Which port does Caller id use?

Replaced my verizon router with a netgear wndr 3700 connected to the ont and connected the vz router to the netgear lan -> wan
All appears to work ok except for caller id. I guess one of those port forwarding of verizon services in the vz router controls that?
Anybody have any idea which one it is?
Solved!
Go to Solution.

Have you tried placing the Verizon router in a "DMZ" on your new router?
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Which ports does PVC2300 camera use

I am trying to make our PVC2300 reachable from the outside world. Since it has a web interface we'd like to just reach it through our apache proxy on one of our servers.
We've added:
        ProxyPassReverse /camera_test/ http://192.168.75.97/
        ProxyPass /camera_test/ http://192.168.75.97/
to the configuration file in Apache.
Now, the webpage for the camera is reachable; all settings can be changed, but no streaming video is seen.
Any thoughts on what else we'd have to do?
Eljakim

A VPN conneciton is the recommended best practice to access cameras remotely. But you could open up some port forwarding rules on the router to let through to the camera...
Depends how you set up the camera to some degree....Here I assume that we used the camera advanced setting to set an alternate HTTP port of 1024, so requests can come in for more than one camera on the same LAN (1024, 1025, 1026). If you arent using alternate ports, assume TCP 80 instead.
Camera
HTTP w/ MPEG4
HTTP w/ MJPEG
TCP w/ MPEG4
TCP w/ MJPEG
UDP w/ MPEG4
UDP w/ MJPEG
PVC2300 / WVC2300
Audio & Video=1024
Audio & Video=1024
Audio & Video=554
Audio=554
Video=1024
Audio
Video
Audio (none)
Video = 1024
In General terms, one would expect:
•    If HTTP is selected the video/camera data will be encapsulated in HTTP packets
•    If TCP/UDP is selected the video stream is via RTSP
But this will also depend on the CODEC used:
•    MJPEG uses port 80 for streaming video.
•    MPEG-4 uses port 554 for RTSP streaming

Which ports does Webi Rich CLient use to connect to Universe etc..

Hello together,
we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
It will always say universe not found. Login to rich client and everything else is possible.
It's not an authorisations problem, inside the network people can run the programs fine.
Thank you

Hi,
i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

Re:Which port does the copy file function use?

Hi ,
How does the Copy File Function work?
Which port is used?
My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
Regards .

Hi hussein ,
Please find the details
1)Please post the details of the application release, database version and OS .
App Release: 11.5.10.2
DB Version: 10.2.0.4
IBM AIX on POWER Systems (32-bit)
2)How does the Copy File Function work?
What copy file function you are referring to? Please post the navigation path.
1. Submit Request
2. View Output File
3. Tools --> Copy File
3)Which port is used?
My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
How are you planning to manage the bandwidth of specific port?
If I know which port is used, I can manage it (give it to low priority)
Regards .

Which macros does BEx Analyzer use? How to call the refresh macro?

Hi everybody,
I would like to get an overview about which macros the BEx Analyzer uses, espacially the macro which is responsible for refreshing the workbook. I want to know what BEX Analyzer is doing when I open the variable screen, I assume there is an SAP macro that opens the variable screen?? I tried to look in the online help at help.sap.com but couldn't find a list of macros.
The idea behind this is, that I have a BEx workbook with 5 queries in it. A colleague now wnats to write a VBA code that calls the variable screen, enters company 1, period and year, runs the workbook and saves it. Then opens the variable screen again, enters company 2, period year, etc etc etc......
What my colleague needs to know is which macro he has to call for the workbook refresh / variable screen in order to make his VBA coding.
Many thanks in advance!!
Michael

Which version of Bex are you using ? Bex 3.5 or Bex 7 ? This will significantly affect the answer.
For Bex 3.5, here is some useful information;
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
Edited by: Charlie Belt on Jun 7, 2011 9:12 AM

Which port does Safari use for web browsing directly on Mac

In our intranet network, clients both using proxy or directly connect to internet is OK, but when we disable UDP port upwards 10000, Mac users can not connect to internet without seting proxy, and Windows user is no problem on this. How could this be, wich port does safari use when browsing web

Should be using Port 80 (HTTP).
Here's the list:
http://docs.info.apple.com/article.html?artnum=106439
Hope this helps...

Which protocol does weblogic7 webservice use?

hello
i know that the java webservice development use either axis or soap protocol,but
i don't know which protocol does the weblogic7 webservice use?
thank you

We have our own implementation of soap.
WebLogic Web services use Simple Object Access Protocol (SOAP) 1.1 and 1.2
as the message format and HTTP as the connection protocol. See SOAP 1.1 with
Attachments.
Note: WebLogic Web services accept both SOAP 1.1 and 1.2 incoming
requests, but produce only SOAP 1.1 outgoing responses.
http://e-docs.bea.com/wls/docs70/webserv/overview.html
Google.........
http://google.bea.com/search?q=soap+version&ie=&site=bea&output=xml_no_dtd&c
lient=bea&lr=&proxystylesheet=http%3A%2F%2Fdev2dev.bea.com%2Fimages%2Fdev2de
v.xsl&oe=
cheers
mbg
"zhebincong" <[email protected]> wrote in message
news:3e7d2ed3$[email protected]..
>
hello
i know that the java webservice development use either axis or soapprotocol,but
i don't know which protocol does the weblogic7 webservice use?
thank you

HT4199 WHAT PORTS DOES APPLE TV USE?

WHAT PORTS DOES the APPLE TV USE?

Google "Apple TV ports" and you get
<http://support.apple.com/kb/HT2463?viewlocale=en_US&locale=en_US>

What server adresses and ports does creative coud use?

Hi,
The company I work for has blocked most things in the firewall. In order to open up for Creative Cloud, the network team needs to know which ports and which servers to allow.
Where can I find this information?

Kent c. please ask your network team to review the Adobe Creative Cloud Service Access Documentation for IT section of http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

Which port does datasocket use?

I'm trying to write string information, across the internet, to a datasocket server, using the dstp protocol. For some reason I can't get this information through to the server. My thinking now is that a firewall is blocking this data and I need to open up the port being used. Does anyone know what port is used when writing to a datasocket server?

datasocket server listens on port 3015. It should be listed as a non-blocked port in order for it to function.
aartjan

What "ethernet port" does airport utility use for "remote administration"

I have a friend who was recently evangelized to Macs and bought a Macbook Pro and an Apple Airport Extreme (gigabit) Router, hereinafter called AE. The place where he lives has cable modem internet access and an older Linksys wireless-G router for the building, and I am trying to configure his new AE, prior to making it the primary router in the network (e.g. connected to the cable modem).
When the AE is completely configured the Linksys will be retired.
I remotely manage and maintain the network and some other computers in that house. The Linksys is configured for Remote Administration so I can manage it. I manage several PC's and Macs using Timbuktu Pro 8, with the necessary ports forwarded through to TB2 on those machines.
I am trying to configure the Airport so it also can be managed remotely, so from a workstation on that network (accessed from where I am using TB2) and running Airport Utility, I have checked "Allow setup over WAN" on the Airport/BaseStation page. Now I would like to test whether I can connect and remotely administer that Airport Extreme from Airport Utility on my Mac.
I assume that, if I can rout packets from my Airport Utility here through the internet to the public IP of the Linksys router there, I should be able to connect. But I can't.
My setup is this. The target AE has its WAN port connected to an ethernet port on the Linksys, as is the LAN in the remote building. Nothing is connected to the AE's ethernet ports at this time. The Linksys is the DHCP server, and the AE has an IP from it, as does all the other ethernet- and wireless-connected computers, printers, etc. The AE's wireless is active and the wireless-connected devices in the building can connect to either its base station or to that of the Linksys. When the Linksys is retired the AE will be the only wireless in the building.
I attempt to connect in the following way: On my Mac, I run Airport Utility. From the file menu I select "Configure other" and enter the public IP address of the remote Linksys, and give AE's password. There is a long wait
Reading the Airport wireless device configuration....
while Airport Utility tried to discover AE, and then
An error occurred while reading the configuration..... (-6753)
I suspect that my remote connection problem is due to the fact that the AE is behind the Linksys, and the proper port forwarding is not in place on it to pass the Airport Utility's packets through to the Wan port of the AE. This might be that I have not entered into the Linksys the correct port number to forward on to the AE. I've tried the three numbers in the list:
"Well known TCP and UDP ports used by Apple software products" found at
http://support.apple.com/kb/ts1629
that are mentioned as possibly being involved with Airport Utility; 192, 4500 and 5009.
Advice will be appreciated.
Bob

One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

Does Call Forwarding use Plan Minutes

If I forward iPhone calls to another phone, does AT&T charge me for every minute of the forwarded call (even though I didn't use the iPhone to talk)?? I would like to forward my calls to my OnStar hands free phone system when I am in the car (but don't want to pay Verizon for 30 minutes AND AT&T for 30 minutes for a 30 minute, forwarded call).
Before you say "no way they would do this..", read this from the Verizon call forwarding support page:
+Airtime applies to forwarded/transferred calls even if you send the call to wireline telephones.+
http://support.vzw.com/features/callingfeatures/callforwarding.html

The AT&T people I have talked to "glaze over" when you talk about iPhone. I was hoping just one person in the forum would know (and do this on a regular basis). This answer will decide if I get an iPhone or not. I don't trust an answer from an AT&T call center or showroom floor salesperson. On the other hand, I trust the experts on this forum totally.

Which apache does Oracle Apps use?

I'm trying to install vision operations on a suse, but I got the RW-50015 portal is not responding error in the post check, I reviewed the sugestions (java the J2SE edition, the host address, the missing variables in the httpd.conf,ports etc) and nothing is working, I also did as a test a apache installation (the one that came with suse) and this is working fine, so I'm out of ideas! anyone could help me?
Regards
Emmanuel
Any insight into this issue?
Dapo

Dapo,
Oracle buldles its own module with Apache like mod_ossl, mod_oprocmgr, mod_plsql . It uses Apache 1.3.19 bundled with some of its own modules.
Have you checked whats wrong in error_log at $IAS_ORACLE_HOME/Apache/Apache/logs or is Web Server Up even try to start via scripts mentioned above ?
Atul
http://becomeappsdba.blogspot.com
http://teachmeoracle.com

What port does podcast capture use????

I cannot find any docs on this. I can use Podcast Capture/Podcast Producer when I am IN the network, but not when I am away from the office.
What ports can I open up on the firewall to make this work from anywhere???

Click here for information.
(32067)

Which browser does StageWebView(true) use?

I am using stagewebview with the new native browser support for desktop (' new stageWebView(true)'). I am just try to figure out which browser is used. It appears that windows always uses Internet Explorer regardless of what the systems default browser is. Is this correct? Is there any way to set the browser to Chrome or Firefox if it is the systems default browser?

It uses internal webkit:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageWebVie w.html

Which port does Caller id use?

Similar Messages

Maybe you are looking for