Which is the correct way to reload data in a partition?

I have a partitioned table and there's a particular partition which i need to remove the data and reload it again since we found out that parts of that partition had invalid data. Which is the best (valid) way to remove the old contents of the partition:
1) to truncate the partition and then drop the tablespace it points into, and building again the tablespace and partition?
or
2) to simply delete the partition and rebuild it ?
thanks

A general rule of thumb that I use it to think in layers...
--GUI {What you show the use}
--GUI code logic {local rules and edits}
--WEB/Network {interface for multiuser}
--BUSINESS RULES {rules and coding to make your business work}
--DATABASE {where do you store your durable data}
Granted, this is a very simplistic look, but it will get you a start a thinking process for your app.

Similar Messages

Which is the correct way to filter/block traffic between vlans?

Hi all. My question is: Which is the correct way to filter/block traffic between vlans?
i have a more than 15 vlans. I want to block traffic between them except 2 vlans.
source vlan 3 deny destination vlan 4
#access-list 100 deny ip 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255
and the oposite:
#access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.3.0 0.0.0.255
I have to do this for all VLANs, ono by one. Is that right?
Thanks.

There are a couple of ways to achieve that. I assume that you have a Layer3-Switch. There I would configure one ACL per vlan-interface and allow/deny the traffic as you want. Sadly, the Switches don't support object-groups yet, so you have to use the IP-networks here. Only allow/deny traffic based on networks or hosts. Don't even try to be very granular with permit/denys based on ports. Because the switch-ACLs are not statefull you'll run into problems for the return-traffic if you woulf do that. And the return-traffic of course has to be allowed also.
Another way: with the help of 802.1x you can deploy port-based ACLs for every user. That takes some time for planning, but is one of the most powerful solutions.
For more control you could remove the L3-interface from your L3-switch and move that to your router or firewall. These devices support stateful filtering and you can control your traffic much tighter tehn with ACLs on the switch.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Which is the correct way to program a Desktop Application???

Hello all,
I haven't programmed in a while and I just got the free Netbeans 6.1 CD just for kicks and to try it out. I'm making a basic application for a store that one of my family members has. I was programming away as I could and right now I came to a conclusion... I think I maybe doing this wrong.
I have done all the GUI using the Netbeans IDE plugin visual designer and I just click on the button and add the event and then I program away. But just right now I noticed another file that is called NameOfProgramApp.java. Then I look to the right and I have NameOfProgramView.java where I have been placing most of my code. Is this the right place to put the code???
I think I maybe missing something or maybe doing some lousy code writing. Any help would be awsome. Is this where I put my Object Oriented think hat on to accomplish the correct way??
Thanks in advance and it feels good to be back :D

A general rule of thumb that I use it to think in layers...
--GUI {What you show the use}
--GUI code logic {local rules and edits}
--WEB/Network {interface for multiuser}
--BUSINESS RULES {rules and coding to make your business work}
--DATABASE {where do you store your durable data}
Granted, this is a very simplistic look, but it will get you a start a thinking process for your app.

What is the correct way to transfer data from old hard drive to new Crucial SSD on a mid 2010 13" MBP

I just bought an Crucial M550 256GB for my mid 2010 MBP. And I'm not clear on the data transfer instructions.
1) it came with Acronis instalation kit with a blank CD and a usb cable. I'm not sure what this CD is used for?
2) is it best to install the SSD with a fresh OSX download and then just use time machine to load all my previous settings?
3) or do I partition the SSD before I install it in the MBP and transfer using a clone?
Not sure what to do here...

Well, I am not familiar with the Crucial kit you got - you might want to ask them about that blank CD...... however, I did install an SSD and this is what I did:
I ordered a kit from OWC which included an external USB hard drive enclosure and tools. When it arrived, I first installed it in the external enclosre, hooked it to my MBP and then used CarbonCopyCloner to make a full bootable clone of my system on the new SSD after formatting it to Mac OS Extended (Journaled) and the GUID partition scheme. I then uninstalled the internal, installed the SSD in its place (following the install video availabe at OWC) and booted up - that was it. I installed the old internal drive into the external enclosure for an instantaneous bootable cbackup.

Which is the best way to get data from user difine tables with condition

Hi everyone,
I would like using SBO DIAPI to get UDT data rows, there is a method of UserTable.getbykey can get one row information, but I like to get a list of rows from UDT, and the get list have its condition such as: field1="Type_A" ect.
also I want to avoid using doquery get data from DB, because there is direct access DB potential Suspect.
I am using SBO 2005 PL09 & visual studio(VB.net) 2005 and I only using DIAPI do not using UIAPI.
Thanks for any advice.
Kathy

Hi Kathy,
Unfortunately SBObob.GetObjectKeyBySingleValue only works for the B1 business objects as listed in the documentation.
So, when you don't know the keys (= Code) of the records you want to get from your UDT - there's no way around using Recordset object's DoQuery method!
Sorry,
Frank

HT1338 Hi I would like to know which is the correct way to upgrade my imac.

My operating system is Mac OS X 10.4.11 with processor GHz Intel Core 2 Duo Memory 1 GB SDRAM 667 MHzDDR2
Thanks for the help

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

Which of of these two choices is the correct way to call a report ?

Environment is 9iAS.
Which of of these two choices is the correct way to call a report from the menu?
Choice 1) CGNV$INVOKE_REPORT('W02226.adinfra.net:8888,reports9i', 'rv043knd.rdf', CACHE, '', 'HTML',NULL );
Coice 2) qms$menu.set_current_action('LAUNCH_REPORT','rv043knd.rdf'); execute_trigger('QMS$MENU_ITEM');

although the menu-preference MNUDRC has the value qms$menu.set_current_action('LAUNCH_REPORT','<MODULE>'); execute_trigger('QMS$MENU_ITEM');
the generated code for calling the report in the menu is like the code under option 1).
What else do we need to set (in the preferences or elsewhere) to use the Headstart Report Launch Form ???
thanks! Bart

What is the correct way to set up a new Mac

A friend of mine recently migrated from Windows and bought himself an iMac. He got the local Apple store to set up his iMac and migrate his data from his Windows to his iMac. I was recently helping him set up a few a additional things on his iMac and was supprised to see how the Apple store had set up the machine.
There was only one account set up on the iMac and all of the user data had been loaded into this admin account. Now I've only been a Mac user for about 5 years, but I was always taught create an admin account with no data on it and then set up a separate user account(s) which contain all the user data and these are used by the users to log in.
Now my question is who is right the Apple shop or me? I would e intertested to hear any experts views on the correct way to set up an OSX machine.

Both of you. Either way is acceptable. However, for a single user machine there's really no need to have more than the admin account.

Ok, does anyone know the correct way to do this

Hi all
would someone beable to explain the correct way of attaching dynamic text to a rotaing menu so that the text moves with the image as it rotates,
I am now being told that in order to have dynamic text rotate/move I have to embed the font, by placing a text field on the stage outside my flash area and then set embedFonts property to true, and then apply a textformat.
first, is this the correct way of doing it?
second, can someone please explain(by breaking down into steps, as I am a newbie) how I go about setting embedFonts property to true and applying a textformat.
what I have created;
1.)I created a movieclip called 'textHolder' inside this has two dynamic text fields called 'headerText' & 'bodyText' <<<<< IS THIS CORRECT?
2.)I have an xml file which will load the text in as well as the images with the rotating menu, see below; <<<IS THIS CORRECT????
<?xml version="1.0" encoding="utf-8"?>
<data>
<image name="image 1" path="img/img1.jpg"
    textHolder.headerText="Sunset"
    textHolder.bodyText="The hour of night is near, as the skies get blood-filled" />
<data>
3.What I am missing is what script I need for the main.as file, can anyone help here?
so to break down.
I have a rotating menu that is driven by xml, that loads images on the menu. I would also like to load text to the left of each image, and have the text be fixed with the image as it rotates.
I can post the as, but I would like to know if the above is correct first, if you would like to see the main script please say.
I have attached a jpg layout to give you an idea as to what I am trying to explain. can someone please help!!!!!!!!!
(this is my previous post: http://forums.adobe.com/thread/463213?tstart=0 but I feel its got lost a little along the way)

MY CURRENT SCRIPT, CAN YOU SEE HOW TO ATTACH THE TEXT WITH THE IMAGE?
package
import flash.display.DisplayObject;
import flash.display.MovieClip;
import flash.display.Loader;
import flash.display.Sprite;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.net.URLLoaderDataFormat;
import soulwire.ui.CircleMenu;
public class Main extends Sprite
//————————————————————————————————————————————— CLASS MEMBERS VALUE
public var circleMenu:      CircleMenu;
public var xmlLoader:      URLLoader;
//——————————————————————————————————————————————— CONSTRUCTOR
public function Main()
circleMenu = new CircleMenu( 300, 32, 14 );
circleMenu.x = 150;
circleMenu.y = 300;
addChildAt( circleMenu, 0 );
// Use URLLoader to load XML
xmlLoader = new URLLoader();
xmlLoader.dataFormat = URLLoaderDataFormat.TEXT;
// Listen for the complete event
xmlLoader.addEventListener(Event.COMPLETE, onXMLComplete);
xmlLoader.load(new URLRequest("data.xml"));
/*for (var i:int = 0; i < 20; i++)
    // MyMenuItem can be a symbol from your library
    // or any class which extends DisplayObject!
    var item:MyMenuItem = new MyMenuItem();
    item.txt.text = 'Menu Item ' + (i + 1);
    item.txt.mouseEnabled = false;
    item.buttonMode = true;
    item.addEventListener( MouseEvent.CLICK, onMenuItemClick );
    circleMenu.addChild( item );
circleMenu.currentIndex = 4;*/
// Enable the mouse wheel
stage.addEventListener( MouseEvent.MOUSE_WHEEL, onMouseWheel );
// Set up the UI
ui.spacingSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.radiusSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.minAlphaSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.minScaleSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.scaleSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.itemsSlider.addEventListener( Event.CHANGE, onSliderChange );
ui.spacingSlider.dispatchEvent( new Event( Event.CHANGE) );
ui.radiusSlider.dispatchEvent( new Event( Event.CHANGE) );
ui.minAlphaSlider.dispatchEvent( new Event( Event.CHANGE) );
ui.minScaleSlider.dispatchEvent( new Event( Event.CHANGE) );
ui.scaleSlider.dispatchEvent( new Event( Event.CHANGE) );
ui.itemsSlider.dispatchEvent( new Event( Event.CHANGE) );
//———————————————————————————————————————————— EVENT HANDLERS
private function onXMLComplete(event:Event):void
// Create an XML Object from loaded data
var data:XML = new XML(xmlLoader.data);
// Now we can parse it
var images:XMLList = data.image;
for(var i:int = 0; i < images.length(); i++)
    // Get info from XML node
    var imageName:String = images[i].@name;
    var imagePath:String = images[i].@path;
// var textInfo:TextInfo = new TextInfo();
//      textInfo.headerText.text = images[i].@headerText; <<<<THIS IS WHAT i HAVE TRIED, GET ERRORS SO COMMENTED OUT
//    textInfo.bodyText.text = images[i].@bodyText;
//    addChild(textinfo);
              //textInfo.x=120;
    //textInfo.y=300;
    var sp:Sprite=new Sprite();    <<<<<<<< THIS IS SCRIPT JUST ADDED
    var tf:TextField=new TextField();
    tf.wordWrap=true;
    tf.width=200;
    var ldr:Loader=new Loader();
    addChild(sp);
    sp.addChild(tf);
    sp.addChild(ldr);
    ldr.x=tf.width+10;
    // Load images using standard Loader
    var loader:Loader = new Loader();
    // Listen for complete so we can center the image
    loader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImageComplete);
    loader.load(new URLRequest(imagePath));
    // Create a container for the loader (image)
    var holder:Sprite = new Sprite();
    holder.addChild(loader);
    // Same proceedure as before
    holder.buttonMode = true;
    holder.addEventListener( MouseEvent.CLICK, onMenuItemClick );
    // Add it to the menu
    circleMenu.addChild(holder);
private function onImageComplete(event:Event):void
var img:Loader = event.currentTarget.loader;
img.content["smoothing"] = true;
img.x = -(img.width/2);
img.y = -(img.height/2);
private function onMouseWheel( event:MouseEvent ):void
event.delta < 0 ? circleMenu.next() : circleMenu.prev();
private function onMenuItemClick( event:MouseEvent ):void
circleMenu.scrollToItem( event.currentTarget as DisplayObject );
private function onSliderChange( event:Event ):void
switch( event.currentTarget )
    case ui.spacingSlider:
    circleMenu.angleSpacing = event.currentTarget.value;
    break;
    case ui.radiusSlider:
    circleMenu.innerRadius = event.currentTarget.value;
    break;
    case ui.minAlphaSlider:
    circleMenu.minVisibleAlpha = event.currentTarget.value;
    break;
    case ui.minScaleSlider:
    circleMenu.minVisibleScale = event.currentTarget.value;
    break;
    case ui.scaleSlider:
    circleMenu.activeItemScale = event.currentTarget.value;
    break;
    case ui.itemsSlider:
    circleMenu.visibleItems = event.currentTarget.value;
    break;

I have a macbook air late 2010 and keep getting a warning that my hard drive is full and to delete things so I purchased a external hard drive (1TB) but I'm just not sure what the correct way to transfer and store files to the external drive is. First MAC

I purchased a macbook air about 5 months ago and lately i keep recieving a warning that the hard drive or disk is full and that I will need to move items to trash in order to free up space on it. I purchased a external hard drive 1 TB but I'm very new to mac and ios and unsure as to how I'm suppose to transfer my files (video, pics, music etc.) from my mac over to the external hard drive in the correct way so I won't end up deleting them permenately or screwing anything up with my mac as far as the applications and programs being able to run. Am I supposed to just copy to the external hard drive and then move to and empty the trash? That's pretty much all I could come up with, but then what if i need or want to access that file again at a later time. Also, I have an i Phone and i pad so with i cloud it automatically syncs all my purcheses and if i delete something from itunes on my mac it deletes from my ipad.
I'd appreciate any kind of input i think im just a little lost here. I have to say i love my Mac and wouldn't trade it for anything (except maybe a macbook pro w/more memory)... Is there something I'm missing???

To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

Which is the Best way to upload BP for 3+ million records??

Hello Gurus,
we have 3+million records of data to be uploaded in to CRM coming from Informatica. which is the best way to upload the data in to CRM, which takes less time consumption and easy. Please help me.
Thanks,
Naresh.

do with bapi BAPI_BUPA_FS_CREATE_FROM_DATA2

1.4.2 - What is the correct way to format output in the java.io.PrintStream

With Java 1.4.2:
What is the correct way to format output in the java.io.PrintStream?
The following is incorrect, even though it is still used in the The JavaTM Tutorial at: http://java.sun.com/docs/books/tutorial/essential/
System.out.formatThis returns "cannot resolve the method 'format'"
Any detailed suggestions or information is greatly appreciated.

The following is incorrect, even though it is still
used in the The JavaTM Tutorial at:
http://java.sun.com/docs/books/tutorial/essential/
The whole format thing has been introduced in 1.5. The tutorial also states it's been "updated to 1.5.".
That's all I've got to say for I don't know how you can format a PrintWriter, let alone a PrintStream, prior to 1.5. I'm not really sure there is any way. Any "legacy way", that is. There almost certainly are third-party API which achieve similar results.

OBIEE 11G Calculation the Correct Way

Hi All,
My requirement is like this that I want to calculate value Gross Profit which is simple Total Revenue - Total Expense. Now I want this to act as a Hierarchy i.e Gross Profit should be drill able to Total Revenue followed by Total Expenses. For this I created a Accounts Dimension table since no Drill Down facility is available on Fact Table(Therefore I had to move my Accounts to Dimension table rather than Fact Table). Now the problem is that there is no minus based aggregation present in OBIEE BMM layer because of which my all other sum based aggregation work correctly except where there is a negative based aggregation required like in the case of Gross Profit. Kindly Suggest what is the correct way to approach this problem. I am working on OBIEE 11g in this case.
Warm Regards
Abhishek Kapoor

Financial reporting is difficult in BI because of the user preference of how to see signs on different accounts and requirements for adding/subtracting depending on the type of account.
A few ways to approach:
a. Use case statement to make total rev and total expense columns. Subtract to build a gross profit column. You can do this in the presentation services front end or the BMM.
b. If you have opposite natural signs for rev and exp, you can create an account hierarchy in the account table which will net out to gross profit. Ex:
Column 1 – account number
Column 2 – hierarchy level 1, ex Gross Profit
Column 3 – hierarchy level 2, ex Rev or exp
Column 4 – account name
Etc…
c. Remember you can always build your own drilldown using navigation links to a report instead of the built-in drilldown.
Good luck!

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizon

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"

Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

Which is the correct way to reload data in a partition?

Similar Messages

Maybe you are looking for