Which netbeans version corresponds to Studio 12 Update 3?

I want to try a netbeans Clearcase plugin with Solaris Studio Update 3. This is not listed in the "Available Plugins" list from Tools->Plugins, but it seems that I can download this from plugins.netbeans.org.
There seem to be three versions, for Netbeans 7.0, 7.1 and 7.2. Which version should I try? I don't see any Netbeans version indicator in the Studio 12 Update 3 product.
Thanks in advance.
Dieter Ruppert

OK. Thanks for the info. I downloaded the clearcase module for Netbeans 7.0 (it identifies itself as plugin version 1.2.0-42, which I think is the most recent version available there).
It installs without error; but there are obvious deficiencies (or mybe it's me not understanding the rationale behind this).
Does it make sense to ask questions here about this plugin?

Similar Messages

  • SQL Server 2008 R2: which version of Visual Studio do I need to keep database projects and SSIS projects in the same solution

    I need to build a solution containing a database project and an integration services project for SQL Server 2008R2.  Apparently, the subset of Visual Studio tools that comes with SQL Server 2008R2 does not include database projects and does not have
    Team Foundation Server support.  Because of those limitations, I am trying to determine which version of Visual Studio will allow me to:
    1. Build a single solution that includes both a database project and an Integration Services project
    2. For the database project, be able to import a database schema from an existing SQL Server 2008 R2 database, do schema compares and update the project from the database and vice versa
    3. For the Integration Services project, be able to deploy the packages to SQL Server Integration Services on SQL Server 2008 R2 (that is, to the msdb database).
    4. Use Team Foundation Server for source control of the whole solution, including both project types.

    Hi G Britton,
    To build a solution containing a database project and an integration services project for SQL Server 2008 R2 and use Team Foundation Server for source control.
     You can choose to install Visual Studio 2008.
    And as you want to utilize Schema compare and/or Data compare functionalities in Visual Studio, you will need to install the
    Visual Studio Team System 2008 Database Edition or Visual Studio Team System 2008 Team Suite.
    In addition, for Visual Studio issues, I would like to recommend you post the question in the
    Visual
    Studio forums to get better support.
    Reference:
    Team Foundation Version Control
    Compare and Synchronize Database Schemas
    Interoperability and Coexistence (Integration Services)
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • My iOS remains the same as whats inside my iPhone I bought it 18months ago, which is version 4.2.1, I am told by an Apple shop that its too old to do a proper update, unless all my data will have to be erased !! is this true ?  if so, how to get round it

    my iOS remains the same as whats inside my iPhone I bought it 18months ago, which is version 4.2.1, I am told by an Apple shop that its too old to do a proper update, unless all my data will have to be erased !! is this true ?  if so, how to get round it ?    Chuck

    Be sure to do a backup before updating as protection. Photos should
    be synced with your computer, music should be in iTunes, documents
    should be backed up on your computer as should contacts in whatever
    program you use on your computer. You should already have backups
    of your important information to prevent loss in case of theft, crash,
    physical damage. The question is not if your hard drive will crash but
    when, and you iPhone is not a backup device nor fit for the only
    source of any document, picture, music, movie, contact or otherwise
    irreplaceable information.

  • I have mac book OS X 10.4.11 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?

    I have mac book OS X 10.4.11 model No.A1181 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?

    Welcome to the Apple Support Communities
    You can upgrade to Mac OS X Snow Leopard, and then, you should be able to use OS X Lion.
    First, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup of your data, insert the Snow Leopard disc and upgrade to Snow Leopard.
    The disc will install Mac OS X 10.6.3, so open  > Software Update to install 10.6.8, the most recent Snow Leopard version.
    See if your Mac is supported > http://support.apple.com/kb/HT4949 If you see that it's compatible, call Apple to buy OS X Lion > http://support.apple.com/kb/HE57 Also, check if your apps are compatible > http://www.roaringapps.com

  • I use OS X Yosemite and Java Version 8 Update 25. Which java version is suitable for flash CS6?

    I use OS X Yosemite and Java Version 8 Update 25. Which java version is suitable for flash CS6?

    See System requirements | Flash Professional
    Java version 1.6 is included with Flash Pro.

  • Which version of iTunes  to update iOS 4.2.1 to 4.3.3?

    Which version of iTunes  to update iOS 4.2.1 to 4.3.3?
    I have used 10.5.2 and 10.2.2 and I get several errors from 3194, 1013 and 1.

    I don't have saved SSH for 4.3.3, is it still possible to update to 4.3.3?

  • After downloading the latest version of iTunes and updating my iPhone everytime I turn on my computer I get a message that reads: AppleSyncNotifier.exe - Entry Point Not Found. Does anybody know what this means?

    After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.

    Yes.  I just solved the problem on my PC.  Here goes...
    Issue:  My Windows7 computer was producing the pop up box with the error text as you described.
    The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
    Solution: 
    1.  You need to use the Windows File search feature to look for the name "SQLite".  This will quickly locate the offending DLL in the other application.
    2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
    3.  Uninstall Mobile Me.
    4.  Restart your PC.
    5.  Reinstall Mobile Me.
    6.  Mobile Me should sync at this point, but if not, restart the PC once again.
    In my case, the offending program was my Aptana Studio development application.  I had recently the SQLite3 database to my Ruby On Rails configuration...
    This is where the file was located:
    C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
    I hope this helps,
    Ron

  • Final Cut Studio update and FCPX

    So I've not noticed until now, but I now have a need for it. I need to update my Final Cut Studio 3 to the latest Pro App update. I have an editing gig that is requiring me to use FCP7 but I recently installed it to my new Macbook Pro and it's really unstable. I've had it crash on me way too many times.
    However, I have FCPX on my laptop as well. When I tried updating the Studio using the Pro Apps, update, it said it installed, but when I check the versions, it made no changes! So I'm wondering how I can actually update my Final Cut Studio 3 suite while I still have the FCPx and new Motion and Compressor installed on the same computer....
    Any help/suggestions would be greatly appreciated.
    Thanks
    -Justin

    ML should have no effect as I have both versions installed with no problems.
    Which app are you trying to update?
    You should use Software Update for FCS 3
    What version have you got?
    Do a "Get Info"

  • How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

    How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?  The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

    Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser).  At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
    If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects.  It has several themes and within each theme several layouts.  As far as they go these are fine but they do not give nearly enough flexibility.   The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box.  However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box.  For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
    I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction.  A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label).  The text then goes above and below the pictures.  All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well. 
    Some of the layouts have image locations severely reduced by the edge of the disc.
    As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

  • Is the latest version of FCP studio compatible with Radeon X1600 graphics..

    I read under the requirements that the latest version of FCP studio is not compatible with "integrated graphics cards"... what does that mean to me with an iMac that has a Radeon X1600 with 128MB and a bus type PCIe? Will it work?
    Thanks!

    Final Cut Studio 2 (with FCP 6) runs just fine on my 2.0 GHz 20" iMac CD, which has a 128 MB ATI Radeon X1600 with an external display (1280x1024) connected via DVI.

  • Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."

    It appears that Visual Studio 2012 Update 2 hangs for a long period of time before it tries to create a system restore point.  Should I create a Microsoft Connect issue for this?
    Here is what I did:
    I created a new Windows 8 x86 Virtual Machine using VirtualBox.  I installed Visual Studio 2012 and Update 1 because Update 2 was not yet out.  I came back 1 week later and tried to install Visual Studio Update 2.
    When I ran the installer on the Virtual machine, it hung for seemingly 10 minutes at "Creating a system restore point..." I powered off the virtual machine and disabled system restore.  I then ran with the /layout option on the host machine
    so I could pre-download the files.  Then I tried again.
    Again, it hung.  This time I let it go.  It hung for exactly 13 minutes before it gave up and continued on to the install.  The log file says this:
    [0EBC:0F90][2013-04-18T12:39:36]: Apply begin
    [0EBC:0F90][2013-04-18T12:39:36]: MUX:  Apply Phase Begin
    [0EBC:0F90][2013-04-18T12:39:36]: MUX:  -----------------
    [0EBC:0F90][2013-04-18T12:39:36]: MUX:  Metrics: ShouldSendData=False
    [0EBC:0F90][2013-04-18T12:39:36]: MUX:  Free Disk Space before install:  SystemDrive C:\ 32519413760 bytes  AppDrive C:\ 32519413760 bytes
    [01F4:0748][2013-04-18T12:52:34]: Creating a system restore point.
    [01F4:0748][2013-04-18T12:52:34]: Could not create system restore point, error: 0x80070422. Continuing...
    NOTE: Although it says "Creating a system restore point" at 12:52, it actually displayed the message on the screen at 12:39.  That indicates that it was really doing something else during those 13 minutes, not creating the restore point. 
    That is corroborated by the fact that it took a long time regardless of system restore being on or off.
    If no one has any information or explanation, I will create an issue on Microsoft Connect.

    I have the same issue. Visual Studio 2013 Professional update 2 was not installed from Web installer. Rather I downloaded a trial version and now want to uninstall it. However, I let the uninstaller try to create a Restore Point all night while I slept.
    Next day, not done. So I clicked cancel, and it then commenced to create a restore point for the cancel. I did let the cancel run for awhile but I rebooted.
    I then researched something on how to disable the restore point security on my drive, but that did not deter Visual Studio from trying to protect me and it TRIES to create a restore point before uninstalling. Just hangs forever. I don't need a restore point
    for an eval copy of VS, thank you very much. Perhaps a simple dialog ("Do you want to create a restore point?") would be helpful?
    Update: turning off Windows Defender fixed the problem. 

  • WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

    Hello,
    I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
    *TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
    *TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
    I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
    In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates  for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
    Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
    Regards

    Hello,
    I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
    Signature Algorithm: sha256WithRSAEncryption
    When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
    "We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
    I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
    Regards

  • Is it possible to get back 2.0 version coz I've updated it to 3.0...

    Is it possible to get back 2.0 version coz I've updated it to 3.0 and I'm not happy with it. The new features are cool and all but the thing is, the battery drains quickly. And who would want that? I'll be satisfied having the older version back if that's the case.
    Before updating my iPhone to it's latest version, the battery is not that easy to drain. But ever since I updated it to 3.0 version software, my iPhone does not even last for a day. WELL GETTING TO MY MAIN POINT, IS IT POSSIBLE TO GET THE OLD SOFTWARE VERSION WHICH IS 2.0? Please if you have any idea to answer my question, please do so. And tell me how and what to do. Thanks.
    Message was edited by: Alyssabeybeh=))

    I've experience the EXACT same problem. Apple Support didn't believe the battery draining coincided with the 3.0 upgrade. I've tried evverything. Apple was awesome in that they replaced myt previous iPhone. Problem is, the exact same problem persists. I've turned off all wireless except GSM. I've removed all apps. I've reduced brightness to nearly nothing. Still, the battery drains within 4 hours. I'm on my way back to the Genius bar today.

  • I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.

    I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.

    Solved in this way:
    Close Photoshop first, then:
    Download the 8.5 manual update link from here:  Don't run the installer, but instead just Open the zip file in Windows Explorer.
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
    Navigate inside the zip file to find the resources inside that correspond to the 64 or 32 bit Photoshop version that you're running.  I assume you have installed the 64 bit version, so the rest of the instructions will concentrate on the 64 bit Camera Raw.8bi only.  Here's the path:
    setup.zip \ payloads \ AdobeCameraRaw8.0All-x64-050614143245 \ Assets1_1.zip
    The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bits, just with a different name.
    Copy 1002 to your folder on your computer where your Camera Raw.8bi normally lives, e.g.,
    C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
    Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0.  It's important that the extension is changed to something other than .8bi.
    Rename 1002 to Camera Raw.8bi
    Run Photoshop and verify the Camera Raw version by choosing Help - About Plug-in... - Camera Raw.
    Thank you so much!

Maybe you are looking for