Which mx4j version is supported by BlazeDS 3.2

I've a jetty started in a phoenix container which uses mx4j.server.MX4JMBeanServerBuilder (MX4J-Release: 3.0.2).
When I deploy BlazeDS war on this jetty, it gives me "java.lang.LinkageError". I guess some older version of mx4j is supported by BlazeDS. Here's the stack trace:
java.lang.LinkageError: Class javax/management/MBeanServer violates loader constraints
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:366)
    at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:337)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
    at java.lang.Class.getConstructor0(Class.java:2671)
    at java.lang.Class.newInstance0(Class.java:321)
    at java.lang.Class.newInstance(Class.java:303)
    at javax.management.MBeanServerFactory.newBuilder(MBeanServerFactory.java:456)
    at javax.management.MBeanServerFactory.checkMBeanServerBuilder(MBeanServerFactory.java:494)
    at javax.management.MBeanServerFactory.getNewMBeanServerBuilder(MBeanServerFactory.java:530)
    at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:304)
    at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:219)
    at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:180)
    at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:264)
    at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:512)
    at flex.management.PlatformMBeanServerLocator.getMBeanServer(PlatformMBeanServerLocator.java :45)
    at flex.management.BaseControl.register(BaseControl.java:179)
    at flex.management.runtime.AdminConsoleDisplayRegistrar.<init>(AdminConsoleDisplayRegistrar. java:19)
    at flex.management.runtime.messaging.MessageBrokerControl.<init>(MessageBrokerControl.java:8 5)
    at flex.messaging.MessageBroker.<init>(MessageBroker.java:196)
    at flex.messaging.config.MessagingConfiguration.createBroker(MessagingConfiguration.java:104 )
    at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:106)
Please help.
Thanks,
Faizan

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Similar Messages

  • Which XSLT versions are support by Oracle BPEL? v1.1  or v2.0?

    Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
    As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
    Is this true?
    If yes: Which XSLT functions of v2.0 are supported?
    Does it matter if I change the
    version="1.1"
    attribute in the topmost
    <xsl:stylesheet......>
    tag?
    Which XSLT processor is built-in/used?
    Peter

    XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

  • Which Vmware Version is supported by SAP HANA ???

    Hi SAP HANA Experts,
    We knew that now a days SAP HANA is supporting Vmware also to install it...
    Can anyone provide which Vmware version is supported by SAP HANA for PRD & NON PRD Setup's

    Hi,
    SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
    SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
    SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
    VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
    Thanks & Regards,
    Kumar

  • General availability of MDM GDS 2.1, which NetWeaver Version is supported?

    Hello Community,
    does anyone know when GDS 2.1 is general available and which Java NetWeaver Stack version will be supported?
    Kind Regards,
    Tobi

    Hi Tobi,
    GDS2.1 might will be GA around December 2010, but this is not official.
    Regards,
    Gabor

  • Which iOs version is supported?

    Hi
    I'm just wondering which version of iOs is supported by the 4.5SDK?
    Regards,
    Lars

    i think it comes out in June right now it is Android only someone correct me if i am wrong !

  • CS5.5 Air for iOs - Which iOs versions are supported?

    Hi everyone,
    I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
    Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
    Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
    Suggestions?
    Anyone tried on similar OS?
    Thanks a lot
    Iacopo

    Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
    Any news on this?
    Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

  • Which DAQmx Version is sutiable for Labview 8.2.1

    Hai Guys,
                  I am Thiyagu. I have one Doubt in DAQmx. If One year before my senior create One VI. The VI Labview Version 8.2.1. Lastweek running VI Harddisk was crased. I have only source code. I pasted that source code in another PC. I opened that source code It shows DAQmx Write file.VI was Missing. So  i searced Daq file and I find it. So i Pasted that Vi in Source code It shows Labview 11 error. Currnt labview Version is 8.6 and DAQ version 8.8. So kindly tell me How to slove this issue and Which DAQmx Version is suitable for 8.2.1
    Please do the needfull.
    Thanks
    Thanks
    Thiyagarajan.S
    WABCO Vehicle Control System

    Any DAQmx should work, I use the latest with LV7.1. You can download it from ni.com or use the CDs supplied with your hardware.
    The mistake you made was to copy the missing VIs. You need to run the DAQmx installer instead (after installing LV, so it can detect which LV versions to support).
    Felix 
    www.aescusoft.de
    My latest community nugget on producer/consumer design
    My current blog: A journey through uml

  • How to determine (in bulk) whether a document has OCR text and what reader versions are supported?

    Help!
    I've inherited a task which has spanned many years and which was not well thought out over the transitions.  At least three project teams have scanned and stored tens of thousands of documents to PDF.  What was discovered subsequently was that the project teams did not apply a uniform standard for which versions of Adobe would be supported in each PDF, and that not all documents appear to have been OCR'ed as part of the scan process.
    This has resulted in two major problems.  First, PDFs which support all Reader versions are bloated and consuming significant amounts of storage; second, the automated processing tools which depend upon the OCR text are failing once they pass the front and rear cover sheets (which do contain extractable text).  I need to know if there is a way that PDFs can be bulk scanned to determine which Reader versions are supported (say 8.0 to current), and if the OCR'ed / extractable text is not just limited to the first few and last pages of each PDF.
    I have been manually fixing individual files with Adobe Acrobat 9.0.  I can force Adobe to re-OCR and save the files, but I would rather not have to re-process the existing bulk that we have unless absolutely necessary.  If I could determine which ones need fixing and just processing those it will save man years of work.
    Thanks, in advance, for any assistance.
    Michael

    What I meant by supporting a version of Reader is that I don't need the files to be fully backwards compatible all the way back to say the first few versions of Adobe Reader.  (There are likely limitations on that much backwards compatibility, anyway.)  One of the scanners that was used apparently was set for full backwards compatibility, to the extent possible, for every PDF that it generated.  Some of those PDFs are huge, commonly 300-400MBs in size.  If I open them in Acrobat 9.0, limit the backwards compatibility to Adobe Reader 8.0 and forward, then resave the file, the size is often significantly reduced.
    As to how it is measured, there is something in the PDF itself that indicates a minimum version for Adobe Reader for compatibility purposes.  When you select for compatibility in Acrobat during the save process I mentioned, you get to pick the version at which you want to stop -- so if you selected 8.0, it would be compatible with 8.0, 9.0, and so on.

  • Google mail tells me that I have an outdated version of Firefox which it does not support. I have Firefox 8.0.1. Why is there a problem?

    Google mail tells me that I have an outdated version of Firefox which it does not support. I have Firefox 8.0.1. Why is there a problem? I am using OSX 7.2
    When trying to access the URL after startup or waking the computer, I get the following message
    sec_error_ocsp_server_error
    The I will get a message that my version of Firefox will not work with google mail.

    You can check the OCSP settings.
    *Firefox > Preferences > Advanced > Encryption: Certificates > Validation:
    *[X] "Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates"
    *[X] "Validate a certificate if it specifies an OCSP server"
    *[ ] "When an OCSP server connection fails, treat the certificate as invalid"

  • Which sql developer version will support oracle 8.1.7

    hi
    which sql developer version will support oracle 8.1.7 or is it necessary to use plsql developer to connect to database (oracle 8.1.7)

    Hi,
    SQL Developer version 1.2.1 is able to connect to 8.1.7 with limited functionality (prepared reports and browser for objects could not work)..
    Next version (tested with 3.2 64-bit) of SQL developer could be "hacked" to connect to 8.1.7 by simply copy file C:\oracle\product\10.2.0\client_1\jdbc\lib\classes12.zip from Oracle client prior 11
    into appropriate jdk\jre\lib\ext folder.

  • WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

    Hello,
    I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
    *TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
    *TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
    I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
    In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates  for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
    Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
    Regards

    Hello,
    I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
    Signature Algorithm: sha256WithRSAEncryption
    When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
    "We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
    I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
    Regards

  • Which IOS version supported EEM?

    Hi
    May I know which IOS version supported EEM (Embedded Event Manager) ?
    we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
    hugo

    EEM supported on 3750:-
    http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
    But as leo said its not on 2960.

  • Application Is Running On A Version of Adobe AIR Which Is No Longer Supported?

    "This application is running on a version of Adobe AIR which is no longer supported. Please install the latest version of Adobe AIR from..."
    This is the message I get when I try opening an F4V. file. I never had this issue in the past. I tried going to the website to update my version of Adobe AIR, and it says I cannot, since it's already up-to-date. Any thoughts would be greatly appreciated.
    Thanks.

    Do you have access to the problematic machine? If so, maybe you could try to install Sysinternal's Process Monitor http://technet.microsoft.com/en-us/sysinternals/bb896645
    Run the tool, create filter to see just events containing your app name and try to find in the result any issue... you could also compare the log with same log from not problematic machine or with app made with older SDK which was working.
    That's all what I can do... it's a shame that nobody from Adobe is interested yet... maybe you could also submit a bug.

  • Which axi version is the supported and compatible version for JDK1.4?

    Hi,
    Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance.
    Regards,
    Lokesh Kumar Pattajoshi

    Hi Jürgen
    Please be advised that the customer is correct.
    Please see the following note:
    539188 TREX installations for E-Selling
    For all E-Commerce and ICSS scenarios using
    SAP Web Application Server Java 6.40  TREX 6.1. is recommended.
    Hope this will be of assistance.
    Kind regards Peter
    Edited by: Peter Murphy on Jan 23, 2009 3:01 PM

  • Which mySAP version support Adobe 8.0 and IE7 to show PDF forms

    Hello,
    I would like to know what is the mySAP (HCM) version and support package level which supports using PDF forms if the Adobe Acrobat or Adobe Reader is 8.0 and if Internet Explore is version 7.
    We are trying to view (static forms so far) HCM related PDF documents by using PORTAL. The current version (SAP + plug-in) does not support Adobe 8.0 --> forms cannot be used.
    A promt answer is highly appreciated.
    BR,
    Pipsa

    Neha,
    Thanks for the response.
    We are running acroread headlessly since it is on a remote server that we access via telnet. Without an XServer session, I can't tell whether acroread is able to read and display the PDF files normally. However, we can view the PDFs with Adobe Reader 8.1.2 on Windows and the acroread -toPostScript command-line that we are using does work properly with other PDFs.
    I will email you a copy of a problematic PDF shortly.
    Regards,
    Steven Dickson

Maybe you are looking for