Which MSS for erp2005 and Portal 7

This isn't as silly a question as it seems - honest
Our system is ERP 2005 and Portal 7.
According to the Portal Content Portfolio there is a Business Packagefor Manager Self-service (mySAP ERP) which is version 1.0 but has the following in the document
Primary Backend System SAP - ERP 2005
Portal Release NetWeaver 2004s (SP Stack 05 and higher)
Which fits us nicely. The size of the 4 .sca files are roughly 1 meg.
I loaded them but they didn't work
I also loade PCUI and the common parts business package.
Then upon investigation on service.sap.com/patches I find following the path
SAP Application Components -> SAP ERP -> SAP ERP 2005 -
> Entry by Component -> SAP XSS (Self Services)-> MSS600
Notice the different version number and the size of the 4 .sca files here are roughly 57meg.
Can anyone explain what the difference is between these to versions of MSS? Both are for ERP 2005?
When would you use one and not the other?
By default I usually get the ones from the Portal Content Portfolio (as I did on this occasion).
The same scenario is true also for ESS.
Can anyone explain this.
Thanks

Pls note an answer from SAP..
Business Package for Common Parts (mySAP ERP) 1.0
Business Package MSS (mySAP ERP) 1.0
You may downlaod them in the Service Marketplace or in the SDN.
Please find the version for the webdynpro applications below:
SAP MSS 600
SAP PCUI_GP 600 (People Centric User Interface Generic Parts)
You can download this in the Service Marketplace only and not in the
SDN.

Similar Messages

Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.

HI ALL,
i need documents on Implementation guide for ESS/MSS. Urgent for ECC6 and Portal 7.
Thanks in advance.

Hi
Please go through the link in the below thread.
/message/3262434#3262434 [original link is broken]
Also try this ESS - 4.6C version to gain some knowledge:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
If this helps, pl do reward.
Thanks
Narasimha

Some of my earliest photos are not showing on my phone after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I can not find an album for photos before 2012.

Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

OEM for MetaSolv and Portal (Billing)

Hello,
A question from the partner: any plan to have OEM on MetaSolv and Portal (Billing) which Oracle acquired recently?
Best regards,
Michael

Hi Michael,
Yes OEM will be there for BRM.
Regards,
Sachidanand

Single directory Server for Messaging and Portal

We are trying to unify our directory services.
At present, there two directory servers, one for iPlanet messaging 5.2 and another for Portal server 6.0.
Messaging's Directory server is v5.1 and Portal's Directory server is v5.2. Their BaseDN is same.
Now, What we are planning to do is as below.
1. LDIF everything from Msgr Directory and import into Portal's Directory.
2. Point Msg Server to the Portal's directory.
But, we are not sure what to export or how to tell messaging server to look at the Portal's Directory. Any help will be greatly appreciated!!!
Thanks
Srini

What you are trying to do is non-trivial.
Setting the ldap server for user and groups on the mail server is easy enough -- look at the output of configutil and you will find the values of local.ugldap*
define the values you need to change.
e.g.:
local.ugldapbasedn
local.ugldapbindcred
local.ugldapbinddn
local.ugldaphost
local.ugldapport
etc.
These are all listed in the messaging reference manual.
You need to ensure that the schemas of the two apps. match. For example, if you are using schema 1 for mail and schema 2 for the portal (quite likely), there will be a lot more work to do on the directory than simply moving the user entries accross and merging them.
Unless you have done this sort of thing before, or feel very comfortable and knowlegable about how the messaging server in partuicular works with LDAP, I would suggest that you seriously consider getting help from Sun Professonal Services.

Username and password for AS and portal and wirless

Hi,
I am newbe to As.
what is the default username and password for the AS and portal and wirless and emconsole.
please help me out that
Edited by: user3266490 on Sep 3, 2009 6:26 PM

Hi,
thanks for reply.I changed ias_admin password by jazn-data.xml.but i could n't able to login as PORTAL USER.
i tired to login portal user with ias_Admin password but there is no gain
and also how to find the INTEGRATED EBS SUITE with Application server in application console.
Edited by: user3266490 on Sep 4, 2009 12:12 PM

Can i buy a lens which suits for portraits and macro photography?

I have a 600D canon.
I want to buy a lens that can work both for portraits and also for macro.Is it possible?
Budget is approx. 400 $. Max stretch to 600$
I was recommended 50 mm f1.8 for portraits.
Will it also work as a macro lens?
Solved!
Go to Solution.

Macro lens can be a wonderful portrait lens. I've used mostly macro lens for portrait. Like Skirball said, 100mm is long for indoor portrait.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

How authentication and authorization works in webdynpro for abap and portal

Hi Experts,
I have to create an webdynpro abap application for portal which will update the user information in the backend HR standard table.
The SSO (certificate)setup is already doen between portal and backend sap system . Do I need to pass the portal userID to the webDynpro ABAP application, via IView created to update the table. OR SSO will take care itself.
Thanks and regards,
Ajay

Dear Ajay
If SSO is configured as you have mentioned, then all is ok and you don't need do pass the user ID.
It will be done automatically.
Just try for yourself - create a simple WD ABAP and put it inside an iView.
Then have this WD to write the SY-UNAME on the screen.
That way you will confirm what I'm saying
Kind Regards
/Ricardo Quintas

Webdynpro for ABAP and Portal Integration

Hi Experts,
we created a WebDynpro for ABAP application for portal. The application will modify/update few fields in backend sap HR table PA0006 (infotype 6) . The end user (portal user) should be able to update his data in backend with the iview created on this application.
I have below two questions in my mind.
1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
Thanks
Ajay

1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
Answer: If you use, for exemple ITS to access this Webdympro, you will not need any action on portal for sure. Actually you will just need actions on portal, if you want to make some customization on portal side. If you want just show the Webdympro how it is, your action are all on backend..
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
If you access via ITS, te custome will acess the backend with the user you have set on the SSO or user-mapping. The portal there is nothing to do in this regards, you must just take care of this on backend.
Please evaluating the answer you are contributing for the SDN keep growing.
Edited by: Fabio Sarmento on Sep 19, 2011 2:41 PM

Which jinitiator for w98 and win xp ?

hi all ,
i am deplying my forms6i on the web using oracle9ias .
the application works fine with w98 client where in it does not seem to be working with winxp client.
i think there is problem with jinitiator.
can somebody tell me which version of oracle jinitiator will work with win xp ? and how to install it on client side automatically when the page gets loaded.
Also when forms are accessed for first time it starts installing jinitiator. over the network it takes long time,
can i manage this download manually ?
help will be really appreciated
thanks
chaiitalii

General Notes For Oracle JInitiator On Microsoft Windows XP:
Windows XP has 2 editions/versions, Professional and Home. Oracle will ONLY certify on Professional.
Oracle JInitiator :1.3.1.9
Oracle JInitiator :1.1.8.19

Which switch for POE and 7940G phones?

I have 2 (and maybe soon 5 more) 7940G phones to add to my network, which already has a Netgear POE capable switch. I've since discovered that early Cisco POE isn't the same thing as current POE, and the switch doesn't power the phones.
I was looking at adding a Cisco SD208P 8-port switch to power the phones, but I soon discovered it only has 4 POE ports, and I'm not sure that this switch will even power the 7940G phones. And if the other 5 phones show up, I'll need two of those switches with no room for expansion on the voice network.
Will this switch power those phones?
Is there another small switch available so I don't have to replace my existing switch infrastructure to get these phones to work? Or do I need to scrap the phones and get something newer that will work with the current POE standards?

Will,
I would look at the ESW520 8 port switch, it will power the phones and will have the "*" VLAN's already setup in them.
Side note "*": This assumes that you are using VLAN100 and Cisco Voice system for the switch
Have a great day

Which MPIO for EVA4400 and MSA P2000?

Hi everyone,
As the subject which MPIO can work for both EVA4400 and MSA P2000, the server's connecting to the both storage.
Thanks,

You may also want to post your question on the HP Business Support Forum -- HP StoreVirtual Storage section.
http://h30499.www3.hp.com/t5/HP-StoreVirtual-Storage-LeftHand/bd-p/itrc-1195#.U-TSY3l0y9I

Initializing HD, which format for mac and windows?

Hi,
I would like to initialize an external firewire HD to be able to use it on mac and pc.
Should I just choose the FAT format in disk utility?
Thanks!

this is about as good as I could find.
windows reads & writes ntfs, and fat32
os x reads and writes fat32 and mac os x extended.
os x can read ntfs (read only)
and fat32 can't handle large files or large disks.
spit it up and hope that no file is greater than 4gig
unless you can find the drivers for your xp or vista, you can't read a mac os x extended disk.

Which specs for FCP and which camcorder?

Hi guys,
will be using the macbook for editing gigs/events/music video's etc. what specs would be best?
and any thoughts on a camcorder? currently got my eye on sony hxr mc50e but wanting to know if you think any others are better?
defo needs to be HD, portable, SD preferred over MiniDV, Needs to have good low light recording and good audio. Max budget is about £1300
hope u can help
many thanks

If, despite all advice to the contrary, you still go for the MacBook Pro then I'd recommend the base 17” MacBook Pro (MBP) configuration, with 160GB 5400 RPM hard disc option, and an additional 1 GB RAM (to make 3 GB total).
Why the 17” model?
Because when editing you need as much screen space as possible. Yes, it is bigger and heavier than the 15”, but I think that it’s larger and higher resolution display is worth that sacrifice.
Why the bigger but slower 160GB 5400 RPM hard disc option?
Laptop drives already have a much smaller capacity than their desktop cousins and those little drives, inevitably, fill up quickly with all your stuff!
And of course, you're planning to get an external media drive too, right? If you don’t have one then your internal disc will be eaten up by clip media in no time (especially if you opted for the smaller faster internal disc).
Why 3 GB RAM?
Well OK, thats an expensive option, but seriously, if you can afford it the money is well spent.
I'd also strongly recommend the extended AppleCare Protection Plan.

Which tables for LO and FI...

Hi Gurus,
In LO from the Setup tables the data is transfered to the Delta Queue. Then how about in FI Extraction???
I will appreciate if you can show me the flow of data in LO and FI.
Thanks
NewBW

hope the below links are usefull:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Lo extraction

Which MSS for erp2005 and Portal 7

Similar Messages

Maybe you are looking for