Which nforce2 board has soundstorm?

I'm thinking of (upgrading?) my current KT4 Ultra board for a MSI nforce2. I have a few questions though...
What is the model number I'm looking for that offers the nvidia soundstorm/network options, but without the integrated graphics ?
Can these boards allow vcore adjustments in the bios with a tbred xp (1800) beyond 1.6? Currently this KT4 Ultra does not.
Which, if any multipliers work?
Thanks alot!!!

there is not one,only ones one in my signature im waiting for,with vga raid firewire etc
but 1 lan only not 2
no same vcore
yes as far as im aware,do on others at least
usa sites wrong look at board via this ones links

Similar Messages

  • What nForce 2 board uses Soundstorm?

    hello,
    what boards use soundstorm?  does asus use the mcp-t, soundstorm?  how about msi?  i read something about realtek on asus....if they didnt use apu...very stupid....
    thanks,
    edison

    Quote
    Originally posted by paazel
    which is better?  why?
    I don't know which solution is better.
    For sure i don't like the way it is with Asus right now.
    You have to force the install of the drivers and skip some warnings. but it works.
    If MSI puts up a 'clean' solution like leadtek you will have no trouble regarding the install of the audio driver.
    What I don't understand is why so many mobo makers add this realtek or cmedia stuff to their mobos when they have the MCP installed anyway?
    Do they get audio-less MCP's at a discounted price?
    That's why i bought my MSI K7N420 a year ago.
    It was the only board at that time which had the pure and clean (no additional fuzz) audio solution.
    the MCP sounds great and has good performance as well.

  • How to know if board has already been intialized

    Hello,
       I am trying to automate a microscopy stage.  I need to be able to move the stage in XY with blended motion, and in Z with single axis control.  I have been able to do this but I still have one glaring problem.  The module for the XY stage may be loaded first, or the Z stage may be loaded first.  The one that get loaded first needs to initialize the board, and then the rest need to just run on the board.  I do not know beforehand which one will be first and I have not been able to figure out how to transfer this information between the programs as I have multiple boards that are running from this system and the user may decide to control the stage with one board and the Z focus with a different one.  
    So with all of that, is there a function that will tell you if the board has been initialized.  Here is what I want to do
    Start .dll
    Get properties (Board ID, Axis, blend mode....)
    Check if board is initialized.   If not then flex_initialize_controller (BOARDID,null);
    Set up axis...
    Run program.
    Thanks
    Solved!
    Go to Solution.

    When an NI 73xx motion control board is not initialized (e. g. after a power cycle or a board reset), the board is in Power-Up Reset state. The initialization routine needs to reset this flag to prepare the board for normal operation. You can read the Power-Up Reset flag with flex_read_csr_rtn().
    I hope this helps,
    Jochen Klier
    National Instruments

  • Which 6330 board do I have??

    can someone please tell me exactly how to find out which 6330 board I have?  It is supposed to be the Lite version, but it has the jumper that allows me to run an Athlon Thunderbird 1.3 @133 FSB.......
    I cant tell if I have the Lite or the LE3 version....

    Well you could always take off your case, and look some where between your pci slots. You should see the label, it should have a name for example k7t turbo ver. 3 or something in that manner.

  • My built-in  key board has stopped working how can i fix this?

    my built-in key board has stopped working all of a sudden how can i fix this?

    Did you spill any liquids on your keyboard?  If you are in the habit of eating and drinking while using your computer, the keyboard is probably dirty.  Use a can of compressed air or a vacuum hose to remove the debris underneath the key.  If that does not work, you may actually have a hardware issue.
    If you Apple Care, call them and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
    NOTE:  If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
          If you have Homeowners insurance, place a claim with them.
    How to remove and clean your Macbook Pro Keyboard 
    Cleaning Macbook keys after a spill

  • Logic Board has failed 3 times...2011 MB Pro 15 Inch

    So I have recently had a ton of issues with my MacBook and it is really starting to get annoying. I had my logic board replaced in March of this year. The repair cost me around $350 as the warranty was up. The logic board failed again at the end of August. I brought it back in to the apple store and they replaced the logic board again, but for free this time. I was extremely impressed with their customer service, they even replaced my display which had a small crack. Everything worked good as new until last night. Once again the same issues as before, so obviously they logic board has failed for a third time, which is a little ridiculous in my opinion. I will be taking it in to the apple store after work today to see what's going on.
    Three logic boards in the span of half a year can't be normal...Is this a sign of some other issue? Is it time to ditch this POS and get a PC? Could it be something I'm doing on my end? I rely heavily on my laptop for work and need something that consistently works. Apple's customer service has been top notch through all of this, however the actual product has not been. I would love to hear other's opinions/experiences with similar issues.
    Thanks!

    Perhaps - and I mean PERHAPS - you'll be offered a replacement unit this time around: it all depends on how the manager is feeling that day. A number of 2011 models have had three logic board replacements and USUALLY the fourth time around, folks are offered a new replacement unit.
    Don't count on it but if it comes down to pleading with a manager, DO IT!
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Which DAQ board to use?

    We're doing a research that is dealing with daq and control. Basically, we
    have about 60 input and exactly 5 output to 5 control motors. We're
    considering buying a daq board. With this spec, does anybody have any idea
    on which ni board to choose?

    The main problem being that no NI multifunction daq card has more then 2 output channels, your solution will be to have more than one card in your system. To be more detailed, some more details are required on your needs, and perhaps the best solution is to call a NI office.
    To design the correct mix of cards to use you will decide:
    . Which signal to output (current or tension, and in which range)
    . Characteristics of the input signal (again: current or tension and which range; in addition: if single ended or differential, i.e. common referenced or floating sources)
    . Sampling rate desired both for output and input
    . Software to use for the system. If labview: development system or standalone executable?
    You could also use the daq designer (the ni utility for
    configuring an acquisition system, http://cosine.ni.com/ddonline.htm - there is also the possibility to have a free copy on CD): you will probably be guided into an SCXI system, which can be neither the simplest nor the cheapest according to your actual problem.
    Hope this helps
    Roberto
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • I have a Mac book pro, 15" that I bought 4 years a go, the logic board has died, what recoarse do I have with Apple regarding a product that should last years

    I have a 15" Macbook that I bought in late 2007, which is just 4 years old Since then the battery wont hold a descent charge, the screen had to be changed and now the logic board has died. plus there is an issue with the video card for that same model. I would expect a product that carries the Apple brand to last longer. They are not cheap to buy and its some thing that I cant afford to replace every few years. Does any body think that Apple has an obligation to do the right thing or am I expecting too much.

    Four years is a pretty typical lifespan for a battery (and for a computer in general).
    Does any body think that Apple has an obligation to do the right thing or am I expecting too much.
    You are expecting too much.

  • How to find out the PO line items for which no GRN has been done

    Dear Friends,
    I need a report which will show all the fully open PO items for which no GRN has been done.
    In ME2N when I give the selection parameter "open goods receipt" then it shows all the line items with partially & fully open. But my requirement is to get a report of only fully open items.
    Regards
    Rutabhadra Panda

    Hi Friends,
    Thanks a lot for your reply.
    But this is a report which projects the expected GRNs & does not depend whether partial or full.
    Is there any other way out?
    Can  I download from the table directly.
    Regards
    Rutabhadra Panda

  • How to find out which cube/ods has the code

    hi,
    I want to find out which cube/ods has the start routine/update rules written in it.  Is there a table or Tcode to find out the code instead of opening each cube/ods to find out whether there is code in it or not.
    Thanks,
    Sam

    hi Sam,
    take a look
    /message/3483792#3483792 [original link is broken]
    try RSTRAN, field STARTROUTINE
    related tables
    RSAROUT
    RSAABAP
    RSAABAPINV
    RSAROUTT
    Technical name of start routine
    Re: How to get info about a GP* program?
    Re: Search for start, update rule, etc. that uses infoobject
    if couldnt find out, you can use ST05 'sql trace', open 2 session, one for create start routine, and one for ST05, activate with option 'sql trace', then create start routine and 'deactivate trace' and 'display trace', and check out the tables list
    hope this helps.

  • How to find Responsibility through which the user has logged in to Disco.

    Hi All,
    I have got a requirement to create a "Usage Report Summary by Responsibility" for all Oracle user having an Access to Oracle Disco Viewer.
    In the report, I need to show the list of Oracle Users and the Responsibilities through which an User has logged in to Disco Viewer.
    Kindly help me in finding the corresponding Disco tables to full-fill this requirement.
    Available Information/queries in my Hand:
    1. Query to find the list of Workbook and its shared Responsibilities
    2. Query to find number of times an Oracle Disco Report has been run.
    Thanks a ton in Advance
    Arun

    Hi Arun
    The first place to look is to try running one of the pre-built workbooks created by Oracle for this purpose.
    I see you are working in Apps mode. Therefore, you'll need to run both of these scripts when logged in as the owner of the EUL:
    1. EUL5.SQL
    2. EUL5_APPS.SQL
    You will find both scripts in the $ORACLE_HOME/Discoverer/Util folder where your Discoverer Administrator tool is located.
    Next, you will need to log into the Administrator tool and import this EEX file: EUL5.EEX
    You will find the EEX file located in $ORACLE_HOME/Discoverer, again on the PC where Discoverer Administrator tool is located.
    After you have imported the EUL, log into Desktop or Plus and open up the EUL5 workbook that you will now see in the list and work through the various worksheets. You should find one or two that will give you what you want.
    Let us know how you get on
    Best wishes
    Michael
    http://ascbi.com

  • PO List in which Payment Terms has been changed

    Hi,
    Please let me know how can i find the PO List, in which Payment Terms has been changed.
    Is there any table for it..
    Plz help...

    Hi,
    The change documents are stored in CDHDR (Header table) and CDPOS (Item) tables.
    You can find out the list of PO objects in theses tables.
    Cheers,
    Satish

  • How to determine which FileChooser ExtensionFilter has been selected

    Hi,
    I'm using a JavaFX fileChooser.showSaveDialog with two extension filters (*.csv and *.xml). How can I determine which filter was selected when the end-user clicks the save button?
    I am writing a program that allows the end-user to create an output file in CSV or XML format.
    If the end-user enters a file name with no extension, I need a way to determine if I should create a CSV or XML file. I would also like to add the proper extension to the file name if none is specified by the end-user. I want to do this based on which filter the end-user has selected. I wrote a Java program 5 years ago and I was able to do this with the following instruction:
    String extension = jFileChooser.getFileFilter().getDescription();
    I can't find a similar instruction for JavFX.
    My JavaFX Code:
    FileChooser fileChooser = new FileChooser();
    fileChooser.setInitialDirectory(new File(options.getOutputDirectory()));
    ExtensionFilter filter1 = new FileChooser.ExtensionFilter("Comma Delimited (*.csv)", "*.csv");
    fileChooser.getExtensionFilters().add(filter1);
    ExtensionFilter filter2 = new FileChooser.ExtensionFilter("XML Document (*.xml)", "*.xml");
    fileChooser.getExtensionFilters().add(filter2);
    File file = fileChooser.showSaveDialog(stage);
    String filename = file.getAbsolutePath();...How do I determine which extension filter has been selected?
    My Java Code:
    JFileChooser jFileChooser = new JFileChooser();
    jFileChooser.setCurrentDirectory(new File(outputDirectory));
    jFileChooser.setSelectedFile(new File(backupfile));
    FileFilter filter = new FileNameExtensionFilter("Comma Delimited (*.csv)", "csv");
    jFileChooser.addChoosableFileFilter(filter);
    jFileChooser.setFileFilter(filter);
    filter = new FileNameExtensionFilter("XML Document (*.xml)", "xml");
    jFileChooser.addChoosableFileFilter(filter);
    jFileChooser.setAcceptAllFileFilterUsed(false);
    jFileChooser.setDialogTitle("Export Alarms");
    jFileChooser.setBackground(colorFileChooser);
    int returnVal = jFileChooser.showDialog(jFrame, "Export");
    if (returnVal == JFileChooser.APPROVE_OPTION) {
        File file = jFileChooser.getSelectedFile();
        String filename = file.getAbsolutePath();
        String extension = jFileChooser.getFileFilter().getDescription();
        if (extension.equals("XML Document (*.xml)")) {
            if (!filename.endsWith(".xml") && !filename.endsWith(".XML")) {
                filename = filename + ".xml";
            saveTableXML(filename);
        else if (extension.equals("Comma Delimited (*.csv)")) {
            if (!filename.endsWith(".csv") && !filename.endsWith(".CSV")) {
                filename = filename + ".csv";
            saveTableCSV(filename);
    }Thanks,
    Barry
    Edited by: 907965 on May 13, 2012 1:14 PM
    Edited by: 907965 on May 13, 2012 1:15 PM
    Edited by: 907965 on May 13, 2012 1:19 PM

    This problem is currently tracked as http://javafx-jira.kenai.com/browse/RT-18836.

  • In ALV output, select row(s), How can we know which record it has selected?

    Hi Experts,
    In ALV output, there are 10 records (rows) displayed. I want to select specific row (or rows) for mass printing ( I need to assign respective smartform for selected row(s)). How the system (or my self) will recognize that which record it has selected?
    We have one field is called MARK field or etc., which will shows which record selected by indicating 'X' in internal table. I dont know exactly.
    Could you please help me out.
    Thanks in advance.
    Sekhar

    declare a field chk(1) type c in your final itab.
    build fieldcatalaoge for that field.
    when 'CHK'.
    alvfld-checkbox = alvfld-edit = 'X'.
    give a button in alv 'process' with function code 'PRO'.
    then call alv
      call function 'REUSE_ALV_LIST_DISPLAY'
        exporting
          i_callback_program       = sy-repid
          it_fieldcat              = fieldcat[]
          I_CALLBACK_USER_COMMAND = 'USER_COMMAND'.
        tables
          t_outtab                 = it_tvse[].
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    then in form user_command do like this
    form user_command using ucomm like sy-ucomm cursor type slis_selfield.
    case sy-ucomm.
    when 'PRO'.
    Loop at itab where sel = 'X'.
    write your code here.
    endloop.
    endform

  • Select a location to which a plant has been assigned

    Hi all.
    We Work in SRM 5.0 Extended Scenario, ECC 6.0.
    When I try to make a PO from a SC system sends me the following error: Select a location to which a plant has been assigned.
    I made corrections in the organizational unit, assign default to the plant as buyers in extended attributes, but the problem persists.
    Any help will be good.

    Hi Raul,
    Check whether in the Extended Attributes of P.Org / P.Group where the user is assigned has Locations maintained or not.
    Also check for any check in the Deactivate check box.
    Check in BBP_LOCMAP table using SE16 txn. whether all the plants concerned were replicated from the correct logical system or not.
    Otherwise once again replicate the plants using BBP_LOCATIONS_GET_SELECTED report.
    Check for the consistency of Business partner using BBP_BP_OM_INTEGRATE txn by inputting the business partner number of plant.
    Please let us know after checking and modifying the above mentioned points for further help.
    Hope this will help you in resolving the issue.
    Award points for helpful answers.
    Rgds,
    Teja

Maybe you are looking for