Which pins are which?

I'm using the parts of a spare usb cable and a couple of pieces so that I can plug into the bottom and get the line-out feed.
The problem isn't how to do it, but which pins are which. I've found diagrams that say it's the same for all ipods, but it's hard confirming. A multi-meter barely registers anything because even if you try to measure any AC current, line level is so low that it's hard to pick up much.
I connected pins to the line out displayed in the diagram, and I've tested the continuity to ensure that the signal goes from one end to the other, but nothing audible comes through.

I've tested the continuity to ensure that the signal goes from one end to the other, but nothing audible comes through.
How are you testing it?
Line level is only ~1 volt so you need headphones or and amp. If you are plugging it into a speaker, you won’t hear much, if anything.

Similar Messages

  • Some help required - confused wiht which calendars are which

    i have calendars in 'on my mac' and the same calendars in '[email protected]' in ical on my macbook. these are duplicating and i dont recall them doing so until recently (last few months). which ones set of cals are my masters? why should i need to have both sets in my ical.
    i am syncing with iphone, ipad and imac through mobile me. so i just want a reliable method to sync and edit through mobile me on each device without displaying or creating repeat entries.
    thank you

    I have this problem too, using an iMac iPad and iPhone,
    On my iMac it's just one calendar
    On my iPad it's from my Mac and MobileMe
    On my iPhone it's only MobileMe
    I have done a sync and a back up, I get reminders twice everywhere!
    I can't work out how to use only MobileMe???
    And ideas?
    Thanks in advance

  • Lightroom 3 not sure which pictures are which in Library view/slideshow?

    Well I've been trying out LR3 for the past week or so and have a nagging problem. Say I had an import yesterday from a birthday party, and one today from a football game. I'll import the football game pictures and then be in library mode, with the view showing all pictures. Down with all of the football pictures, every once in a while, randomly, some of the football thumbnails will switch to show birthday party pictures. And the same thing happens in slideshow mode...you'll be cruising along with football pictures, and out of the blue one will "flip" or switch to a birthday picture. This is driving me nuts and makes it difficult when you're all ready to work on a picture, when all of a sudden it flips over to a picture from another day. Can anyone shed any light on this?

    I can't but I have seen this in Develop when using Crop. The image flip to something from a different location and back. Bizarre.

  • Which pins do I use for 5V output of a CB 50-LP connector block ?

    I have the PCI-6025E and the CB-50 LP. I am trying to determine which pins are used to get a 5V output to connect my load cell to. As I understand, there are a set of pins for 5V and a set of pins for 10V. Also is this a continuous output or do I have to be running LabView?
    Thank You,
    JustinMRice

    @Dennis 
    CB-50 LP is not included in the accessory list available for 6025E in DAQmx. All reference pdf listed for CB-50 LP are less than helpful http://sine.ni.com/nips/nisearchservlet?nistype=psrelcon&nid=13591&lang=F&q=FQLlocale:fr+OR+locale:e...).
    Your link was useful. Thanks!

  • Connecting to home theatre - which plugs are wh

    Hello all,
    I just got a Sound Blaster Audigy 2 Value for my computer which is connected to an amp with 5. surround speakers. I'm probably going to plug the sound card to the amp via the individual mini rca plugs, but i need to know which plugs are which. ie, which colour is front left and front right, which is surround left and surround right, and which is centre and subwoofer.
    I would do it through trial and error but I haven't dealt with subwoofers much before and i'm afraid that connecting it wrong might damage the speakers, ie plugging a speaker into the subwoofer plug, or vica versa.
    Thanks very much for the help people.

    Thanks very much for the help guys. I received the sound card today and plugged it in and it seems to be working.... almost.
    I've connected it by converting the 3 mini rca plugs into 6 rca plugs (the red and white ones), which are plugged into my amplifier. The amp has 5. speakers attached to it.
    There's one problem. When I calibrate the speakers, the fi've normal speakers work fine, but when it moves onto the subwoofer it starts coming out of the sub for a second or two, then moves to the rear left speaker for a couple more seconds, then to the rear right speaker, then makes a few clicking noises and keeps changing between the two rear speakers. Why is this?
    I know that the cause of the problem is the sound card, because I unplugged the plug which sends the subwoofer signal from the sound card to the amp, and exactly the same thing happened except that the first few second where originally the subwoofer made a noise, it was silent. After that though, it still went to the rear left speaker, then the rear right speaker, doing all sort of crazy stuff.
    I have the sound card set on 5. speakers, and i can't think of any other setting that i would want to change. Any ideas?

  • Which expansion slots are which.

    I am looking to add more firewire 800 and USB 2.0 slots and am wondering which slots are which.
    I tried speaking to the technical department at Apple but they could not confirm exactly (amazing really, kinda makes you wonder why they have a technical dept LOL)
    I have a new Mac Pro Intel 2 x 2.8 there are four slots
    Slot 4 x 4 (nearest the top of the mchine when upright)
    Slot 3 x 4
    Slot 2 x 16
    Slot 1 x 16 (used by the Nvidia 880 graphics card)
    I will be adding another graphics card so I assume I will need to use the x 16 slot but my question is, are the other two x 4 slots PCI express.
    How do I check how many watts I am pulling, I understand I need to keep within the 300 watt max.
    I won't be using the other graphics card very often, it's going to be connected to a 40" Sony LCD for slideshows when clients come round.
    I am thinking about adding an sata card in one of the slots and a firewire800/usb 2.0 in the other slot.
    Does this sound ok to people?
    (if anyone has particular suggestions as to which internal cards to get, I would be more than happy to take some advice)
    Thanks Guys.
    Jason

    I have spoken with them again and got someone who knew what they were talking about this time.
    It seems that all 4 slots are PCI Express but the two x16 slots would have to be used for the graphics cards as I suspected.
    I will look at firewire800/usb 2.0 for the other slot and maybe an eSATA card for the last.
    Would I be better to connect my lacie external drives to the eSATA or the firewire 800?
    The sonnet Tango 800 Express sounds good with 2 USB and 2 FW800 externals and maybe another card with 2 eSATA connections.
    Suggestions welcome.
    Thanks.

  • How to see which files are open on shares

    Im fairly new to OS X Server. Am running OS X Server 10.6.8
    How can i see files that are open through AFP or SMB? I've tried the command lsof but that doesnt seem to show open files through network.

    Try smbstatus.
    To pin down exactly which files are locked for use, try:
    smbstatus | grep -i deny_write
    For AFP, I'm not sure exactly how it's done -- there isn't an afpstatus command, so I'm a bit in the dark. However, you could probably use a combination of lsof and grep to find any objects of type REG and owned by applefile.
    Maybe this:
    sudo lsof | grep -i "^applefile" | grep REG
    But that will return everything in use by the AppleFile service. From there, though, one may need to be familiar with what shares are on the system to further deduce what's open. For example, I get 10 lines returned, but only one of them contains a known share name (/Users/username/path/to/file), the rest are system directories (/System, /private, /usr, /Library and the like).
    Hope this helps a bit.

  • Issue on payroll area which is changing from biweekly to monthly in Mid of

    Dear Experts,
    I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
    One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
    In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
    Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
    Thanks
    Chandra

    You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
    Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on  03/29.
    Retire payroll is on 04/08
    Biweekly is on 04/15
    Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
    What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
    I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

  • TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

    I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
    Can you help please?

    Thanks King_Penguin for taking time to read and reply. 
    I just purchased this movie on Thursday, May 15, so just a few days ago.  I have never had any trouble whatsoever since I have been in Vietnam.  I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase. 
    Sorry, I don't quite understand what you mean by studios and different versions.  Could you please explain? 
    I checked my purchased list in my purchase history under my account and there are no hidden items. 

  • How can you determine at runtime which libraries are attached?

    Hi
    I am wondering if there is a way to determine which libraries are currently attached to a form at runtime. My application is in forms 10g.
    I am hoping to get the full path so that it is possible to show this in an information type display. I am ideally looking for a solution that works on both Unix and Windows so that it can be used in development and production
    thanks in advance
    Wayne

    I am curious, why you want to know which library is attached and the full path??? You cannot change it at runtime!!
    I don't think that's possible at runtime by using Generic Forms built-ins, But as always with Oracle, you can have several solutions.
    One solution is to initialize global variables/parameters in PRE-FORM and later you can read them and see the values and do whatever you want accordingly.
    When using Global variables, you can test for their DEFAULT_VALUE to check whether the variable exists or not, this will prevent getting an error if the variable hasn't been initialized yet.
    Tony

  • How can I identify which albums are associated with a specific picture.  I used to click on the picture and see the albums but don't know how to do it in 13?

    I keep pictures in Albums, specifically by year and then other topic albums. As a result some pictures are in several albums. Sometimes they are assigned in error.  I used to be able to click on a picture and see not only the tags but the albums associated with the picture.  How can I see which albums are assigned to a picture?

    Are you referring to the yellow text box that pops up like this?
    If it is those are called tooltips or anchor titles.  Cyclosaurus has posted script to block them: removing rollover html detail box: Apple Support Communities.
    OT

  • How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

    How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

    100pat wrote:
    Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
    Like I said before ask facebook or look at their support site to see if that is even a feature.

  • I have apps on my iPhone that I want to delete but do not want them deleted from my iPad.  How do I know which ones are iPhone specific?

    In order to save using data when traveling I want to delete apps from my iPhone that I don't need.  However I do want these apps on my iPad and with the new IOS8.0.2 and Yosemite I think they are all now integrated so that if I delete from one device it is deleted from all and if I add to one device it is added to all.  Is this correct?
    1.  How can I tell which apps are specific to iPhone and which are specific to iPad?
    2.  How can I tell how much data is being used per app?
    3.  How can I tell if an app is running in the background?
    4.  When I turn off cellular data does that limit the app from functioning always or just restrict it to wi-fi?
    5.  Do I benefit from having Bluetooth on if I don't use a head phone or other device?
    6.  Is a Personal Hotspot more secure than using paid hotel wi-fi?

    Deleting on one device does not affect another device.
    You can delete the App's on the iPhone and nothing will happen to the ones on the iPad.
    1.  You don't need to.
    2.  Settings->Cellular->"Use Cellular Data For" will show the data usage for each App since the last statistics reset
    3.  Settings->General->Background App Refresh Will show which Apps are allowed to get data in the background
    4.  It restricts it to Wifi.  If the App requires internet access and Data is turned off, it will have to wait until the device is connected to a wifi network.
    5.  Nope, You just use up battery since the BT radio will continuously look for nearby BT devices.
    6.  The Personal Hotspot uses your cellular internet connection from your phone or other cellular device; whether you consider that secure or not I cannot say.  It also depends on what you are doing while connected to the Hotel's wifi. I would not do online banking while on vacation though.

  • My computer says I cannot use icloud because I have multiple versions of outlook installed. How do I find out which versions are installed and how do I decide which one to delete?

    My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?

    That's a Windows/Office problem. You should ask in the Microsoft support forums.

  • I have about 5,000 images in a Folder.  How can I determine which images are NOT in a Collection?

    I have about 5,000 images in a Folder.  How can I determine which images are NOT in a Collection?

    Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
    That works if you are thinking about a specific named collection.
    If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

Maybe you are looking for