Which is the tracking code for my macbook with tnt

well which code is it i cnt track with tnt even though apple is showing it has left
w7*****
or
80******
thanks in advance

Gareth if you click the link in your despatch email for the order status
Put in the web order reference number, which is W****** and the shipping address postcode and click find order.
Then click track this shipment.
On the following screen it's the carrier tracking number that you can use on tnt.
Hope this helps.

Similar Messages

The build code for my macbook is 10K549. WHAT DOES THAT MEAN?

The build code for my macbook is 10K549. WHAT DOES THAT MEAN?

Open System Profiler in the Utilities folder. Note the two digits for the Model Identifier displayed in the main panel. Compare with:
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Table which stores the return codes

Hi All
I would like to know in which table the return codes for a BAPI get stored for the structure BAPIRET2.
Thanks in advance
Sree Ramya

Hi sree,
1. the return codes are nothing
but standard messages of the transaction.
2. such messages and their codes are stored in table T100.
regards,
amit m.

HT1635 How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

I've put a 250gb 7200rpm drive in an Early 2006 with no problems.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/HDE-SATA-Hard-Drive-Enclosure/dp/B001AAVA08/ref=pd_bxgy_pc _text_b
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

What is the Pin Code for unlock for Macbook Air System Lock ?

What is the Pin Code for unlock for Macbook Air System Lock ?

It usually means that the owner of the device sent a directive through icloud(find my mac), to lock the device because it has been stolen.
The only means to unlock the device is to have Apple (Apple Store) unlock it for the owner. If you are the owner, be prepared to show proof of legitimate ownership. It is likely that Apple will want to contact the registered owner to make sure that the device has been legitmately transferred.
I'm really thinking you may have bought stolen property. Ask the seller why it is locked, and if the device is registered to him/her, to release the registration on Apple's website. Only then, will you be able to re-register the device in YOUR name.

My friend bought the Lion upgrade for her MacBook. She would also like to upgrade her desktop Mac which is current running Leopard. Does she have to buy SnowLeopard for her Mac first? Both computers use the same apple ID and password.

My friend bought the Lion upgrade for her MacBook. She would also like to upgrade her desktop Mac to Lion which is currently running Leopard. Does she have to first buy a SnowLeopard upgrade for her desktop? And will the upgrade from SnowLeopard to Lion then be free? Both computers use the same apple ID.

She would also like to upgrade her desktop Mac to Lion which is currently running Leopard.
She needs to purchase Snow Leopard but she can re download Lion on the desktop for free after Snow Leopard is installed.
And definitely use the same Apple ID to download Lion on the desktop.
Mac OS X 10.6 Snow Leopard - Apple Store
Downloading past purchases from the App Store, iBookstore, and iTunes Store
edited by: cs

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

How to use Event Tracking Code for Google Analytics in Dreamweaver CS5

I need to track clicks on links that go to an outside website. I've read about "event tracking code". I'm not sure if it's the right tool to use. And if it is, I've spent several hours reading about it and I can't figure out how to use it. It looks like you need to be an expert developer to be able to make sense of all this. I've always been helped when I ask a question here, I'm hoping that someone can help me.
What my client needs is to know what links are being clicked, and how often. Here's the page where I want to do this: Available Homes - Arizona Vacation Home Rentals
I added a code that I created using the tool I found here: General Event Tracking Code for Google Analytics but can't see to be able to make this work. I added this code to the first link called "View it Here" for the top, left house. Here's the code: <a href="http://www.homeaway.com/vacation-rental/p3495538" onClick="ga('send', 'event', { eventCategory: 'clicks', eventAction: 'clicks on homes', eventLabel: 'Clicked'});" target="_blank">View it HERE!</a>
Then I set a Goal in Google Analytics like it said in the instructions but it doesn't seem to work... I would APPRECIATE ANY HELP!
Thanks,
Brigitte

I think you misunderstood what Event Tracking is designed for. This is from Google Help
Tracking Code: Event Tracking - Google Analytics — Google Developers
"Use this to track visitor behavior on your website that is NOT related to a web page visit, such as interaction with a Flash video movie control or any user event that does not trigger a page request."
Clicks on links are page requests. I think for your purposes, you may want the Cross Domain Link Tracking plugin.
Cross Domain Tracking - Web Tracking (analytics.js) - Google Analytics — Google Developers
Nancy O.

How to delete the region code for country in T005U

Hello,
The region code for XX country are changed, So I have deleted all entries for that country in transaction code "OVK2" and updated the new region code which should be updated in Table T005S and T005U.
But in table T005U there are few region code for language other then EN. Now I need to delete the entries T005U for other language.
Now region code in OVK2 = Table T005S, but not equal to T005U
How language can be selected to delete the region code (TABLE T005U), please advise.
Thanks in advance.
Praveen

Hi Praveen,
In order to delete the entries from the language table T005U, you will have to maintain in T005S.
It means that, suppose in table T005U, you have a region appearing in two languages danish and german and the corresponding entry does not exist in T005S, then follow the steps below.
1. Maintain Region XX in EN in T005S.
2. Log on in language Danish, and in table T005U, only delete the text and log off.
3. Log on in Language German, and in table T005U, delete the text only and log off.
4. Now your T005U table is clear, log on in language EN and delete from table T005S.
5. Check both tables T005S and T005U for the region XX. they both should be empty.
Regards,
SAPFICO

What are the main uses for a Macbook Pro, and also for a Macbook Air?

I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.

Here's an article that compares the two.
http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts

Which battery should i buy for a macbook 6,1

I have a macbook 6,1 Mac OS X 10.6.8, i bought it in the US. I live in Argentina where there are no mac products anymore, i have someone in Spain that can buy the battery there and bring it over, i know the battery must be replaced by a mac agency, i will do this here in argentina, there is a mac agency near my home but they dont have the battery i need. I just need to check the buttery model i should buy, i just want to be sure i am buying the right battery.
The specifications for my macbook are:
Información del hardware:
Nombre del modelo: MacBook
Identificador del modelo: MacBook6,1
Nombre del procesador: Intel Core 2 Duo
Velocidad del procesador: 2,26 GHz
Número de procesadores: 1
Número total de núcleos: 2
Caché de nivel 2: 3 MB
Memoria: 2 GB
Velocidad del bus: 1,07 GHz
Versión de la ROM de arranque: MB61.00C8.B00
Versión SMC (sistema): 1.51f53
UUID de hardware: C6780285-DD2A-5C94-AE1E-F4ED65B0A967
Sudden Motion Sensor:
Estado: Activado
Información de la batería:
Fabricante: DP
Nombre del dispositivo: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Versión del firmware: 0103
Revisión de hardware: 0002
Revisión de celda: 0130
Información sobre la carga:
Carga restante (mAh): 1786
Totalmente cargada: Sí
Cargando: No
Capacidad de plena carga (mAh): 1866
Información sobre el estado:
Número de ciclos: 781
Condición: Comprobar batería
Batería instalada: Sí
Amperaje (mA): 0
Voltaje (mV): 12035
Ajustes de alimentación del sistema:
Alimentación de CA:
Temporizador de reposo del sistema (en minutos): 0
Temporizador de reposo del disco (en minutos): 10
Mostrar temporizador de reposo (en minutos): 0
Activar al cambiar el modo de alimentación: No
Activar al abrir la pantalla: Sí
Activar al acceder a la red local: Sí
Fuente de alimentación actual: Sí
El reposo de la pantalla utiliza atenuación: Sí
Carga de la batería:
Temporizador de reposo del sistema (en minutos): 0
Temporizador de reposo del disco (en minutos): 10
Mostrar temporizador de reposo (en minutos): 0
Activar al cambiar el modo de alimentación: No
Activar al abrir la pantalla: Sí
El reposo de la pantalla utiliza atenuación: Sí
Reducir brillo: Sí
Configuración del hardware:
SAI instalado: No
Información del cargador CA:
Conectado: Sí
ID: 0x0100
Potencia eléctrica (W): 60
Revisión: 0x0000
Familia: 0x00ba
Cargando: No
Many thanks!

The following previous discussion indicates the correct battery for a MacBook 6 1 is the A1331
Re: DIY-MacBook White Battery Replacement

Here the SSCCE code for the prvious problem posted by me.

Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
     Container c;
     Toolkit tk;
     JLabel l1; int y=30;
     JPanel p1,p2,p3;
     JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
     JButton btSearch,btView;
     ButtonGroup bgSearch;
     JTextField txtSearch; BoxLayout boxl;
     ImageIcon i1;JScrollPane sp1;JViewport vp;
     public Temp()
          super("Search-Address Management System");
          c=getContentPane();
          tk=Toolkit.getDefaultToolkit();
          setSize(1024,768);
          c.setBackground(Color.BLUE);c.setLayout(null);
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          defineComponents();
          settingBounds();
          addListeners();
          addComponents();
          setVisible(true);
     public void defineComponents()
          p1=new JPanel();
          p1.setLayout(null);
          p1.setOpaque(false);
          p2=new JPanel();
          p2.setLayout(null);
          p2.setOpaque(false);
          p3=new JPanel();
          boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
          p3.setLayout(boxl);
          rbByName=new JRadioButton("First Name");
          rbByName.setOpaque(false);
          rbBySirName=new JRadioButton("Last Name");
          rbBySirName.setOpaque(false);
          rbByState=new JRadioButton("State");
          rbByState.setOpaque(false);
          rbByCity=new JRadioButton("City");
          rbByCity.setOpaque(false);
          rbByID=new JRadioButton("ID");
          rbByID.setOpaque(false);
          btSearch=new JButton("Search");
          bgSearch=new ButtonGroup();
          txtSearch=new JTextField();
          btSearch=new JButton("Search");
          TitledBorder tb=new TitledBorder("Search Criteria");
          TitledBorder tb1=new TitledBorder("Search");
          p1.setBorder(tb);
          p2.setBorder(tb1);
     public void settingBounds()
          rbByID.setBounds(20,30,50,20);
          rbByName.setBounds(120,30,100,20);
          rbByState.setBounds(20,70,80,20);
          rbByCity.setBounds(120,70,50,20);
          rbBySirName.setBounds(240,30,100,20);
          p1.setBounds(30,40,400,110);
          p2.setBounds(30,180,400,80);
          p3.setBackground(Color.ORANGE);
          txtSearch.setBounds(50,210,250,25);
          btSearch.setBounds(320,210,80,25);
          rbByID.setSelected(true);
     public void addListeners()
          btSearch.addActionListener(this);
     public void addComponents()
          p1.add(rbByName);
          p1.add(rbBySirName);
          p1.add(rbByState);
          p1.add(rbByCity);
          p1.add(rbByID);
          c.add(txtSearch);
          c.add(btSearch);
          c.add(p1);
          c.add(p2);
          bgSearch.add(rbByID);
          bgSearch.add(rbByName);
          bgSearch.add(rbBySirName);
          bgSearch.add(rbByCity);
          bgSearch.add(rbByState);
     public void drawtable()
          JTable t1=new JTable()
              public Class getColumnClass(int column)
                return getValueAt(0, column).getClass();
          if(y==30) //as temporay variable only to add the scrollpane once
               sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
               sp1.setBounds(30,300,660,380);
               c.add(sp1);
          JScrollPane sp=new JScrollPane(t1);
          sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
          sp.setMaximumSize(new Dimension(600,100));
          p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
          p3.add(sp);
          p3.revalidate();
          y=y+110;
     public void actionPerformed(ActionEvent e)
          if(e.getSource()==btSearch)
          drawtable();
     public static void main(String args[])
          new Temp();
}Please reply with the code required to be added.

the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
    - scroll pane
        - viewport
            - table panel
                - table1
                - table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested.

HT1918 what is the postal-code for lebanon ? I cand find it :(

what is the postal-code for lebanon ? I cand find it

From a quick search, some of the results that I've found seem to imply that Lebanese addresses can have postal codes, which consist of 8 numbers - the first 4 for the region, the second 4 for the building. Are you being forced to enter a post code ?
What sort of visa card are you trying to add, debit or credit ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

Enter the Section code for line number '000'

Dear Consultants,
While posting the Travel Expenses, The system generates posting documents but gives error as "Enter the Section code for line number '000'". Please advise me about the activity to which this error is related to. I am giving Document type as AB.
This error is seen only if the Expense Type is related to some Vendor account like Expenses by company (Service provider's vendor a/c) or Advances paid to the employee & Expenses incurred by employee (Employee Vendor account)
Regards,
Bindumadhav
Edited by: BINDUMADHAV AMBIKE on Mar 26, 2011 7:18 PM

I found that some validation criteria were maintained in Tcode OB28. We can edit those validation criteria to exclude Travel Management. OR it was suggested by FICO to use posting key as 34 instead of 31.
This solved my problem.

In E-Business Tax - In which table the tax codes are stored?

Hi All,
I am new to Financials. I have a requirement in which I need to list all the TAX CODES pertaining to AP and AR. Kindly let me know in which table the tax codes are stored in E-Business Tax module. Also let me know how the tax is associated with the AP and AR modules. Is there any column in the table to identify whether the tax is for AP or AR?
Regards,
Ahmed.

Hello Ahmed.
I was not aware that you were talking about R12. The information i gave you concerns 11.5.10.2. Anyway, i checked the ETRM's for R12 and checked that the tables also exist in rel 12. This is an excerpt from R12 ETRM:
TABLE: AP.AP_TAX_CODES_ALL
Object Details
Object Name: AP_TAX_CODES_ALL
Object Type: TABLE
Owner: AP
FND Design Data: SQLAP.AP_TAX_CODES_ALL
Subobject Name:
Status: VALID
AP_TAX_CODES_ALL contains information about the tax codes
you define. You need one row for each tax code you
want to use when entering invoices. When you enter
invoices, you can use a list of values to select a tax code
defined in this table. Your Oracle Payables
application also uses TAX_RATE to calculate use tax
when you enter a taxable amount for an invoice.
This table corresponds to the Tax Codes window.
Now you say that you cannot find the information into the tables. Are you working on a production instance. Are you sure that the taxes have already been defined?
Octavio

Which is the tracking code for my macbook with tnt

Similar Messages

Maybe you are looking for