Which is the current product for small businesses?

Hi,
I'm trying to determine which middleware product is Oracle's current offering for small businesses. Is it still Standard Edition One or is it some subset of the SOA suite? I see that Standard Edition One is listed as a "previous release" on the downloads page, and that its version number is behind the current AS release.
Thanks.

The latest release of Standard Edition One meant as a Portal solution for SMB customers is 10.1.2.0.1.
Thanks
Pavna

Similar Messages

I have snow leopard. My iTunes is 10.6.3, which is the current software for OS 10.6.8. The new iPhone 5 requires iTunes 7! Does this REALLY mean I'll be forced into purchasing either Mountain Lion?

I have not ugraded, but I can on 1 of my apples, to Mountain Lion. Much of the software I use is not compatible, or the compatible version is unacceptable (Quicken, etc.).
iTunes is 10.6.3, and it says it is the CURRENT software for my system.
The new iPhone 5 requires iTunes 7.
I may be dense, but is there no way around this problem other than upgrading to Mountain Lion? Maybe it is a strategy to sell more computers? In any case I may simply bypass the new iPhone. That isn't what would be the ideal scene, but it's an option.
Any thoughts on Apple coming up with a solution and having the iPhone 5 at least partially compatible with iTunes 10.6.3? Like they did with iCloud?
Thanks,

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

Which is the best iOS for iPhone 3G? I am currently on 3.1.3 !

Which is the best iOS for iPhone 3G?
Should i update it to the latest 4.2.1 or let it be on my current firmware 3.1.3?
I have heard that 3G is best on 3.1.3?
Comment?

If I may, I agree that version 3.1.3 is the best for the iPhone 3G, however, I am currently travelling in Europe and I have a SIM card from a local mobile company. I discovered the hard way that there is an option missing: Settings > General > Network > Cellular Data (on/off). This option is not present in iOS 3.1.3. So basically, you disable 3G but it is impossible to block EDGE, and your phone will automatically revert to it if 3G is not available, and you will occur cellular data fees anyway.
I am sure of what I am saying because with the local service I use, I have unlimited data for $4 per day, but it is debited as soon as I consume one byte of data, then it is free until midnight the same day. Event if I have set Enable 3G = off, Data Roaming = off, for two days in a row, I was still charged the $4 a day because the Cellular Data was not off!
I compared with my wife's iPhone 3GS with iOS 5.1, there is the three options, Enable 3G (on/off), Data Roaming (on/off), Cellular Data (on/off). The option to turn it off simply doesn't exists on iOS 3.1.3!
With some research, I found that it is possible to block it anyway if you change your APN (Access Point Name) to an invalid setting. The easiest way to do this is to connect to the Internet using WiFi, then access this web site with Safari: http://unlockit.co.nz/ (from your iPhone).
This online tool allows you to change your APN, it is very useful when you travel abroad and you use local SIMs. On the first screen press Continue, on the second screen press Custom APN to create an APN for a local mobile company, or press Disable Data (FakeAPN) to disable 3G and Edge for good. When creating a Custom APN, you will be asked to choose a Country and a Provider, then press Create Profile. Then, either way, press Install and "Install Now" or "Replace", then press Done. This will add two things to your phone: first, an app-like icon for quick access to the website http://unlockit.co.nz/, second, a new menu in Settings > General, labelled "Profile", that contains your new APN. Note that it is possible to add several profile information, and some may conflict with each other. Remove those you don't need. Don't remove them if you are not sure!
I hope this works for you!

Which is the software needed for an installation on a production server

Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards

For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

Quark have released a sensible pricing structure for small businesses. When will Adobe?!

Hi Guys
My company are still reluctant to purchase the Adobe Digital Publishing Suite.
Even the Professional Edition is still expensive for small businesses.
I really enjoy using Adobe products. We moved from Quark to Adobe years ago when they brought out the Creative Suite.
Quark have introduced the App Studio which is a free update to Quark XPress 9 (see link below).
Why are Adobe not doing the same?!
http://www.marketwatch.com/story/quark-simplifies-ipad-publishing-with-app-studio-and-quar kxpress-91-2011-09-01

You can watch the keynotes here: http://max.adobe.com/online/
Bob

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Q10 not sending gmail for small businesses

Hi,
I have a Q10 with both a normal gmail account and one for small businesses (using my own domain name). The domain name address however has stopped sending emails. It still recieves them but sent emails are not recieved by the reciepitants. Please could you help - I have checked the settings and they are all as they should be.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the current firmware for iphone 3g?

What is the current firmware for iphone 3g?

Dear Genes.... wjosten / Templeton Peck,
My iPhone 3G is on iOS 4.0.(8A293) and with Firmware 05.13.04. Since few days when I shifted to New operator VODAFONE, I am troubling with "NO SERVICE" most of the time, but when I checked my SIM in another Mobile, it is working fine. So please tell me which iOS do i need to switch to and what will be my Firmware. As I own iPhone 3G, moving to iOS 4.2.1 is very slow.
Please do suggest. Itz a lil Urgent.
Looking Ahead to hear from you.
Thanks in Advance....

I have taken a 12 month membership for cc and photoshop. I now see that adobe are offering the same product for only $9.99 per month including lightroom, whereas I am paying $19.99 a month. Is it possible to change plans without any penility payments.

I have a monthly membership to Photoshop CS6 costing $19.99 per month on a 12 month membership. I now see that Adobe are offering the same product for only $9.99 per month. Is it possible to change plans with any extra costs to me. Thankyou

Hi rjmo
Yes, you can switch to the Creative Cloud Photography Plan without penalty.
Please check this doc for the differences between this plan and the Photoshop single app plan you have currently: Photoshop Help | Differences between Photoshop and Creative Cloud Photography Programs
Let me know if you wish to proceed with the switch and I can arrange it.
Thanks
Bev

Error :The current budget for budget type CBUD is negative

Hi All, I am using the BAPI BAPI_0050_CREATE, which is using giving me the message
The current budget for budget type CBUD is negative (budget address)
I want to know how is this message being occured, so that i can do the same check in one of my program.
I deugged the BAPI and its using the method CL_FMKU_ENTRYDOC_HANDLER->DOC_CHECK_POST, but could not trace the CHECK done for the above error.
Please let me know the validation
Regards
Gopi

Hi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
     internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899   AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction   group 10 back to its original definition.
Regards Bernhard

Which is the best way for a called function to identify caller class name.

Which is the best way for a called function to identify the caller class name .
1)Using sun.reflect.Reflection from called function
                Class caller = Reflection.getCallerClass(2);
                System.out.println("Caller Class Name ::"+caller.getName());2) Analyzing current threads stack trace from called function
                StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                System.out.println("Caller Class Name ::"+stElements[3].getClassName());Is there any alternate ways to achieve the same .Which is the best way ?
Called function doesn’t have any arguments, I don’t want t pass any arguments from caller function to called function.
Plz help.
With kind regards
Paul

798185 wrote:
Which is the best way for a called function to identify the caller class name .
Is there any alternate ways to achieve the same.SecurityManager
    // 0 is the anonymous SecurityManager class
    // 1 is this class (also works in static context)
    // 2 is calling class
    static Class getClass(int i) {
        return new SecurityManager() {
            protected Class[] getClassContext() {
                return super.getClassContext();
        }.getClassContext();

What is the best product for keeping a mac pro running fast?

What is the best product for keeping my mac pro running at optimal speed?

Enough RAM. More than just so there are no pageouts.
A fast small SSD for boot system drive that is only OS and apps and 50% free
Backup clones of your system and data plus TimeMachine
Avoid security suites from 3rd parties and other would be helpers (unless instructed to for a specific need and purpose).
Replace and update older components. could be graphic card, no longer suffices wtih Lion, or causes heat and dust. And make sure that the fans cool the system properly. May need to boost the low default fan speed profile and that is one utility that can be a must. Also monitor system temp readings.
Don't jusst idly restart after a crash or freeze, use Lion Recovery Mode and Safe Boot instead.
Make backup clone before making updates and changes to your system.

What is the current status for Kerberos Constrained delegation feature on the ASA platform?

What is the current status for Kerberos Constrained delegation feature on the ASA platform?

Hi Oscar,
This is not available yet in the current software. Now, we cannot give any official information on this forum about software that has not been released yet, but if you really want to know I would suggest that you contact your local Cisco sales office to confirm with your account team which new features will be in the upcoming ASA 8.4 software release.
hth
Herbert

I downloaded Safari 5.1 onto Mac OS 10.6.8 some time ago. Yesterday the back/forward arrows next to the url window changed to a , which adds the current url as a bookmark. I want the arrows back. What happened, and how can I fix this? Thanks. kammro

I downloaded Safari 5.1 onto Mac OS 10.6.8 some time ago. Yesterday the back/forward arrows next to the url window changed to a +, which adds the current url as a bookmark. I want the arrows back. What happened, and how can I fix this? Thanks. kammro

There's another way.
Right or control click the + then click Remove Item.
Just remembered that keyboard shortcut!
You're welcome

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

if you're trying to convert pdf files to word files, you want acrobat pro or acrobat standard, Buying guide | Adobe Acrobat XI Standard
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Which is the current product for small businesses?

Similar Messages

Maybe you are looking for