Which JDK do you use: 1.3.1_03 or 1.4.0?

I just thought I'll ask this general question...
Sorry, I'm just kind of bored...but am interested in what other people are using...

Hi,
I'm using both, if you are not using the new features of jdk1.4,
you probably don't wana use jdk1.4. but it's faster then 1.3.1_03 and has print package which comes pretty handy.
it also depends, what are developing appplication or applet. if i'm developing an application, i rather use jdk1.4 but if i was developing applets, i rather use 1.3 bez of compatibility with MAC.
FEEL Free 2 AsK.

Similar Messages

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

HT201300 You have Macbook of some kind and it has two Thunderbolt ports. Which port do you use first for an external monitor/projector?

You have Macbook of some kind and it has two Thunderbolt ports. Which port do you use first for an external monitor/projector?

By the way, I have tried shutting of the display switching in the power settings. That was basically the only real answer I found anywhere. It didn't work.

Which interface would you use to list each element of a vector?

Which interface would you use to list each element of a vector?

The laugh's on you, twit! Nobody takes kindly to lazy bums trying to cheat on their homework nor exams. Take a hike loser!

Which statement would you use to confirm a transaction?

Which statement would you use to confirm a transaction?
a. COMMIT TRANSACTION
b. ROLLBACK TRANSACTION
c. CHECK TRANSACTION
d. VIEW TRANSACTION

a.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Which router do you use for AppleTV?

So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV.
The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station.
My gf had a belkin (I don't remember the model #) that no matter what, I could not get it to remain consistent i.e. had to restart almost every day, randomly showed port 3689 error, etc
I tried the normal stuff, enabling uPNP, port forwarding, etc..nothing helped.
With the AEBS (which I already had and made her get) everything was fine and dandy.
So my questions to you are:
1) If not the AEBS, which router do you use?
2) If not the AEBS, which settings did you have to set?
3) If not the AEBS, what is the model / firmware version of your router?
I noticed many people have problems that are the same things on this board over and over. And I've also noticed that it's usually the router and/or the settings that are causing the issues/inconsistencies.
This should be an interesting thread and should help steer people in the right direction.

capaho wrote:
Airport Extreme doesnt have enuf port forwards for most online games & so I avoided that one.
There is no limit (short of maxing out system capacity). It may not have the presets you want, but you can configure port forwarding manually.
indeed, i can confirm this.
i have many ports forwarded on my AEBS and it is very easy to configure to do so.

Which software do you use on the linux or unix platform

I am learning oracle, so I am wondering, in the real world, which software do you use to administrate oracle in the company, on the linux or unix platform? sqlplus?
certainly, I think you can also open the OEM GUI in linux or unix

If you are learning, surely enough , learning any o/s other than windows will help. About the industry, there is not just one player that rules in the o/s market. It depends on a lot of factors , cost being the most dominating one. Linux, being a little less costlier, is surely a good choice for many but so is HP UX or AIX. Without bothering about what is more popular, learn one which you can get your hands on in your learning environment more easily. For example, it would be tough to have a AIX based machine in your home and a linux based would be lot easier. So learn one, ,learn it good. When you go to a different shop, use your previous knowledge and learn the know-hows of that o/s as well.
HTH
Aman....

Which bag do you use for 14 inch wide screen?

Which bag do you use for 14 inch wide screen?
I got confused when searching for possible candidates. Almost all wide screen bags are designed for 15.4 inch. Few 14 inch bags are fit only for the normal 4:3 screen.
Any advice from you are welcomed!
Many thanks!

Hello,
Other brands you might want to look at are Brenthaven, Case Logic, Eagle Creek, EastPak, EZM, Jan Sport, Kensington, Swiss Army, Targus and Trager. There is also an earlier message thread here in the forum discussing carrying options, and a quick search of the Internet found some messages here, here and here that you might find of interest.
There really are lots of different solutions when it comes to carrying your ThinkPad, so it might be best to visit a few computer, electronics, office supply and sporting goods stores to find something you like and meets your needs (and budget). If you do not have your ThinkPad to yet, consider either bringing a tape measure or a piece of cardboard cut to the dimensions to "test" with bags.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

I agree - it's all about preference. I use the ThinkTank Retrospective 7. I *love* ThinkTank's attention to detail... everything from having a rain cover included with the bag, to having ingenius use of velcro (sp?) patches to enable you to "silence" the bag so it doesn't make the big "SCRATCH" sound when opening the bag during a quiet event, etc.
My best advice would be to do your research (which you're clearly doing) and have a clear understanding of the return policy wherever you buy it, and then don't be afraid to return it if you get it and feel it doesn't meet your needs. A restocking fee is a small price to pay to not be stuck with a bag that doesn't work for you. And if for any reason you get it and can't return it, there's always eBay.

Which tools are you using?

which tool are you using for modelling oracle objects?

thanks, but is it possible to create (to the databse) both attributes and methods of oracle objects with sybase power designer or just attributes as a table?

Limit Preview Size. Which setting are you using?

I'm not exactly sure how the Limit Preview Size preference affects my workflow. Which setting are you using, and why?
My preference is currently set to the v2.0 default 1/2 Size. My iMac's resolution is 1680x1050, and I'm using the Canon EOS 1D Mark III taking full size RAW images at 3888x2592.
regards,
Gregory

Gregory,
I use the default (which is 1/2 size) with no ill effects. Previews are used by external programs to gain access to photos in your Aperture library. (This is not the way your external editor works, though.) Your preview size will not affect your workflow. When previews are turned on, Aperture works on generating previews when you have something new of which to make a preview. I seriously doubt that making a small copy, versus making a smaller copy, would affect how long it takes Aperture (and therefore, how sluggish Aperture might appear.) The difference between making previews and not making previews can be significant.
nathan

Which ICONDOM did you use?

Hi,
I am curious to see which version of Icondom people use the most. I bought my Icondom on e-bay and it cames with the STATIC and also the LOW-TACK option, I used the low-tack on mine, which one did you use,
thanks
mike

I've been planning on getting an iCondom too & would love to hear from those that have used it/them.
THX!

How do you on board loop the memory using pci 6534 implementing LabVIEW. Which VI do you use?

How do you on board loop the memory using pci 6534 implementing LabVIEW. Which VI do you use?

Hello,
You will need to set the Pattern Generation Loop Enable attribute to ON in the DIO Parameter VI. This is
specified on page 2-22 of the 653x User Manual (Jan 2001)
Hope this helps,
LA

VirtualBox vs VMware.. which one do you use?

Which one do you all use here?
Which one do you think is better?
Before, when I was using Ubuntu, I always used VirtualBox, I guess I liked it.... But now thinking which one to pick.
I heard in VMware you can run some games (which I can probably run in Wine, but still).

I use VMware Workstation 7.
While I love Free Software, the Free version of VirtualBox lacks USB support, which is a big loss for me.
So, it's between two pieces of proprietary software, despite one being $0.
Workstation unofficially supports OS X guests (questionable legally, use Google), seems to have better guest desktop speed, and has better SMP and video acceleration for me.
Also, VirtualBox has been more buggy in my experience, especially with tiling WMs.
The one thing VirtualBox can do that VMware can't, though, is perform low-level operations on crApple devices: http://ranguvar.wordpress.com/2009/11/2 … irtualbox/
So, I keep it around to help out my friends who buy into those sorts of things.
QEMU is nice and KISS, good for testing alternative OSes like Plan 9 and other *nixes, just suffers from horrendous disk speed.
Last edited by Ranguvar (2009-12-18 03:58:58)

Which one do you use?

I recently started asking myself which stability and stress program to use.
Theyre many, but i usually chose between those 3:
1.Stress prime 2004 by Johnny Lee
2.Super Pi by the japanese record breaking guys
3.the well known prime95 (which i dont like to use to test my machines).
prime 95 lacks information and details IMO but is reliable(at least thats what people say), and many people dont know how to use it at first sight(including me), asking themself what is s11t this for?
super pi does not take much time to complete the 32million task, so im not sure about its reliability.
and finally the one that i think is the best is the stress prime 2004 which i like the most, and the funcitons are there and it shows everything in details. the source is taken from prime95 but redone to give better results and details.
so c'mon you o/cers, which one do you prefer ? maybe you can suggest another good one from the rest which you find interesting and reliable!!
and pls no everest or sandra stress test suggestions.
good day

Quote from: HighTest on 20-September-06, 04:09:34
I use the following: http://www.7byte.com/index.php?page=hotcpu
Hot CPU pro is available in an evaluation version that doesn't perform all the tests but still has an accurate diagnostic and burn in mode.
I licensed for the full features and find it works fantastic. Pressing the diagnostic performs tests of the chipset, cpu, memory, hard drive and more for 6 hours and then tells me the result. Or I can run Burn in and test it much more extensively.
LOL .. we had quite a discussion a few years back about this .
Here's a post thats quite amusing : https://forum-en.msi.com/index.php?topic=63480.0
I have experienced full so called "prime stable" test over 8 hours just having HotCpuTest fail as it just doesn't do prime numbers calculations or Pi calculations but some more and it's one of the best progs to get you down to earth when you thought your system was overclocked stable.
In addition back then there was some faults in prime95 build x.xx (don't remember) with certain setup with A64 page file size and amount of memory.
Was like talkin' to certain stoneheads back then .
Read the thread through and see why not only trust one cpu calculation/benchmark prog :D

Which JDK do you use: 1.3.1_03 or 1.4.0?

Similar Messages

Maybe you are looking for