Which module do I choose for reading voltages

Hi All,
Could someone give me some advice in there opinion on which SCXI
voltage module to choose please.
I want to log analog voltages ranging from the low mvolts to volts.
I'm looking at between the SCXI-1100, the SCXI-1102 and the
SCXI-1102B/C. Could someone also explain the filtering rate as well,
what effect this has on the signal etc.
Thanks in advance
Nat

Hi Natalie,
I know this is not the answer you are looking for, but probably, the best solution is to call your local NI Field/Sales Engineer and explain him/her what you are trying to do. Also, it will be easier to disscuss price, performance and other parameters that must be considered when taking such a decision.(usually, his/her e-mail/phone is in the bottom-left page corner when logging to "MyNI" account)
Good Luck

Similar Messages

After completed as an MBA HR & System, Which module is the best for freshers ??

Hi, I am Samrat Saha. I completed my post graduation as an MBA (HR&System). I did BCA in my graduation and did Higher secondary in commerce. I want to build my career in SAP. But I have some questions::
1. If i go for SAP then which module is the best for me..??
2. As a fresher is companies showing any interest to recruit..??
3. I hard a Course from Victoria University, Melborn, That Is "Master of Business (Enterprise Resource planning System) with SAP".. Is this Master degree worthy to do??
Message was edited by: Sarah Kellman

Hello Samrat,
It is not possible to provide guidance on what career path you should take. This is a conversation you need to have with a Career Planner or perhaps one of your professors. You should follow the path you are most interested in, be it a functional role or a technical role. Ideally you may want to consider getting some work experience in both fields, and then determine which area you wish to pursue.
You state you have an MBA in HR & System....System what?? System development? Technology? Programming? Data Warehousing? Even HR is a vast area within the SAP world. We have Payroll, Recruiting, Self Services, Compensation, Time Management, Learning Management Systems, etc. Most consultants select one or two areas to pursue. There is no such thing as a single person who knows the complete SAP HR solution...it's just too big!
I will suggest that you consider taking an SAP HR course so that you can get an idea as to how large the application is. There are lots of courses available in e-learning. I would recommend either SAPHRE or HR050E to start. Once you have completed one of these, you'll be in a better position to decide what you want to do, or at least decide what you don't want to do.
Good Luck!

Which EAP Type to choose for 802.1x Wireless Policy?

Hi everyone,
i have a question about recommendation for EAP Type in a wireless policy:
Which configuration is more secure/recommendet?
a)
Authentication Type: PEAP
EAP Type: EAP-MSCHAP v2
b)
Authentication Type: EAP
EAP Type: Certificate
We have a working configuration with a) and could Change to b).
Thanks,
Andy

Hi,
Project a uses PEAP cooperate with EAP(EAP-MSCHAP v2) is more security/recommended.
PEAP is a new member of the family of EAP protocols. To enhance both the EAP protocols and network security, PEAP provides:
1. Protection for the EAP method negotiation that occurs between client and server through a TLS channel. This helps prevent an attacker from injecting packets between the client and the network access server (NAS) to cause the negotiation of a less secure
EAP method. The encrypted TLS channel also helps prevent denial of service attacks against the IAS server.
2. Support for the fragmentation and reassembly of messages, allowing the use of EAP types that do not provide this.
3. Wireless clients with the ability to authenticate the IAS or RADIUS server. Because the server also authenticates the client, mutual authentication occurs.
4. Protection against the deployment of an unauthorized wireless access point (WAP) when the EAP client authenticates the certificate provided by the IAS server. In addition, the TLS master secret created by the PEAP authenticator and client is not shared
with the access point. Because of this, the access point cannot decrypt the messages protected by PEAP.
5. PEAP fast reconnect, which reduces the delay in time between an authentication request by a client and the response by the IAS or RADIUS server, and allows wireless clients to move between access points without repeated requests for authentication.
This reduces resource requirements for both client and server.
You can choose between two EAP types for use with PEAP: EAP-MS-CHAPv2 or EAP-TLS. EAP-MS-CHAPv2 uses credentials (user name and password) for user authentication. EAP-TLS uses either certificates installed in the client computer certificate store or a smart
card for user and client computer authentication. Comparatively, the second one is more security because public Key certificates provide a much stronger authentication method than those that use password-based credentials.
Best Regards,
Eve Wang

Looking for advice on what which freamework or dev. methodology for read only database centric web application

Hello, I hope the experts here can advise me on which development approach for a new .net web application that I am to begin development shortly. I have the back end stored procedures complete and now I will build a .net front end.
This front end will be 95% populating custom html5/css3/jquery pages from c# DataSets which are themselves populated from calls to oracle stored procesures. There will be no updating - this is read-only querries of OLTP prpared tables off of a data
warehouse schema. I am a verteran at the back end stuff but my web app development skills are new so I hope to get a recommendation form the experts on what approach I should persue to build the front end. From what I have seen I might start
with MVC5 framework and build the web pages with RAZOR embedded c# code looping through the DataSets to create the html. I need to the ability to create very custom div elements throughout, so I understand I should not use some high level code generation
tool. Thanks so much for the feedback.

Hello Jay,
This forum is discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
>>I hope the experts here can advise me on which development approach for a new .net web application.
From this message, you are doing web applications, you will need to post this thread to Asp.Net forum for some advices. For MVC issues, please post
Here. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Which address format to choose for Chinese addresses?

Hi;
In Addressbook, I'm trying to enter a Chinese address. I'm standing in Beijing, can't get more Chinese than this.
A Chinese address looks like this:
中国北京市东城区东中街20号3号楼1311 100022
Chinese addresses go from country (中国) first to apartment number (1311) in a single stream, with the postal code last for sorting.
This has nothing to do with the Address format when I choose "China" under "Change Address Format". Is there another "China" that I should select?
Any help would be appreciated -- I'd like to preserve as much of the chinese characters and formatting as I can.
Additionally, if I can manually create a format that goes:
Country-Province-City-District-address postal
... then I'd at least preserve the chinese formatting.
Thanks...
Allan
Powerbook G4 Mac OS X (10.4.8) Addressbook 4.0.4 (485.1)

FAT is FAT32 is MSDOS
exFAT is FATex
Disk Utility select second drive media
Hit the partition tap, select big box click 2 partitions,
select 1 partition format OS X extended, select the other partition format MSDOS click Apply.
https://discussions.apple.com/message/16276201#16276201
Because you have a unusual setup, I don't know exactly how Bootcamp is going to handle it, you got to download the drivers and read the PDF.
However when you insert the Windows 7 DVD to install, you first need to change the MSDOS/FAT32 format to NTFS using the Windows disk, Disk Utility or Bootcamp won't do it.
https://www.apple.com/support/bootcamp/

Trying to check in to airline. Says I need a flashplayer. Which one do I choose for iPad

I am trying to check in online for airline boarding pass. Says I need a flash player which is not supported by iPad. Is there an app I can get to install flash player?

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

Which ODBC driver to choose for a multi version , multi home installation

I have a situation where I need to rollout a piece of software which connects to an Oracle 64 bit database. The client group that I need to rollout to includes a combination of Oracle8, Oracle 9 and Oracle 10. Some installations have dual 8/9 Homes and I am sure that there are other combinations.
The software connects through either a normal oracle connection or can connect through ODBC. However, the normal connection software will not connect through Oracle below Oracle 9, So I am left with an ODBC driver. I am using the microsoft driver currently - it is very slow, but it is at least already installed on all the user pc's. However I believe that it does not work with dual homes.
Is there an Oracle driver that would meet our needs?, i.e allow connections from version 8 to 10 with any combination of homes.

You're right that the Microsoft ODBC driver for Oracle doesn't support multiple Oracle Homes. It also isn't updated regularly, so it doesn't support a lot of functionality that was added in Oracle 9 or 10.
Exactly what versions of Oracle does "Oracle8" comprise. There is a world of difference between having some 8.1.7 databases still in prod and having some ancient 8.0.4 databases around. Depending on the "Oracle8" variants in the world, you should be able to use either the 8.1.7.x or 9.2.0.x Oracle ODBC driver should work for you. You'll need to install an appropriate Oracle Home for that driver (i.e. the machine will have to have an 8.1.7 Oracle Home if you're going to use the 8.1.7.x Oracle ODBC driver, it'll need a 9.2 Oracle Home if you're going to use the 9.2.0.x Oracle ODBC driver). Since 8.1.7 has been desupported, I'm hopeful that you can use the 9.2.0.x Oracle ODBC driver since Oracle 9.2 will at least be supported a few more months.
Justin

Which wifi adaptor to choose for T410s?

Hello,
I am now ordering a new T410s and I don't know what the real (not on paper) difference is between these four choices:
ThinkPad b/g/n
Intel Centrino Advanced-N 6200 (2X2 AGN) [add $20.00]
Intel Centrino Ultimate-N 6300 (3X3 AGN) [add $40.00]
Intel Centrino Advanced-N + WiMAX 6250 [add $55.00]
Is it worth it for me to pay some extra $20 or $40? Theoretically these adapters can work faster when plugged into a fast network, but doesn't it ultimately depend on the internet provider? and is there a real-life difference between these? I use comcast at home but I take my laptop to university where I work everyday. The university has an all-campus coverage but for some reason i get a very weak signal in my office. Would the 6200 help me solve this issue? Is it worth the money? Thank you,
Christina

Two high end manufacturers that haven't been mentioned, Metric Halo and RME:
http://mhsecure.com/metric_halo/products/hardware/uln-2.html
http://www.rme-audio.de/en_index.php

How to update Phoshop cs4 to cs5 when adobe updater is lost? Which module should I download for Mac OS X 10.6.8?

Please let me know how to update Photoshop cs4 to cs5 or cs 6 when adobe updater is no longer available? platform Mac OS X version 10.6.8
Thank you.
Regards

If you mean you wish to purchase CS5 as an upgrade for CS4, Adobe no longer sells CS5. You can purchase CS6, but not likely as an upgrade however because for many CS6 products they require CS5 or newer to qualify for an upgrade purchase of CS6. Here is a link where you can check if the software you want is available as a CS6 upgrade for CS4....
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

How Can I configure the 6024E board for reading the voltage from a source?

Hi, I have a little problem, I want to use the 6024E board for reading voltage from a source and then display this on the monitor, and also I want to change the voltage from the output using the computer. I read the manual but I don't understand how to connect and configure the board. It is to proof that the board receive and send information.
Thanks, sorry for my english, I'm from Mexico, if you don't understand something about my explanation tell me.

Thank you, now I'm trying to do my project and I have another question, there are differents ways to connect the source and I choose the NRSE configuration because I'm going to use a grounded signal source... well in the manual says "The signal is then connected to the positive input of the PGIA, and the signal local ground reference is conenected to the negative input ot the PGIA. The ground point of the signal should, therefore, be connected to the AISENSE pin." I don't understand this because I only have two wires and here is talking about three connections, please help me, how do I connect the source to the board? I have the positive wire and the negative wire.... maybe is because I don't have a perfect english and I don't understand the sentence...

Which SAP Module I should go for

Hi All,
I compltely new to the SAP.I have around 3 year experience in BI(DWH,ETL),Java .I have some good package as well
Due to some personal reason I wanted to shift to my native where we dont have any software companies but we have so many steel as well power plant like Bhilai Steel ,Jindel Steel Plant.
Can any one can suggest Which Module I should go for which can provide me job in steel or power plant.
I was thinking to learn SAP BI( from authorised centers) which suits my profile as well.
Thanks
Ashish

Hi
I am also B.Com graduate and I have been working as SD consultant from last 5 years. With your degree you can go for any functional module. SD FI MM are best possible combination but I have seen people who have B.Com or MBA degree but they are working as PP PM or even BI/BO consultans. Its all depends on your personal interest and your area of expertise. In most of the cases degree has nothing to do with module selection in my point of view.
Thank$

Want to learn SAP - which module should opt for...

one of my friend is in to Retail domain..non SAP Domain working with one retail channel as a store manager. ...Wants to learn SAP....which module should he go for..SD / CRM / or direct IS_Retail certification...as a fresher where he will be able to get chance...???
i am working as a SAP Recruiter in some company..so i am aware that there is not much demand for fresher in this industry..
please guide...

Plenty of information about Retail education on <a href="https://websmp104.sap-ag.de/RETAIL">Service Marketplace - Retail</a> where you will find course descriptions. For example:
This curriculum comprises an Overview Course (Level 2), which explains the main retailing processes in SAP for Retail, plus seven Detailed Courses (Level 3), which examine specific retailing processes and how these are mapped and controlled in SAP for Retail.
The Overview Course IRT100 (Retail Process Overview) explains the core processes of a retailing company. Based on a scenario in which merchandise is sold from stores, the course demonstrates how the store and distribution center are supplied with goods. Further process examples are the special cases of promotions and return of merchandise.

What SAP module is more appropriate for my background?

HI,
I'm very interested to join a SAP course in India but i'm really not making any decision so far. which module is more suitable for me and my background.
I have done my Master in "computer science" and my undergrad in "Education in computer". I've asked some guys and some have advised me to go for Basis or BI. I'm telling you that I have no experience in SAP world but I'll take a step further to join the most appropriate course that meets my background.
my Questions are:
- Any requirements to study SAP Basis/BI module in an authorized institute?
- What do u suggest me to study?
plz share your experience :):):)

BTW, I'd like to get some advices about my situation:
i'm interested to enter into SAP world but i duno which way is more appropriate for me:
1- join a course in a non-authorized institute in India for about 2 months (2 h/day) then join SIEMENS institute (8 h/day) which is authorized then do the exam to be a SAP certified consultant. [a long way, total of studying is 3 months, will cost a bit more]
2- join a course in SIEMENS institute then do the exam to be a SAP certified consultant. [short period .. just 1 month, intensive]
Things to bear in mind:
- no experience in SAP world.
- the aim of studying in a non-authorized institute is to enter into SAP world and make sure if the module is suitable for u or need to switch to another one. studying in a non-institute is a bit cheap.
what do u recommend me to do?
cheers,

Which module is the best

hi i am working in some mnc but i have the doubt in my future i am working as a sap fico consultant but i want to update my studies in sap which module is the best for my future i have 3 years of sap experience in sap fico only thats why i am asking which module is the best bi,bw,tresurry,pm or any other please suggest me
Moderator: The best would be respecting the rules of SDN forum

Hello Samrat,
It is not possible to provide guidance on what career path you should take. This is a conversation you need to have with a Career Planner or perhaps one of your professors. You should follow the path you are most interested in, be it a functional role or a technical role. Ideally you may want to consider getting some work experience in both fields, and then determine which area you wish to pursue.
You state you have an MBA in HR & System....System what?? System development? Technology? Programming? Data Warehousing? Even HR is a vast area within the SAP world. We have Payroll, Recruiting, Self Services, Compensation, Time Management, Learning Management Systems, etc. Most consultants select one or two areas to pursue. There is no such thing as a single person who knows the complete SAP HR solution...it's just too big!
I will suggest that you consider taking an SAP HR course so that you can get an idea as to how large the application is. There are lots of courses available in e-learning. I would recommend either SAPHRE or HR050E to start. Once you have completed one of these, you'll be in a better position to decide what you want to do, or at least decide what you don't want to do.
Good Luck!

Which Module to chose from MM & PP

Hi Friends,
I am a Mechanical Engineer with a total of 3.5 years of experience in FMCG(Manufacturing industry) and I am interested in pursuing my career in SAP .
I got to know that there is two SAP modules likely MM and PP for people who come from a background of Manufacturing sector, So I am in dilemma now to chose between MM and PP .
Can you guys please help me in understanding
               -->Which Module would be apt for my experience
               -->What will be the Job opportunities for me( as I will be fresher in SAP field)
               -->What are the best institutions in Hyderabad to learn SAP
I appreciate your help .
Thanks,
Ajay Kumar

My recommendation is to add the 9234 module to your cDAQ chassis. It has four channels and powers microphones, such as the ones from GRAS, http://www.gras.dk/00012/00013/00016/
The phase difference between two of the array microphones will tell you the direction of the sounds. Simultaneous sampling of the 9234 module will give you the accuracy in the phase measurements you need.
Here is an example from one of our alliance paartners:
http://zone.ni.com/devzone/cda/tut/p/id/6240
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Which module do I choose for reading voltages

Similar Messages

Maybe you are looking for