Which memory type does my S10-3s use?

I just got a S10-3s and so far I'm pretty happy with it. I have had one very bad experience though, and I'm trying to avoid a repetition. I wanted to upgrade the memory to a 2GB block and so I bought a block when I purchased the netbook - the store clerk had a look at the computer specs and gave me a 200 pin SODIMM block.
After arriving home, I then almost trashed my new laptop because of the utterly ridiculous case design (sack the responsible person). Only to find that the 200-pin SODIMM does NOT in any way or form fit into the laptop. From what I can tell, what's needed is a 204-pin block.
However, when I try googling for appropriate memory blocks while comparing against system hardware info, I fail to fnd anything of use. Hardware output tells me I'm using a SODIMM 667 MHz block. When I look for SODIMM 667 MHz blocks with 204 pins, I get nothing - because 204 pins are for DDR3 and that comes at 1066 MHz and above. So which works for the S10-3s? I need to go and get my new mem-block exchanged for something proper, and I really want to avoid having to open my netbook more times than I need to (seeing as it's Lenovo apparently is trying to top Apple in poor case design).
Any pointers appreciated
Solved!
Go to Solution.

Use this one: elixir 2GB DDR3 204 pins. It uses DDR3 RAMs. It works without updating bios

Similar Messages

Which order type gets collected and is used for forecast consumption

Hi all,
I would like to know which Order Types (transaction types) get collected into ASCP (appear as demand) and which Order Types are used for forecast consumption.
I tried to find something in the user guides, but had not yet success :(
What I want to do:
1. decide which order types are collected or not
2. decide which order types consume forecast or not
Anyone any advices?
Big thanks in advance,
David.

Hi,
Rather speaking like Order types, we may use word Sales Order. ASCP will collect all the Sales Orders for which we need to intiate action for Supplies. How it is determined?. It is determined from SO lines where in we have So lines are scheduled(it is prt of Workflow action too) and It is flaged 'Yes' for "Visible Demand Flag" . This is what designed functionality. We do not care what type of order type it is.
thanks,
dr

Which flash plugin does kindlefire 2nd generation use

which adobe flash pludin does 2nd generation kindefire use

hello andy, if you don't want to use click to play then disable it again - enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''plugins.click_to_play'''. double-click it and change its value to '''false'''.

Which iOS SDK does AIR 3.5 use?

How can we find out which iOS SDK is being used by Adobe AIR?
We're using Adobe AIR SDK 3.5 with Flash Builder.
Is it possible to change the iOS SDK?
The -platformsdk compiler argument shows as unsupported inside Flash Builder.
Thank you.

Thanks for the quick reply.
Can you please take a look at our other thread here -
http://forums.adobe.com/message/4834786#4834786
We're facing some difficulties with iPhone/iTouch (4th Generation) devices running iOS 6.

Which JRE type does the client have? (64bit or 32bit)

Hello all,
I'm needing a way to programmatically find out whether the client machine is running a 32bit or 64bit JRE.
The reasoning for this is down to this a 32bit JRE will load only 32bit dll's and a 64bit JRE loads only 64dll's.
Problem occurs when a 32bit JRE is installed on a 64bit machine (64bit Windows), when the customer tries to use the 64bit program it fails because the installed 32bit JRE tries to load 32bit dlls (which arent there as the program is 64bit).
Anyway as the Java code is different (different API for the 32/64 dlls) so I would like to run a check before the program installs that the client has got version that matches their installed JVM.
Thanks in advance!

Examine [os.arch|http://pscode.org/prop/?prop=os.arch] or [sun.arch.data.model|http://pscode.org/prop/all.html?prop=sun.arch.data.model]?
I understand the first is what webstart uses to serve up natives according to the underlying hardware architecture.

Which App Store does the iPad Mini use?

I know this is probably a stupid question, but just to be sure; among the apps available to iphone and ipad, and the apps only available to ipad and what-not, where does the iPad Mini fall in? Does it have access to all the apps on the iPad and the iPhone or how is it set up? Thanks in advance!

The iPad mini is an iPad, not an iPhone, so it uses the same apps as any iPad. However, it is not quite so clear cut, since any number of iPhone apps can also be run on an iPad, and very many can be used on both. The app descriptions will tell you what devices, as well as version of iOS, the app is compatible with.

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

790fx-gd70 Memory - which brand / type is most compatible?

I have just recently built my first PC using the MSI790fx-gd70 (thanks to some helpful advice from Svet, Bas, and Miles). I encountered a problem early on pertaining to the memory. I had originally purchased 1.65 volt ram and this board only supports 1.5 volts (thank you Newegg for your lack of tech specs). And in doing some reading, it seems that this board only supports up to 1333 speeds without overclocking. I plan to OC down the line, however i am really only interested in utilizing my PC on default settings for the time being. A friend of mine has loaned me a 2GB stick of 1333 Wintec ram. Of course i plan to return this to him shortly, after i have purchased my own memory.
My question is, which brand/type of memory is most compatible with this board? I have looked through the test sheet for this board and it seems as though Kingston, G Skill, OCZ, and a few others have been successful, however i am wondering what the people think. If any of you folks have this board, could you give me a little insight on your preferences for dual channel, 1333 (since that is as high a speed i can get without OCing) ram sticks? I would prefer to purchase 2, 4GB sticks of 1333. any thoughts?
Thanks all

Yeah some Cruical Ballistix would be awesome.
Anything Crucial, Kingston, or Corsair you really can't go wrong with. I have used Kingston and Corsair on my 790FX before I got rid of it. They both worked fine.
BTW if you are looking for Corsair XMS:
http://www.microcenter.com/single_product_results.phtml?product_id=0347304 these are really good. And if you live near a Microcenter you don't have to deal with that shipping back and forth if something is wrong.

Which Data-Types can be used as Widget Parameters?

Hi,
I have been playing about with widgets (specifically widget parameters) for a while now.
I've got to wondering, exactly which data-types can Captivate turn into widget parameters?
So far I know that you can use:
Numbers,
Strings,
Arrays,
Objects
and Booleans,
as parameters.
Which ones am I missing?
I know some don't work, because I tried storing a MovieClip as a parameter and that didn't work.

Hi Eccles,
You can set all basic data types supported in flash viz.,
1)Numbers
2)Strings
3)Arrays
4)Objects
Since in Action script , an Object can be anything (array , array of objects , array of objects which by themselves are array of objects and so on ) , you can virtualy send anything as widget params
But there are two caveats to this
1)Object References
-Object References do not have any meaning once the swf is closed.But the widget params have to be stored across sessions.So If you send a reference as part of widget params it is not going to work.
This is why sending a Movie Clip (which is actually a reference to an Object ) does not work
If you want to send such things you will have to 'serialize' the object.
2)Size of the Object that you send
The size of the object that you send can have an impact on performance.And since any object that you send has to be converted into XML , objects like bitmaps can turn out to be huge and difficult to handle.
This brings us down to this - you can send any object across as widget param as long as it is small and serialized.

6500 running in native - which memory is used? SUP or MSFC?

Hi,
I have looked at memory requirments for IOS images.
When minimum DRAM and flash requirments are listed, which memory is this? Because the switch in running in native IOS it could be either?
I'm fairly sure that the flash is use id the Supervisor flash, but I'm not sure about the DRAM.
Does anyone know??
Thanks,
Dave

Depending on if you are dealing with 12.1E or 12.2S code, there are different requirements.
For example, for the sup2:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2561255
256MB is required for both the supervisor and the MSFC2 if running 12.2S code.
For 12.1E code on the sup2:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp1408120
128MB is recommended for the sup and 256MB for the MSFC2
Specific requirements for the other sups are also documented in the Release-notes. If you are going to have a large number of routes on the switch, it's recommended to have the same amount of memory on the supervisor and the MSFC as both processors keep their own copy of the FIB table in their local memory. Memory recommendations for various thresholds of route table sizes are also documented in the release notes.
HTH,
Bobby

For Inventory Adjustment : Which Idoc type to be used and why?

Hi Gurus,
For Goods Movement in one of the MM-Purch Implementation I used the Idoc type : MBGMCR03
at that time inventaory was not playing a big role.
But for now for doing inventory adjustment (Inventory has importance now) which Idoc type to be followed:
Can I use same Idoc type : MBGMCR03
Or Shd I go for Idoc type : WMMBID02
In some threads I read if MM you shd. go for MBGMCR03 and for IM : WMMBID02.
But why I dont know the answer...
Please give me your views on this.
Thanks
Amresh

MBGMCR03 is basically the BDBG idoc type and uses BAPI_GOODSMVT_CREATE to post the goods movement... You can check the documentation for the FM /BAPI to determine what kind of goods movement is possible. You can look at T158G table to find the t-codes supported. If you can post your inventory adjustment using the BAPI, you can use MBGMCR03, as long as middle ware can support that format...
As far as the WMMBID02, It uses the IDOC FM (which in turn also uses the MB_CREATE_GOODS_MOVEMENT)..

Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?

Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?

Welcome to the Support Communities. The answer to your question is available in Apple's website — see the Input/Output section here:
http://www.apple.com/ipad-mini/specs/

WHICH CLASS type of 4GB microSDHC does 5610XM supp...

1. Any microSD(T-Flash)more than 2GB is known as "microSDHC".
2. A 4GB microSDHC has three(3)class types, which are Class 2, Class 4 and Class 6.
3. 5610XM can support microSDHC upto 4GB.
Seems that there is no mention in the manual regarding to the captioned. I wonder if class 4 or class 6 - 4GB T-Flash (microSDHC)will 5610XM support?
My question is "WHICH CLASS type of 4GB microSDHC does 5610XM support?"
Please give a hand~~ many thanks!
Quoted from -
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
What is Class Speed Rating?
The SD Association has created and defined 3 speed classes to help you identify speed and performance capabilities/minimum requirements of SD/SDHC, miniSD/miniSDHC, and microSD/microSDHC cards and the host products.
The SD Speed Class Ratings specify a minimum sustained write speed for SDHC/miniSDHC/microSDHC cards (Class 2: 2 MB/s; Class 4: 4 MB/s; Class 6: 6 MB/s*).

Sandisk SDHC cards will work with the 5610. It is unknown if cards larger than 4GB will work, as no one has mentioned it yet.
Here are the specs for the sandisk card:
http://www.sandisk.com/Products/Item(2369)-SDSDQ-4096-SanDisk_microSDHC_4GB.aspx
.Message Edited by psychomania on 27-Nov-200703:22 PM

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12

I cannot upload any pictures to Flickr for the past three days, I just get the upload screen which when I click on upload does nothing I'm using PSE12, I have had no problems in the past , I still have had no response to this post and it has been several weeks since initially posted, is there anyone awake at Adobe, can someone give me advice or is there total lack of interest once the product has been purchased I have been a customer of PSE for many year since PSE6 now on 12 but lack of response may cause me to rethink

Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
http://support.apple.com/kb/HT1808

Which memory type does my S10-3s use?

Similar Messages

Maybe you are looking for