Which MIDI keyboards work with Logic Pro x and Yosimite?

can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Similar Messages

Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

Hi. I'm new to this community but would really appreciate some help.
I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
Has anybody got a 61 key which works seamlessly with Pro X?
Any help would be much appreciated.
Thanks.

To "The Art Of Sound"
Hi. I doing next.
1. I create new project
2. I select Yamaha Grand Piano
3. I play something in "live" mode. All is ok
4. I play something in "Rec" mode. All is ok
5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
6. I record third track with Yamaha Grand Piano. All is ok again.
7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
If I start to press chord notes without breaking, Logic Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
I experimented with NI Kontakt 5. Kontakt plays wrong notes!
I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
Why some instruments play wrong notes and other instruments play correct notes in the same project?
I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

Will my Unitor8 non USB Midi Interface work with Logic Pro 8 (MacOSX 10.5.8

I just purchased one of these Unitor8 gizmos, but have no way of connecting it with my Mac due to the absence of the USB connection on the MIDI interface. My question is....can I use a RS422 mini-din 8pin serial >>>to USB adapter converter, and will the OS and Logic recognize it. Any help would be greatly appreciated.
Thanks.
John Bennett
Logic Pro 8, MacPro 8 core Xeon, M-Audio ProFire 2626.

The problem is not the reliability of the adapter (they're just fine), but that the Midi driver doesn't look for such an adapter. It won't work. The only chance to get your interface to work is to buy one of the emagic interfaces that came with both USB and RS port and to chain them up.
Cheers,
Jazz

Alesis Midi Controller Keyboard setup with Logic Pro 8

Hi, just wondering if anyone can help me... I'm a complete newbie!
Recently bought a Macbook with Logic Pro 8 and would like to get set up for some home recording. The keyboard I want to use as a midi controller is the Alesis QS6 which has been in the wardrobe for some time. I have a Midiman USB midi interface.
When I connect it all up, I can't get it to make any sounds from Logic, only from the keyboard itself, which I don't want. A friend suggested taking out one of the midi cables so now I have only Midi out from the keyboard running into Midi in on the Midiman. When I play the keyboard the notes register on the Transport bar and I can even record them but I cannot hear anything.
Can anyone tell me what settings I need to have on the Alesis? Should the Keyboard Mode be on Normal, CH Solo or Out 1,2,3...16? I read somewhere I need to turn General Midi off, does this sound right? Is it something to do with midi channels - I don't even know how to tell which midi channel is selected in Logic.
If anyone has experience with using the QS6 with Logic I would love to hear from you!!!
Thanks!

Run the Audio/MIDI Setup utility. Is your keyboard/MIDI interface displayed in there?
If not, OSX does not see your MIDI device. Install it's drivers if it has them. If it doesn't have any drivers, your MIDI config might have got hosed. What keyboard is it?
Unplug and replug it, directly, don't use a hub. Does it show up in the AMS utility now? Try powering it for an adapter, not from USB.
If you still get no joy, I'll give you some procedures to try...

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Audio/MIDI Interface Compatibility with Logic Pro 7.2

Hello,
Is/are there a recommended audio/midi interface(s) that will work without audio/midi timing glitches with Logic Pro 7.2? Currently, I am using Pro Tools LE v7.1, along with the DIGI002 Rack. That combination works very well, with no glitches whatsover. The possibility of using Logic Pro 7.2 raises the question of what would be a compatible interface. I don't think the DIGI002 Rack has the necessary drivers, although I may be mistaken. However, there must be an interface that works well with Logic Pro 7.2.
Any help or advice would be much appreciated.
Thank you,
TonyVT
iMac Intel Dual Core Mac OS X (10.4.6)

Hello,
I went to the Metric Halo Web site and was not able to find the interface that you may have been referring to. It looks like the Mobile I/O may be the correct one, however, that interface is much more than I would want to spend (http://www.mhlabs.com/metric_halo/products/mio/)
The price seems to be @ $1200. Anyway, I am somewhat confused regarding the Metric Halo.
Any additional advice/help would be appreciated.
Thank you,
Tony Ventura
www.tonyventura.com
iMac Intel Dual Core Mac OS X (10.4.6)

01v96i Yamaha...will it work with logic pro X

I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Will the Tascam FW-1884 work with Logic Pro X?

Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford Rome

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
Thanks

it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
Best
Steve

Do you know if the Digidesign 192 will work with Logic Pro X?

Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

Hi Jacub,
I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
http://us.focusrite.com/downloads?product=iTrack+Solo
Please contact Focusrite support if you have any more concerns.
Best Regards,

Will a Mackie Control Universal V.2.1.2 work with Logic Pro 9?

Will a Mackie Universal Controller V. 1.2.1 work with Logic Pro 9?

Mine does. There was something If I can remember how to do it about after the update selecting the controller to mackie controller. You have the option within the controller itself to be mackie controller or logic controller. If it powers up and says mackie controller, You should be fine. If you have a problem get back to me, Ill look for the link that tells you how to change it.

Garagekey USB keyboard works with MacBook Pro, but not with 27" iMac

Just got a brandnew 27" iMac. The Garagekey USB keyboard doesn't work. It's recognized in systemProfiler, Audio-Midi Setup, GarageBand and Logic. But no Midi is coming in. When I plug it into my MacBook Pro, it works immediately. I know the Garagekey doesn't work with some 3rd party USB hubs, maybe for lack of enough power, but it works always at the internal USB hubs with the MacBook Pro. Why doesn't it with the 27" iMac? I'm cueless...
The IMac Systemprofiler says: Current Available (mA) 500, Current Required (mA) 300. So I guess, it can't be a power problem?

Have the same problem with Logic Pro. Works on my old Mac Mini but not on the new iMac 27" i5. Apple told me that it is a difference between the boards they used on the two computers. They said that even if I got a new mac mini I would run into the same problem. they recommended that I upgrade my mini, or try another piece of hardware to connect the two. Looking for hardware now. Good luck to you.

Does Emagic's AMT (Active Midi Transmission) work with Logic 8?

Is Logic 8 able to utilize Emagic's AMT (Active Midi Transmission) technology as used by it's Unitor 8 & AMT8 midi interfaces? (Similar to Digidesign's Midi Time-Stamping)

it was shown before( as unitor 8 though) but not anymore.
Ok, so it's not installed, and your computer doesn't know about it.
rescan midi doesn't find anything more,
No it won't. OSX can only communicate with an interface through a driver. No driver, no interface.
read somewhere that AMT 8 is not compatible with logic pro, which is odd.
Absolutely incorrect. And mine is working fine with all Logic versions, thank you very much!
Ok, trash you MIDI driver, which should be at:
/Library/Audio/MIDI Drivers/ EmagicUSBMIDIDriver.plugin
Also trash
/Users/you*/Library/Preferences/ByHost/com.apple.MIDI.
/Users/you/Library/Preferences/com.apple.audio.AudioMIDISetup.plist
Reboot. Reinstall the Emagic MIDI drivers from your Logic or GB installer. Reboot.
Check the AMT now shows up in the Audio MIDI Setup utility. If it does, you should be good to go.
Edit: Oh, before you do all that, check that the USB cable hasn't just fallen out..!

M-audio stops working with Logic Pro as soon as I hit play

I've not found a solution to this anywhere. I've got Logic Pro 9 and hooked up a M-Audio Oxygen 49. The computer and software see the Oxygen okay and I can play any sound I want through the software. Until I hit play - trying to add a track to a recorded song - and the led indicator makes some strange outputs and goes black and freezes. The only way to get it back on is to restart LP. Anyone else have this problem or know what could be causing it? Thanks.

dbaile wrote:
How do I check if the tracks are sending MIDI to the Oxygen? I'm pretty sure that's what's going on but don't know how to stop it. Thanks much.
Have you first tried the test I suggested.
A test... go to the upper left MENU in Logic, select Preferences/Control Surfaces/Bypass All Control Surfaces
Quit Logic, turn the Oxygen Off ot unplug the USB cable, restart the Mac, let it settle a minute, power on the Oxygen, wait 30 seconds and then start Logic. If the Oxygen seems to be working ok then it's control surface related.
Using the Inspector on the right hand side you cab see where the track is sending it's output. MIDI could only be sent to the Oxygen from an Internal MIDI track or an Environment Object with it's output set to the Oxygen IN.
Sounds like a control surface thing to me.
Go to that menu selection I described above and select "Rebuild Defaults"
Then Test
If No change select "Bypass All Control Surfaces"
Test

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

Which MIDI keyboards work with Logic Pro x and Yosimite?

Similar Messages

Maybe you are looking for