Which network adaptor in Pavillion ZE5500 CTO?

Hi,
I was going to install Windows 7 on the kids laptop, and with the support for hardware in Windows 7 I didn't even bother to check which network adaptor was in it. That decision came back to bite me
Could someone help me out with the name/model of this network adaptor, and if possible which Windows 7 driver works with it?
Cheers!

Lappy I think he means the wired LAN...it is National Semiconductor MacPhyter. Here is a link to the XP driver which might not work in Windows 7:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Not sure a Vista driver was ever written for this old device....try the national Semiconductor website. The MacPhyter was common on computers with an ALi chipset, as the ze4xxx and ze5xxx had.

Similar Messages

Number of network adaptors needed in RAC

hello guys,
in oracle RAC each node must have a minimum of 3 adaptors. one for private interconnect, one for public interconnect and one for serving the user requests (VIP).
1. also in oracle 11g with the introduction of SCAN. do we have to add a new network adaptor to make use of scan or can the network adaptor using the VIP address can be used for SCAN. if SCAN requires a new adaptor then it makes 4 n/w adaptors needed for each node,
2. Oracle documentation says that SCAN can be resolved to at most 3 network addresses. what happens if we have a RAC with more than 3 nodes.
3. How does this SCAN really work. it says that scan be used as a single IP address instead of defining several ip address in the tnsnames.ora file at the client side.
4. moreover the these SCAN ip Addresses are assigned by the DNS. i dont understand how can more than 2 system share a same ip address.
can any one help me understand these concepts please...

vishnusivathej wrote:
hello guys,
in oracle RAC each node must have a minimum of 3 adaptors. one for private interconnect, one for public interconnect and one for serving the user requests (VIP).I believe its not correct. There should be two adaptors only. One for the private interconnect, one for the pulbic. The VIP is going to be using the public interconnect only. The third one, is going to be required if you are going to be using it for storage.
>
1. also in oracle 11g with the introduction of SCAN. do we have to add a new network adaptor to make use of scan or can the network adaptor using the VIP address can be used for SCAN. if SCAN requires a new adaptor then it makes 4 n/w adaptors needed for each node,SCAN IP would be separate from the VIP. I am not sure that you need a separate adaptor for it since its also going to be a public IP.
2. Oracle documentation says that SCAN can be resolved to at most 3 network addresses. what happens if we have a RAC with more than 3 nodes.There is no mandatory thing that you need 3 SCAN network addresses. One can be used as well. 3 is the suggested setting for the setup. I believe for nodes more than 3 too, this would work. I have not installed 11.2 RAC for more than 3 nodes yet so can't be sure .
3. How does this SCAN really work. it says that scan be used as a single IP address instead of defining several ip address in the tnsnames.ora file at the client side.That's wrong. There is nothing like single IP address.SCAN is Single Cluster Access Name which means instead of putting VIPs in the client side tnsnames.ora, you are going to put just a SCAN cluster name whose VIP address resolutio is going to be done with the help of your DNS . Please read the documentation which explains the concept in lot more detail.
4. moreover the these SCAN ip Addresses are assigned by the DNS. i dont understand how can more than 2 system share a same ip address.Not sure that I got your statement.
HTH
Aman....

My wireless adapter is not showing in my device manager under network adaptors

I have a Pavilion, model p6210f with Windows 7
I have used it for 2 years with an ethernet cable and now I need it to go wireless, however, no wireless adpater is showing in the device manager under network adaptors, only showing the LAN.
Checking the specifications for this model at the hp website, it should have a 56K Win Modem.
Don't know what to do except go buy a USB Wireless adaptor, any ideas?
Called tech support, but I was given no assistance.

Hi:
Below is the link to the product specs for your PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01852858&tmp_task=prodinfoCategory&cc=us&dlc=en...
The PC does not come with wireless networking capability - only a wired ethernet adapter and a dial up modem.
The easiest thing to do is to purchase and external USB wireless network adapter.
Below is a link which will give you plenty of choices to consider. Look at the reviews and buy one that best suits your needs. You will of course, also need a wireless networking router.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=100006519&isNodeI...

Network stream Two network adaptor cards in PC comms with crio

Hi all,
I have two network adaptor cards in my pc which i think is causing my problems when collecting data over the tcp.
I'm seeing an error message -314340 from the create network stream write/read my address match up and i'm using a template crio vibration data logger.
I have two network cards in my pc. I think the error is a tcp one and I’m wondering if this is causing the problem. I’ve given the crio a static ip address 10.0.0.2 with mask 255.255.0.0
You can see the network adaptor below and it’s ip address 10.0.0.1 so I’m connected directly to this via ethernet cable. However from the Routes print cmd I don’t see the 10.0.0.2. Also the gateway for the crio is default at 0.0.0.0
Do I need to add the route to the list ? I found the cmd for that which I don’t think I’m using right… route ADD 10.0.0.2 MASK 255.255.0.0 10.0.0.1
Cheers
Solved!
Go to Solution.

Hi i'm using the crio data logger template from the create project list:
I'll post my code and some pretty pictures to help explain myself
I'm using a different crio, so i created a new project and configured the FPGA vi for my hardware, then added the host side. I can run the code see the waveforms after 10 seconds it outright crashes and i've been searching through all the error messages tracking it back to some unfound reason. The irony is sometimes the program creates a tdms file and makes a deposit in the crio folder/deposit (this is defined from an xml file)
I do notice within a few seconds the cpu on the waveform panel increases to 70+% before crash, so i'm also thinking the FIFO read is at fault, but it could be another red heiring (just installing the real time exection package so i can trace this better).
I've changed the number of channels from the default 4 to 2 please look in the VibConfig.xml file to see the change as the [Host] Create Config XML.vi doesn't like to changing the channel from 4 for some reason.
My set up is [SENSORS] ==> [cRIO] ==ETHERNET==> [PC] Please help
Attachments:
LOG3.zip ‏1584 KB
error63036.png ‏18 KB

Using multiple network adaptors

i have a network of macs and pc's, and i want to set it up so i have my macs able to access the net, but not the windows machines. the pc's are just fileservers which don't need access to anything other than eachother and the macs. all machines are connected to eachother by a switch, the macs also connect with their airport adaptors to an adsl router.
if i put airport at the top of the network adaptors list to prioritise it, i can't access anything over built in ethernet. if i put built in ethernet to the top, i can't access the net. i assume its because both 'work' so it doesn't move down the list to the next adaptor. i really need to get it working so the macs will try to route over both network adaptors, so whether i'm using the internet or browsing the local network, either one or the other will make it work.
i'd appreciate any advice. i am running 10.4 client and 10.4 server on the 2 macs. thanks.

re:
"Going the other way, I can connect to both 10.0.1.4 & 10.0.1.6 at the same time with the GO cmd from this wireless only machine."
yes, you're still going through the router so the wired and the wireless adapters (yes i just noticed i'd been spelling adapters wrong, oh well) are both connecting to the same thing so pinging/GOing to both ip's will work. for me my airport is connecting to a router, and my ethernet to a switch. it doesn't work because they are connecting to 2 different networks.
re:
"Hmmm, just connected the other machines Airport to an outside network and still able to get the Local network via Ethernet... the second one down."
you can connect to another wireless network yes but just getting onto another wireless network in itself isn't the problem, it depends if you can browse the other network or not, thats the trick. if you can while still connecting to the net through ethernet then thats what i need to be able to do. if you can, please let me know.

The Network Adaptor could not establish the connection while deploying

Hi All,
I am using oracle db 9.2.0.7 and OWB 9.2.0.4. When I am trying to deploy the object on remote database using owb deployment manager, it is failing to deploy object and giving an error "The Network Adaptor Could Not establish connection."
When I am trying to connect using SQL+, it is connecting as well as I can create the objects and all but the same thing I am trying to do using OWB, it is giving me an error.
What I understand is if there is something wrong with the tnsnames or listner, then it should give an error with sql+ as well. I have also check the c:\windows\system32\driver\etc\hosts which includes the ipaddress and host name.
Please help.
Thanks
-Mehul

Hi,
are You using 2 different Oracle Homes (one for OWB and one with main Oracle software)
If so, may be that the TNSNAMES.ORA in the OWB Oracle Home is not correctly configured.
Please check or clarify that
Hope this helps
Max

Wireless network adaptor not working

My wireless network stopped working, and the wireless network adaptor is not showing in the device manger. The keyboard indicator indicated wifi disabled (f12). Pushing then button does nothing. It was working fine earlier in the day. The only change made was an adjustment to text size which required a restart to take affect. The wireless adaptor did not work on the restart. Not sure what to try next to get it working again. Any advice would be appreciated. Thanks,

With two routers you'd have to put one of them into bridge mode. If the linksys is the second router then change its IP from 192.168.1.1 to 192.168.2.1
You'll still have WPA issues with this configuration because the linksys really is not setup to handle bridge mode very well.

What is a network adaptor

WE HAVE A TOUCHSMART 600 WHEN WE TRY TO CONECET TO INTERNET IT SAYES NEED NETWORK ADAPTOR WHAT IS THIS I SHOW MY CONETION BUT CAN NOT GET TO ANY IDEAS DO I NEED TO BUY SOMETHING FOR THIS THANK YOU

Hi,
It is a piece of hardware which allows you to connect to a Wifi network. TS 600 is a series of many models but all AIO machines should have network adapter ready. Please check the following link to fix (very similar for Vista and Windows 8):
Troubleshooting Wireless Network
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Wireless network adaptor installation on Satellite Pro L20

Hi there,
I have just bought a Satellite Pro L20 but it had been rebooted before I received it and the previous owner obviously didnt have the Toshiba drivers disk. Can anyone please give me a link to get the installation file for the wireless network adaptor card. I have been into device manager - network adaptors and the wireless adaptor isnt listed.
Any help would be greatly appreciated.

Hello
All stuff you need you can find on http://eu.computers.toshiba-europe.com > Support & Downloads > Support Homepage > Download drivers.
There you can find WLAN drivers for Intel and Atheros WLAN card. Before installation check which one you have.

Wi-Fi network adaptor not available on my Equium A300D

Hi
Hope u can help; I currently have the Toshiba Equium A300D laptop. It got a virus and corrupted 1 of my hard drives, which I now cant use, however I installed the operating system on my other hard drive, everything was fine until I tried 2 connect 2 the internet, windows diagnosed the problem and said it couldnt find the network adaptor for my Wi-Fi.
Can anybody give me some help in resolving this issue?
Many thanks

>...couldnt find the network adaptor for my Wi-Fi
Is WLAN card recognized and installed properly?
What is the status in device manager?
If everything is OK there I presume WLAN card is not enabled properly. At first move WLAN switch to ON position and then use FN+F8 combination to enable WLAN card.

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How do i find which network my phone is locked to

Can anyone tell me how i can find out which network my iphone 3gs is locked to. i bought it on ebay and was sold as unlocked to all networks but isn't.
thanks

Guess? The is no easy way to determine this. One of the downfalls of purchasing an "unlocked" iPhone on eBay. Most of these sellers are scammers.

How can i find out which network my iphone is locked to

Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
If any body can give me any advice it would be greatly appreciated.

call Apple

What network adaptors support 802.11ac?

I want to purchase the new airport/time capsule mainly for it's 802.11ac capabilities. I have a mid-2009 macbook pro.
Wondering what network adaptors are out there that I can plug into my usb that can support 802.11ac? I found some but they only support Windows.

Newer AC wireless would need to support USB 3 standard but of course that is not available.
I want to purchase the new airport/time capsule mainly for it's 802.11ac capabilities. I have a mid-2009 macbook pro.
You only have one port that is near capable (actually more than capable if real numbers are used) and that is ethernet. So the best device for you is a second Airport Extreme working as bridge or extend wireless in apple terminology.. really it is not such a bad option since the cost of AC usb 3.0 will be over $100 anyway.

Connecting iMac to ASDL router via home Phone Network Adaptor (PNA)

I connect to the internet via an ASDL Router from BT called the Network 1200.
This allows other computers in the home to connect to the router via a telephone point close to the computer. This is achieved by plugging a Phone Network Adaptor into a USB port on the computer on one end and the telephone socket on the other. The driver for the PNA is contained on disc. I have been connecting several PCs to the router in this way for many years.
I then buy a new iMac, load the driver for the PNA. Plug it into the USB port (expecting this to connect the iMac to the router and so achieving an internet connection) ....but nothing happens. iMac doesn't even acknowledge something has been plugged into a USB port. This works perfectly well with any other PC.
Can anybody help steer me in the right direction to solve this?
Thanks
Unbeaten449

The Driver was meant to be compatible with a Mac but I guess it could have been for earlier Macs and operating systems. Next question is where do I get one if one exists?
Unbeaten449

Which network adaptor in Pavillion ZE5500 CTO?

Similar Messages

Maybe you are looking for