Which is the comparable program to the old Photoshop 6.0

I still want to be able to manipulate and adjust
the images but I'm not sure which program I should
buy: CS4, Lightroom, Elements.

With Elements are you able to liquefy
and manipulate the image?
Can you merge other images together like in
6.0?

Similar Messages

  • How does the email program in the suite compare with Google GMail especially in handling spam or are both about the same?

    How does the email program in the suite compare with Google GMail especially in handling spam or are both about the same?

    Firefox doesn't include an email client. Are you asking about the Seamonkey suite? The Seamonkey support options are over here: http://www.seamonkey-project.org/community

  • Why in September when I purchased a through the Edge program with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended), is no longer valid?!  2 months after getting the Edge device, I go to make a c

    Where is the insurance and original Edge Agreement from September?  No one in Verizon knows. I purchased (rented) a Galaxy S4 through the Edge program, with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended),which is no longer valid!  2 months after getting the Edge device, I go to make a claim and Asurion will not honor it because I am not covered; however, all the order confirmation receipts emailed and physically sent with the device show the addition of insurance when I signed up for the Edge program.  According to Verizon (via live chat with 'Nicole'), this $5 protection plan no longer exists and the order numbers I have on my paperwork (multiple documents) are invalid in the Verizon system.  For over a week, I have spent more than 10 hours on the phone, live chat and in the store trying to get some sort of resolution and the customer service reps just put me on hold or promise to "call me back within 30 minutes after they speak to a supervisor" and (surprise!) they never return my call.  Or they send me to the store to show proof of my documents, but then those associates cannot help either.  Also, the 'Edge Agreement' in my profile has the wrong device (and serial #), wrong payment amounts and no mention of the 'consumer protection plan'  on it, which is listed on the order confirmation sent via email and with the actual Edge device on September 23.  Obviously, there was some sort of glitch or mistake on Verizon's part, but NO ONE WILL EVEN TRY TO ACCEPT THAT FACT!  WHY WON'T ANYONE GET BACK TO ME WITH SOME SORT OF EXPLANATION FOR ANY OF THIS?!  Is it typical for Verizon to do away with a service (i.e., $5.00/month protection) and not inform the customer of this?  And is it company policy to be as unhelpful as possible to a paying customer who needs assistance when there is cleary something wrong on your end?  And finally, am I really suppose to believe that Verizon customer service has no email addresses or fax machines so a customer can send you proof of what is on the receipt you sent and that I have to take more of my time to go to the actual store?!  Finally, does anyone at Verizon even read these messages or even give a F@#k about the customer as long as they keep making money?! 

    RLites22,
    I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • How can I change the default program for the external applications editor?

    I have read the on line directions for this and it reads "select a file type in the left pane."   I do not see where this is in the left pane.  All I see in the left pane is "Browser start pages" and a "How do I " Pane.  Nothing with file types.

    Hello,
    Welcome to Adobe Forums.
    In order to change the default program for the external applications editor. Please follow the steps as mentioned below.
    Click on Edit menu then choose preferences.
    Once the preferences dialog box open.
    click on file editors.
    On the Left pane you will find all the file types which you want to edit .
    On the right hand side you will find the editors for that specific file type.
    If you want to add any other application you need to click on + symbol at the top of right pane.
    Select the path of that application which you want to apply.
    clcik on open.
    If you want to make it primay you can click make primary option available at the right hand top. For more detials please check the screenshot below.
    Regards,
    Rajeev

  • Bought the Aperture program. The interface in Japanese. Thanks, very conveniently. Can will prompt how to be switched to English?

    Bought the Aperture program. The interface in Japanese. Thanks, very conveniently. Can will prompt how to be switched to English?

    Delete the Aperture app you currently have installed using this free utility >  Download AppCleaner for Mac
    Then re download Aperture using the same Apple ID you used for the original purchase. You will not be charged again. Before doing so, click the round flag icon bottom right corner of the App Store window. Make sure you see the U.S. flag. If not, click the flag icon so you can swtich to U.S.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.

  • How can I get Firefox 3.6 to startup and load at a particular screen position - using cmd-line or other, in a Solaris SPARC/UNIX env? The xterm program uses the -geometry args as a manner of specifying position on the screen.

    I am running Firefox 3.6 - on Solaris 10 SPARC env.
    I am using the X11 - TWM(X-windows Manager). I have tried to alter the .twmrc files for the WM, but I need firefox to declare the position in the client program, else the TWM will force me to place it every time. When I use the xterm with the "-geometry" I can specify the position the xterm is opened and positioned there automatically. I have tried using the Xresource configuration settings(maybe I am doing something wrong here), but the X-server ignores it... so I believe that only firefox app can manage the positioning?
    I am out of ideas, I suppose the next step is to question the source... Any ideas of how I can achieve this auto positioning in TWM. (I have been looking into X-events to manage the placement, but this is messy)

    The version of Apache that comes default with Solaris might not be compiled for that I am not positive though. I downloaded and compiled Apach 2 and compiled mod_ssl and got it working with no problems you might want to try that.

  • How to include the ordinary program in the BOR object type program

    Hi Guys, while i am trying to include a program in the BOR object type program. It is showing the following error:
    "Statement 'INCLUDE Z_ERC_SEARCH_VALOFACT_MACRO .' is not permitted in BOR".
    then, i tried to add  "<" and ">" to enclose it, but it wants the access key to create it.   anyone knows how to add the ordinary program in the BOR object type program.

    It's correct that we CAN'T insert our INCLUDES in BOR program. We CAN only use TYPE-POOLS there. So you can create Type Group with TYPES, CONSTANTS and DEFINE statements, and then use them in BOR programs.
    Using DEFINE you can construct MACROs with parameters and call your code there. It's limited, and not the easiest way, but some things can be achieved this way. Also forget about using Code Patterns while editing Type Group.
    Note: Use TYPE-POOLS statement after INCLUDE statement in BOR program .
    Best regards,
    Tomas.

  • I didn't receive any news about the replacement program for the Ipod 1st generation. I have already sent the serial number online, but didn't have any progress. What should I do? Thank you

    I didn't receive any news about the replacement program for the Ipod 1st generation. I have already sent the serial number online, but didn't have any progress. What should I do? Thank you

    After you set up your service use your repair ID to track your replacement here:
    https://selfsolve.apple.com/repairstatus/main.do
    Remember: You will receive a replacement unit approximately 6 weeks after Apple gets your current iPod nano
    Hope this helps.
    -Julian

  • Change the print program from the Transaction F150

    Hi all.
    Does somebody can help how to change the print program in the transaction F150?.
    I have copied the F150_dunn_01 (form) and the SAPLF150 (printprogram)
    This transaction calls the form F150_dunn_01 I want to know how to assign to this transaction my print program ZSAPLF150
    Thanks and regards.

    Hi Srinivas Adavi.
    Ok, I have taken this path...
    IMG-->Financial Accounting
         -->Accounts Receivable and Accounts Payable
           -->Business Transactions
             -->Dunning
               -->Printout
    In this, appears:
    Define Dunning Forms (with SAPScript)
    Define Dunning Forms (with SAP Smart Forms)
    Assign Dunning Forms
    Define Sender Details for Dunning Forms
    Develop Enhancements for the Dunning Print Program
    Attached Payment Media
       -->And So On.
    What are then next steps to make the configutation; sorry I'm newbe jeje

  • Is it possible to change the address in the replacement program for the ipod nano 1G?

    I 'm already sign up in the replacement program of the ipod nano 6G and the emply box has already been send. But later, I noticed that the address wasn't complet. So my question is if and how I could change my address.

    There currently isn't any contact information or support from Apple in regards to this specific replacement scheme. I know it's quite frustrating, but Apple have not offered the best customer care in this situation. My only other piece of advice would be to go to an Apple store if possible. Speak to somebody and explain your situation..they may be kind enough to call through for you.
    I am positive that there is not any means to contact Apple via an online form or by email.

  • Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the even

    Why doesn't apple have a file of events that ties to the iCal program and the Address book file? By having that relationship it seems that you could call up all of the events tied to a customer while in the address book or likewise call up all of the events tied to a contact that was in the iCal program as a scheduled meeting. Even in the to do's you could easily look back at the events tied to an individual so as to bring yourself up to speed with what you were doing with the individual in mind.

        I definitely understand your concern and I apologize for all the frustration. Verizon Wireless has a strong customer commitment to delivering the best from our service and staff. I am disappointed to hear the service you received did not reflect this commitment.
    I definitely want to help get to the bottom of this and further assist you. Please reply to my direct message so I can access your account and further assist. I am sure we can get this resolved.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • System doesn't recognize the software programs on the Photoshop elements disk?

    How do I get my Windows XP system to recognize the software programs on the Photoshop Elements disk? This is not a download from the web.  I've got the minimum requirements. Turned off all security systems. Created a separate account for Photoshop. And tried other disks to make sure the drive is working. After hours of troubleshooting I'm ready to return the software.

    If the drive is correctly installed on to the sled, and the mounting screws are snug, not tight, and the sled is inserted properly so that all the roof-tangs catch as the sled is inserted, failure to show up in Disk Utility means the drive is not useable.
    A Bug in 10.8.4 and later precludes Disk Utility ERASE-ing large drives in Internal bays. Use PARTITION only, and create one new partition, GUID partition Map, Mac OS Extended (journaled) Volume.

  • Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

    Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

    Hi Barbara,
    Try Pacifist...
    http://www.charlessoft.com/
    then extract/install what you need from your Install Disc.

  • Does the recycling program subtract the 10% off after the original price is add with tax?

    Does the recycling program subtract the 10% off after the original price is added with tax?

    I do not know, Call an Apple store and ask.

  • Does the replacement of the recall program of the iPod nano 1st gen come in a box?

    I heard about the recall program of the 1st generation. So I went to the nearest iStore and applied for the said program 3 weeks ago.  I got a text yestrday that I can already get the replacement unit. But when I got the replacement (iPod nano 6th Generation), it was just placed in a plastic. Thought it came with a box?

    No, it does not come in a box.

Maybe you are looking for

  • How do I get rid of empty space left at the end of my project?

    My first posting here - I'm glad to find this community! I've been working on a project . . . editing it down from its original length, but the empty space still exists at the end of my timeline. I want to remove it, since I'm posting the project onl

  • Office 2016 for Mac Preview

    Hello, As I didn't found any forum for the Mac Preview version of office I'm posting this here. I hope to find someone who will help. When using one of the Microsoft Office 2016 application for the Mac (Preview), I'm randomly prompt to authentificati

  • IPhoto '09 won't launch

    I had a serious problem with my security certificates. So I backed up my files using Time Machine and dragging and copying some others to an external HD, copied down my IDs and passwords. Then I performed a clean install of Snow Leopard. Previously,

  • Replace " with ' in a string

    I need to replace " with '. Does any have a solution? The follwing code has a problem to define sString replace ="""; public String replace(String str, String pattern, String replace) { int s = 0; int e = 0; StringBuffer result = new StringBuffer();

  • Sound not working for USB Headset [Solved]

    I've looked everywhere I can to find a solution for this as I'd hate to waste anyone's time.  I've done everythign the wiki has said and even tried some stuff on other webpages (like including a "!" in front of pcspkr in the Modules part of /etc/rc.c