Which NUC system I'm ? MDMP or Ambiguous Blended Code Page or Unambiguous blended code pages ?

Dear Experts,
We use ecc6 ehp5 non unicode system, we need to make unicode conversion.
How can i know the non unicode system i used ?
MDMP or Ambiguous Blended Code Page or Unambiguous blended code pages ?

Thanks
But i think we have complicated scenario.
We install language EN, FR, GE.
And we use code page 1100 only.
In NUC system, We read and write arabic when we change the GUI character set to arabic.
In UC system, Even we change the character set to arabic .. stil see un meaning character for arabic language.
I don't know how arabic is enabled in NUC system without code page or installed languages.
This NUC system running from 10 years as 4.7c then we upgrade to ecc6 ehp5.

Similar Messages

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.

PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

How to find in R/3 System, which FI document is from which external system?

Hi Moderator/ FICO Experts,
How to find in R/3 System, which FI document is from which external system?
In case of different Non-SAP external Systems posting the data to one R/3 System.
Thanks
Chandra

Hi,
That really depends on the interfaces that your external systems are using. Check with your ABAP or BASIS team to see what is the method used for posting those documents and with which parameters is passed. Look at BKPF table (FI header) to see the attributes such as user, document type, reference, etc.
Regards,
Eli

Which runtime systems do i need to configure in CMS

Hi,
We have development,Test,Production systems in the system landscape.
So What runtime systems do i need to configure in CMS
I am assuming it should be
Development-Development
Consolidation-Test
Test-?
Production-Production
Which runtime system do i need to configure for test system in my landscape(is it consolidation or test).what exactly is the role of consolidation runtime system.is it mandatory to configure that runtime system
Points will be rewarded for the helpful answer

HI Bala,
configure system as
Development-Development
Consolidation- if you dont have server then dont configure it.
Test-Test
Production-Production
NWDI upto consolidation is driven by activities. and assembly to production is driven by SCA. i.e complete software packaging
as Test server means where you can test your complete application.That means you need to deploy whole application as a sca file.
and in NWDI sca file is generated after assembly.
consolidation is only for verifying you changes before packaging you application. it can't be a test server.

Which operating system: Linux or Windows Server 2003?

Hi,
it doesn't matter which operating system we install an our server.
What are your experience with Linux and Windows?
Which System do you recommend regarding performance issues?
best regards
Felix

Linux has a higher per process memory limit. The fmscore process can use up to 2 GB on Windows and up to 3 GB on Linux.
The performance increases in Flash Media Server 3.5 are roughly equivalent on Linux and Windows.
HTH,
Jody

My MacBook Pro is still running the OS X 10.5.8, can I install the Mavericks directly? Or could you advise which latest system is able to be installed for my notebook?

Hello, my MacBook Pro is still running the OS X 10.5.8, can I install the Mavericks directly? Or could you advise which latest system is able to be installed for my notebook?

First up, we don't know what kind of MacBook you have so we can't tell you what OS you can run. You can use this instruction to identify which MacBook model you have: http://support.apple.com/kb/ht1635. Alternatively, from the Apple menu open "About this Mac". From the window that pops up, click "More Info". This will open the system profiler. Click "Hardware" and locate the model identifier, there.
Next, you need to determine if your system can even run Mavericks before you can go about installing it. These are the requirements:
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Lastly, as you'll note from the above, you can't update to Mavericks (or Mountain Lion or Lion) from 10.5.8. Mavericks is only available in the App Store. You need to be running Snow Leopard (10.6.8) in order to download and install any OS from Lion (10.7) and up. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

I have a MacBook Pro2,2 with an Intel Core 2 Duo , 2.33 GHz processor speed and am running OS X 10.4.11 and am having trouble finding which operating system update my computer will support?

have a MacBook Pro2,2 with an Intel Core 2 Duo , 2.33 GHz processor speed and am running OS X 10.4.11 and am having trouble finding which operating system update my computer will support. Any advice?

Mac OS X 10.7.5, which requires getting a Mac OS X 10.6 DVD from the online Apple Store and a download code for 10.7 by phoning them.
(73160)

How to decide if a system is an MDMP?

Is there a place to see that? I remember there is a table.
Thanks!

Hello,
How to check if the system is a Single Code Page System
If you are not sure whether your system is a Single Code Page system or not, open database
table TCPDB in transaction SE16. If this table contains only one entry, it is a Single Code
Page system.
If TCPDB contains more than one entry, the system is an MDMP system.
So what is result in your case depends of number of entries at table TCPDB.
Best regards,
Peter

Which Operating system most company use to run oracle?

Which Operating system most company use to run oracle?
thanks

If you are trying to decide on a platform, I would recommend that you look at Swingbench and run your own benchmarks on various platforms using vendor "try and buy" options. Sun is great for allowing a 90 day "try and buy" where you could try a wide range of platforms and I am guessing other vendors would do the same. Using Swingbench I recently found that an older Sun X6220 (blade server) was for 50 Swingbench users faster than a T6340, T2000, M5000 and older V890. Single threaded SQL was especially slow on the SPARC/T while the M5000 was comparable to the X6220 (again for 50 users). This is significant because the M5000 is much more expensive than the X6220 (a blade server).
For a small number of users, say 50 users and under, I like Solaris/x86 unless there will be lots of IO which is where SPARC and the M series scales up very well. 50+ users hammering on a DB, Solaris/SPARC is my first choice. If you are just getting started and are not in love with any platform, check out Oracle Unbreakable Linux.

In which table system change options are set

In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

Joe,
Below link & sap notes may be useful.
http://www.saptechies.com/how-to-activate-the-img-change-log/
388691 Cross client customization, system change options
184586 - System change option and BW
Thanks
Sushil

Which legacy systems are used for what purpose?

Hi gurus,
I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? <b>can any body send me a link that can help me understand when and where, which systems are used for what purpose..</b> I have a general understanding of Legacy systems so i am not looking for terminology explanation, i would appreciate any thing that is related to business and explains the purpose.
thanks,
kishore karnati

Hi,
Term legacy system means tailor made system by group of software developer or any branded software which deals with the group requirement like tally we user for finance.
Legacy system can be based on any technology like visual basis as front end and oracle as back end or Developer 2k as front end and oracle as back end. For report most of the legacy system we have seen uses crystal report.
You can develop and implement based on the requirement from the user though you need to define some specify process to keep the system streamline which is in your hands.
Concept like devlopment/quality/production we don't have that verys strict concept.
More and more they are not intergrated each other functionally mean lets say inventory has come to the godown then your vendor outstanding should increase in finance which does not happens you need to key in the seperate value for it.
Hope this helps!!!

Which operating system has the least problems for IPad

Which operating system has the least problems for IPad? I have 3.0 and probably should upgrade. Thanks

You're using an original iPad? Definitely upgrade to the newest version of iOS. Many apps will require iOS 5.1.1 and it will run fine on your iPad.

Retail: In which POS system do we create SAP TLOG file

Hi Gurus,
Can anyone tell me in which POS system (is it SAP Triversity?) we create SAP TLOG files( or) in someother POS sytem we create SAP TLOG files?I just want to know the POS System name where this SAP TLOG files are created?Hope for correct answer.
Thanks in advance
Thanks
Tonyrao

Hi ,
The Genral Landscape for SAP IS Retail is Store -> ETL -> POSDM -> ECC.
The TLog file in SAP Architecture resides in POSDM and the actual name of this deep structure table is /POSDW/TLOG.
When the BAPI CALL runs it pushes data in this table. And when data processing takes via PIPE Dispatcher
/POSDW/PIPEDISPATCHER program then it processes this TLOG data according to business rules or tasks as per POSDM Config .
This will push data to ECC via IDOCs or can push data to BW Cubes as the case may be...
So its the POS data => POSDW TLOG => SAP ECC Transactional data like Billing doc / Art DOC / Acct DOC etc
Or it can be BW Cube data as well. You can jolly welll find these POS Tlog data in Daily Cubes as well.
However worthwhile to mention its quite difficult to read /posdw/tlog via SE16 in POSDM .... as data resides in deep str in this gigantic table...
regards
Amitava

Which speakers system should I choose ??

Hello to all,
Please help to me which speaker system I must buy if I want to link speakers system on my Pioneer DV-690AV dvd player over optical cable. Also I want DTS & Dolby Digital support and Digital Coaxial & Optical.
Thank you...

Can I buy separeted digital decoder box and use with INSPIRE T600 or I must buy hole sound system box with digital decoder box like Inspire GD580?
Can you give me a information which sound system have optical & digital conectors.
thanky you creative team...

How do I find which all system I am logged in from?

How do I find which all system I am logged in from?

Safari -> About Safari menu item

Which NUC system I'm ? MDMP or Ambiguous Blended Code Page or Unambiguous blended code pages ?

Similar Messages

Maybe you are looking for