Which kernel components should be applied together?

Hi all,
I thought there was a SAP note, which described the kernel components that should be applied together.
And I thought this was a i5/OS specific note.
There was a list from some component which always should be applied together and not seperate.
(e.g. DW, TP, r3trans....)
Do someone know this note or can give me the answer?
Regards
Tobias

Hi Christian,
thanks for your reply.
I know that SAP Support Packages stacks including tested components, which should work fine.
But sometime you have to apply for example a new DW Patch because of a known bug or something.
And I thought there was a note, that you shouldn't patch DW alone. Either you have to apply some other components with the DW together.
But when I understand you right, this is obsolete in the meantime...?

Similar Messages

Which kernel module should I use for Marvell Yukon 88E8001?

Which kernel module should I use for Marvell Yukon 88E8001?
a. sky2
b. skge
c. sk98lin

I found this in the kernel''s /driver/net/Kconfig:
config SKGE
tristate "New SysKonnect GigaEthernet support"
depends on PCI
select CRC32
---help---
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
It does not support the newer Yukon2 chipset: a separate driver,
sky2, is provided for Yukon2-based adapters.
To compile this driver as a module, choose M here: the module
will be called skge. This is recommended.
Looks like your module is "skge"

I am a mobile app developer in our University. which developer program should i apply ?

I am a mobile app developer in our University. which developer program should i apply to distribute the develpped University app?

How does the University want to distribute their app....to whom?
See:
Choosing an iOS Developer Program / Which Developer Program is for you?

Which tier i should apply it to?

Good day Hussein,
according to
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
when applying this Patch 8919489, should i apply it to application tier or database one?
Thanks & Best Regards,
HuaMin

Here is what i have got
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>which
perl
which: no perl in (/cygdrive/f/oracle/test02/apps/tech_st/10.1.2/bin:/cygdrive/f
/oracle/test02/apps/tech_st/10.1.2/jdk/jre/bin/classic:/cygdrive/f/oracle/test02
/apps/tech_st/10.1.2/jdk/jre/bin:/cygdrive/f/oracle/test02/apps/tech_st/10.1.2/j
lib:/cygdrive/c/oraclexe/app/oracle/product/10.2.0/server/bin:/cygdrive/f/oracle
/test02/apps/tech_st/10.1.3/bin:/cygdrive/f/oracle/test02/db/tech_st/11.1.0/bin:
/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wb
em:/cygdrive/c/Program Files/Intel/DMIX:/usr/bin:/cygdrive/c/vs9/VC/bin)
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>perl
-version
This is perl, v5.8.3 built for MSWin32-x86-multi-thread
Copyright 1987-2003, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.
F:\oracle\test02\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread>
Regards

DW 8.0 or CS3 - don't know which one I should get

Looking for advice on which DW version to go for. I'm
extremely new to DW and have designed many sites in the past using
FP, so it looks like I will be converting sites from FP to DW AFTER
I figure out what I am doing. I am confused on which DW I should
start learning. I got a book to help me learn the 8.0 version but
this was AFTER I saw there were no more trials for 8.0 and now I
have downloaded the free trial of the CS3 version and the book is
pretty much following along and have done a tutorial which turned
out good and was fairly easy to follow.
Is the CS3 version the newest and is it better than 8.0? Is
one harder than the other for beginners to learn? I've been doing
lots of searches on this forum as well as online but can't seem to
figure which is better and more user friendly. I'm seeing how
others are having problems with 8.0 and then also with the
additional download for 8.2 I think it was. I'm looking for some
expert advice from other users before I make the plunge and
purchase - which one ??

DWCS3 is way different from DW8, but not in ways that
necessarily hit you in
the face. The integration with Photoshop, for example, is
excellent. The
CSS rendering is excellent (but could still improve). The CSS
editing is
WAY better.
I guess if you aren't using CSS, though, you wouldn't
appreciate these
differences....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ethereal_Mike" <[email protected]> wrote in
message
news:f4keb5$g8v$[email protected]..
> Dreamweaver CS3 is not that much different than
Dreamweaver 8. CS3 added
> Spry
> components and has better rendering of CSS and a few
other things. I
> would say
> it is not going to be any more difficult learning
Dreamweaver CS3 than
> Dreamweaver 8. In either case, a good understanding of
HTML and CSS would
> make
> the transition much smoother.
>

Which uesr exit should I use by such a case

The requirement is to send the email to manager when anyone create or change the Material data by using MM01/MM02.
The function of sending email I have done but I don't know which user exit should be used to call the function.
I have tried MGA00001 >EXIT_SAPLMGMU_001>INCLUDE ZXMG0U02 and writed some code in the ZXMG0U02. (ex: break point) .but when I modified the Material and saved,the stop does not appear. whether I used a wrong user exit?

You can use enhancement MGA00001 (industry only) for this.
For more information, see the documentation for the following components assigned to this enhancement:
Function Calls :
EXIT_SAPLMGMU_001
Enhancement Number : MGA00001
If you want to send a mail for only material creation/ extend then you can you the badi BADI_MATERIAL_REF.
we don't have BADI 's for Change the Material master records.
If you want to send a mail for MM02 also then you can go for the Enhancement ' MGA00001' under the function module 'EXIT_SAPLMGMU_001'.
Thanks
Sekhar

Sd_mod, sr_mod: which kernel options?

Hello all,
I just started fiddling around with compiling my own kernel because I'm not satisfied with the performance/latency of my desktop system.
I thought it would be a good thing to start with
http://wiki.archlinux.org/index.php/Kernel_Compilation_From_Source
to get a hang of the whole procedure. I compiled a few kernels with minor changes (moving modules into the kernel etc.) just to see what happens and practice a bit. It all worked fine, adjusting menu.lst, mkinitcpio and so on...
Then I started to remove all the stuff that I (thought I ) didn't need for my laptop (TravelMate 4650). I ran into problems when mkinitcpio reported 'ata_piix' and other ata stuff missing but I went back to gconfig and it was easy to find out what I shouldn't have removed.
Now -- after ruthlessly double-clicking around in gconfig ("if it doesn't sound familiar, it has to go" ) -- mkinitcpio tells me I need 'sr_mod' and 'sd_mod', some really important SCSI modules (apparently). I don't even have SCSI devices but my disks are all /dev/sd* so that means I need SCSI support, right? This is the message:
[13:50:26][luke@calculon][~/kernelbuild/linux-2.6.23]$ sudo mkinitcpio -k 2.6.23-MY_ARCH -g /boot/kernel26-my-arch.img
:: Begin build
:: Parsing hook [base]
:: Parsing hook [udev]
:: Parsing hook [autodetect]
:: Parsing hook [pata]
ERROR: module 'sd[-_]mod' not found
ERROR: module 'sr[-_]mod' not found
:: Parsing hook [keymap]
:: Parsing hook [filesystems]
:: Generating module dependencies
:: Generating image '/boot/kernel26-my-arch.img'...SUCCESS
My problem now is that I can't figure out which kernel options are related to these two modules. The 'SCSI device support' section lists 'BLK_DEV_SD' and 'BLK_DEV_SR' which I activated with the 'M' (I looked up the config from abs to find the standard settings). I still get the same message. Does it make a difference (to mkinitcpio) if you mark something 'M' or 'Y'? I mean, does it realize that if something isn't there as a modul it might be integrated in the kernal already?
All in all I have to say is that the whole kernel compilation is not that complicated. I was always afraid to try but now (thanks to Arch) I started diving into the innards (eewww) of a Linux system. The important thing is to keep a working backup version in case something goes wrong (which will happen).
I've read a little (only superficially so far) about patching the kernel to increase performance/responsiveness on the desktop (which is my ultimate goal). There seems to be a big discussion going on (with Con Colivas and all) about this issue. I know, there are a lot of topics about this already but is applying kernel patches worth the effort? Can you feel a difference in performance? I've set the Processor Family option the Pentium-M (my CPU) and I set the Preemption Model to PREEMPT but that hasn't really made a difference. If you ask me, it's probably worse than before.
OK, the last paragraph was a little OT, my main problem are 'sd_mod' and 'sr_mod' . It takes 20 minutes to compile every time so I'm a little reluctant to just use trial and error with every module.
Thanks for immediate help or giving relevant links. Is there something that tells you exactly which module is linked to which config option? That would be really helpful.
--masterluke
Last edited by mmmasterluke (2008-02-13 13:47:56)

I tried to mkinitcpio with both scsi disk support built into the kernel and as a module both ways I am not able to make my system work with the new kernel.
I get the same error if I try to run mkinitcpio with scsi disk support build into the kernel.
When the scisi disk sopport is left to be loaded later as a module, mkinitcpio works fine but later while booting the system complains that the partition was not found, i.e /dev/disk/by-uuid/"some kinda code" was not found.
I am not able to boot into my new kernel.
please help.

(268625273) Q LAB01 Which service pack should we install?

Q<LAB01>: Which service pack should we install?
A<LAB01>: You should use the default installation of WebLogic server 6.1 without
any service packs that comes on you student CD. While web services support is
available on WLS6.1sp* the exercise set was design to use WLS6.1 without a service
pack and instructor feedback will be based on this assumption.
Adam

Hi,
Yes RTM version of SQL Server 2012 is not supported. You have to apply SQL Server 2012 SP2 below link will help you in doing it
http://social.technet.microsoft.com/wiki/contents/articles/25632.how-to-install-sql-server-2012-sp2-on-standalone-sql-server-instance.aspx
Above link also has link to download SQL Server 2012 SP2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

What level of Java patch should be applied With ABAP patch level 19

Hi All,
I have a newly installed Netweaver 2004 s XI system. the support pack level is
SAP_ABA         0019
SAP_BASIS      0019
PI_BASIS          0019
ST-PI                 0016
SAP_BW           0019
ST-A/PI             0000
What should be the level for Java package and JSPM should be applied. Can we apply level 17 or should ABAP and JAVA be of the same level??
Regards,
Priya

HI,
Actually now my Java version and all java patches are on the level 19. But my IGS is on level 13. The highest level available is also only 16. So do i need to upgrade my IGS as it will require kernel upgrade or level 13 is ok?
Regards,
Priya

Which kernel module for Intel PRO/100 S Desktop Adapt

Which kernel module I should load for support LAN Card "Intel® PRO/100 S Desktop Adapter" Board ID "751767-004" , Based on Controller 82550

Finded in /usr/src/linux-2.6.5/drivers/net/Kconfig
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
select MII
---help---
   This driver supports Intel(R) PRO/100 family of adapters, which
   includes:
   Controller Adapter Name Board IDs
   82558 PRO/100+ PCI Adapter 668081-xxx,
   689661-xxx
   82558 PRO/100+ Management Adapter 691334-xxx,
   701738-xxx,
   721383-xxx
   82558 PRO/100+ Dual Port Server Adapter 714303-xxx,
   711269-xxx,
   A28276-xxx
   82558 PRO/100+ PCI Server Adapter 710550-xxx
   82550 PRO/100 S Server Adapter 752438-xxx
   82559 A56831-xxx,
   A10563-xxx,
   A12171-xxx,
   A12321-xxx,
   A12320-xxx,
   A12170-xxx
   748568-xxx
   748565-xxx
   82550 PRO/100 S Desktop Adapter 751767-xxx
   82559 748592-xxx,
   A12167-xxx,
   A12318-xxx,
   A12317-xxx,
   A12165-xxx,
   748569-xxx
   82559 PRO/100+ Server Adapter 729757-xxx
   82559 PRO/100 S Management Adapter 748566-xxx,
   748564-xxx
   82550 PRO/100 S Dual Port Server Adapter A56831-xxx
   82551 PRO/100 M Desktop Adapter A80897-xxx
   PRO/100 S Advanced Management Adapter
   747842-xxx,
   745171-xxx
   CNR PRO/100 VE Desktop Adapter A10386-xxx,
   A10725-xxx,
   A23801-xxx,
   A19716-xxx
   PRO/100 VM Desktop Adapter A14323-xxx,
   A19725-xxx,
   A23801-xxx,
   A22220-xxx,
   A23796-xxx
   To verify that your adapter is supported, find the board ID number
   on the adapter. Look for a label that has a barcode and a number
   in the format 123456-001 (six digits hyphen three digits). Match
   this to the list of numbers above.
   For more information on how to identify your adapter, go to the
   Adapter & Driver ID Guide at:
   http://support.intel.com/support/networ … /21397.htm
   For the latest Intel PRO/100 network driver for Linux, see:
   http://appsr.intel.com/scripts-df/support_intel.asp
   More specific information on configuring the driver is in
   <file:Documentation/networking/e100.txt>.
   To compile this driver as a module, choose M here and read
   <file:Documentation/networking/net-modules.txt>. The module
   will be called e100.

How many cards should I apply for ?

So, recently, I applied for 2 new cards ( both with capital one) and got approved for both ( credit score is 621). Currently, I have 5 inquries on my credit report, hence, I'm wondering should I apply for one additiona card? Alternatively, should I simply build my scores higher in order to get a better card in the future? Thanks!

SuperMarioTex wrote:
Sure! Experian is 621, and 602, 600 ( Trans/Eq). Currently, I have a Wells Fargo Secured Card ( $300 Limit), which is almost 3 years old (long time for secured I know). The two new capital one cards both have $1,000 limits. I still have 3-4 baddies ( small amount med collections) that I will get removed within in the next 2-3 months via PFD. Additionally, I have a judgement ($1,800), which is 6 years old reporting on both Trans/EQ. Thanks for the detailed info. Don't apply for any more cards until the 3-4 baddies come off your report in the next 2-3 months. Once those come off, you will see a rise in score which will make you be able to get some really good cards. For now, work on the baddies. Congrats on the 2 CAP 1 approvals...

Should I apply for another store card?

MssRemaa wrote:
Right now I only have Cap One $700, Credit One $1k, Vs $350 and just got approved for Discover $1400...... I closed my Cap One last year b4 I started looking on this site.. My Vs was open May 2015, My Credit One was open for almost 2yrs ago. My curent scores are in my Sig..... Should I apply for another store card or anything to help build or just leave what I have? I've had a total of 5 Auto loan, one I'm still leasing, 2 personal loans from CU, and pay as agreed student loan...... all good accounts never late.....I have one issue on my TU but score just updated to 682 fico 8........ no issues on EQ 655 fico 8 but everything was not reported like my Bmw lease that's open now and a few others...... my Ex is frozen which is my lowest score with 2-3 issues. Any advice is appreciated!You don't need another store card. Just use what you have

Right now I only have Cap One $700, Credit One $1k, Vs $350 and just got approved for Discover $1400...... I closed my Cap One last year b4 I started looking on this site.. My Vs was open May 2015, My Credit One was open for almost 2yrs ago. My curent scores are in my Sig..... Should I apply for another store card or anything to help build or just leave what I have? I've had a total of 5 Auto loan, one I'm still leasing, 2 personal loans from CU, and pay as agreed student loan...... all good accounts never late.....I have one issue on my TU but score just updated to 682 fico 8........ no issues on EQ 655 fico 8 but everything was not reported like my Bmw lease that's open now and a few others...... my Ex is frozen which is my lowest score with 2-3 issues. Any advice is appreciated!

How should I apply patches to forms 6i?

Hi,
Someone told me that in order to work properly with forms 6i you have to apply patches.
How could we find that our forms 6i need patches in order to run properly on windows 2000 Server?
I have a metalink account, what patch of forms 6i I need and how should I download it and then how should I apply it to forms 6i from METALINK?
After applying required patch does forms 6i works properly in the future?
Thanks
Behari

Without having any details about your problem, there is no way of knowing if a "patch" will solve your problem. Additionally, there are no specific patches required which are needed to run on Windows 2000. All 6.0.8.x versions were certified on Win2k
However, the latest and last patch for Forms/Reports 6i is Metalink Patch ID# 4183804
This will make your Forms version 6.0.8.26

Which DVD format should I purchase

I am planning on burning a bunch of videos using iDVD, but I have never done this before. Which DVD fromat should I purchase.
DVD-R? DVD+R?
what is the difference?
Also, what about RW discs? Can DVD players play these ok? I know some cd player had/have problems playing CDRW, does that apply to DVD players as well?

First of all, depending upon your puter/burner you may not have a choice, some older models only burn -R but most recent Mac superdrives should support both
Having said that, -R seems to be a more reliable, more compatible way to go; I have had few probs with DVD players reading -R discs (these were on very old DVD players and with some suspicious DVD brands), a few more with + R. Most people on this forum would reccomend -R discs (Verbatim seems to be the preferred brand) and I would concur.
RW also seems to have more compatability probs.
No matter which format of media you choose, I would reccomend using iDVD to create a Disc Image then use your Mac's Disc Utility or Roxio Toast to burn the disc at a slow speed like x2 or x1. This seems to eliminate some probs

Should I apply for mortgage to see where I'm at????

Hello, we are hoping to buy end of this year. We have been working on raising our credit score to get qualified. The builder we like in our town uses a preferred lender, we were thinking of applying now just to see if it's even possible to get a mortgage with them and/or any suggestions they may have to get qualified. The preferred lender is Pulte Mortgage. Will this hurt our credit score significantly? any advice would be appreciated! Thanks

Right now I only have Cap One $700, Credit One $1k, Vs $350 and just got approved for Discover $1400...... I closed my Cap One last year b4 I started looking on this site.. My Vs was open May 2015, My Credit One was open for almost 2yrs ago. My curent scores are in my Sig..... Should I apply for another store card or anything to help build or just leave what I have? I've had a total of 5 Auto loan, one I'm still leasing, 2 personal loans from CU, and pay as agreed student loan...... all good accounts never late.....I have one issue on my TU but score just updated to 682 fico 8........ no issues on EQ 655 fico 8 but everything was not reported like my Bmw lease that's open now and a few others...... my Ex is frozen which is my lowest score with 2-3 issues. Any advice is appreciated!

Which kernel components should be applied together?

Similar Messages

Maybe you are looking for