Which letter prefix added to table of access sequence?

Hi,
As i know if i add 'b' as prefix for the table listed in access sequence for delivery ouput type. Then i could search this table in SE11, like b903/b930...etc..
But for billing pricing condition type, the table name of access sequence should be what??
Please kindly help.
Thanks!

Hi friend
You should try with the name A or Z
Regards
Srinath

Similar Messages

  • Unable to Download Condition Tables and Access Sequences from R/3

    Hi Experts,
    We have a new set of condition tables and access sequences created in R/3. Now we need to download them to CRM, which we are unable to perform. We tried downloading DNL_CUST_CNDALL, but there is no use. The new condition tables are not getting pupulated. Moreover when I download this object, the corresponding CNCCRMPRCUS* table for the new condition type is not getting generated in CRM.
    The strange thing is the above mentioned tables when created in "development and quality" boxes are getting into respective CRM systems. We are using CRM 4.0.
    Your help will be appreciated.
    Regards,
    Ajay

    Hi Ajay
    Please check the transaction SLG1 which gives you very good inputs on the errors which would have happened during customizing or condition download
    Check the customizing download by giving the following parameters
    Object : cond_exchange
    Subobject :customizing
    Give the date on which the recent customizing download of DNL_CUST_CNDALL was performed.Check whether there are any errors!!if there are errors on then those needs to be corrected so that the new condition tables and access sequences get downloaded correctly to CRM.
    Thanks,
    Abishek

  • Problem in Assigning  table to access sequence

    Dear All,
    i am facing problem in assigning table to access sequence for billing output type.
    I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
    but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
    bcause of this i am not able to make condtion record.
    Message is Select a document field for WERKS
    Regards
    ajit
    Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

    Hi SAP SD AJIT ,
         Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain  output  Determination for billing document --> Mantain condition table,  in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
    Regards,
    Mariano.

  • Condition table for access sequence (taxes calculation procedure)

    Hi,
    We need to perform tax calculation procedure in which there will be fields in condition table for a particular access sequence such that whenever we give the Country, Region and city in the condition table it will pick up the corresponding tax value.
    Condition table field -- KOTABNR.
    Path -->
    FI --  **** -- Taxes on sales / purchase -- Check calculation procedure -- Access sequences.
    Select tax calc say for country US with jurisdiction and check acess sequence. There we have condition table referred to as 53 and we can see the fields by clicking on fields.
    How to create a new condition table.
    Please guide me through asap.
    Thanks and regards,
    Priyajit Ghosh

    Hi,
    This does not allow us to create a new condition table. However we are allowed to change a standard SAP standard condition table. Is there any way to create a new Z table (condition table) . Please revert back asap.
    Thanks and regards,
    Priyajit

  • Regarding condition table and access sequence

    Dear SAP Gurus
    I have requirement as detailed below
    My taxation procedure is    TAXINN
    I have a new requirement is as detailed below
    for the Access Sequence JTAX --I wanted new  key combination as detailed below 
    Plant /Vendor/Tax code
    How to do this can any body will explain step by step procedure pls
    Points will be awareded ..
    Kindly clarify to me
    rgds
    Surya

    Hi  Suryaprakash,
        The Standard access sequence  " JTAX " , has only the key combination of tax classification with country code and tax code only. It is recommended for TAXXINN procedure.
       If you choose to go for the key combination of  " plant/vendor/taxcode " then there will be huge number of the resulting  total number of such combinations. Still if you want to create for the plant/vendor /taxcode combination , it is possible with combination.
    1.plant/vendor /material/taxcode
    2. plant/material group
    Thanks & Regards,
    Amjad

  • "People Picker" field not letting update SP linked table in Access

    Hello all,
    I have linked a SharePoint list to an Access database in order to manipulate some data. This list contains several fields, including a people picker in which its data come from SharePoint. 
    Once in my Access DB, I need to update some fields of this list, however when I try to change some values from a record that has the people picker populated I get the following error message: "you cannot reference rows created
    when you are disconnected from the server because this violates the lookup settings defined for this table". I only get this when I have values on people picker, I can proceed without any problem when I have it set as blank.
    So, do you have any idea on how to accomplish an update operation while having a people picker field populated?
    Thank you in advance.

    Hi Pedro,
    I recommend to check if the user populated in the RequestBy exits in User Information List in SharePoint site and the choices listed in Access for status field are existed in SharePoint Status column.
    Please refer to this thread for more details:
    https://social.technet.microsoft.com/Forums/office/en-US/8a7baf3b-5a3a-4631-82f9-b43d992155d1/updating-sharepoint-2010-list-from-access-2007?forum=sharepointgenerallegacy
    More reference:
    http://blog.incworx.com/blog/elizabeth-pecoras-sharepoint-blog/you-cannot-update-this-field-because-the-value-youre-trying-to-apply-is-not-valid-or-would-break-a-data-integrity-rule-error
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error in Access Sequence

    Dear All,
    Following is the case.
    Condition Type values are picked form condition record having access sequence based on sales organization.
    Now we want to pick the values based on Sales Organization and Material. So we added the required condition Table in the access sequence JDUM. This table already exists in the system and is not created.  But after adding the table in access sequence and maintaining the values the system is giving following error.
    749 Access Pricing Sales/Distribution JDUM 30 contains no fields
    When i go the IMG --> SD --> Basic Function --> Pricing --> Pricing Control --> Define Access Sequences
    Select the Access Sequence "JDUM" & when select the fields system flashes the message as below
    The field assignment has not yet been made
    Please guide me on the same.
    Thanks in advance
    Shailendra Panhale

    Shailendra,
    When you say 749 it means that its new access sequence created. Because by default access sequence existing in JDUM are tables
    110 Sales org./ Destination Country
    350 Sales organization.
    1. When you create Table "Release status and Processing status" should be active. -- Please Check
    2. AFter Creation of tables , we assign it as Access Sequence. save it
    3. Then choose the Access line and double click on the Fields tab provided.
    4. Then the fields corresponding to the access sequence will be listed with last fields as Relase status and Processing status.
    Please check
    Regards
    Sathya

  • How to assign fields to access sequence

    Hi expert
    i have assigned condition table to  access sequence but it contains nothinng.its not showing the fields available in the table
    can someone help me how to add these fields in acess sequence i was able to add condiion table in access sequence but it does't show any fields.
    thanks

    Hi
             Go to acessseqence and then select the particular table which u have added or ammended select the table and click feilds tab and after u go in to feilds select each feild and press enter and save do this for evry line in each field and after completing
    evry feild save and exit ....ur problem will be solved otherwise
    AccessSequence -> select table -> click on fields -> select the field with error and click on field catalog .
    From there select the field name manually and save .
    and please refer this link..
    Access sequence Issue
    Hope it will be help-full for you
    Thanks..

  • Multiple records in 1 access sequence

    Hi,
    Is it possible to have the system find multiple condition records in the same access sequence step?  For example, I have defined table 602 and added it in an access sequence.  I create 2 condition records with unique keys.  I want both to appear as output records in the billing document. 
    Table 602
    Condition type |  Billing Type | ZZPartner | Partner | Partner number | Medium
    ZD00               |   F2            |  ZJ           |  ZJ       |  1000111          | 2 (fax)
    ZD00               |   F2            |  ZK          |  ZK       | 1000777          | 5 (email)
    I want both of these condition records to appear in the billing output.  The way I have it configured now, only 1 record is determined.  The bold fields are the keys.
    Thanks in advance.
    Maggie

    Hi Maggie,
    As per system Understanding it searches for condition records by Access sequence,where in table has assigned.
    If you maitain two records for two types of scenario System stops at one record as record has been found and will not go and search further.
    So with your settings system should change as medium also KEYFIELD.
    Then system Differentiates 2 records and as per records the data will be determined.
    CHANGE TABLE 602 WITH MEDIUM ALSO AS KEY FIELD.
    Regards,
    Reddyy

  • Help required with Access Sequence for 'Delivery output' of Scheduling note

    Dear Gurus
    I need help with creation of an Access Sequence.
    I have created an access sequence for sales org and customer, where the communication is emailed or faxed to the CR party- Forwarding agent.
    BUT - some customers have more than 1 forwarding agent in their masterdata, and not all forwarding agents are wanting to receive fax/email, so if a condition record exists it will always try to send via the method set up against the customer.
    I need to create an access sequence which looks at the customer/ Forwarding agent combination, - I have created new condition tables and Access sequences to include Vendor, - but when i create delivery notes, - this is not working, - it is not recognising the access sequence at all, the vendor party/haulier is not being recognised at all- I keep getting access not made, Initialised field'     
    Please advise how i can get the customer/Forwarding agent scenario to work
    Many thanks
    Tony

    Hi Tony,
    The field SPDNR can not be entered directly in the feild catalog list.
    First it has to be included in the list through inculde or user exit......
    SPRO->Sales and Distribution>System Modifications->Create New Fields (Using Condition Technique)-->New Fields For Output Control---> Use INCLUDE for new fields in Dictionary (messages) or Use user exit for new fields (messages)  
    You ask your ABAP consultant to do this then it will be available in the field catalog list then u can select in the condition table then into access sequence and so on...
    Kindly Reward points if usefull.
    Regards
    vK

  • Access Sequence - Exclusive

    Hello Guys,
    I have got a question, this might sound a little easy for sap Gurus.
    The exclusive indicator prevents the system from reading the
    condition records ,if it found value for existing condition
    table.It is a control for the system to access condition
    record from the database.
    EX--:If you assign an exclusive indicator option for a
    condition table in access sequence ,and if the system finds
    condition records for condition table in access sequence
    ,then system does not go to the next condition table .
    My question is what if we do not check the exclusive, how does it behave??
    Will it search all the conditions records and after search which one will it consider??
    Many Thanks in advance
    Abhi

    Hi Abhi,
    referring to your question
    -My question is what if we do not check the exclusive, how does it behave??
    In this case system will populate all the condition records int he access sequence but will activate only one them with a green signal and others will have yellow signals.
    I do not have SAP access right now but it is sure that either system will  activate the first one or the last condition  record.
    It is a SAP standard functionality that only one basic price can be there in a line item,so for this reason other will be deactivated(yellow signal).
    Hope it clears
    Mohit Singh

  • Access Sequence for Sched Agrmt

    Can we use a condition table defined for one application ( for EL say with fields ccode , doctype and vendor ) in another app area ( say EV ).
    How to assign a condition table to access sequence ? i went through spro to access sequence def for the SChd Aggrement , when i create a new entry in acces sequence and save it , it gives an error message 'field assignment not made ' ?

    I dont think it is a good idea to use condition tables of one application in another.
    After you have created the access sequence there is something called access where you need to assign the condition tables to the access sequence.
    Go to transaction NACE to configure the access sequence.
    -Kiran
    *Please reward useful answers

  • Mapping of Payer (KNRZE) in Access Sequence

    When i assign the condition tables in Access Sequence, it assigns the field to document structure automatically. Is there a way I can change the assignment.
    For example, I am trying to assign Payerc (KNRZE) to Customer number.  However, system assigns Sold-to to customer number.

    Hi,
    In V/07 you need to choose your access seq, then access you want to assign the fields to and in the fields you mark the field you want to change the assignment, then choose Field catalog button on the bottom and from the pop-up shown choose correct field ans confirm. The assignment will be changed afterwards.
    Regards,
    Marcin

  • Customer filed in Access sequence

    Dear EXperts,
    There is an requirement from the business that they want to add customer field in access sequence i.e.MEK1 apart fron the existing field combination such as supplying plant /material and supplying plant /plant. Now the business is asking to add another combination such as supplying plant/customer/material.
    My concern is it advisiable to add customer field in MEK1, if we add what would be its implications on exisitng functionality from purchasing side.
    Kindly help.
    Regards,
    Prashanth

    Hi,
    It won't impact much on Busineess.
    Just add the condition table in Access sequence of same if you have already custom access sequence.
    or Copy the existing access sequence & add the Customer table in to that access sequence. then maintain the condition record as your client want.
    SAM

  • CONDITION TABLE FOR ADDING IN ACCESS SEQUENCE.

    Dear
    I want to create new condition table for tax procedure access sequence.
    Can somebody tell me the T-code or Path where I can check or Create new condition table which will help in getting the key combination (TAX CODE) in FV11.
    Thanks,
    Dhanu

    hi,
    path to create new condition table
    spro->mm->purchasing->conditions->define pricing determination procedure->maitain condition table.
    here u can maitain condition table, further u can assign the same in access sequence.
    in OBYZ  t-code as it is for taxes
    regards,
    sujit

Maybe you are looking for