Which OS for mobile client?

I seem to be getting conflictng information. Around this forum I get the impression that any machine with a JVM will do. But when I look at things like <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/23c24ccb0e4e85e10000000a422035/frameset.htm">the sap help</a> I see only Win32 and WinCE. Oss note 720225 only mentions WinCE and pocket PC.
Because the new <a href="http://www.nokiausa.com/n810">Nokia 810</a> runs linux and is very cute. It would be even cuter if it was deductible as a business expense

Hi
SAP MI Client Support Windows based OS only and not Linux. It supports Win32 and WinCE based devices. Win32 devices supported are Vista, XP and 2000 OS while WinCE devices supported are PPC 2003, WM 5.0 and WM 6.0. What note 720225 is the JVM required for WinCE devices. For Win32 the standard SUN JVM is to be used.
Hope this helps.
Best Regards
Sivakumar

Similar Messages

Local admin priveleges required for Mobile Client

Anyone overcome a problem with the mobile client requiring local admin priveleges to run?

hi peter,
pls see the below urls.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/953928ff-0701-0010-43a0-b18b5e6ffeed
The Passwords Control Panel has a "Remote Administration" tab that
   works only if you have networking installed. If you use a central
   server, you can assign administrative privilege to a SUPERVISOR or
   Domain Admin.
   First, install File & Print Sharing for either MS networks (for a pure
   Win95 or NT domain network) or NetWare (For NetWare networks). If you
   use FPS for NetWare, keep SAP advertising OFF. In addition, install
   the Remote Registry service from Network Control Panel, as a Service
   (in ADMINNETTOOLSREMOTREG on the CD-ROM) on the remote machines. You
   can do this (and even enforce this) when you install Win95 as well.
   Now, if the workstations use User level security (highly
   advisable on NT Domains and NetWare networks), Setup will
   automatically enable remote administration for ADMIN and SUPERVISOR
   (NetWare) or DOMAIN ADMINS (NT Domain). If the stations use passwords
   instead of user lists (Share level security), or you don't have a
   central server, you will need to manually enable Remote Administration
   and supply a password to each station. Remote Administration settings
   will differ with each type of network client installed.
   Once done, you (the administrator) can control computers via Network
   Neighborhood. Right-click on any Win95 station and select
   "Properties". You will see a "Tools" tab that lets you edit the
   Registry, view network activity, or even browse the hard drives, on
   the remote computer. REGEDIT and POLEDIT also works on these stations.
   Of the tools listed, Remote Registry service is the biggest service
   (250 KB). To free up memory so you don't slow down the machines, check
   out How to Prevent Random Hard Drive Access, which also frees
   lots of memory for these services.
7.6.3.1. ...on a Windows NT network?
   Install FPS for MS networks, install Remote Registry service, and
   enable User level security. Remote Admin privileges are
   automatically given to anyone in the Domain Admins group on the domain
   controller. Re-boot. Then, go to another Win95 station, log in as
   Administrator (or anyone else in Domain Admins) and get properties on
   the remote station from Network Neighborhood.
   WARNING: This service will allow you to remotely edit an NT Server's
   Registry! I was able to get in to several (but not all) Registry keys
   on my own NT server by logging in as a member of Domain Admins. I'd
   hate to think what could happen to my poor server if someone ran
   REGEDIT on this network with malicious intent!
   WARNING: Remember the NetWare C$ bug? It's back, this time in FPS for
   Microsoft networks! Now if you perform a Remote Admin session on a
   Win95 station and view its hard drives, the Admin shares
machinec$) remain active, available for read-only viewing when a
   user types
machinec$ from Start Menu/Run. This bug may have always
   been around, but I suspect it emerged with Service Pack 1.
7.6.3.2. ...on a Peer Win95 network?
   You don't need to install Remote Registry service on the workstations
   to use peer to peer remote administration. You only need a file and
   print sharing service. When you use the Admin tools, the target
   computer will prompt you for a password.
   Be sure to set this password on all the workstations you want to
   administer remotely.
   NOTE: According to the Remote Registry readme files, Remote Registry
   service only works if you use User Level Security from a central
   server.
7.6.4. ...user level access?
   User Level access spares us the potential of lost passwords and
   multiple, security-killing, cached passwords, because the passwords
   remain on the central security provider. You need only log in once and
   type your password once, and you have access to any resources shared
   on the network that have you on their access list.
   Enable User Level security from Network Control Panel, in Access
   Control. Pick a security provider (the name of an NT domain, NetWare
   server, or other central server if your client/service software allows
   for it). The next time you re-boot, all your share requesters and
   password requesters will have user list requesters in their place. You
   could also enforce user level security via system policies.
   If the server is a NetWare 4.x server, you will need to set a Bindery
   context on it. This will allow all NDS clients access to any Win95
   stations sharing resources via FPS for NetWare.
   Unusual combinations to avoid:
FPS for MS networks, using a NetWare server as security provider
       (WFWG stations can't get access then! Win95 machines could get
       access, however)
FPS for NetWare, using an NT server as a security provider (Quite
       impossible, as the NCP server doesn't recognize NT security)
FPS for NetWare, using Share level security (It won't let you; NCP
       servers don't allow separate logins)
7.6.5. ...server-based setup and MSBATCH.INF
thanks
karthik

Best Azure Website Service for mobile clients

Which Azure Service should i use for hosting a website which is going to be used only from mobile clients. Secure communication between website and client is important as well.

Hi,
I would suggest you try Azure Mobile service, Windows Azure Mobile Services makes it incredibly easy to connect a scalable cloud backend to your client and mobile applications. It allows you to easily store structured data in the cloud that can span
both devices and users, integrate it with user authentication, as well as send out updates to clients via push notifications. See more at:
http://azure.microsoft.com/en-gb/documentation/services/mobile-services/, if you have some issues related to Mobile service, please move to azure Mobile service forum for a better support:
https://social.msdn.microsoft.com/Forums/azure/en-US/home?forum=azuremobile
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to increase load time for mobile client platform on handhelds?

Hello Experts!
I have developed an application for my mobile client on handheld, but i have a problem with performance, my problem is on load of client, elapsed time to load this ambient is 25 seconds, somebody have a solution to increase a performance to load Mobile client on handhelds?
Regards
Ronaldo Rampelotti.

I was given this a long time ago back when I was developing on SP3
Not sure if they are all valid or more have been added.
I thought I posted this awhile ago, but can't find it maybe it got deleted.
These CSS properties are ALL or NONE, you cannot specify by View or by some class id.
I think there are suppose to be improvements in next version of MI client.
Name of the property
default
     stylesheet.default.backgroundcolor
     stylesheet.default.foreground
     stylesheet.default.font.name
     stylesheet.default.font.size
     stylesheet.default.height
     stylesheet.default.bordercolor
brandingarea
     stylesheet.brandingarea.backgroundcolor
     stylesheet.brandingarea.bordercolor
     stylesheet.brandingarea.font.size
     stylesheet.brandingarea.foreground
     stylesheet.brandingarea.height
     stylesheet.brandingarea.brandingtext
button
     stylesheet.button.backgroundcolor
     stylesheet.button.font.size
     stylesheet.button.foreground
     stylesheet.button.height
label
     stylesheet.label.backgroundcolor
     stylesheet.label.font.size
     stylesheet.label.foreground
     stylesheet.label.height
caption
     stylesheet.caption.backgroundcolor
     stylesheet.caption.font.size
     stylesheet.caption.foreground
     stylesheet.caption.height
inputfield
     stylesheet.inputfield.backgroundcolor
     stylesheet.inputfield.font.size
     stylesheet.inputfield.foreground
radionbutton
     stylesheet.radiobutton.radiobutton
linktoaction
     stylesheet.linktoaction.backgroundcolor
     stylesheet.linktoaction.font.size
     stylesheet.linktoaction.foreground
     stylesheet.linktoaction.height
statusbar
     stylesheet.status.backgroundcolor
     stylesheet.status.errorcolor
     stylesheet.status.messagecolor
     stylesheet.status.warningcolor
table
     header
     stylesheet.table.header.backgroundcol
     stylesheet.table.header.foreground
     stylesheet.table.header.height
     stylesheet.table.header.font.size
     content
     stylesheet.table.content.backgroundcolor
     stylesheet.table.content.foreground
     stylesheet.table.content.height
     stylesheet.table.content.font.size
     footer
     stylesheet.table.footer.backgroundcolor
     stylesheet.table.footer.foreground
     stylesheet.table.footer.height
     stylesheet.table.footer.font.size
imagebutton
     stylesheet.imagebutton.backgroundcolor
     stylesheet.imagebutton.font.size
     stylesheet.imagebutton.foreground
image
     stylesheet.image.backgroundcolor
I don't know about the client arguments, usually that was a guess\try and find out.

Add user for mobile client

Dear All,
I'm trying to add a new user into my site definition in transaction SMOEAC. Already 3 employees are associated to this site; I want to add a new one.
I know that I should create a new subscription with Publication type User by employee, but when the wizard starts, I can't find the publication "User by employee" in my available list.
My user is already created and associated to a BP employee; it exists in the table SMOUSERS in CRM server, but not in my laptop. How is possible to update only this table in my laptop data base with the CRM one?
Could you help me, please?
Thanks.
BR,
Andrea.

Hi,
how and when did you create the existing 3 user subscriptions for this site?
Is the user publication still in standard version or has it been changed to bulk replication mode?
Is there any other (intelligent) publication missing in the wizard list?
Regards,
Wolfhard

What functionality is available with sp 6 for CRM Mobile Client 7 eph1

Hi
Sp 6 has been released for CRM Mobile Client 7 eph1. I know sp 6 provides support for mobile client on windows 8 . Does it contain any other functionality?
Regards
John

Hi John,
All information regarding this release can be found in SAP Note 1799687
Regards,
Gervase

Auto Discover Mobile Client Connectivity issue.

I am currently working on getting mobility working for our lync environment. I have followed online articles for setting up the mobility service and while I have not got a true reverse proxy put in place yet I have a question regarding the autodiscover.
When I go to https://lyncdiscover.ourdomain.com/autodiscover/autodiscoverservice.aspx/root/sipuri=[email protected]
I get the following results
{"AccessLocation":"External","Root":{"Links":[{"href":"https:\/\/lyncfe-v01.ourdomain.local\/Autodiscover\/AutodiscoverService.svc\/root\/domain","token":"Domain"},{"href":"https:\/\/lyncfe-v01.ourdomain.local\/Autodiscover\/AutodiscoverService.svc\/root\/user","token":"User"}]}}The problem is that is our local internal URL not the external URL. I believe the setting comes from the Topology Builder under the Standard Front End Server for External web services FQDN as that is what is set there. My question is should that be changed to the FQDN of the edge server or the FQDN of the reverse proxy server? Also should that be the public ourdomain.com or remain the internal ourdomain.local?I hope this makes sense. I am just taking this piece by piece as I was hoping to get my android phone working internally on Wifi at the very least.Also for testing purposes I just pointed our firewall and setup nat from 80 -> 8080 and 443 -> 4443 to test that the external website was working and it is that is how I was able to get the auto discover information. I know this is not secure or ideal I am simply taking this one step at a time to ensure I get this working properly.Thank you for everyone's help.
KK

Ok update on my progress.
we updated our UCC certificate that we bought for our edge server. That certificate had the following in it
sip.ourdomain.com
webconf.ourdomain.com
we added
dialin.ourdomain.com
meet.ourdomain.com
lyncdiscover.ourdomain.com
I left the External Web Services FQDN as lyncdiscover.ourdomain.com
I then put that cert on the Reverse Proxy server. I then tested using testconnectivity.microsoft.com and the autodiscover test and everything passed. This is the good news.
Now the bad.
When I run the connectivity test if I manually select the server and put in sip.ourdomain.com and choose port 5061 the test passes but if I choose port 443 which apparently the mobile clients use as I do not see a spot to change that at it fails stating
that
The SSL certificate failed one or more certificate validation checks.
The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Elapsed Time: 192 ms.
I checked the External Cert on the edge server and sip.ourdomain.com and webconf.ourdomain.com are listed.
The Edge Pool has been configured to have SIP Access, Web Conf service and A/V service all point to sip.ourdomain.com using ports 5061, 444, 443
Can someone point to me what I have setup incorrectly?
This seems like I am very close to actually having this working. Almost like I can see the light.
Thank you,
KK

CRM Mobile Client Technology Documentation

Hello All,
Watch this space for information on Mobile Client Technology documentation.

Mobile Client Technology documentation
Mobile Client Technology (mySAP CRM), a part of SAP NetWeaver Mobile, is client technology designed for Microsoft Windows-based, occasionally server-connected CRM field applications. These applications offer a rich function set, such as SAP CRM Mobile Sales and SAP CRM Mobile Service.
With every support package release of Mobile Client Technology, we provide the following supporting documentation:
 Release Note
 Upgrade and Installation Guides
 Help Portal/ SAP Library content
 Limitations Note
 Collective Note
 API Documentation integrated with the application
Mobile Client Technology (mySAP CRM), a part of SAP NetWeaver Mobile, is a client technology designed for Microsoft Windows-based, occasionally server-connected CRM field applications. These applications offer a rich function set, such as SAP CRM Mobile Sales and SAP CRM Mobile Service.
With every support package release of Mobile Client Technology, we provide the following supporting documentation:
 Release Note
 Upgrade and Installation Guides
 Help Portal/ SAP Library content
 Limitations Note
 Collective Note
 API Documentation integrated with the application
First Point of Access
The following quick link under the Service Marketplace is the first point of access to the customers: http://service.sap.com/nw-mobile.
Path:
Click on SAP NetWeaver → SAP NetWeaver in Detail → People Integration → Multichannel Access → SAP NetWeaver Mobile → Mobile Client Technology (mySAP CRM) → Media Library.
Mobile Client Technology (mySAP CRM) > Medial Library contains:
1. Link to access the TICM guides (installation and upgrade guides)
2. Presentations on the Mobile Client Technology.
3. Other Technical Documentation and Guides (Performance Modelling Guide, User Management Usage Guide, Transport Component Guide etc...)
4. Link to access the Documentation catalog.
Documentation Catalog
The doc catalog lists and provides a description of all the types of documents that are provided for Mobile Client Technology and also points to the locations from where they can be downloaded.
The link to access the doc catalog PDF is provided in the nw-mobile area - http://service.sap.com/nw-mobile
Locating online help on the Help Portal:
1) Access http://help.sap.com
2) Click on Documentation → mySAP Business Suite → SAP Customer Relation Mgmt → English
3) Expand Data Exchange and Mobile Technologies → CRM Mobile Technology
4) Click on the online help that you need to access.
*Locating TICM Guides on Service Marketplace:
1) Access http://service.sap.com/instguides
2) Click on SAP Business Suite Applications → SAP CRM → SAP CRM 2005 → CRM Mobile (Laptop)

Which network ip address will my mobile clients receive

Hi folks
I have an AP in my production site which has a vlan configured as native vlan and the ssid related to this vlan is being used for communication with other wireless bridges. The BVI interface of this AP is ofcourse having an IP of the native vlan.
Now I have a requirement of configuring this AP with mobile clients and these mobile clients should get IP addresses from the DHCP server. The IP address that these mobile clients should recieve is from a network which is different from that of the native vlan.
I know that I can define this new vlan in the APs as wellas everywhere in the network aswell as create a SSID binded to this VLAN, But I had this doubt in my mind if the client will really take the IP of the VLAN which I want or it will try to get an IP address of the VLAN to which the BVI interface belongs i.e. the native vlan.
Note:- The Client will be associated to the AP through the desired VLAN and not through the SSID of the native vlan.
I wanted to have your expert opinion before rolling this out in production.
Thanks

Given that you are using one DHCP server with multiple scopes
AND
Given that your multiple VLANs & SSIDs trunk (802.1q) to a router to different subnets (each of which would need an "IP Helper" on the client-side interface)
Then the DHCP server should recognize which scope to deliver based on the VLAN that the request is received from.
Good Luck
Scott

Simulating Handheld Scanner for NW Mobile Client

Hi all,
we are developing a handheld transaction using NW Mobile 7.1 and the NW Mobile Client. The handheld transaction will be using handheld scanning functionality to input data into input fields (e.g. scan the material number). To test the scanning specific logic we would have to load the transaction onto the handheld to verify the logic works. We would have to do this for every change we do which is very time consuming and cumbersome.
Does SAP (or anybody else) provide a scanning simulator that can be used with the NWDS while the transaction is being developed (like you can simulate the transaction in the NWDS simulator). Would there be any specific hardware or software required?
Thanks in advance for your help.
Wolfgang

Hi Wolfgang,
Just follow the path in the link mentioned in my last reply.
Peripheral Input/Output Services-> Peripheral Support Emulator Actions -> Peripheral Input/Output Emulator -> Scanner Peripheral Panel.
You need to create the barcode data to be used.
Then when running they just need to press the scan barcode button in the toolbar.
A scan event will be triggered returning the selected barcode data to the application.
Thanks & Regards,
Abhijit

ADF mobile Client App: Issue about using db sequence for populating row_id

Hi,
I'm working on an ADF mobile client app POC project. In the mobile app, new record can be created, the column type for row_id is VARCHAR2(15), I used the db sequence created in MC db, converted the seq number to a string, then set row_id via initDefaults method.
The new records are created and row_ids are set with the proper sequence numbers when first time launching the client app in blackberry simulator. But if I exit the app and re-launch the app again, I got net.rim.device.api.database.DataTypeExpection when trying to create a new record.
Could anyone please help me and let me know what could cause this issue? What should be the proper way to populate the row_id? Appreciate your response in advance!
Jdev/ADFMobile extension version:
11.1.1.4.0 build 5860
mobile server version:
10.3.0.3
blackberry version:
BlackBerry JDE 5.0.0
BlackBerry Smartphone Simulators 6.0.0.141 (9800)
Code:
public class SOrgExtEOImpl extends EntityImpl {
protected void initDefaults() {
super.initDefaults();
SequenceImpl seq = new SequenceImpl("S_SIEBELMOBILE_S_ORG_EXT", getDBTransaction());
populateAttributeAsChanged(ROWID1, seq.getSequenceNumber().toString());
Log:
First time launching the MC app:
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 14:58:13.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 14:58:13.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to 73501
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.CreatedBy at index 2
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to 1-11ZQ
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.LastUpdBy at index 4
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to 1-53Y
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.BuId at index 5
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to 1-1DG
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.AccountAddressFKAssoc not found in cache, so
loading it from XML
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.ActivityAccountFKAssoc not found in cache, so
loading it from XML
[FINE - adfnmc.bindings - BC4JIteratorBinding - notifyRowInserted]
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - rowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - notifyRowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - RangeBindingImpl - rowInserted] AccountAddressView1
[FINE - adfnmc.bindings - RangeBindingImpl - notifyNewElement] AccountAddressView1, index:0
[FINE - adfnmc.ui - BBTable - newElement] relativeIndex = 0
[FINE - adfnmc.bindings - RangeBindingImpl - setVariableIndex] Begin, AccountAddressView1, listener: oracle.adfnmc.component.ui.BBTable$1
[FINE - adfnmc.bindings - SimpleContext$Variables - setVariable] Setting variable "row" to expression #
{AccountPageDef_AccountAddressView1_rowAlias}
[FINE - adfnmc.ui - BBOutputText - endInit]
Re-launching the MC app:
INFO - adfnmc.bindings - BC4JOperationBinding - execute] Preparing to execute OperationBinding id:'CreateInsert'
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 15:08:35.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 15:08:35.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[INFO - adfnmc.ui - ErrorHandlerImpl - reportException] BindingContainer: AccountPageDef, exception: oracle.adfnmc.AMCJboException
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] [oracle.jbo.server.SequenceImpl$TableSequenceImpl.retrieveSequenceParamsFromDB]
oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for sequence S_SIEBELMOBILE_S_ORG_EXT
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] oracle.adfnmc.java.sql.SQLException:
net.rim.device.api.database.DataTypeException:Datatype mismatch
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] Unable to retrieve String at index 2
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException]
[FINE - adfnmc.ui - MessageBox - show] message=oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for
sequence S_SIEBELMOBILE_S_ORG_EXT
[FINE - adfnmc.ui - MessageBox - show] oracle.adfnmc.java.sql.SQLException: net.rim.device.api.database.DataTypeException:Datatype mismatch
[FINE - adfnmc.ui - MessageBox - show] Unable to retrieve String at index 2

>
>
using 10gR2 on Sun-Solaris. Getting consistently "db file parallel read" over 35 ms as an average wait for the past few months. No performance issues as such.
Using RAID 1+0. DB Size is 2 TB. Transactions are OLTP/Batch
Is this metric high or normal. How to justify that..
Looking at your results it's not really possible to say.
db file parallel read is a request for a number of randomly distirbuted blocks, and the time for a read is the time for the last block of the set to be returned.
Without knowing how many blocks are being requested at a time you can't really determine what constitutes a reasonable time. Given that you say OLTP + Batch, and have a large volume of scattered reads, it's quite possible that you have some queries on the Batch side doing very large index range scans - which would allow for some very large db file parallel reads.
I take it from the use of statspack that you're not licensed for the diagnostic and performance packs; it would be easy to query v$active_session_history to get some idea of the number of blocks per request as this is given by the P2 parameter. As it is. you may be able to get a rough idea by messing about with the various "physical read" numbers in the Instance Activity section of statspack.
Regards
Jonathan Lewis

J2me Mobile client calling method which return byte[] java.rmi.MarshalExcep

J2me Mobile client calling method which return byte[]
java.rmi.MarshalException: Expected Byte, received: SGVsbG8gV29ybGQ=
WebService1_Stub ws=new WebService1_Stub();
try {
String s=ws.getStringHelloWorld();// works fine
byte s[]=ws.helloWorld(); // error java.rmi.MarshalException: Expected Byte, received: SGVsbG8gV29ybGQ=
}catch(Expception e){
ex.printStackTrace();
}This same ws working fine in java standalone application please guide me what can be a problem ??
Regards
Haroon Idrees

clear your app. server logs ( or make copies of them if will you need them) and redo the whole process. check out the logs and you should see some reason for this. i do not know if Borland's logs will turn out helpful, but it did help me out in certain other situations.

Mobile client for windows 64 bit

Is there a mobile client that works on windows 64 bit?
just been asked to test out our app on a windows 7 laptop and it fails straight away with UnsatisfiedLinkError: c:\mobileclient\bin\oljdbc40.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Cannot see anything in the oracle downloads, but they are in Berkeley mode now rather than the traditional stuff.

Not a proper solution, but i have found a work around for the problem
The windows 7 64 bit machine had java 1.6.0_16 installed as the default (we have a problem with a change to the toDate function tightening things up in 1.6.0_18 causing exceptions in our 3rd party software).
We also had an application that was bundled with its own JRE 1.6.0_06 on the machine and when i switch the application code to point at that JRE everything works fine. Not a java person, but i assume that somewhere between 1.6.0_06 and 1.6.0_16 SUN added true 64 bit support and this requires all libraries to be in line. The older version not knowing anything about 64 bit could cope, but obviously without making best use of the device resources
as we have a work around for the time being, i will probably leave this issue until we start on investigating the migration to berkeley in the new year
Edited by: GaryW on Nov 4, 2010 9:54 AM

Can't change password for mobile user on certain client computers

I have a MacBook Pro that has mobile user accounts. The user accounts are defined in the WGM of my macpro Server. The mobile user account works fine except that after some time I could not change the password on the client computer. I could change it in WGM but then it was not updated on the client. I tried changing the password from the SystemPreferences -> Accounts option as well as from the command line with "passwd". When using the command line passwd it just says "sorry". When using the Accounts option it asks to contact the "system manager".
I called Apple Support. They suggested recreating the mobile user account on the client. I did that, and everything worked fine, including changing passwords on the client. But, after several weeks, I again cannot change the password on the client. I can change it in WGM fine, but again the client is not updated.
It seems that the password database on the client gets confused about user password changing privileges after some time.
To make matters more complicated, everything works fine for another client computer, including changing passwords.
Any suggestions?

This problem was related to the case sensitivity of computer names. I had recreated the LDAP binding to the client computer with the computer name in all lower case
characters. However, when I created the mobile user initially, I had used a mix of upper and lower case characters (the name that shows up upon reverse DNS lookup). Once I re-created the LDAP binding with the original name, everthing worked fine.

JBO-27122 error in ADF mobile client application for blackberry

Hi,
I am trying to develop a simple ADF mobile client application for blackberry. Currently, working only with Blackberry 9700 simulator. I am using the following for development:
- Jdev 11.1.1.3
- Oracle database lite 10.3.3
I have done all the steps as given in the oracle demo. But when I try to run the application in blackberry simulator, the page shows the following error:
ERROR: failed to change page
oracle.jbo.server.DBTransactionImpl.createPreparedStatement: JBO-27122: SQL error during statement preparation. Statement: select po_header_id from po_headers_all where po_header_id=1
[oracle.jbo.server.DBTransactionImpl.createPreparedStatement] Encountered exception executing query on ViewObject: header1
[oracle.jbo.server.DBTransactionImpl.createPreparedStatement] Error retrieving BindingContainer : 'mobile_twoPageDef'
oracle.adfnmc.java.sql.SQLException:
oracle.adfnmc.java.sql.SQLException:net.rim.device.api.database.DatabaseException: select po_header_id from po_headers_all where po_header_id=1 : SQL logic error or missing database
Unable to create/prepare native statement with SQL select po_header_id from po_headers_all from po_header_id=1
Unable to create PreparedStatement with SQL select po_header_id from po_headers_all from po_header_id=1
Please suggest what could have been wrong while developing or deploying the application.
P.S. : The view object (header) shows data successfully when run in the application module. Also, a .db file gets created in the SD card folder. The synchronisation is a success when mSync.exe file is run in the <Oracle_Home>/Mobile/Server/Sdk/bin.

Sorry my content got repeated.
you can go through this thread FOD mobile db sync with base adf server db not working
there is link that you can follow for synchronization (check second last message)
Edited by: Nikhil Gokhale on Apr 17, 2011 3:55 AM

Which OS for mobile client?

Similar Messages

Maybe you are looking for