Which memory to be installed?

While installing an application on my N97, some ask which memory to be installed, than I choose E (mass) instead of C (phone). But some does not ask, and be installed onto C directly. For ex, Ovi Maps and Quickoffice. I would like to reinstall them onto E memory to increase the free amount on C. How can this be possible?

Some applications can ONLY be installed in the Phone memory. OVI Maps (Application installer ) is one of these. Though you can install the Maps data that require a considerably high storage space on to the Memory card..
.. so the only way to keep Phone memory free is to install any application that gives you option to select either Phone memory or Memory card on the MC..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

Hi, can you advise me, which SSD i can instal to my iMac Thanks.       Model Name:          iMac   Model Identifier:          iMac12,2   Processor Name:          Intel Core i5   Processor Speed:          2.7 GHz   Number of Processors:          1   Total

Hi, can you advise me, which SSD i can instal to my iMac
Thanks.
Model Name:          iMac
Model Identifier:          iMac12,2
Processor Name:          Intel Core i5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB

HI..
Read here > Requirements for Mac OS X v10.5
Your Mac meets the requirements but make sure there's enough free disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
edited by: cs

Hi, can you advise me, which SSD i can instal to my iMac Thanks.    Model Name:     iMac   Model Identifier:     iMac12,2   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz   Number of Processors:     1   Total Number of Cores:     4   L2

Hi, can you advise me, which SSD i can instal to my iMac
Thanks.
Model Name:          iMac
Model Identifier:          iMac12,2
Processor Name:          Intel Core i5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB

Hi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe

K8N Neo Platinum: Which memory slots should I use?

I just got some OCZ Platinum Rev2 PC3200 memory. Which slots should I install them in 1-2 or 1-3?
I'm wondering if a 1-3 configuration could have an effect on my trying to overclock my system? At 220FSB, I have to loosen the timings to 2.0-3-3-10 at 2.75 or 2.8 volts. I find this oddly suspicious that I'm already forced to give extra volts to the memory at this low an FSB, and that furthermore I cannot continue to run at 2.0-2-2-10 at this FSB.
Could my 12volt rail have an effect? I can't get my system to post at 230FSB, no matter the voltage I give to both the CPU and memory. I've dropped my HT to 3X, my multiplier to 9X, given my CPU 1.6V and my memory 2.8V, but I can't post.
Wondering is getting a better, bigger PSU like the OCZ PowerStream 520 would help me with the above issues?

Hi Chickpea,
On top of this forum, theres a sticky, with the title of 'Memory placements & Sizing Charts' - Should answer your questions and more
Heres the link:
Memory Placement & Sizing Charts

Memory Slot Utility "memory modules are installed in the recommended slots"

I've got two Mac Pros that give me this message. Every time I boot them up the Memory Slot Utility gives me the message that my memory modules are installed in the recommended slots.
This started after I installed an additional 8GB of RAM, bringing them up to 16GB. 8x2GB sticks.
I checked the login items and it's not there, so what else could I be missing?

I have this problem too on a Mac Pro Quad Early 2009.
Has 2x4GB + 2x1GB Runs fine with 10GB, but everytime I log in the memory utility pops up as if I have a problem.
How do I stop it annoying me?

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

Hi,
I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
-cRIO-9113 4 slot chassis
In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
-cRIO-9022 Real-Time Controller
-NI 9144 8 slot expansion chassis
In this chassis I have installed:
-Slot 1: NI 9213 (16ch thermocouple inputs module)
-Slot 2: NI 9201 (8ch ±10 V analog input module)
-Slot 3: NI 9263 (4ch ±10 V analog output module)
-Slot 4: NI 9426 (32ch sourcing digital input module)
-Slot 5: NI 9426 (32ch sinking digital input module)
-Slot 6: NI 9476 (32ch sourcing digital output module)
In the controller I have installed the following softwares:
-IndCom for EtherCAT Scan Engine Support 1.2.0
-LabVIEW NI SoftMotion Module 9.0.0
-LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
-LabVIEW Real-Time 9.0.1
-LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
-Web Server for LabVIEW RT 2.0.0
-Language Support for LabVIEW RT 1.0.0.3
-NI Scan Engine 1.1.0
-NI Scan Engine Advance I/O Access 1.1
-NI-Motion 8.0.0
-NI-RIO 3.4.0
-NI-RIO IO Scan 1.4
-NI-VISA 4.6
-NI-VISA Server 4.6
Well, I made VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
Ferdinand Martinez
FMO Automation LLC

Hi nausfaratu,
Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

BIzTalk schema exposed as wcf service deployment in WIndows server which dont have bizTalk installed

Hi All,
I am deploying my Biztalk wcf service (exposed from Schema) in SIT environment which dont have BizTAlk installed. But BizTalk is installed in One server and Webservices are there in another server.
When I browse the service, it is throwing errors as below.
Retrieving the COM class factory for component with CLSID {9D0E435E-4CCE-4536-83FA-4A5040674AD6} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
[COMException (0x80040154): Retrieving the COM class factory for component with CLSID {9D0E435E-4CCE-4536-83FA-4A5040674AD6} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).]
Microsoft.BizTalk.Adapter.Wcf.Runtime.TransportProxySingleton..cctor() +23
So please advise me on this. Am I going in correct way? Is it possible like this or do we need to install BizTalk for BizTAlk wcf services also in that environment?
Thanks in Advance

Hi,
If you wish to deploy BizTalk WCF services onto another server, you can do so but you need to install BizTalk
there. This is needed because some dlls are needed for the BizTalk WCF services such that it can point effieciently to the receive location in another server (where actual BizTalk application is running). Also the BizTalk runtime is needed in the other server
and hence you need to just install BizTalk on the other server.
Now if your other server is in the DMZ, then you might not go with the above option of installing BizTalk
over there. In that case you need to install Microsoft ISA server (Internet Security and Application Server) and configure your DMZ with that. In that case you can host your BizTalk WCF services over there and make it point to the actual receive locations
on your BizTalk server.
Rachit
Please mark as answer or vote as helpful if my reply does

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

How much memory can I install in my mac book pro?

Mac book pro 2.4 GHz late 2011 i7....How much memory can I install? Currently have 4Gb but want to run Win 7 on VMware and want to make sure my user has enough

The position of Apple is that the Late 2011 can take 8 GB, however, OWC, http://www.macsales.com and Crucial, http://www.crucial.com both guarantee their 16 GB ram packages to work. Both are sellers of high quality ram that is guaranteed to work in Macs.

Iv just bought Ipad 2 for back home in UK in usa. I'm trying to set it up for the plane ride home on my sisters pc which already has itunes installed. Will I be able to sync it with my own PC back home.

Iv just bought Ipad 2 for back home in UK in usa. I'm trying to set it up for the plane ride home on my sisters pc which already has itunes installed. Will I be able to sync it with my own PC back home.

Yes, but all the data from your sisters PC will be erased and replaced with yours, which is probably what you want anyhow.

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Which software I should install to view video file AVI format on my Imac?

Which software I should install to view video file AVI format on my Imac?

It's hard to say. AVI doesn't exactly describe how the video was encoded. AVI is a package that contains the video content.
However, VLC can play just about anything. That's the first thing I'd try.

Which memory would you perfer

ok i was reading alot of messages about memory for the k7n2 delta l board and i cant stop thinking which memory i should get i understand cheap memory is cheap and good is good all i have is $110 to spend on memory since i m low on cash because of college and i need 1 gb of memory pc 3200 in dual channel and right now i got ocz , crucial , corsair or mushkin on my mind right now and im not sure which i should get for this price rage that would do decent or good for gaming so i really need all your guys help right now so i wont mess up on getting somthin that wont work on my pc and be hurt on cash.

Hello,
For $110 you will not get anything good and 1GB (2x512MB)
Gigaram Mach 1000 2x512MB 2-2-2-5 $118
http://www.newegg.com/Product/Product.asp?Item=N82E16820221134
OCZ EL GOLD 2x512MB 2-2-2-5 (UTT BH-5) $139
http://www.newegg.com/Product/Product.asp?Item=N82E16820227211
G.SKILL 2x512MB 2-2-2-5 (TCCD) $147
http://www.newegg.com/Product/Product.asp?Item=N82E16820231013
GEIL ultra-X 2-2-2-5 $149 (UTT BH-5 or TCCD)
http://www.newegg.com/Product/Product.asp?Item=N82E16820144332
Patriot 2x512MB 2-2-2-5 (TCCD) $165
http://www.newegg.com/Product/Product.asp?Item=N82E16820220033
Mushkin 2x512MB 2-2-2-X (TCCD) $166
http://www.newegg.com/Product/Product.asp?Item=N82E16820146355
OCZ EL Platinum REV2 2x512MB 2-2-2-5 (TCCD) $169
http://www.newegg.com/Product/Product.asp?Item=N82E16820146890
Kingston HyperX 2x512MB 2-2-2-5 (TCCD) $189
http://www.newegg.com/Product/Product.asp?Item=N82E16820144161
CORSAIR XMS TWINX 2x512MB 2-2-2-5 (TCCD) $197
http://www.newegg.com/Product/Product.asp?Item=N82E16820145523
TCCD requires less voltage to work so it is the better choice, it will not get as hot.
And in some motherboards the higher voltage does not always work.

Which memory to be installed?

Similar Messages

Maybe you are looking for