Which is the right badi on save for cv01n

Can someone tell me which is the right badi on save?
I have a requirement of inserting 2 input fields pernr(personal number) and ename(employee name)  for a particular document type in cv01n... if i save a document all  the values are saving except pernr and ename... so which is the right badi where i can put the logic to pass the values.. I appended DRAW table with the above 2 input fields.. i am not sure about the table where the document details are saving upon SAVE  is triggered.
In DRAW table document number getting generated is saved with all the other values except PERNR AND ENAME.

Hi,
Please download "ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio". When you install it, it will create an 11g Oracle home. Let it do that (don't try to install it into the Oracle XE home).
You will need to set up a connect alias to connect to the XE database (as if it were on another machine).
Thanks,
Christian

Similar Messages

  • Which is the right way?/place to post the suggestion to SAP

    Hi Freinds,
    if someone have to make a suggestion to SAP, for its product extension..or maybe a new feature to add to its existing product offering...which is the right place...shld it be in the form of a blog or a post in a forum...
    and if indeed turns out to be a unique feasible feature and gets lots of positive response...why kind of recognition will it get....

    lol. there's a world outside the US for those who don't know.
    therefore ASUG might not be the right address for someone living elswhere. there are some SAP user groups in other areas of this world, eg in germany it's DSAG; unfortunately you have to be a member of those 'societies' (membership fee) and it's not easy to make yourself heard in the beginning.
    SAP could provide better channels for that, e.g. special SDN areas for that purpose.
    rgds,
    anton

  • Which is the right hardware address?

    If I look at Prefs->Built-in Ethernet -> Ethernet, the panel quotes an 'ethernet ID'. System Profiler -> Network gives a MAC address. Both of these look like plausible hardware addresses(6 pairs of letters and digits with colons between), but they're different. Does anyone know which is the right one to quote to register on a (BootP) network? And, just out of interest (unless there's something weird about my Macbook) what the other one refers to?
    I need to get this registered to our university network but (surprise surprise) the IT people don't support Apples so they're no use.....
    Thanks

    Ethernet is the category name for both the Airport and "Built-in Ethernet" devices under which the MAC addresses are listed. If you click on Network in the System Profiler left-hand panel, you should see a list of active services. This is a list of all possible network connections. One of these should be "Built-in Ethernet", and is also referred to as "en0" (Airport is "en1"). When you select "Built-in ethernet", its properties and settings appear in the pane below. This MAC address should, of course, be the same as the one in the Network preference pane.
    bd

  • Jdeveloper JSP-Struts (which is the right way to decalre a DataSource)

    Hello to all..
    I'am developing web application for a car assicuration.
    I would like to know which is the right "connection" (jndi name) to use in my application..
    I have made a JDBC connection to my production databse...
    Then I have made a Data Source from menu (Jdeveloper -> Tools -> Embeded Oc4J -> Current workspace -> Datasources...
    Here I have created a new DataSource from "Autocreate from IDE..."...
    My Question is.. which Class name I must use?
    Default class is: com.evermind.sql.DriverManagerDataSource
    I see that there is also a: oracle.jdbc.pool.OracleConnectionPoolDataSource..
    Which Class I must select? My application is used by many users online..
    Is there any axample on oracle to see how to use JNDI connections (connection pool)..
    I'am using Jdeveloper version: 10.1.2.1.0
    best regards
    Peter

    AFAIK all connections, DataSource ones included are created by calling the DriverManager. A DataSource is a factory for Connection objects (from JavaDocs)
    If you're talking about managing connections then it depends on the application. A DataSource is great for apps that can support many clients or are multi-threaded, but may require a JNDI implementation to get to it.
    If however you have an single threaded app that hits the database in a serial fashion, then DataSource is probably an overkill.
    Dave

  • Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

    function displayMap(e) {
    var title = e.data.title,
        latlng = e.data.lat + ',' + e.data.lng;
    if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
    window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
    } else {
    $('#map h1').text(title);
    $('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
    $.mobile.changePage('#map', 'fade', false, true);
    my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
    On iOS, calling window.location loads the map directly
    into the app. That’s great until you realize that iOS devices
    don’t have a Back button, so there’s no way to exit the
    map. To get round this problem, I loaded a static map as
    an image in the map page block. It’s not interactive, but at
    least you can continue using the Travel Notes app after
    viewing the map by clicking the Back button generated by
    jQuery Mobile.

    Well, this took me a while to get solved, but it is indeed solved.
    I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
    So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
    I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
    It all worked.
    Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
    Thanks for your help, you guys!!!

  • Hello Everyone, I want to purchase an ipad ,please suggest whether ipad mini is the right choice to go for or not?

    I am planning to buy an ipad mini, please suggest me whether its the right choice to go for or not ?
    Hows the display?

    The Ipad 4 has a stronger processor, and better graphics and display than the Mini. but they can basically do the same things.
    Obviously one is smaller than  the other, but at the end, the games will still play on both, and you may not even notice a difference.

  • Which is the best Open source API  for PGP??

    Hi All,
    Please tell me
    which is the best Open source API for PGP??
    Please Help me thi is urgent!!
    regards
    harish

    I am also looking at these topic at the moment.
    I found Bouncycastle and hushSDK.
    Have you found a good one and with example also?

  • Which is the best user-friendly IDE for swing program development

    Which is the best user-friendly IDE for swing program development

    I have seen Sun's Forte and IBM's Visual Age for Java.
    But Borland's JBulider 7 Personal Edition is far more superior than any of these.Borland's JBuilder is the Best.
    Ranga.

  • Which is the more powerful OS X for Mac?

    Which is the more powerful OS X for Mac?

       Thanks Barney, I get it! My English is not enough to explain exactly what I want to know... But I´ll try:
    That is a simple question of a new mac user (Myself). I have bought my first Mac and it came with a version I do not remember the name. There was an update called Maverick available for download and I updated. Ok? I hope you are understanding me.... The point is: I just want to be always updated about the best system for my Mac, because I see and I  hear many things about Mountain Lion, Leopard, Snow Leopard, etc...  And doubts come in my mind.
       Doubts like these:
      Which one is the best for my Mac?
      Which one is the powerful one?
      Which one over the Maverick (if there is one)I can run in my Mac no causing any problems?
      Can you help me with it?
       My Mac is a Mac Book Pro 4GB/250GB... These are the information I can give you now, my Mac is not with me.

  • How do i pick the right version of flashplayer for my lg optimus q phone

    How do I choose the right version of flashplayer for my lg optimus q phone

    Please try the Flash Player forum.

  • I had an old iPod classic 40 gb, now it doesn't work anymore; I have to add a new one (iPod classic 60 gb) to my iTunes: could you tell me which is the right procedure?

    I had an old iPod classic 40 gb, now it doesn't work anymore; have to add another one (iPod classic 60 gb) to my iTunes (windows XP), which is the right procedure?

    Plug it in and follow the onscreen directions. That you previously had an iPod doesn't matter.
    (58889)

  • Which is the right one?

    I just bought a new PowerMac G5 from my local Mac store. Now I want to drop in some more memory but when I go to OWC, Crucial, Techwork and the others, they're listing for RAM is all over the place. To add to the confusion some want to know if my Mac was 'late spring' 'late fall' PCI-X or Express or this or that. (head spinning) And it doesen't help when they throw in stuff like, 'Latency 4-4-4-12 , Non-ECC, Unbuffered, 1.8V' whatever that is...
    Although Crucial comes closest getting the names right.
    I checked the Apple web site and all the PowerMac G5's they list all come with the same PIC cards and so on...
    I checked my owners manual (even though it's contrary to being a guy) and it says RAM needs to be PC2-4200, 533MHz also known as DDR2-533 (great, RAM has an alias)
    sigh... So anyway, I'm finding DDR2-4200, DDR4200, PC4200, or just DDR2 533...
    Someone please point me in the right direction.

    Thank you for the replys. Something I forgot to
    include before; I keep seeing that it requires pairs.
    If I want to put in a gig of ram does that mean I
    have to get two 512's or can I simply drop in a
    single one gig stick?
    Same thing applies for two gig; four 512's or just
    two 1gb sticks?
    Hi Snap the frog;
    As you say memory must be installed in matching pairs with a card in each bank of memory slot in order for it to work correctly. Hence if you want an additional Gigabyte, you will need to install two 512 cards.
    Allan

  • Which is the right IDE to develop policy Agents in Identity Server

    Hi,
    Can any one tell me which is the right IDE to develop agents in Identity Server.Am thinking of using Sun One Studio??Any better IDEs??
    Thanks,
    Ramnath

    Your favorite text editor and a comman-line javac. What do you expect from an IDE?!

  • Which are the highly recommended JMS brokers for live deployment?

    Which are most widely deployed JMS messaging servers (brokers) in live applications?
    Which are the most recommended JMS servers for a new deployment?
    Any tips on these will be very helpful.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I have my dev server - I leave this on 512MB and that's fine for
    most of the stuff I do. We generally up this to a gig on our live
    servers (which only run 3-4 small sites), and historically we've not
    gone above this on our Shared servers (which host anywhere up to 400
    sites) because of the 32-bit limit.
    However, now we're running CF9 on 64-bit Server 2008, we've obviously got a lot more RAM available. The obvious choice is to ramp it up high, but I've also been heard that causes issues of its own - the Java GC then has far more work to do when it's called and as the memory fills it's harder to get a contiguous block of RAM, so performance can suffer.
    Leave the memory setting at the default value, until testing requires you to do otherwise, or your sites unravel some unforeseen memory demand. It's a risk our SysAdmin colleagues are prepared to take. With the coming of 64-bit, they've been on the alert, and have always cattle-prodded us whenever we've been tempted to push the button to go higher.
    Our defaults almost coincide with yours: 512 MB for 32-bit and just over 1GB for 64-bit. So what you yourself have just said is my own basic wisdom on the subject, too: if it aint broke, don't try to fix it.
    [postscript: I work full-time at one company, part-time at another. By pure coincidence, both use the same JVM memory settings.]

  • Which are the infotype we are using for payroll

    Hello , everybody
    which are the infotype we are using for payroll , time managemnt

    Hi,
    For payroll:
    0008, 0009, 0011, 0014, 0015, 0045, 0057, 0167, 0169, 0207, 0208, 0267, 0416.
    For time management:
    0007, 2001, 2002, 2006, 2007, 2010, 2013.
    For Indian payroll:
    Additional infotypes are from 0580 to 0589.
    Edited by: Velangini Showry Maria Kumar Bandanadham on May 14, 2008 5:39 PM

Maybe you are looking for