Which model should I use for Multimedia purposes? (Multimedia major in need of help deciding which model is the best for me.)

Multimedia major looking for a model in Apple that is best for me. Any advice is welcome.

Hi
1)you need to check the requiered characteristics are available or not from these data sources which supply data to the above said cubes,,2
2)0CCA_C11
3)0IC_C03
You cann't get the inventory report from the purchasing data(purchasing data always talks about the vendor supplying inventory,it never talks about the production inventory)
Hope it helps
Thanks
Teja

Similar Messages

  • HT4839 Which apn setting should I use for my iphone 4 on net10

    Which apn setting should I use for iphone 4 on net10

    APN Settings for Net 10
    Cellular Data
    APN: att.mvno
    Username: (Blank)
    Password:(Blank)
    MMS (Blank)
    APN: att.mvno
    Username: (Blank)
    Password: (Blank)
    MMSC: http://mmsc.cingular.com
    MMS Proxy: 66.209.11.33
    MMS Max Size: 1048576
    MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
    Type exactly whats on here on your settings.
    Procedure:
    1- Turn on your phone
    2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
    3. Goto Settings>General>Cellular>Cellular Network
    At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
    4. Get your paperclip take out the tray put in the Net 10 sim card
    5. Goto Cellular>Cellular Network while it's searching for service
    6. Type in your settings that I list above
    7. Scroll back to your main setting (Do not press your Home Button)
    8. Once you see your service up and running try out your web and send a picture message it should work.
    9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
    10. Do the process all over again
    Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

  • Which kernel module should I use for Marvell Yukon 88E8001?

    Which kernel module should I use for Marvell Yukon 88E8001?
    a. sky2
    b. skge
    c. sk98lin

    I found this in the kernel''s /driver/net/Kconfig:
    config SKGE
    tristate "New SysKonnect GigaEthernet support"
    depends on PCI
    select CRC32
    ---help---
    This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
    and related Gigabit Ethernet adapters. It is a new smaller driver
    with better performance and more complete ethtool support.
    It does not support the link failover and network management
    features that "portable" vendor supplied sk98lin driver does.
    This driver supports adapters based on the original Yukon chipset:
    Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
    Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
    It does not support the newer Yukon2 chipset: a separate driver,
    sky2, is provided for Yukon2-based adapters.
    To compile this driver as a module, choose M here: the module
    will be called skge. This is recommended.
    Looks like your module is "skge"

  • HT3669 which driver should i use for the epson LX300 matrix-dot printer??

    which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
    I bought an i mac not so long ago, can anyone help me about this?

    i use parallels desktop 7 because i use a program for work with windows XP. Is there really no solution?

  • Which jdbc driver should be used for sqlserver 2000 and where to put it.

    hi all,
    My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
    The questions are:
    1. which jdbc driver should be used for sqlserver 2000?
    2. which folder to put it in?
    3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
    failed tries:
    i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
    1. .../oracledi/drivers, and set this path to CLASSPATH.
    2. .../oracledi/userlib didn't exist, i created it and put the driver in.
    3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
    All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
    my environment is:
    os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
    ODI: 11g, installed in /users/oracle/odi/
    please help me,thanks a lot.
    jun
    帖子经 Jun编辑过

    Hi,
    You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
    What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
    Drivers folder in ODI 11g is under
    C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
    if you are using the standolone version
    On windwos :
    C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
    on linux
    $HOME/.odi/oracledi/userlib
    Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
    Thanks,
    Sutirtha

  • Any Idea Which Message type/Idoc Type should be used for FI Invoice

    Hi Experts,
    Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
    Thanks,
    Sony

    Hi Sony,
    I never dealt with FI IDoc.
    I think you need to setup EDI outgoing payment in IMG. Please take look this report <b>RFFOALE1</b> - ALE Distribution of Payment Data and <b>RFFOEDI1</b> and check also the program documentation.
    Hope this will help.
    Regards,
    Ferry Lianto

  • I am considering getting an iphone...  Which model is the best for me to get?

    I am considering getting an iphone... I do not care about getting the "latest gadget", but have all apple products and would love the convenience of the calendar, music, camera, etc... on my phone. Which model is the best for me to get?
    Is it really worth it for the newest (and most expensive) model, or is the 3G sufficient for regular use? or is the 4 now the most basic model I should invest in? or do I really have to get the 4S?

    tonefox wrote:
    One wonders why you are hanging around Apple forums...
    Many have wondered before, even I, yet in the end I settled for a reason... "unbiased help":
    iPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

  • What setting should I use for Abbey Road drums?  Getting a cpu overload issue

    What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)?  Getting a cpu overload issue.  I have a macbook pro, 4 gb ram, running Logic Pro 9.  Just 3 tracks of drums and a few real instrument tracks.  Can't find a guide in the manual for either Kontakt or Logic.  Thanks in advance!

    Hi
    AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
    See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
    Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
    CCT

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

  • What t_code should be used for migration?

    Hello there,
    our user wants to  migrate  "output vat" account after being audited.
    actually , they start using SAP from 1st. January.2009 but now needs to migrate for reconciliation purpose.
    Journal should be 40) output VAT   /      50) Beginning Balance-BS.
    Since this output VAT does not need any tax code and base amount, i think normal FI transaction like F-02 is not an answer.
    Furthermore, LSMW is not strongly recommended at this time, considering line item to be created.
    Could you let me know what t_code should be used for this case?
    BR.
    J.
    Edited by: Jimmy Choi on Jun 30, 2009 5:41 PM

    Hi
    Note down the G/L accounts you are posting.
    Option 1 :In OBD4 see the account group. change the tax category mandatory to optional field for running the lsmw. afte completion, set the status as earlier.
    Option 2: goto fs00-> see the field status group.-> double click on the FSG-> see the taxes -> make the fields optional.
    with regards
    siva
    Edited by: Siva Rama Krishna Yanamandra on Jul 2, 2009 1:12 AM

  • What pdf tag should I use for footnotes?

    I get involved in generating fully accessible tagged pdf's for asisstive technologies and the like. I have a doc in InDesign which uses footnotes. When I tag the document, should I map the footnotes (paragraph) style to a particular predefined pdf tag (http://www.alistapart.com/d/pdf_accessibility/PDFtags.html) and if so which one? P, STORY, NOTE....? I'm not sure and can't find any reference out there to help me.

    offtheroad wrote:
    What instrument area should I use for pulling in iTunes files to edit together, Voice, guitar, ...
    drop the files into a blank area of the timeline and GB will create a track for the files. if you want to do it manually, create a New Basic Track

  • What format should I use for new  FCP slide show to DVD project?

    I want to edit a slide show movie. I have all of the high resolution images. I plan on authoring the project to DVD 16:9 anamorphic with DVD SP. Later I would like to author to 1920 x 1080 HD on Blu-Ray. ( I can't afford Adobe BR authoring software at this time, I want to start with the DVD) I am looking for advice. I want the quality of DVD and future Blu-Ray to be best possible quality. I'm thinking there are two options I might use:
    1. Edit the FCP project in HD 1920 x 1080. Use Compressor to convert the sequence to 16:9 anamorphic for DVD SP input. I am thinking I will have the HD sequence ready for the Blu Ray in the future. I like this approach. Is the conversion possible with compressor? What exact format and frame rate should I use for the FCP project?
    2. Edit the FCP project in 16:9 Anamorphic. Compress for DVD SP input. I am not fond of this option. I don't look forward to making rectangular pixel images in Photoshop for one. That will be a lot of work for this project. I won't have an HD sequence ready for Blu Ray in future, I will have to start a new project from scratch to make the HD version.
    Thanks in advance for any advice!

    Edit in a 1920x1080/30p Pro Res sequence settings.
    Export that to a self contained movie current settings, and use which ever SD DVD preset to encode for use in DVD SP.
    The self contained movie can eventually be used in Adobe Encore for blu ray authoring.
    But having "high resolution" images/photos means nothing in video.
    1 dpi is sufficient at 1920x1080 unless you plan to pan and zoom, in which case double the pixel size, not the dpi.
    300 dpi produces no better image than 1 dpi.

  • What sequence setting should I use for a High Quality Video Montage?

    I am about to start a new project for a client using photographs only.  I have two questions:
    1.  What should I use for the sequence settings?  Should I edit with a HD sequence setting? 
    2.  I am going to scan the pics myself.  What Pixel or resolution is appropriate to get the best quality?  I'm looking for wide screen 16 x 9, not 3 x 4.

    First, decde how you are going to deliver this production to your client. Then tell us what that delivery medium will be. Then we'll have some advice for you.
    See the section in the FCP manual on using still images. You need to understand that in video there are only pixels, no dots per inch or lines per inch. Those terms are meaningless in video. You wil sand at a size in raw pixels that is only slightly larger than your delivery format.
    bogiesan

  • What are the logical database source (SQVI) should i use for quick viewer

    Dear expert,
    Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of   and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Please help.
    Many Thanks.
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
    How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
    Between,do you have any reference/link/document on the how to use the SQV1?
    Also, what the difference between SQV1 and SQ01 ?
    And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer  to generate the query?
    Please help.
    Many thanks.
    KH

  • HT3258 I have Snow Leopard 10.6.8 installed. For me to use XCode 4.5, I must have 10.7 or later. What is the best way to go ahead? Should I install OS X Lion and then move to Mountain Lion, or can I straight away install latest Mountain Lion, i.e. 10.8.2

    I have Snow Leopard 10.6.8 installed. For me to use XCode 4.5, I must have 10.7 or later. What is the best way to go ahead? Should I install OS X Lion and then move to Mountain Lion, or can I straight away install latest Mountain Lion, i.e. 10.8.2

    You can directly install Mountain Lion 10.8.0 to 10.6.8, and then apply the 10.8.2 Update.
    Hope this helps

Maybe you are looking for