Which MBPro setup w/ext. display do I want?

I recently purchased a 15" early 2008 MBPro (glossy) at a great price but my sister just asked me to pick out a new Mac for her. I therefore get a second chance at deciding what my own optimum system is as she will take my several week old MBPro if I choose to go with another system for myself.
My use is primarily digital photography. Also light video conversion and editing, general productivity, web development/maintenance, personal stuff like web surfing, e-mail, flight sim, i-chat, i-tunes, and so forth.
I just had a real look at the new aluminum MBP 15" and was impressed with it. I find the ability to use the new Apple LED display particularly attractive, as this monitor has been well reviewed and is attractively priced. Is this a good choice for calibration for color accuracy, or should I go for something like the NEC 2690 WUXI, which features high bit lookup table and calibration solution (for about $400 more)? If the NEC is better, I might as well stick to the early 2008 MBPro, possibly changing it for the matte screen version (available now at big discount). If the new Apple LED display will give as good or better performance for digital photography, then it might behoove me to go for the new MBPro as this monitor offers some nice features and would be seamlessly all-Apple. The total cost for either choice works out about the same.
To summarize, my choices are either spend more money on the NEC monitor and less on the blowout early 08 MBPro, or spend less money on the Apple LED display and more on the late 08 MBPro. The older MBPro also has an additional slight advantage over the new one in that it comes in a matte screen version. Any insights appreciated as I need to move on a purchase decision. Thanks in advance for comments!

I've never seen a way to do that for a Mac that shipped with ML. The very first thing I'd do with such a new Mac is clone the hard drive to an external drive and then never touch that partition for anything but to boot to in order to clone it back to the main drive as a "fresh" install.
You can use Disk Utility to create a clone, or either of two excellent third party choices; SuperDuper! and Carbon Copy Cloner.

Similar Messages

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.

My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.

Make sure the mini-displayport/TB plug is fully seated. It may look fully plugged in but isn't.
Make sure the Displays system preferences has an Arrangement tab. No Arrangement means the monitor is not being detected.
Do a smc reset.
If none of this works I suggest you take it back to apple (along with your mini).

ICR: msg FB_ICRC110 Recon. Process 003: Error in setup of recon. display

hello,
following with my tread [ICR: Define Reconciliation Process Detail Attributes|Intercompany reconciliation - help with customizing] I have already make trx FBICS3 - Select Documents store 2 documents at table FBICRC003T, looks good. But unfortunately when I run trx FBICA3 - Assign Documents Automatically or FBICR3 - Reconcile Documents Manually the system shows the following error message:
Reconciliation Process 003: Error in setup of reconciliation display
Message no. FB_ICRC110
Diagnosis
Your customizing for the reconciliation display is invalid.
when I go to customizing "Set Up Reconciliation Display" the system shows a "Run time error"
Runtime Errors         SYNTAX_ERROR
Date and Time          19.09.2008 20:20:30
Short text
     Syntax error in program "SAPLFB_RC_UI_VIEWS ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSVIM" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLFB_RC_UI_VIEWS " in include
      "LFB_RC_UI_VIEWSF00 " in
     line 1308:
     "The data object "V_FBRC0070C" does not have a component called "AUTO"."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP* "
     Error in the ABAP Application Program
     The current ABAP program "SAPLSVIM" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The following syntax error was found in the program SAPLFB_RC_UI_VIEWS :
     "The data object "V_FBRC0070C" does not have a component called "AUTO"."
Trigger Location of Runtime Error
     Program                                 SAPLSVIM
     Include                                 LSVIMU04
     Row                                     92
     Module type                             (FUNCTION)
     Module Name                             VIEW_MAINTENANCE_LOW_LEVEL
Does any body knows what is happening? Should I implement a SAP Note?
Thanks in advance

Hello Rafael,
Apparently you did not generate the customizing using FBICC. If you have not invested much effort in customizing settings I suggest that you implement note 1172591 and generate the customizing via transaction FBICC. After you run this and make sure that the transaction data tables are activated the programs should run (provided the customizing for the companies in FBIC032 is correct). Please go through the generated customizing settings and make sure that everything looks OK...
I also recommend implenting note 1161993. Whether you run FBICC or not it will help when going through the customizing settings. The most likely cause for the error messages is that there are some incorrect settings in your field catalog and due to this also in the display hierarchy setup.
I hope this helps you in your efforts,
Ralph

I forgot my id which i setup my ipad with

hi i forgot my id which i setup my ipad with ,what can i do?
<Re-Titled By Host>

If you forgot your Apple ID you should start follow this article to help
Apple ID: How to find your Apple ID

Is there any t-code in which the List of Customers Display?

Hi SDN,
Is there any t-code in which the List of Customers Display?
Like the MKVZ, this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Hi,
Following tcodes are related to List of customers.
MER5                   List of Customer Rebate Arrangements
RBPCT                  List of Customer Contacts
SWU5                   Consistency Test for Customer Task
S_ALR_87009951         List of Customer Open Items
S_ALR_87009952         List of Customer Open Items
S_ALR_87009958         List of Customer Addresses
S_ALR_87009963         List of Customer Open Items
S_ALR_87009975         List of Customer Line Items
S_ALR_87009976         List of Cleared Customer Items
S_ALR_87012173         List of Customer Open Items
S_ALR_87012174         List of Customer Open Items
S_ALR_87012180         List of customer addresses
S_ALR_87012185         List of Customer Open Items
S_ALR_87012197         List of Customer Line Items
S_ALR_87012198         List of Cleared Customer Items
S_ALR_87015021         List of Customer Open Items with Ren
VC/1                   List of Customers
VXBC                   SLS: List of Blocked Customers
Thanks,
RKP

Router Setup Web form display problem

When I open Internet Explorer 6 to my router setup page (192.168.1.1), the menus and control discriptions are missing. Internet explorer reports an error with processing some of the web scripts. I'm using: WRT54G V8. I have tried reseting the router but it does not fix the problem. I have tried using the Opera Browser but it has the same problem. Unfortunately, I can't attach a screen capture to this post. Any help would be greatly appreciated. Thanks, mm

I did some playing around and found that in "Save Mode" the setup web form displays properly. So I upgraded the router firmware in Save Mode, rebooted and now the setup form displays fine in regular mode. I should note that I also re-installed ZoneAlarms (firewall application). Thanks, mm

How to setup MSI Matrix Display on MSI Gaming Notebooks.

We made two guides: How to setup MSI Matrix Display (Multi Monintor Setup)
GT60/GT70:
http://faenl.msi.com/index.php?dir=Notebook/Guides/&file=How%20to%20setup%20MSI%20Matrix%20Display%20on%20MSI%20GT60%2C%20GT70%20Notebooks.pdf
GS60/GS70/GE60/GE70:
http://faenl.msi.com/index.php?dir=Notebook/Guides/&file=How%20to%20setup%20MSI%20Matrix%20Display%20on%20MSI%20GS60%2C%20GS70%2C%20GE60%2C%20GE70%20Notebooks.pdf
I hope this helps.

Thanks for msi fans to share this picture, it's also using MSI Matrix display technology ^^
Quote from: marylee on 04-March-15, 16:40:02
Now I can use three screens on my laptop!!! Super cool!!

Macbook heats up using ext display

My macbook 2.16GHz is dimming so I plugged in an older LG display and put the MB into clamshell. I notice that the MB is getting pretty warm. Is this because the lid is closed. Not only is the screen dimming and so is my eyesight. I'm wondering if heating up is normal, or if the display is too old and a newer one would be cooler? I really like the big screen but can't afford and iMac.
Thanks,
Connie

I'm using a macbook with Snow Leopard but the closed lid option was clitchy. We are supposed to put the MB to sleep and then open the lid ant the MB display would stay off. Didn't always work. The MB had a heat problem which caused a Kernal Panic yesterday. Not receiving any replies from this question I began again searching for one. I did a search of these discussion boards and couldn't find the link below because the way Discussions now works it didn't show up. So, I searched Google. It found the link below. End of part one.
I discovered the magnet fix in the link below which is primarily used for Lion, but I wanted a simpler fix for Snow Leopard. What I discovered is that all you have to do is Pass the little magnes over the sweet spot and the MB display turns off. The magnet doesn't have to stay on the computer sweet spot.
This makes me happy because who likes the idea of a magnet on their Macbook?
https://discussions.apple.com/message/15671167#15671167

Which Easy Setup when using stills only?

Hi,
I'm just wondering if anyone knows which Easy Setup preset option I should choose if I'm not using video at all, but just jpeg images to create a movie. I'm outputting for DVD to show on a regular (4:3) television.
Thanks,
Vic

Depending on your region: DV-NTSC or DV-PAL...
Regards
Nolan

When opening a PDF in IE 10 with Enhanced Protection Mode it displays "This website wants to run acropdf.dll"

I am running my application which requires JRE on Internet Explorer 10. Since the IE need to run in 64 bit mode, we have enabled the "Enhanced Protection Mode" in Security option of Internet Options in Advanced tab. But my application also opens
up PDF in the browser, when the page with PDF is invoked it displays "The webpage wants to run 'AcroPDF.dll'. If you trust this site, you can disable Enhanced Protection Mode for this site to run the control.(Disable)(Always Ignore)". And on
clicking any option the PDF is not displayed.
We would not be able to disable the Enhanced Protection Mode as the 64 Bit JRE would not be invoked for other part of the application.
Please let me know how to resolve this issue.
Regards
Navin

... and/or
Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
http://forums.adobe.com/thread/392489 )
Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4). They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
documents in the Web Browser'.
However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser. It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll.
And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
message bar at the bottom of the window. The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
I think it's about time Adobe released an x64 PDF viewer... Or at least there should be an open/save dialogue box in IE.
If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
(The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead. But it doesn't. And with the Reader add-on disabled you get the same page, but without the
message at the bottom.)

Display Do u want save changes or not? message while closing the window

Hi All,
I have one requirement.I developed one form that contains 4 windows.
I entered in the 3rd window and i have made some changes but not saved.when i close 3rd window it is not giving any message like 'Do u want save changes?'after closing the 3rd window cursor will go to 2nd window.if i open 3rd window again it is propmting the message(Do u want save changes or not?).How can i get this message while closing the 3rd window?
i have written the following code in app_custom body
IF (wnd = 'WINDOW1') THEN
app_window.close_first_window;
ELSIF (wnd = 'WINDOW3') THEN
lv_wnd_status := get_window_property('WINDOW2',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
     go_item('BLOCK2.ORDER_NUMBER');
     set_window_property ('WINDOW3', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSIF (wnd = 'WINDOW2')
THEN
lv_wnd_status := get_window_property('WINDOW3',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
set_window_property ('WINDOW2', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSE
app_window.close_first_window;
END IF;
Can anyone give me some idea.
Thanks in Advance
Edited by: DhanaSurya on Apr 27, 2010 9:41 PM

Iis this the only code which you used to hide/display window?
Might be some navigation is happening in your form. Like if there is relationship between window2 and window3's block and when you access the window2 then you try to move to the next reocrd and then you are try to go to the WINDOW3's block.
Or there is any CLEAR_BLOCK built-in bieng use in you form.
-Ammad

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Hi, Unfortunately my Laptop has died (which had my iTunes on it). I want to ensure my music on my iPhone 5 and my iPad Air are backed up. Also, I want to sort my music in the way I used to with iTunes. How can I do this with just these two devices?

Hi, Unfortunately my Laptop has died (which had my iTunes on it). I want to ensure my music on my iPhone 5 and my iPad Air are backed up. Also, I want to sort my music in the way I used to with iTunes. How can I do this with just these two devices, i.e. NO Computer? Can the iCloud help? Why can't I download iTunes (i.e. my library as I saw it on the computer) to these devices? Thanks to anyone who can help me here.

You can change the email address of one's appleID...
I'd recommend changing moms email to yours to get a good backup on the Mac
Then switch mom's back to hers
Then change your account to the same email you used.
I've done something similar when I needed to update my Apple account (one ID changing email addresses and phone)

Which MBPro setup w/ext. display do I want?

Similar Messages

Maybe you are looking for