Which OS6 package to install?

If my provider is Wind, but I did not get my Blackberry through them, but instead through Telus?

rangus wrote:
Mobilicity released the os for north america. Would this work "better" for tmobile customers here in the u.s. instead of the starhub file? I tried that one and had nothing but problems.
Hello,
If the version number is identical, then the only difference is the "wrappers" that the carrier attaches (special apps from only that carrier, those teaser icons for some additional services from them, etc.). The core OS is identical if the version number is identical.
You might try a clean reload...sometimes that helps. Otherwise, please open a thread of your own so that your issues can be directly addressed.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to find which ESS Package is installed on customer system

Hi All,
I have just joined this project as a portal admin support. The customer has Employee Self Service installed. How can i find which ESS package has been installed by the customer.
Thanks

Hi,
go to http://<localhost>:<port>/index.html
System Information - under Software Components - click on link all components - look for BP_ERP5ESS
and SAP_ESS version which is deployed into Portal.
Hope this helps.
Cheers-
Pramod

Bought a package photographer, installed photoshop and Lightroom 5.6 64-bit, Adobe Photoshop CC 2014 was Russian, and Lightroom 5.6 64-bit is not and was not in a sample of Russian language. Tell me what to do?

Bought a package photographer, installed photoshop and Lightroom 5.6 64-bit, Adobe Photoshop CC 2014 was Russian, and Lightroom 5.6 64-bit is not and was not in a sample of Russian language. Tell me what to do?

Well, the quick summary that you are not going to like: This system is pretty short on RAM and processor power, your graphics driver is outdated and you are using two screens with different resolutions, which eats up all graphics acceleration plus your card has only 256 MB of VRAM in the first place, which doesn't meet the requirements. You will never be able to use 3D under those conditions.
Mylenium

Which software I should install to view video file AVI format on my Imac?

Which software I should install to view video file AVI format on my Imac?

It's hard to say. AVI doesn't exactly describe how the video was encoded. AVI is a package that contains the video content.
However, VLC can play just about anything. That's the first thing I'd try.

Where to see the boot image package path installed on my DP server

I have distribute the boot image content to one of my DP server. Where can I see the package is installed at which location at that particular DP in SCCM 2012 console?

Hi,
The blog below could answer your question.
Configuration Manager 2012: Content Monitoring and Validation
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a package for installing the FlexNet service only?

Hi,
we are trying to virtualize Acrobat Pro 9 using Softgrid/App-V. Unfortunately the FlexNet service does not support virtualization. According to the virtualization community a possible workaround would be a local installation of the FlexNet service on our terminal servers.
To do that I need an installation package for the FlexNet service only or command line parameters for installing the service from the normal package without installing acrobat.
Is such a package or command available somewhere?
Thanks!

There is no standard iView for ME53N, but you can create you own iView which will point to any SAP Transaction in either WinGui or WebGui Mode and assign it to end users.
Refer to the following standard SAP help:
[http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]
Regards,
Trikanth Basetty

What packages to install, and how to install in an USB hard drive

Hello.
Well, as I said in another thread, I want to install in an USB hard drive. But I don't know how, because it hasn't graphical installer, but text installer. I tried in a virtual machine, and it was fine, but when I want to start it, an error appears, "Was not found a bootable system" or something. Maybe a VM is not as a computer, but... well. I didn't change anything while I was installing GRUB, and I know that I've to install it in /dev/sdb.
And I want to know too, what packages to install and what packages don't (the ones which are neither "base" nor "base-devel"). But I'll install sudo, links and ndiswrapper (for wifi).
Thanks, and excuse me if my English is bad.

Gotta use the wiki my friend and this one is even translated into Spanish:
https://wiki.archlinux.org/index.php/In … C3%B1ol%29
As to your question about which packages you'll need beyond those in base and base-devel - that depends on what you want on your system... no one can answer that but you!
Welcome to Arch.
Last edited by graysky (2011-01-01 19:50:46)

Is it safe to use DISM /add-package to install updates on online Windows image?

Is it safe to use DISM /add-package to install updates on an online Windows image?
I mean what happened if you run the command on a folder which contains an update and another update which deprecates the another one?
And what will happened if you have installed an update and try to install an update which is deprecated by that update using DISM?

If you are wanting to install a Windows Update .msu file, use WUSA.EXE instead:
c:\windows\system32\wusa.exe c:\temp\Windows6.1-KB2505438-x86.msu /quiet /norestart

Packaging and installing a java project

Hi everyone,
I have a java project which has been developed in Eclipse IDE. I would like to package the project so that i it can be installed and can be run as a stand alone product.
Any tools that would help me do packaging and installing a java project?
Thank you.

Easiest way to package a Java project is to create an executable jar for it. You probably should google for more information on the 'jar.exe' program (sry for window bias)
If you have external dependencies you should put those in separate jars and include them in the classpath in the jar manifest file.
The only other thing to worry about is getting java installed on other people's machines. In general it is best if possible to have them download java themselves as they will get the latest and greatest from this website. If that's not possible you may want to look into getting sun's permission to distribute Java with your app.

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

Hi,
I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
-cRIO-9113 4 slot chassis
In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
-cRIO-9022 Real-Time Controller
-NI 9144 8 slot expansion chassis
In this chassis I have installed:
-Slot 1: NI 9213 (16ch thermocouple inputs module)
-Slot 2: NI 9201 (8ch ±10 V analog input module)
-Slot 3: NI 9263 (4ch ±10 V analog output module)
-Slot 4: NI 9426 (32ch sourcing digital input module)
-Slot 5: NI 9426 (32ch sinking digital input module)
-Slot 6: NI 9476 (32ch sourcing digital output module)
In the controller I have installed the following softwares:
-IndCom for EtherCAT Scan Engine Support 1.2.0
-LabVIEW NI SoftMotion Module 9.0.0
-LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
-LabVIEW Real-Time 9.0.1
-LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
-Web Server for LabVIEW RT 2.0.0
-Language Support for LabVIEW RT 1.0.0.3
-NI Scan Engine 1.1.0
-NI Scan Engine Advance I/O Access 1.1
-NI-Motion 8.0.0
-NI-RIO 3.4.0
-NI-RIO IO Scan 1.4
-NI-VISA 4.6
-NI-VISA Server 4.6
Well, I made VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
Ferdinand Martinez
FMO Automation LLC

Hi nausfaratu,
Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

BIzTalk schema exposed as wcf service deployment in WIndows server which dont have bizTalk installed

Hi All,
I am deploying my Biztalk wcf service (exposed from Schema) in SIT environment which dont have BizTAlk installed. But BizTalk is installed in One server and Webservices are there in another server.
When I browse the service, it is throwing errors as below.
Retrieving the COM class factory for component with CLSID {9D0E435E-4CCE-4536-83FA-4A5040674AD6} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
[COMException (0x80040154): Retrieving the COM class factory for component with CLSID {9D0E435E-4CCE-4536-83FA-4A5040674AD6} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).]
Microsoft.BizTalk.Adapter.Wcf.Runtime.TransportProxySingleton..cctor() +23
So please advise me on this. Am I going in correct way? Is it possible like this or do we need to install BizTalk for BizTAlk wcf services also in that environment?
Thanks in Advance

Hi,
If you wish to deploy BizTalk WCF services onto another server, you can do so but you need to install BizTalk
there. This is needed because some dlls are needed for the BizTalk WCF services such that it can point effieciently to the receive location in another server (where actual BizTalk application is running). Also the BizTalk runtime is needed in the other server
and hence you need to just install BizTalk on the other server.
Now if your other server is in the DMZ, then you might not go with the above option of installing BizTalk
over there. In that case you need to install Microsoft ISA server (Internet Security and Application Server) and configure your DMZ with that. In that case you can host your BizTalk WCF services over there and make it point to the actual receive locations
on your BizTalk server.
Rachit
Please mark as answer or vote as helpful if my reply does

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

Iv just bought Ipad 2 for back home in UK in usa. I'm trying to set it up for the plane ride home on my sisters pc which already has itunes installed. Will I be able to sync it with my own PC back home.

Iv just bought Ipad 2 for back home in UK in usa. I'm trying to set it up for the plane ride home on my sisters pc which already has itunes installed. Will I be able to sync it with my own PC back home.

Yes, but all the data from your sisters PC will be erased and replaced with yours, which is probably what you want anyhow.

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

Which OS6 package to install?

Similar Messages

Maybe you are looking for