After awhile of pulling it out by grabbing from the hinge side, the LCD started failing, with all sorts of psychedelic patterns. Turned out Apple used a flat ribbon cable to connect the LCD to the motherboard and it did a 90 degree turn, folded over itself, near the hinge. My repeated pinching on that side eventually caused the cable to fracture. Nowadays, you could argue that pinching the latch side could cause the built-in iSight to fail.
Anyways, I just received a RadTech Sleevz for the MBP, which will afford better grip when pulling it out of the case, so problem solved.

Cloud and virtual machine API - Which one is best way

Hi
We are having cloud services in our environment. In that we have web role and vm role. We want to collec the cloud, virtual machine and web role related information both config details and performance related information.
1) For this we are using Service management REST API and
API indicated in the below link
http://azure.microsoft.com/en-in/develop/java/
https://msdn.microsoft.com/library/azure/ee460799
http://dl.windowsazure.com/javadoc/
1) I want to collect the cloud, virtual machine and web role configuration
details and performance details (like screen shot 1 and 2)
2) I want to collect the Diagnostic information enabled by virtual machine and cloud services like
WADPerformanceCounterTable etc
Which one is the best way (from the above link) to collect all these informations. Please suggest me..
Thanks & Regards,
Rathidevi

Hi ,
We want the same for java. So we referred the link below and attached screenshots.
http://azure.microsoft.com/en-in/develop/java/
In the below screenshot gives (Service Management/API/REST and Table Services/API/REST).
In that which one is best API or REST.
We want the configuration, Performance and dignostic details of cloud , virtual machine and web role related information.

When I send a webpage via email, some of my recipients are unable to see it properly. The website was made with iWeb, and a Mac person advised me this was the best way to do an email campaign with iWeb, but it's not working for a lot of my customers - why

I have recently created a website for my family's business. When we bought the Macbook the guy in Apple said the best way to send an email campaign to our mailing list was to publish a hidden page, find it in the browser on Safari, then share it via email, so that is what I do. For most of my customers this works fine, however I have a number of people each month who cannot see any of the content of the email. I have added an 'If you can't see this email properly...' link at the top of the page, with no shapes or images etc near it, but even that does not appear for them.
I am a self-taught novice unfortunately, so haven't a clue what the problem is. I'm not sure of the operating system, but we bought the Macbook in May and it has all the recent updates installed. I have just had a new baby so can't get into the store fdor a one-to-one, so if anyone could explain why this happens / what I can do about it, I would be very grateful! Thanks!

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Which is theb best way to read a file of 5-10 mb

Hi,
I need to read a flatfile of 5-10 mb and simultaneously insert into database .
Reading through FileInputStream or FileReader?
Which is the best approach to do this keeping in considerataion performance and memory management.
Please help .Its is an urgent task to be done.
Thanks,
kazim
Message was edited by:
kazimh

I always use the following example.. mayb that would help you as well
File fid = new File(fileName);
if (fid.exists())
        fr = new FileReader(fid);
        br = new BufferedReader(fr);
         while((txtstr= br.readLine()) != null)
}

Best way to print an image multiple times on same sheet and not lose quality when doing so

Hello,
I have the full subscription to Adobe Creative Suite, but am unfamiliar with almost all of the programs. I have used Photoshop a bit, but not too much.
I have this project I do several times a year, and am sure there is a better way to do it.
I am sent a colourful excel spreadsheet - a schedule. I print a bunch of copies full size, then need to print 8 copies on a single 8.5x11 piece of paper.
I've tried several methods - but want to know what the best way to retain the best quality would be.
The best I've done (and I'm not totally happy with) is to copy the image into Photoshop, save as a PDF, create 7 more copies then merge as a single PDF and print.
I do find that the quality does suffer a bit.
Can anyone suggest a better way?
Thanks in advance.
Amber

With all the apps at your disposal, that is a long way around. Granted it is hard to not loose quality/data when scaling. But it makes sense to create the document to your liking, then create a new document that is 8.5" x 11" and place the original into it. Then using guides or alignment tools, duplicate that image.
This allows you to have full control over the location of each image, and extra data needed like captions, names, etc. and how that data is formated.
Luckily you have multiple programs that can accomplish this. Some are easier than others, some are more robust than others, etc. In the end it is what you are familar with and how much time you can spend on learning while getting the job done.
Photoshop, Illustrator, Indesign are all your go to programs from creating anything for print and they can be used for other media as well. But that is their strong suite, print.
All three apps have their own dedicated forum on this site, so go ahead and mark them as your favorites as your questions for each need to be in their respective place.
http://forums.adobe.com/community/photoshop
http://forums.adobe.com/community/illustrator
http://forums.adobe.com/community/indesign

What is the best way to disable tags in SVE when a OPC server is not available?

I have a LV2009 DSC app with SVE that reads tags (1100 spread acrross them) from 4 PLC's through NI OPC server. From time to time the PLC will lose power because that test machine will be powered down. The NI OPC loses the OPC link then to that particular machine/PLC and this error is transferred through to the SVE.
Is there an any/efficient way to stop the reading of tags if/when this happens? The only way I can think of is to undeploy/re-deploy from the app when it is necessary.
In the same way is it possible to prevent the SVE acting on this error?
I also have a longstanding problem with updates of tag values to the frontend of the LV VI. The update rate into SVE seems OK, but the tag values are slow to update onto the page. I have reduced the amount of tags on the pages as well as reducing the amount of code on a page. It becomes better, but I would like to have an update of less than 2 seconds at least to properly display plant status. I'm running a heartbeat timer from a PLC and in some cases this takes up to 15 seconds to update.
Any assistance will be appreciated.
Pierre

PierreN,
In order to set the timeout value of a Shared Variable, you may Right-Click, and select 'Show Timeout':
Implementing Timeouts through your application variables will allow you to gage which variables are, and are not updating. This troubleshooting stepp will allow you to better characterize the source of the slowed update rate. You also may take a closer look at the OPC Server configuration, and the deadnband settings you have implemented on the I/O Clients.
Snowforest has offered good advice in terms of implementing a State-Machine architecture to handle the 'Power Down' system status. Also, if you know the specific error that is propagated, you may choose to implement implicit error handling using the data contained in the Error Cluster.
Cheers,
Pcorcs
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Best way from FCP using Compressor (too long render - 3 days?)

Hi
What's best quality, most efficient way to get our 85 min documentary out of FCP 6 to an SD DVD master?
Using 2008 model Mac Pro 3.0, 8GB RAM, I'm going from FCP to Compressor, via QT movie (current settings Pro Res) of Timeline, bring it into Compressor = NTSC, 16x9, 2 pass VBR best, 6.5 to 7.6 bit rate, GOP = IBBP closed, size 15, Frame Controls ON, resize filter = BEST, De-interlace = fast, Rate Conversion = Good...
I did a 2 minute test and it took an hour! And that was for a web-friendly 480 x 270 size. What's it going to be at 720 x 405 (the 16 x 9 version) - 3 days? What to do? Should I print the timeline to tape and bring it to a post house and they can do better or what? I know if I turn frame controls to OFF it'll speed up significantly, but then the FONTS/Text especially when over Black BG look horrible after compressed to 720 x 405.
Suggestions?
K

This ain't going to help much, sorry. Give us a few more hours, maybe a day or two, one or more of the DVDSP wonks will stop by and offer better advice.
What's best quality, most efficient way to get our 85 min documentary out of FCP 6 to an SD DVD master? < </div>
The DVD will be MPEG2. Working in anything higher quality than that has questionable benefits, the ratio of increased processing time to improved results is completely one-sided, a waste of time.
Compression is a disappointing series of compromises unless you totally understand the process. You can spend a few hours researching articles by Jan Ozer to help you decide what your workflow should be. Me, I would export a self-contained movie out of FCP to a codec that would hold a reasonable amount of spatial rez before going to Compressor.
Exporting self-contained creates a new media file that requires no further handling or rendering which is probably holding you up now. Every frame is being recreated before it can be compressed.But I never use Compressor to create the MPEG2, I let DVDSP do that for me. This shortcut produces every bit of quality I need for my projects.
Your situation, apparently, is different. And there is no real shortcut for you except to research it and try to find a recipe that suits your expectations. But whatever you do, MPEG2 is going to be a real bummer, especailly if you are shrinking or scaling your large format image to letterbox or anamorphic.
bogiesan

What's the best way to transfer footage from a Sony miniDVD camcorder?

What's the best way to transfer footage from a Sony miniDVD camcorder?

Do not use "mini" DVD's in any slot loading DVD drive.
Buy a cheap "tray loading" external DVD drive and attach it to your Mac.

What is the best way to allow one to send an email? Confused.

Hi,
I researched on the forum for the ability to have someone click a button and be able to have a blank email pop up. I use to use this all the time.
However my question is since Outlook Express (and for that matter now Windows mail) are no longer included in the new operatings systems ... meaning everyone has to buy a mail program ... what is the best way to have someone send an email? I am particularly not fond of forms and would rather have them be able to have an email pop up.
However now you will miss a lot of people ... I use Windows mail thus the Outlook express code gives me an error.
THUS MY QUESTION:
Is there general code (and if so what is it?) that allows a person to click a button and send an email no matter what type email program they have?
If not is there an other way to accomplish this?
If not, if I must use a form/action script 2.0 ... does anyone have a sure-fire 2.0 script that is easy to use/debug/modify?
THANKS.

I don't understand what you mean by "be able to have blank email pop up" but Yes you can send an email without the need of any email programs through ActionScript via PHP through the POST method. There is a simple example in http://www.kirupa.com/developer/actionscript/flash_php_email.htm

What is the best way to backup Address Book to external HD?

Hello there
I would like to backup my Address Book on an external HD. How do I go about doing and what's the best way to doing it?
I have a vague idea but not sure if it's the correct folder to drag to the external HD. I went to ~/Library/Application Support/Address Book. My question is this: Is that Address Book folder the correct one to drag to the external HD? Am I missing other important folders to drag along to the external HD in order for both the Address Book folders to be the same in my internal and external HD?
Thanks in advance!!

It would copy the information into a single file... The same as if you wanted to share your contacts with someone else-you could email the vCard to them, they would import it and have the all the same contact information imported into their address book.
For your own use, it's pretty much the same and works through the File>Import>vCards option in AddressBook.

TS1324 What is the best way to sync my Outlook 2010 to my iPhone and iPad

What is the best way to sync my Outlook 2010 to my iPhone and iPad.

Note, I'm on the latest iOS - not 6.1.1 as the original post suggests.

Best way for mouse enable application?

Hello All,
I would like to create a form and mouse should be enabled. (Mouse navigation limit = form). I am using forms 10g and database 10g.
I would like to know which should be best way to keep the triggers code for required and not required items.
Regards
SUN

Thanks Jan,
In my application I have a form with three blocks. 1st and 2nd block is not data base block. 3rd block is database block. My forms "defered required" property is No and "mouse navigation limit" property is form.
My 1st block 1st item required property is Yes. Also I have when-validate-item trigger in the 1st item and when-validate-record in the 1st block. After running the form I am in the 1st tiem. I did not enter any value into the item and click in the 2nd block 1st item by mouse. At that time when-validate-item and when-validate-record triggers are not firing. Also it is not asking for enter the value for this item.
So for this type of problem how to over? I can put in the form level validation for all the items. But I would like to do in the record level validation and item level validation. Is it possibel if yes could you please give me how to do it?
Regards
SUN

Which is the best way to pull cr's to dispute under 30 day period, not the 45?

Similar Messages

Maybe you are looking for