Which network cards works with Solaris 8?

Hi,
I am installing Solaris 8 on a PC but I am having a problem finding a network card that the system will recognise.
I have tried HP and Intel cards but always see the error message "iprb: iline value out of range: 255"
Is there a particular brand/model of card that I should get?
Any help would be much appreciated.
Jon

Hi,
You refer this URL: http://soldc.sun.com/support/drivers/hcl
Here you will get the compatibility list for solaris 7 and solaris 8 versions.
revert back.
Thanks.
regards,
Senthilkumar
SUN - DTS

Similar Messages

Which Express34 Cards work with the latest Yosemite?

I'm running OS X 10.10.1 on a MBP 17" which I just bought 2nd hand - it all seems fine EXCEPT the Thunderbolt port doesn't seem to work - "No Hardware Found".
It is a Mid 2010 machine.
I suppose I will have to go to the apple store to fix the Thunderbolt issue (unless anyone has ideas?) but in the meantime I would like to buy an Express34 Card with a USB3 port for me to use as a stopgap. Easier said than done it seems. I've read lots of comments that generic cards don't work etc.
Can somebody tell me which product will work under this setup? Does it have to be a 'mac branded' one? If so, which?
Thanks very much!
Phil

First be advised that a 2010 MBP has only a minidisplay port. It is not a Thunderbolt connection.
I have an OWC and a Sonnet Express34 cards in my 17" MBPs. Both work with no problems. I use it for eSata connections to my external HDDs. Do not expect to get USB3 transmit speeds via the card.
Ciao.

Which Sprint broadband cards work with Mac OSX Lion?

My company uses Sprint and when I upgraded to Lion, my Ovation U760 broadband modem was no longer supported. I can't find any Sprint cards on their webpage which indicate they work with Lion.

Well, you can try to shame us if you want, but the discussions I heard
around me was that it was more important to deliver cross-platform mobile
development when we did than to wait and divert energy and time to
certifying on a new OS version, and potentially wait for a new Eclipse
version before we could do that certification. Everything under us keeps
changing and we have to pick a point in time and ship. Then we start
upgrading and certifying on later stuff. We are in the process of
certifying on Lion.

I have an airport extreem network that works with two MacBooks. I am trying to get my PC (IBM ThinkPad) to connect to the network. The PC has airport for the PC downloaded but it will not recognize the network. Any suggestons please!

I have an airport extreem network that works with my two MacBooks and a iMAC. I am having no luck in getting a PC (IBM ThinkPad0 that has the PC airport software to be recognized by the network. Any suggestions?

When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
AirPort Utility > Select the AirPort > Manual Setup
Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode)

Installation CDs : which network card drivers are included ?

Hello,
I intend to install Arch on a laptop with Broadcom and Atheros network cards (LAN and Wifi).
I would like to check which network card drivers are present on the Arch installation CDs to check compliance with this laptop.
Where can grab this info ?
Thanks.
Bye,
Bruno

Thanks for attention.
The network cards present on my laptop (Acer Aspire 4750) are :
Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PC-Express) (rev 01)
Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
I would like to check if the needed drivers (one or both) are included in the installations CDs (netinstall / core).
Bye,
Bruno

Will an onboard garaphic card work with the lates version of photoshop or do I have to have a dedicated graphic card

Will an onboard graphic card work with the lates version of photoshop or do I have to have a dedicated garphic card

Most likely you should be fine. Some of the early i7s might not support it (did the first i7 core have integrated GPU?), but any of the last couple are fine. The nice thing is, that you can always add an aftermarket GPU if you need to, so give it a shot.
I have a Haswell i7 (4770k) in my desktop PC, and it's more than enough. I did a lot of research when I built my PC and my conclusion at the time was that a GPU doesn't offer a sizable performance boost unless you buy a really nice GPU ($400+). The integrated GPU can run all the functions of CS6.
My laptop is an older i5. Not sure which, but I think Sandy Bridge. I can notice the difference in process times between the integrated GPU and discrete (AMD). But only on certain heavy filters and when working with big composites (~2 gb files). But that's an i5 and and older one. That said, the integrated GPU is far more stable, so I usually just put up the lag instead of having the AMD GPU crash my computer.

Network card problem with Mobo make the computer crazy!!!

Im using a msi 745 Ultra version 10/cpu xp2400/basic graphics card/40gb HD, 256mbs of drr
I have tryed 2 networks cards both with the same results & even changed mobo & ram/graphic card/HD.
The computer seems to work fine untill i decide to put in a NIC.
It starts to post the wrong processor speed/screen decides not to display sometimes & takes a little longer to boot into windows. It will also some time crash when i turn on the computer. If i try to save something in the bios it will then reboot & then try to boot of the floppy drive.HD / CDrom drive but will not find them.This has happend on both mobos.
This is a very odd problem im getting need some help ASAP.

Sorry Bakes...folks aren't just waiting arount to help you. Expecting an answer in 2 hours is placing to high of an expectations on a user to user help forum.
No one here works for MSI, we are all users, just like you.
If you have not seen a reply, then there are several reasons that may affect why there has been no reply.
No one knows, or can offer o good answer to you question.
The question is too general and you did not supply the necessary information someone might need to even begin helping you. I have provided the basics on what we need at the top of this forum.
No one may be familiar with your motherboard's chipset, perhaps someone is but they have not visited the forum lately.
I can give only some general tips to consider for the time being.
Some incompatabilities may exist with a certain NIC card.
Check PCI slot IRQ sharing conflicts. Typically I stay to the middle slots and avoid the first and last. You may have to power down, move the card to another slot, and power back up. Each time checking your IRQ's in either Device Manager or System Information to see that the card is on its own IRQ.
Improper BIOS settings can cause conflicts.
Try "Plug and Play Aware OS" set to "No" and let the BIOS manage things or set it to yes and let Windows do it. In most cases it has been recommended to be set to no.
Upon installation of new hardware the setting "Reset Configuration Data" can be useful in avoiding lockups after POST due to conflicts recognized during "Verifying DMI Pool Data"
Possible reasons: Hardware change, BIOS settings change, improper connection of IDE cables, corrupt MBR (Master Boot Record) of the HDD (Hard Disk Drive), defective HDD or defective mainboard.
Possible causes: Hardware incompatibility, virus attack, electric circuitry damage/defect, corruption of data, improper BIOS settings, over-clocking damage.
*NOTE* Some Chipsets do not support this feature, see manufacturers documentation.
That's about all I care to share for now.
Good luck........

Will ATI Radeon HD 5800 card work with Premier Pro CS5 Mercury engine?

Hi There:
I've been using Premeier Elements 7 for the last 2 years and am about to buy Premeier Pro CS5. But having read the video card requirements I'm confused.
Will my video card work with PP CS5 and the Mercury playback engine? My card is the ATI Radeon HD 5800 with 1 gig memory?
The dealer specifically sold me that 18 months ago so I would be able to move to Premiere Pro with no problem. I have an Intel Core 17 with 10 gigs of ram and a great ASUS motherboard.
Thanks,
Rudy

Hi Harm:
Thanks for the reply. I checked my RAM and in fact it is 12 gigs. I got it put in 18 months ago when I bought the system. I had to use Windows XP back then. Anyway, I now need to change to Windows 7 and Premiere Pro.
I had no idea back then that I was buy the wrong video card for Premiere Pro.
I am not familiar with the terms you and the other two respondants have used in your replies, and I have no idea what it means that my system will run 10 times slower than if I had a NVIDIA, whatever it means it sounds bad. Which is really too bad because I spent a small fortune buying one of the fastest card available at the time.
What do you suggest I now do?
1) Just use my system as is? It sounds like my performance will be terrible, so should I really go this route? I will be editing MPG2 codec from a Canon XF100 shot at 50 mbps.
2) Should I try to sell off my ATI card and buy one of the recommended cards?
3) Should I just go to the Sony Vega Pro systems?
Your suggestions would be greatly appreciated.
Thanks
Rudy

HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

I have the iPhone 4S and would like to purchase a docking device. I have the Otter Box Camo case and would like to know which dock will work with the
case ON. Thank you.

it might be better to contact otterbox to find out from them what they made it compatible with.

Which browsers will work with mac ver 10.4.11

which version firefox works with mac ver 10.4.11

Firefox 3.6.x is the last version of Firefox for PPC Mac's from Mozilla.
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Which range extender works with the Linksys CIT400 phone?

Which range extender works with the Linksys CIT400 VoIP phone? Can I use any range extender from any other comany or does it have to be one from Linksys? I am not sure if the CIT400 uses standard frequences.
On a side note, where's the forum for the phones? I see one in the archives section which seems to be ready only.

You can use the Linksys WRE54G range expander. For that matter, any 2.4Ghz range expander will work. But what’s more important is what router you would be using the range expander with!! Which router are you using?

Does HP Proliant DL380 G4 work with Solaris 10?

Hi everybody!!!
I�d like to know if anybody made HP Proliant DL380 G4 work with solaris 10.
I didn�t find this server in HCL for solaris 10.
has anybody tried to install solaris 10 on this server?
tnx very much
regards
The player

I've tried. The biggest stumbling block is the RAID controller if you are using one. I was using a Smart Array 5300 but couldn't find a driver. As memory serves me, and it was a year ago on a G3 with version 9, you need to use the second or third ( I forget) CD for Solaris and not the first to set it up and you need a startup diskette (my name for it, Sun calls it somethig else) with the array driver on it. It was a real pain especially when my version of Red Hat Liniux found the controller right off the bat and installed nicely with NO errors. I think Sun's clunky installation needs some work to make it work better. Maybe Solaris 10 is different.

Can a PC ATI X1600 XT AGP card work with my MDD..

Can a PC ATI X1600 XT AGP card work with my MDD?

I have a friend that made the mistake of buying a (new) non-Mac edition ATI card. Not the card you've specified, this was a few years ago, but everything worked for him, with OSX. His biggest issue was the loss of the ADC connection on the card, getting DVI connectors only instead. That means a trip to Apple to get an ADC-DVI converter, mine was about £100 for my second display. My friend payed slightly less. At the end of the day, it would have been cheaper for him to pay the £30 extra for the Mac edition.

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Which network cards works with Solaris 8?

Similar Messages

Maybe you are looking for