Which patch to apply when live upgrading to a new OS

Hello Guys,
when you use live upgrade to upgrade to a new OS level , which patches do you apply before performing the upgrade? I used prerequired patches from 10REC when performing a live upgrade patching . Do you use these same prerequired patches when upgrading to a NEW OS LEVEL?
Your response will be truely appreciated.
Thanks

Hi.
I hope it's help:
http://docs.oracle.com/cd/E26505_01/html/E28038/preconfig-17.html#luplanning-7
Ensure that you have the most recently updated patch list by consulting http://support.oracle.com (My Oracle Support). Search for the knowledge document 1004881.1 - Live Upgrade Software Patch Requirements (formerly 206844) on My Oracle Support.
The patches listed in knowledge document 1004881.1 - Live Upgrade Software Patch Requirements (formerly 206844) on My Oracle Support are subject to change at any time. These patches potentially fix defects in Live Upgrade, as well as fix defects in components that Live Upgrade depends on. If you experience any difficulties with Live Upgrade, please check and make sure that you have the latest Live Upgrade patches installed.
If you are running the Solaris 8 or Solaris 9 OS, you might not be able to run the Live Upgrade installer. These releases do not contain the set of patches needed to run the Java 2 runtime environment. You must have the recommended patch cluster for the Java 2 runtime environment recommended to run the Live Upgrade installer and install the packages. To install the Live Upgrade packages, use the pkgadd command. Or install, for the Java 2 runtime environment, the recommended patch cluster. The patch cluster is available on http://support.oracle.com (My Oracle Support).
For instructions about installing the Live Upgrade software, see Installing Live Upgrade.
Required patches available via MOS ( My Oracle Support: http://support.oracle.com).
But for access to this site you must have active service contract.
Regards.

Similar Messages

  • Which patch to apply in OEM 12c 12.1.0.4 -  PSU or Bundle patch

    Hello All,
    Could you please help me to understand - which patch to apply in OEM 12c 12.1.0.4 -  PSU or Budle patch ?  Per doc id - Enterprise Manager 12.1.0.4.0 (PS3) Master Bundle Patch List for Agent and Plug-ins (OMS and Agent side) (Doc ID 1900943.1) -
    which of the below  mentioned patch to be applied in OMS ?
    1> System Patch 12.1.0.4.10 - Patch 20675595 (This is a single Sytem patch that includes all the OMS-Side Plug-in Bundles released this month as well as OMS-side Plug-ins released in previous months.)
    or
    2> For 12.1.0.4, this is Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT&sourceId=1900943.1&id=20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT&sourceId=1900943.1&aru=20392036 &patch_password=&no_header=020392036 (12.1.0.4.3 PSU).  Please refer to Note.1995267.1 for the latest PSU patches available for Oracle Enterprise Manager Cloud Control 12c Release 4 (12.1.0.4).
    We recently upagraded our OEM from 12.1.0.2 to 12.1.0.4  with out using software updates option  during upgrade, hence none of the PSUs are applied to OEM. Now we want to apply latest OEM  patches which fixes all the fixes and bug/securities.
    I thought BP will include PSU as well but  why does DOC id - 1900943.1  says - NOTE: We recommend that you always apply the most recent quarterly PSU.  For 12.1.0.4, this is Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT&sourceId=1900943.1&id=20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT&sourceId=1900943.1&aru=20392036 &patch_password=&no_header=020392036 (12.1.0.4.3 PSU).  Please refer to Note.1995267.1 for the latest PSU patches available for Oracle Enterprise Manager Cloud Control 12c Release 4 (12.1.0.4). ??
    Please help .

    The answer is Yes.   
    The PSU is core OMS patches (think console, incident rules, notifications, etc.) This gets applied to your OMS ORACLE_HOME (i.e. /u01/app/oracle/mw/oms)
    The Plugin System Bundle is a compilation of all the latest plugin patch bundles (So for DB Plugin bundle it contains all the latest DB Plugin fixes).  The system patch will apply required patches as necessary, skip what's not.
    You can read more about the various patches here -
    Patching 101 - The User Friendly Guide to Understanding EM Patches - Courtney Llamas
    http://courtneyllamas.com/enterprise-manager-patching-faq/
    I highly recommend this note as well.  It will help identify exactly what should be applied to the entire EM env. 
    Applying Enterprise Manager 12c Recommended Patches (Doc ID 1664074.1)

  • Which patch to apply in ONLINE mode

    How can we judge which patch to apply in ONLINE/Hot mode...??
    Is the patch readme only option ??
    or there is some other way ??

    Hi Vicky,
    General Patch readme shows you that if patch require down time or no? other than that you need to assume from your server performance wether you will able to apply patch online with sufficenet worker or not? and how much time will it take? also consider the size of patch you need to apply. And then take decision wether to apply patch online or not?
    Thanks,
    Vishal Joshi

  • PLEASE HELP when I upgraded to the new firefox my old one got deleted which had all my stuff and my mac is only 10.4.11 and wont work please help!!!

    PLEASE HELP when I upgraded to the new firefox my old one got deleted which had all my stuff and my mac is only 10.4.11 and wont work please help!!!

    Need to Resume download to complete the ongoing Process.
    Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
    To save the photographs you may have to use third party software. Google is your friend.

  • When i upgraded to the new iPhoto !! how i could restore them ??

    All my photos on the old iPhoto disappeared when i upgraded to the new iPhoto !! how i could restore them ?? also i can see the size of the photos on the Hard disk  which mean my photos are there but i dont know how to find them . i had to use Command + option  when i startup iphoto   but nothing happened

    Simple solution: restore from the back up you made prior to upgrading.
    Other than that:
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch

    Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch. Downloaded latest version f itunes, and ipod software up to date. Really frustrated I can't sync my music! Please can someone help me

    Im having huge issues after updating to 12.1 on Win 8.1  x64. Choppy playback and so on.
    Try this since it helps in most situtation :
    Remove itunes but keep library files. Then download it again and install it.
    Also most likely you will have to restore ipod touch. I restored my iPhone 5 to remove waiting for changes to apply and Error 54.
    my iPad air still isnt restored (cant do it now) and it sometimes does same like iPhone waiting for changes to apply. And gives error 54 but sync DOES GET COMPLETED.
    Also may sound stupid but try to use USB 2.0 Ports. Not 3.0. I have troubles when using 3.0

  • Which patch to apply

    Hi All,
    I want to apply a patch on Oracle AS.
    my Oracle As version is
    SQL*Plus: Release 10.1.0.4.2 - Production on Sat Jul 23 11:07:41 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name:
    I compared my prod with my new Prod, I can see that the different in patchset
    on prod:
    Creating log file "/opt/oraapps10g/OraHome/.patch_storage/LsInventory__07-23-2011_11-20-00.log"
    Result:
    Installed Patch List:
    =====================
    1) Patch 5148419 applied on Sat Dec 13 10:57:09 GMT-06:00 2008
    [ Base Bug(s): 5123798  ]
    OPatch succeeded.
    on new Server i am not seeing any patch information when i run opatch lsinventory.
    When i go to metalink and searched for Patch 5148419, I dont find in metalink. i find patch for 5123798 it is for
    10.2.0.3 and not for the PROD release 10.1.0.4.2.
    Could you please let me know if i will apply this patch as per the metalink note 367577.1 if i will apply the which patch i need to apply for my version?
    Your help is much appreciated in this regards.
    Thanks and Regards,

    Hi there,
    if you plan to go with 9.2.0.8 then login to Metalink and:
    1) Click on "Patches & Updates" and check the "Recommended Patches" link for 9.2.0.8
    2) Check out Note:388281.1 ("Advanced Search ==> DocID)
    Kind regards
    Mike

  • Have Identity Safe Login thru Norton which I like but when I upgraded to newest version of Firefox, it doesn't come up. What do I need to do?

    I use Norton 360 for security and virus protection. Part of the service is Identity Safe where it stores my logins and once I login into that, it automatically populates logins and passwords. When I upgraded to the latest version of Mozilla Firefox, the dialog box for it doesn't pop up for me to log in. How do I go about getting it to do this? I tried that Last Pass and did not like it at all. In fact, I have removed it.
    Thank you!

    I have heard that Norton released an update patch for Firefox 5.0 on Tuesday 06-21 when Firefox 5.0 was released. ''(versus taking their normal six to eight weeks)'' Some Norton users have reported that the toolbar may not work if the Norton patch was installed before Firefox 5.0, instead if after Firefox 5.0 was already installed.
    http://community.norton.com/t5/Norton-Internet-Security-Norton/Update-Available-Firefox-5-0-Compatibility-Release-for-Norton/td-p/478160
    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-for-Firefox-5/td-p/475704/page/16

  • Which patches to apply on top of a WebLogic Portal 10.3.5 installation?

    Hi,
    Is there any MOS note that lists which patches should be applied on top of a WebLogic Portal 10.3.5 installation?
    Regards Peter

    Thank you Emmanuel.
    Is it because the features in Portal Examples were not supported anymore since 10.3.4?

  • Which patches to apply for 11i Demo Instance?

    Who can tell me which patch must be applied for 11i Demo instance after install completely because I found many errors from 11i Demo such as Oracle Managemnet Module can not test the functionality.

    You need to apply the 11.5.3. level of code and Patch set D before you do much with OM. Even with 11.5.3. you will still not be able to complete a full order cycle. Shipping still gets blocked with errors that are being worked on at Oracle Development as we speak.

  • Which patches to apply to a fresh installation of JES 2005Q1/2005Q4?

    Hi Jay,
    Hi Forum,
    i just installed JES2005Q4 on Solaris 10 and i ask myself which patches Sun recommends to install for this JES release, if there are any (patches for application not for solaris!).
    For JES2005Q1on Solaris 10 i found the follwing patches to be useful (although the communcation express patch is only for sol9):
    Document Audience:     PUBLIC
    Document ID:          116577-24
    Title:               Calendar Server SunOS 5.8 5.9 5.10: Core patch
    Update Date:          Tue Sep 06 14:08:36 MDT 2005
    Link:               http://sunsolve.sun.com/search/document.do?assetkey=1-21-116577-24-1
    Document Audience:     PUBLIC
    Document ID:          118207-37
    Title:               Messaging Server 6.2-3.03: core patch
    Update Date:          Fri Aug 19 17:26:24 MDT 2005
    Link:               http://sunsolve.sun.com/search/document.do?assetkey=1-21-118207-37-1
    Document Audience:     PUBLIC
    Document ID:          118540-10
    Title:               Sun Java System Communications Express 6.2p1 SunOS 5.8 5.9: core patch
    Update Date:          Thu Mar 10 14:46:18 MST 2005
    Link:               http://sunsolve.sun.com/search/document.do?assetkey=1-21-118540-10-1
    Maybe some people can comment my list or tell from their experiences (for both versions 2005Q1 & 2005Q4). I want to make my setup as clean & fresh as possible.
    Thanks a lot,
    af_inet

    sorry, the CE patch is for any os level. . .
    There are actually later versions of these patches, not quite released to Sunsolve, yet. You need to contact Tech Support to get them.

  • When to upgrade to a new firewall

    When do you know it is time to upgrade to a new firewall?  From the Cisco Podcast #7 "Monitoring Firewall Performance", the speakers said when the CPU usage consistently is at 50% or higher, that is the time to upgrade.  They gave their reasons which made sense.  And I can check the CPU usage with a show cpu usage command. 
    Are there any other signs beside CPU usage that it is time to upgrade the firewall?
    Thanks.
    J

    1) Yes. If your device is reaching 50 % of the cpu usage then you may need to upgrade for the consistent performance.
    but the cpu usage increase may be due to other issues as well. But if everything is normal and cpu usage is crossing 50% then you may need to upgrade. This is one of the reason only. there are lot other.
    2) Depends on your future expansion / requirement you may need for an upgrade in the model.
    Feature
    Cisco ASA 5505
    Cisco ASA 5510
    Cisco ASA 5520
    Cisco ASA 5540
    Cisco ASA 5550
    Users/Nodes
    10, 50, or unlimited
    Unlimited
    Unlimited
    Unlimited
    Unlimited
    Firewall Throughput
    Up to 150 Mbps
    Up to 300 Mbps
    Up to 450 Mbps
    Up to 650 Mbps
    Up to 1.2 Gbps
    Maximum Firewall and IPS Throughput
    • Up to 150 Mbps with AIP-SSC-5
    • Up to 150 Mbps with AIP-SSM-10
    • Up to 300 Mbps with AIP-SSM-20
    • Up to 225 Mbps with AIP-SSM-10
    • Up to 375 Mbps with AIP-SSM-20
    • Up to 450 Mbps with AIP-SSM-40
    • Up to 500 Mbps with AIP-SSM-20
    • Up to 650 Mbps with AIP-SSM-40
    Not available
    3DES/AES VPN Throughput***
    Up to 100 Mbps
    Up to 170 Mbps
    Up to 225 Mbps
    Up to 325 Mbps
    Up to 425 Mbps
    IPsec VPN Peers
    10; 251
    250
    750
    5000
    5000
    Premium AnyConnect VPN Peers* (Included/Maximum)
    2/25
    2/250
    2/750
    2/2500
    2/5000
    Concurrent Connections
    10,000; 25,000*
    50,000; 130,000*
    280,000
    400,000
    650,000
    New Connections/Second
    4000
    9000
    12,000
    25,000
    33,000
    Integrated Network Ports
    8-port Fast Ethernet switch (including 2 PoE ports)
    5 Fast Ethernet ports; 2 Gigabit Ethernet + 3 Fast Ethernet ports*
    4 Gigabit Ethernet, 1 Fast Ethernet
    4 Gigabit Ethernet, 1 Fast Ethernet
    8 Gigabit Ethernet, 4 SFP Fiber, 1 Fast Ethernet
    Virtual Interfaces (VLANs)
    3 (no trunking support)/20 (with trunking support)*
    50/100*
    150
    200
    400
    Security Contexts (Included/Maximum)*
    0/0
    0/0 (Base); 2/5 (Security Plus)
    2/20
    2/50
    2/50
    High Availability
    Not supported; stateless Active/Standby and redundant ISP support*
    Not supported; Active/Active and Active/Standby**
    Active/Active and Active/Standby
    Active/Active and Active/Standby
    Active/Active and Active/Standby
    Expansion Slot
    1, SSC
    1, SSM
    1, SSM
    1, SSM
    0
    User-Accessible Flash Slot
    0
    1
    1
    1
    1
    USB 2.0 Ports
    3 (1 on front, 2 on rear)
    2
    2
    2
    2
    Serial Ports
    1 RJ-45 console
    2 RJ-45, console and auxiliary
    2 RJ-45, console and auxiliary
    2 RJ-45, console and auxiliary
    2 RJ-45, console and auxiliary
    Rack-Mountable
    Yes, with rack-mount kit (available in the future)
    Yes
    Yes
    Yes
    Yes
    Wall-Mountable
    Yes, with wall-mount kit (available in the future)
    Not available
    Not available
    Not available
    Not available
    Security Lock Slot (for Physical Security)
    Yes
    Not available
    Not available
    Not available
    Not available
    Technical Specifications
    Memory
    512 MB
    1 GB
    2 GB
    2 GB
    4 GB
    Minimum System Flash
    128 MB
    256 MB
    256 MB
    256 MB
    256 MB
    System Bus
    Multibus architecture
    Multibus architecture
    Multibus architecture
    Multibus architecture
    Multibus architecture
    the above table shows the maximum capability of the ASA firewalls. when the requirement needs upgrade you have to go for that.
    3) When it comes for end of support from Cisco tech.
    these are the major factors for an upgrade.
    do rating if the info is helpful.
    cheers
    Karthik

  • When I upgraded to the newer version of Firefox my add-on no longer showed at the bottom. How do I get the add-on to show at top and bottom? Do I need to go back to an older version?

    I upgraded Firefox to the newest version (4 I think it was from 3). Now my "add-on" no longer appears"at the bottom" of the screen, only at the top. Do I need to go back to the older version in order for the add-on to show at top and bottom? If so, how do I do that if I decide to do it?

    Your UserAgent string in Firefox is messed up by another program that you installed, and those websites don't know you are running Firefox 3.6.3 (which is what you do have installed).
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • Can anyone tell me how to import current data from apps when I upgrade to a new phone?

    Hi,
    When activating my new iPhone 5S, after syncing my old 3GS to iTunes then immediately syncing the new phone, the data in some of my apps that was imported was very, very old. Examples are entries in Calengoo, entries in Due, and entries in Balance. In all of those apps, the information that was imported onto my new phone was from last fall, late September or early October. I resolved the issue with Calengoo and with Due, but not yet with Balance. Also, the podcasts that were imported onto my new phone were not the ones that are currently downloaded onto my old phone. I must be doing something wrong on the sync of the old phone (? or so I guess)?
    If anyone can help me get it straight, I'd be most grateful.
    Thanks,
    Chris

    Thanks Jim. If I create a backup, can I use that to only import certain apps, or will that backup replace what's currently on my new phone? If that does happen, I figure I can sync the new phone to iTunes, use the backup created from the old phone to bring that info to the new phone, then use the sync I just made to bring back the information / apps I've since added to my new phone?
    Thanks!
    Chris

  • Lost all of my contacts when i upgraded to the new software

    does anyone know how to retrieve my contacts? they are still on my main mac but will not transfer to my iphone....help!

    Have been reading many entries about Contacts vanishing from the iPhone, or even the application's icon altogether...!
    My Contacts were still on my Mac and on MobileMe.
    So, with No Contacts on my iPhone's screen, I just entered a new one, and just called it Test. iPhone started to sync and the Test address soon vanished. But after ten minutes, I got all my old Contacts back on my iPhone.

Maybe you are looking for