Which Oracle db version supports partitioning
Hello Everyone reading my post,
I'm a student who needs to work on a partitioned table. I've tried several versions of oracle db but each time I get error ORA-00439: Partitioning feature not enabled.
It would be great help if you can guide me to the right version that supports partitioning.
Thanks
Maran,
I posted the exact version, because there is a huge difference between 8i and 8.0, and a not so huge difference between 7.3 and 8.0. The only difference is mainly partitioning.
This is why an instructor at Oracle University (I won't mention his name, because he is still there), stated internally they labeled 8.0 as Oracle 7.4.
Quite frankly, partitioning would have called for a major redesign of the datadictionary, but Oracle didn't do that, and more or less 'mangled' partitioning in.
He also stated 'some say they did change the rowid, to make sure Forms 3.0 wouldn't work against the new version'. Forms 4.5 was long out then, but apparently no one upgraded
So no insinuation, no flame, no sneer, was intended, not at Alok, not at anyone.
I only posted it, because Alok was incorrect, and because of the difference between various versions.
Consequently, I don't understand the comment of N. Gasporotto.
I think it is quite probably changing the rowid was done with a hidden agenda.
Why would Oracle not try to force people to upgrade?
Oracle is a commercial venture, and Larry has to pay his boats somehow ;)
I'm sorry if I caused any confusion, it was not intended.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
W2k8 is 32-bit,which oracle 10g version should be installed?
Hi everyone,
I am a new DBA. Now I will install Oracle 10g on w2k8. I found w2k8 is 32-bit system, i am wandering which oracle 10g version I should install?
Thanks!Go to http://www.oracle.com/technology/software/products/database/index.html
Note that Windows 2008 explicitly is listed against 11.1.0.7
Therefore, you can assume that 11.1.0.7 is the first that definitely supports W2008.
And you can assume that anything older than that line is definitely not supported.
And if it is not supported (as is the case for 10g), you can assume that you will run into some kind of problem either during installation or (worse) at some unknown time later.
You can probably find some workaround to make it appear to work. Which is fine ... it's your job. (At least until it stops working.) -
Which R/3 version supports LO extraction?
Which R/3 version supports LO extraction?
According the oldest SAP Note that I found:
115811 - Setting up the LIS environment in OLTP is not possible
thsi was introduced in BW Service API of R/3 release 30D. -
Oracle Database version support
My manager was asking about our plans to upgrade our current Oracle database version (10.1.0.4). We're currently humming along nicely, so I thought that I'd use an Obsolescence Policy as a guide to push us forward. I looked all over Metalink, but this was the only document I could find, which was a hyperlink from another Metalink document, which advertised it as a 10g Product RoadMap:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=312470.1
It's not very helpful in that regard, plus it's from Nov 2007. Does anyone have a link to some more current documentation? I really appraciate your help.
--=ChuckPl also see these MOS Docs
209768.1 - Database, FMW, EM Grid Control, and OCS Software Error Correction Support Policy
742060.1 - Release Schedule of Current Database Patch Sets
HTH
Srini -
Oracle Report and Oracle Form Version supported by Oracle Enterprise 10gR2
Dear support,
Would you please advise me on the version of the following product supported by Oracle Enterprise Edition 10gR2?
1. Oracle Report
2. Oracle Form
Thanks.
Kan FokHi,
I think Reports 6i has the option to create character delimited output, which can be used for Excel imports. In Reports 9i the ability to add a mime type that opens Excel directly was added
Frank -
Which SQL Developer version is compatible with which Oracle db version?
Does anyone have a link to the docs that detail which versions of SQL Developer support which versions of the Oracle database? We're looking to upgrade our 10.1.0.4 database to 11gR1 or 11gR2, and we're wondering if we'll need to upgrade out SQL Developer 1.5.4 installation as well.
Thanks,
--=ChuckDoes anyone have a link to the docs that detail which versions of SQL Developer support which versions of the Oracle database? We're looking to upgrade our 10.1.0.4 database to 11gR1 or 11gR2, and we're wondering if we'll need to upgrade out SQL Developer 1.5.4 installation as well.
Thanks,
--=Chuck -
Which Oracle Workflow version required for Oracle Warehouse Builder 92
Hi,
I have Oracle Database 9i and OWB 9.2. I want to install Oracle Workflow, which version is required for OWB 9.2.
Help required from anybody in this matter.
Thanks
LiyakatGoodmorning Liyakat,
Simply get the latest version, 2.6.3 that is for my platform.
There's an interesting and informative document on that on Mark Rittman's site, check the following link: http://www.rittman.net/archives/000770.html
Good luck, Patrick -
Intel Xeon Windows 64 Bit : Which Oracle software Version?
Hi!
we have Windows Enterprise Server SP2 <b>64 bit</b> with <b>Intel Xeon</b> processor and would like to install the SOLMAN with Oracle.
According to the original Oracle-DVD from SAP there are only three possible choise entries:
a) AMD64
b) IA64
c) I386
But I have the feeeling it should be one choice like "x86" is not?
Which one should we apply?
The I386 can be installed indeed, but we are getting the error during the SAPINST-Installation "Oracle software not installed". I thought this entry was only for 32 bit?
The IA63 Bit can not be installed.
<b>Only the AMD64 we could install. But the question is, whether AMD is the same to Intel Xeon?</b>
Thank you very much for any useful help/comments...
regardsHi,
You have still a "32-bit" platform ONLY.
1. Intel 64 is not AMD64, they are different. AMD64 implementation is only meant for AMD processors although the family is 64T support, full implementation is NOT done.
2. Your assumption of x86 is correct. You MUST go for I386 option ONLY !!!
3. Error of "Oracle software not installed" is different and you should not relate it to hardware. It is only for the environment variables and registry.. This will happen even in normal case..
Once again, you should NOT use AMD64 and IA64.. Try only with I386 option..
BTW, firstly, whats the reason for you to choose a 64-bit o/s that are meant for 64 - bit Itanium systems... CHoose a operating system that fits and will work with SAP optimally!
You should only choose a 32 Bit Enterprise edition of operating system. Windows Server 2003 R2 well works in your case and should be your choice !!
Finally your combination should be -
1. Windows 32 Bit Enterprise Edition R2 ---> O/s
2. i386 DVD -
> SAP/ Oracle DB
Hope this helps, revert for queries
Cheers,
Senthil -
Any one using 11g DB with Oracle B2B?which oracle DB versions are suported
we're on 10.2.0.3.0 and are in middle of DB upgrade , wanted to check if 11G is right option or just go to 10.2.0.4.0
Thanks,
KalyanHi,
I would recommend you stay on the curent patch set. Application Server 10.1.2.3 with database 10.1.0.5 and the latest Oracle B2B patch.
The certification matrix indicates the highest DB version, in this context, is Oracle Database 10g R2 (10.2). Please verifiy on metalink.
regards,
Jeff
P.S. The REPCA utility will not allow you to install into a 11g DB. -
hi experts
which Oracle EL version should one use for installing Oracle Grid Infra
Oracle Linux Release 5 Update 7 Media Pack or Oracle Linux Release 5 Update 8 Media Pack
thanksAccording to previous threads, the oraclelasmlib package for el6 should be released soon.
In the meantime, I had no trouble with the following:
<pre>
wget http://download.oracle.com/otn_software/asmlib/\
oracleasmlib-2.0.4-1.el5.x86_64.rpm
yum -y install oracleasm-support
yum -y install oracleasmlib-2.0.4-1.el5.x86_64.rpm
</pre>
Verify you have SElinux disabled prior to starting the system -
Oracle DB version for windows(64 bit)
Greetings,
I want to install oracle on my system which has the following properties.
OS:WINDOWS SERVER 2003 Enterprise Edition Service pack2(64 bit)
Processor:Dual Core AMD Opteron(TM)-2.39Ghz
RAM-16GB
Which Oracle 10g version i need to download so that installation and creation of database should go smoothly with respect to the above system configuration.
Thank You All...From the download site:
Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (x64)
Werner -
hi guys,
How can you find which Oracle client version does SAP 4.6D is using to connect with Oracle.
is there any file or Parameter setting available for this.
Thanks.
ChandraHello,
I'm afraid that the answer given by Samrat Dangeti is incorrect.
V$VERSION tells you the version of the RDBMS ( Oracle Database ) not the version of the client used by SAP.
Please, check the following thread on the Oracle Forum where this is being clarified.
How do I check the oracle client version?
Message was edited by:
Fidel Vales -
Oracle client version on application servers
Hi All,
Recently we upgraded Oracle version from 9.2.0.6 to 9.2.0.8 on databa server and oracle client on application & CI server.
But i would like to know which Oracle client version am i running currently on the application server.
Thanks
Regards
SachinHi Stefan,
With the command it displayed as follows:
#strings libclntst9.a |grep "XML Schema Processor version"
Oracle XML Schema Processor version 9.2.0.8.0 Production
Thanks
Regards
Sachin -
Which sql developer version will support oracle 8.1.7
hi
which sql developer version will support oracle 8.1.7 or is it necessary to use plsql developer to connect to database (oracle 8.1.7)Hi,
SQL Developer version 1.2.1 is able to connect to 8.1.7 with limited functionality (prepared reports and browser for objects could not work)..
Next version (tested with 3.2 64-bit) of SQL developer could be "hacked" to connect to 8.1.7 by simply copy file C:\oracle\product\10.2.0\client_1\jdbc\lib\classes12.zip from Oracle client prior 11
into appropriate jdk\jre\lib\ext folder. -
Oracle UCM Installation Supported Versions
I am installing Oracle UCM suite in Windows 7 64bit-OS, can anyone say which is the release version to download the following products
oracle DB version?
RCU version?
UCM version?
Experts please advice as there is a confusion with versions and releasesIt is not supported on Win 7
http://www.oracle.com/technology/products/content-management/cert/oracle_ecm_11gr1_(11.1.1.x)_certification_matrix.xls
Why not create a VM using a supported OS?
Tim
Maybe you are looking for
-
Hi, I am looking for a possibilty to dynamicaly generate a hyperlink on a text in UIX entered by a user which would point to another page. Say, the user enters 'Product x, <link or some other custom string> product group x1' in edit page and after Su
-
Supplier Price in Material Master
Hi, Is there a field in Material Master when the supplier proce can be uploaded? We would like a place to store a suppliers current price against a material. Currently this data is stored in a spreadsheet, so weu2019d also like to know the possibilit
-
Some of my album artwork covers have dissapered how do i get them back?
some of my album artwork covers have dissapered how do i get them back?
-
Got a used G4 off Ebay but for some reason the letters and numbers wont type. It changes volume and brightness with other keys including the caps lock...but cant type text. Is it stuck in a shift or command key??
-
Hello I had BT broadband installed on 16th Aug and expected BT sport (free HD as I ordered before 1st aug) to also be available on my SKY platform, it is not. I have rung BT every day and speak to 3 or 4 people each time who pass me between departmen