Which one of these options are better for CDS updation?

Hi,
I was going through the data flow in the outbound direction in NW mobile.
the data object instances in the CDS are updated by 3 means:
1)  DOE triggered
2) backend triggered
3) backend pushes instance to DOE.
which one of these is better.
kindly explain the reason as well.

Hi,
Actually there are only two types of Synchronization types between Backend & DOE,
1. DOE Triggered
2. Backend Triggered
DOE triggered adapters will pull the data from Backend to DOE where as Backend triggered adapters will push the data from Backend to DOE (there are two types in BE triggered, Key push & Instance push).
Backend triggered sync type is always better since the changes have been pushed to the DOE then & there (this can be achieved by event,etc..). So that always DOE & Backend will be consistent & the receivers (devices) will also get the latest data in order to proceed with their day to day activities (i.e. business critical data).
Regards,
Ananth.

Similar Messages

  • Which one external hard drive is better for my G5's FW800 port?

    Hi,
    I use a late G5 under 10.4.11. Last two weeks I used two different Western Digital disks, My Book Studio & My Book Studio Edition II but both of them don't operate well with the FW 800. They conflict with my audio interfaces (FW 400 devices). Only at FW 800. At FW 400 and Usb 2.0 they operate fine.
    Because of this I have to replace the WD disk and unfortunatelly I have two options from the store I bought it. And here is that I want your help please.
    Which one external hard drive from these two is better for my G5's FW800 port?
    Lacie Quadra 1TB External HDD by Neil Poulton or Verbatim Quad Interface External Hard Drive 1TB. Formatted HFS+ for Mac OS?
    I'll very appreciate any answer. Spyros

    Hi-
    I think that looking at your other devices is needed.
    Check out the Mackie troubleshooting guide for one:
    http://www.mackie.com/support/documents/TechFAQno.1.pdf
    Page 8 has specific suggestions regarding firewire and chipsets.
    The same for the Presonus:
    The firewire ports on a Mac (FW400 and FW800) run off the main logic board and share system resources. PreSonus interfaces are designed to be run in series with other firewire peripherals. If you are experiencing erratic performance or pops, clicks, and dropouts, daisy-chain your FW400 peripheral from the secondary firewire port on your PreSonus interface. If you must use a FW800 device, it is recommended to purchase a firewire expansion card for your Mac.
    http://support.presonus.com/entries/119100-optimizing-your-computer-for-audio-ma c-osx
    It appears to me that both devices require enough resources that the firewire controller of the G5 may be unable to properly support both FW400 and FW800 transfer rates.
    It appears that the bandwidth requirements of the devices are forcing the machine to drop FW800 in lieu of supporting FW400.
    Both makers suggest use of third party PCI cards for Firewire 800, and it may be that you need additional power to the firewire card to keep up with the I/O and bandwidth demands being placed on the machines by you audio devices.
    You mention that someone told you to not use the Oxford chipset, but the best external drives are all those that have the Oxford chipset.
    It is important to note that not all WD MyBook drives have the same chipset, and few of the WD drives have the Oxford chipset.
    Asrock and VIA are other chipsets for the WD drives.
    VIA is notoriously poor as far as Mac compatibility goes.

  • Which one of these 12volt/car charger for MacBook Pro would you choose..???

    Hi everyone.
    I am looking for a suitable 12volt/car charger, so i can charge my brand new MacBook Pro directly from our caravan batteries via a car/12 volt socket. I dont want to use a inverter, as it draws unnecessary power from the vans batteries.
    I am being cautious as I don't want to use a product that is not 100% compatible here in Australia and might void the warranty in any way.
    I can not find anything suitable manufactured by Apple but I have found many 3rd party alternatives, ranging from approx $50 up to a couple of hundred.
    Has anyone had any experience with any of these products.
    1...$149.95 HyperMac Pure DC Car Charger for Apple MacBook
    http://www.hypershop.com/HyperMac-Pure-DC-Car-Charger-for-MacBook-p/mbp-car.htm
    2...$60.00 The NEW Mikegyver® Power Travel Kit Macbook Magsafe DC car / airline adapter. This one has some great reviews.
    http://mikegyver.com/IdeasnProducts/Macbook-Car-Charger-Adapter/
    3... $119.99 MagSafe Home/Office/Auto/Air Adapterfor MacBook & MacBook Pro
    http://eshop.macsales.com/item/Micro%20Accessories/APL125001/%20.
    4... $49.99 85W Mobile Power Adapter for Apple MagSafe equipped MacBook Pro 15"
    and MacBook Pro 17" Models.
    http://eshop.macsales.com/item/Other%20World%20Computing/ADPTMSC85/
    Thanks for your help in advance

    Hi Carl, Thank you for your help. I am still none the wiser which one to pick. You say they are not equivalent, but don't they all do the same job. I never was any good at joining the dots, my spelling is shocking and I really wouldn't know a technical error even if it was starring me in the face.
    Have a good one.

  • Which one is best option RAC 10g or oracle 11g RAC for certifiction point ?

    hi ,
    which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
    can any one detail difference between above 2 options?
    Regards,
    A.Anwar

    A. Anwar wrote:
    hi ,
    which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
    can any one detail difference between above 2 options?The main difference is: Oracle Lifetime Support
    Premier Support Ends
    Oracle 10g R2 - Jul 2010
    Oracle 11g R2 - Jan 2015
    Extended Support Ends
    Oracle 10g R2 - Jul 2013
    Oracle 11g R2 - Jan 2018
    http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
    Oracle 10g R2 is getting unsupported.

  • Which options are available for Encryption of data in Standard edition

    Hi,
    We are implementing a DMS at one of our client location.
    We are using SharePoint standard edition to implement DMS and also the SQL version is Standard edition.
    Please let us know what options are available for encryption in Standard SQL version.
    Regards,
    Mohammed Khateeb

    You can use cell-level encryption by the various EncryptByXxxx function. But that assumes that you are writing the SQL code yourself, and you seem to have Sharepoint. Maybe you should ask in a Sharepoint forum what is possible in the realm of Sharepoint.
    It also helps if you have an understanding of why you want to encrypt. That is, what do you want to protect yourself against?
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Which JVM and APIs are better for Palm application development

    Hi All,
    Any body tell me which JVM and APIs are better for palm device application development. A want to create a good GUI based application on Palm.
    Please suggest me.
    Thanks
    Jack

    hi jack...
    You can use ibm's wsdd(websphere device developer) as plugin to wsad(websphere application developer) for developing web applications which can be run on palm devices. It uses j9(ibm's implemention of jvm).
    thanks...

  • How does one manage these new render setting for previews?

    I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video.  Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
    I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor? 
      

    Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
    These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
    “As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
    ·        The "Watchout"  playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
    ·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
    ·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
    Thanks for your help!

  • In which table system change options are set

    In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

    Joe,
    Below link & sap notes may be useful.
    http://www.saptechies.com/how-to-activate-the-img-change-log/
    388691 Cross client customization, system change options
    184586 - System change option and BW
    Thanks
    Sushil

  • My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by hoster, so they should work. Can anyone help me, for these forms are crucial for my business.

    My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
    Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.

    Hi Ingo,
    Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
    Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
    - Abhishek Maurya

  • HT1320 How do I unfreeze my iPod classic? None of these options are working!

    How do I unfreeze my iPod classic? None of these options are working!

    What do you mean none of these options? What have you tried so far? Are you referring to the 5 R's described here: http://www.apple.com/support/ipod/five_rs/classic/
    B-rock

  • HT5503 ...why cant i update the software on my phone!! i hav an iphone 3gs, the option in "general" for "software update" isnt there? can i do it through the computer instead?

    i hav an iphone 3gs, the option in "general" for "software update" isnt there? can i do it through the computer instead?

    What you are looking for is only available for iOS 5 and above.  You will need to connect your iPhone to a computer and update through iTunes as always.

  • I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    Download it from https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • Anyone having same prob as me? I updated to 8.1.3 and lost photo stream - all settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed with the 8.1.3 update

    Is anyone having same prob as me? I updated to 8.3 and lost photo stream on my photos - all my settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed from the phones with the 8.1.3 update but it is not mentioned anywhere on Apple's site

    found it
    http://gimutaowebsolution.com/missing-photos-on-ios-8-3-or-8-x/

  • Which one of these Google Talk apps do you think is better for iPod Touch?

       Who's maybe tried both of these Google Talk apps out or if not, which one would you rather prefer?
       One just does Google talk IM text, chat
       The 2nd one does the whole works, (phone, text, chat, IM, video calls etc, etc.
       http:/https://itunes.apple.com/us/app/tap-to-chat-gtalk-version/id437791534?mt=8
       or this:
       https://itunes.apple.com/us/app/vtok-google-talk-video-calls/id421102042?mt=8
       for your iPod Touch!

       The first link doesn't work in above post. Try this again!
       https://itunes.apple.com/us/app/tap-to-chat-gtalk-version/id437791534?mt=8
       or this:
       https://itunes.apple.com/us/app/vtok-google-talk-video-calls/id421102042?mt=8
       for your iPod Touch. Need some opinions! or anyone who's tried these out.

  • Which Bluetooth headphones are better for iPhone 4?

    Hi.
    I did a search on the forums looking for recommendations on a good pair of wireless bluetooth headphones to use with my new iPhone 4, but didn't find any thread for actual users to review or recommend brands or so...
    So, I wanted to know if do you use wireless headphones for music/video playback? Which brands/models are better in your opinion? (either with or without calling functionality).
    Thanks in advance!
    Message was edited by: Carlos Garcia1

    I've taken a look at my apple online store (Spain) and found this set:
    Altec/Lansing BackBeat 906
    They look like a nice option as well, very similar to the Motorola S9 HD, (and also a little cheaper)
    Do you guys have these Altec headphones? Any reviews and/or comments?
    Thanks!

Maybe you are looking for