Which OWB version is stable ?

Hi.
I'm working on OWB 10.2.0.1.31 it's very slow!! and load of bugs!! which version is stable? 10.2.0.3 or 11g? please advise.
Thank you
molino

I have recently upgraded to 10.2 from 10.1.0.4. I had originally upgraded to 10.2.0.1.31 and found this to be extremely buggy and essentially unusable. In an attempt to fix these problems I then upgraded again to 10.2.0.3 and have found that although some of the issues have been fixed overall the product is still completely unusable (if for no other reason than what appear to be obvious memory leaks causing the application to hang indefinitely every few times something is generated or attempted for deployment).
Anyone interested in some of the 10.2.0.1 issues should see the following thread:
Post-upgrade tasks for OWB 10g Release 2
Extremely disappointing (and frustrating) overall. Throw in the fact that 10.1.0.4 is "desupported" and you're left wondering which is the lesser of these evils.

Similar Messages

Which OWB version is 'better': 9.2.0.4 or 10gR1?

LS,
For a new project I can choose which OWB version to install. Currently I'm working with 9.2.0.4, and I wonder whether 10gR1 is better.
Since the project starts in a month or so we cannot wait for 'Paris'...
I'm quite satisfied with the performance of 9.2.0.4, know how to work with it and which gripes and bugs to expect.
The only real drawback is the fact that you have to install 9.2.0.2.8 first and then patch it to 9.2.0.4.
The only experience I have with 10gR1 is on my 'own' laptop on which I did a tiny tryout. Works basically the same as 9.2, but I noticed some annoying behaviour.
When editing a table in a mapping, at some stage the "Mapping Table Editor" gets displayed only partially - the left side will be 'blank'.
Don't know whether this is a bug or that it's OS related (running Win2K Pro) or DB related (10g), but it's a hassle because you have to guess what you're typing when adding columns to a table (or view).
Any suggestions on the 'preferred version'?
Thanks, Patrick

Hello Patrick,
no special documentation. But, I try to gather ideas and use cases, even from projects very different from OWB+Oracle, and then there is an effort to obtain a design as modular as possible. For small tables I prefer to lay out a complete, already templated stream of mappings rather then saving some nanoseconds at runtime. The main effort in the OWB GUI is done in preparing templates, and tuning those special cases which require extra care or performance, Ã la Customer dimension.
The graphical tool is home-made. It is an effort to put together in a sensible way the bunch of OMB scripts etc useful to define the ETL.
This reminds me of another GUI idea: I have read in this forum (maybe also from you?) about sharing scripts etc in a more open and easy way than Oracle OTN. This would be very useful, but to me it's diffucult to find a path in my own scripts which often require parameters embedded in the code, not to speak of scripts made by others. So I think it would be useful to write a simple GUI to interface with OMBPlus, allowing to collect the useful scripts that many people ask for and to have a dialog asking for parameters instead of parsing scripts by hand every time one needs them.
I plan to implement this one myself sooner or later, but maybe someone else could be interested in this one.
Antonio

Which WebLogic version is stable

Dear All ,
Have a small doubt.....please help me ....
Currently our application is supporting Jboss 5.1.0 and our team wants to support weblogic as well...... As iam a newbie to weblogic and browsed for some info and found that
weblogic 10.3 & weblogic 11.x are mostly used now ...
But which one of it is a stable product ?? is it ok if we use 10.3 ( I mean shall v get all features that jboss 5.1.0 gives?? ) and we want support for java 6 as well........
Requesting somebody to provide valuable suggestions .....

Of course it is very hard to say with 100% certainty that some software product is stable.
But so far (knock on wood) I have not really experienced any instabilities.
- some problems concerning JPA2.0 and JSF2.0 are occasionally reported and can be read about on this forum
If you need to choose for a certain WebLogic version, I think it wise to choose the latest version (10.3.5), which can be downloaded here:
- http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Probably not the answer you were hoping for, but this is all I can make of it.

Which DB version is stable? Please advice me

Friends,
currently we have oracle 9iR2(9.2.0.4) db in RHEL AS 3. now we would like to upgrade our db to 10gR2. is it ok or we have to upgrade to 11g? is 11g having a stable version? please advice me. Also we have oracle forms6 as front end.
thanks

I'm not sure that anyone can reasonably tell you whether your particular organization should upgrade your particular database running your particular application to 10.2 or 11.1. That's a highly organization and application-specific question.
Is 10.2 stable? Sure. Does it have bugs? Sure.
Is 11.1 stable? Sure. Does it have bugs? Sure.
Does 11.1 have features 10.2 doesn't? Sure. Are those new features more likely to have bugs than functionality that's been in the database for a decade? Of course.
Ultimately, it's a question your organization has to answer. Are there 11.1 features you'll want to use? Are you more comfortable with an R2 release that has a number of patchsets already released? Do your application even work with 11.1?
Justin

Which JAVA version is most stable in 1.6 series?

Which JAVA version is most stable in 1.6 series?

Ideally that would be the latest and greatest available.
In practice, it depends on a whole lot of unknowns. Different JVMs can perform differently on different OSes and with different configs

I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

My iOS remains the same as whats inside my iPhone I bought it 18months ago, which is version 4.2.1, I am told by an Apple shop that its too old to do a proper update, unless all my data will have to be erased !! is this true ? if so, how to get round it

my iOS remains the same as whats inside my iPhone I bought it 18months ago, which is version 4.2.1, I am told by an Apple shop that its too old to do a proper update, unless all my data will have to be erased !! is this true ? if so, how to get round it ? Chuck

Be sure to do a backup before updating as protection. Photos should
be synced with your computer, music should be in iTunes, documents
should be backed up on your computer as should contacts in whatever
program you use on your computer. You should already have backups
of your important information to prevent loss in case of theft, crash,
physical damage. The question is not if your hard drive will crash but
when, and you iPhone is not a backup device nor fit for the only
source of any document, picture, music, movie, contact or otherwise
irreplaceable information.

Which DAQmx Version is sutiable for Labview 8.2.1

Hai Guys,
I am Thiyagu. I have one Doubt in DAQmx. If One year before my senior create One VI. The VI Labview Version 8.2.1. Lastweek running VI Harddisk was crased. I have only source code. I pasted that source code in another PC. I opened that source code It shows DAQmx Write file.VI was Missing. So i searced Daq file and I find it. So i Pasted that Vi in Source code It shows Labview 11 error. Currnt labview Version is 8.6 and DAQ version 8.8. So kindly tell me How to slove this issue and Which DAQmx Version is suitable for 8.2.1
Please do the needfull.
Thanks
Thanks
Thiyagarajan.S
WABCO Vehicle Control System

Any DAQmx should work, I use the latest with LV7.1. You can download it from ni.com or use the CDs supplied with your hardware.
The mistake you made was to copy the missing VIs. You need to run the DAQmx installer instead (after installing LV, so it can detect which LV versions to support).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Pan and Zoom Effect, which PE version introduced it?

I like my PE 3.0 but it does not seem to offer the Pan and Zoom effect. Or am I just not seeing it. Does anyone know which later version introduced it? I know 8.0 has it, but when did it come along? The bundled version of Photoshop 5.0 it came with has a pan slide show, just discovered it.
Also, I am familiar with keyframes, would this be helpful with 3.0 pan? or do I need a newer version. Any tutorials good for this?
thank you

Pan & Zoom is available in all versions that offer Keyframing on the fixed Effects>Motion>Scale (Zoom) and Motion>Position (Pan). What might have been introduced would be Presets to do those with "one button." Do not know when those came into being. I do not use them in PrE 4, and would not in PrE 8, or 9, as I want control, and also the ability to determine what MY subject is, in an image. No amount of AI can do that for me, so a simple Preset stands about a zero chance of doing exactly what I want.
At some point, PSE added the automatic Random Pan & Zoom. Again, were I doing a slideshow in it, I would not apply such, as i would Keyframe Motion>Position and Motion>Scale in PrE.
In PrE 3, I feel strongly that you have the Effects Control Panel (accessed via Edit Effects for a Clip/still), and the ability to Keyframe both Motion>Scale and Motion>Position. This allows one adjust the parameters for those Effects over time, i.e. create a Zoom, and create a Pan. Other than the fact that you do these by hand, by eye and by mind, but with ultimate control, you have the features - just not automatically applied via a single button.
Good luck,
Hunt

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

Novice: how do I determine which OS version I'm on?

How do I determine which OS version is on my iMac?

Apple Logo in menu bar > About this Mac

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
Is this true?
If yes: Which XSLT functions of v2.0 are supported?
Does it matter if I change the
version="1.1"
attribute in the topmost
<xsl:stylesheet......>
tag?
Which XSLT processor is built-in/used?
Peter

XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

How to get which JRE version is used during runtime?

Hi.
I want to know in my application which JRE version the user is using. Is there some method in Properties Object?
Thank you in advance

System API tells all...
"The current set of system properties for use by the getProperty(String) method is returned as a Properties object. If there is no current set of system properties, a set of system properties is first created and initialized. This set of system properties always includes values for the following keys: "
Key Description of Associated Value
java.version Java Runtime Environment version

Jar file , which jdk version ?

I have a question that i want to ask for a long time. Let say someone give you a jar file, how do we check which version of JDK it is compile ?

You can get an easy, but approximate, answer by looking in the jar manifest:
$ jar -xf somejar.jar META-INF/MANIFEST.MF
$ cat META-INF/MANIFEST.MF
Manifest-Version: 1.0
Class-Path: someotherjar.jar
Created-By: 1.6.0 (Sun Microsystems Inc.)
Main-Class: Main
The Created-By attribute says which JDK version created the jar file. However, that's not always the same as the version that was used to compile the classes. To get an exact answer, you'd need to look at the class file version number, and you'd have to do it for each class file since they don't all have to be the same. Gory details left as an exercise. Here's a reference to get you started:
http://java.sun.com/docs/books/jvms/second_edition/html/ClassFile.doc.html#80959

Which OWB version is stable ?

Similar Messages

Maybe you are looking for