Which port number ?

Hi, I wonder if I can setup Essbase for working on a different port as the standard (that BTW I don't know which one is).Why? the reason is that a need to install a second Essbase server and need both working at the same time.Thanks in advance,Marcelo

This is there in the hyperion knowledgebase: Here is the solution: TCP/IP ports utilized by Hyperion Essbase OLAP Server 1. Hyperion Essbase Agent uses port number 1423 2. Hyperion Essbase Esssvr processes use port numbers 32768 through 33768 in increments of five For example, if three Esssvr processes are running, ports 32768, 32773 and 32778 will be in use Please note that from Hyperion Essbase 6.2 each application process uses two ports in the range.

Similar Messages

  • Which port number should be entered to create an icloud email account?

    Which port number should be entered to create an icloud email account?

    You do not have to use any port number. Just go to System Preferences on your Mac and click on iCloud (OS X 10.7.5 and later).

  • On which port number WDS server will listen & service when installing on server which is also DHCP server?

    hi frineds
    in documents we read when we install WDS on the server which is also DHCP server, we must select this check mark :
    "do not listen on port 67"
    it means we instruct the WDS service not to listen on port UDP 67  to avoid a port conflict between WDS server service and DHCP server service.
    So now on which port number WDS server will listen & service ?
    thanks in advance

    Hi john.s2011,
    If Windows Deployment Services and DHCP are running on the same physical computer, this means that the DHCP server is listening on port 67 and is responsible ensuring authorization.
    The related KB:
    How the PXE Server Works
    http://technet.microsoft.com/en-us/library/cc732649(v=ws.10).aspx
    The related thread:
    DHCP is not responding for WDS
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/07f98ac7-cc6f-4385-ba21-2e85bb460c03/dhcp-is-not-responding-for-wds
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    hi Alex.
    sorry for delay
    thanks a lot
    regards

  • How to find which service using which port number

    Hi,
    Has anybody known how to check which port number is
    being used by what service on WINNT4.0?
    Thanks,

    The netstat command would help.

  • Which port number to use in remote site definition? [was:Help!]

    I recently upgraded from Dreamweaver 8 to Dreamweaver cs6.  I'm having trouble accessing my website because I dont know which port to choose.  I never had to choose a port in Dreamweaver 8.  How does one decide which port to use?  Do you just keep picking random numbers until you get one that works?

    Generally, the port next to your FTP address in the site definition will be 21 by default.
    If that isn't working, you'll need to contact your hosting company to see if they use something else.

  • How to know the port number to which the server process is listening

    I have created oracle 10g Release 1 database(orcl) in Windows Xp Professional edition through DBCA . I also created one more database(sample) manually .
    The ORCL server process listens to port no 1521 and
    SAMPLE server process listens to port no 1522
    Once I start the OracleServiceORCL (Service for orcl) from services.msc and check the listener status it displays
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    But when I start OracleServiceSAMPLE (Service for sample) from services.exe and check the listener status there is no change . Only when i start the instance the dynamic registration takes place with port no 1521 .
    There is no entry for listener parameter in init.ora file . My question is how is the service ORCL able to get itself registered with the listener even before the instance is up ?
    And how can i know which port no is linked with which server process?
    Also if we provide a different port number(other than 1521 say 1522) in tnsnames.ora for a service and consider the listener is listening to both 1521 and 1522 . Now consider that port number 1521 is free . In this case to which port number will the service be listening to ?
    The listener file looks like this
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Db_2)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
    The tnsnames file has the following entry
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1522))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    SAMPLE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = irobo)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    )

    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...[coe]
    The status tells you the instance is up. Starting the service often means the instance gets started also, but whatever "often" means, "READY" means "The instance is up, running and taking callers".
    Your statement that "ORCL [is] able to get itself registered with the listener even before the instance is up" is therefore factually incorrect: you started the service, that started the instance. The instance is up and running. Instances that aren't running don't exist. Things which don't exist don't register themselves. Things which HAVE registered themselves therefore do exist.. and if they say they are "ready", it means they are completely, 100% up and running and behaving quite normally.
    I have not set LOCAL_LISTENER initialization parameter.How is this happening ?
    You only need to set LOCAL_LISTENER if (a) you're not using TCP/IP, (b) you're not using port 1521. Otherwise, PMON is hard-coded to register itself with listeners running on port 1521 and using TCP/IP and you don't need to set LOCAL_LISTENER to achieve that.
    Server Processes do not listen. Listeners do (there's a clue in their name). Listeners receive a call to connect to an instance, they spawn a server process to handle your call, and then they connect you to that server process (or send a message back to you telling you how to contact the server process). Each server process of course receives communications from its dedicated client on a specific port (usually in the 50000+ range), and that port is chosen randomly by the listener when it's spawning it. It's a bit blurry and vague to call that server process port a port on which server processes "listen", however.
    If you're talking dedicated server, each client causes one new server process to be spawned, and there is a one-to-one correspondence between server processes and the port that server process happens to accept client communications on.
    If you're going to ask a listener to do listening duty on multiple ports, I'd first question your need to do that and I'd then point out that unless your client tnsnames.ora knows to talk on the second or subsequent port numbers, the listener is never actually going to make use of that second port.
    In either case, the port the listener listens on has nothing whatsoever to do with the port your client-to-server-process communication ends up taking place on.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • The port number of PI server

    Hi Gurus,
    I have a B2B scenario including our ECC system @ intranet and the target system @Internet, but unfortunately our PI server is not permitted to connect to the internet so it can not reach the target system, now I have to ask our network support to enable the PI server to communicate with internet via some specific port ,so the problem is:
    which port number should i provide to the network support ?, the adapter type we use for this scenario is JDBC
    i know there are many port definition in the ExchangeProfile settings,
    for example:
    com.sap.aii.connect.directory.mshttpport --> 8101
    but i am not sure which port i should use.
    pls advise
    thanks in advance

    Hi,
    Request your basis team to enable your PI Server to Internet connection mode,and provided your PI Server applictaion server IP adress,they will enable it.,
    Regards,
    Raj

  • Which table show port number of R12 application?

    Hi,
    Which table show R12 application port number ?
    Like FND_NODES shows node details.
    Thanks

    Hi,
    You can get those details from the following tables:
    FND_NODES
    FND_TNS_ALIASES
    FND_TNS_LISTENERS
    FND_TNS_ALIAS_SETS
    FND_TNS_LISTENER_PORTS
    FND_TNS_ALIAS_DESCRIPTIONS
    FND_TNS_ALIAS_ADDRESS_LISTS
    For more details about the tables/columns, please refer to eTRM.
    Regards,
    Hussein

  • Warning: Either the server is already running or the port number is invalid. Shut down the MATLAB process in which the server is running or run the server on a different port number.

    安装好SIT后，matlab 提示
    Warning: Either the server is already running or the port number is invalid. Shut down the MATLAB process in which the server is running or run the server on a different port number.
    怎么解决？

    这个应该和SIT无关，意思是你有个MATLAB进程占用了某个端口号或者matlab的服务器正在运行，导致你现在的程序没法建立这个端口的服务器。 试试刀windows进程管理里把matlab相关的进程kill掉，再启动试试。或者参考链接http://www.cnblogs.com/qiweiwang/archive/2010/07/29/1788281.html  里边有关于建立服务器的描述，就在前半部分。

  • How to find port number , when there will be different instance number ?

    In case of portal url,
    port number is 50000 for default instance number 00.
    how to find port number , when there will be different instance number , instead of 00?
    Thanks

    Hi
    You can find the port number by your instance number as follows:
    There is a general format for the port number like you have mentioned.
    For 00 instance the port number is 50000.
    The general format for the port number goes like this:
        <b>5<instance_no>00</b>
    If your <b>instance number is 01</b> then the port number would be <b>50100</b>.
    It depends on the installation type which you perform.
    You can also change the instance number during the installation but normally you dont do this.
    If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
    Hope this solves your doubt.
    If you need some more clarification please lemme know.
    Regards
      Sumit Jain
    **Rewrd with points if useful.

  • Select Listener Port Number from which_table?

    I'm writing a SQL script that, among other things, disconnects from Oracle and then reconnects to the same instance as a different user. I'm able to query v$database and v$instance to get most of the information I need (host, service name, etc) for the reconnect part. The only part I'm missing is the listener port number. I could hard code it to 1521, but that isn't very flexible. Currently, I'm prompting the user (which is normally me) for the listener port number in the SQL script, but that just seems a little bit lame. So my question is this: is there a view or table somewhere in the sys schema that I could use to view the listener configuration? I'm mostly working with 10gR2+ databases.

    cleavitt wrote:
    That is possible, but it needs to be a standard Oracle configuration if the script is to remain generic and portable. The script is actually working fine as-is. I was just trying to go the extra mile and determine the port number automatically. I could also prompt for a TNSNames entry as suggested by others, but I don't always have an entry defined for all of the Oracle instances in my company on every workstation that I work from.
    Here is the script for anyone that is interested. It started out as a script that I found online, but the original did not work with 11g case-sensitive passwords and it only worked for local connections on the server.
    Description:
    Allows a DBA user to impersonate another user (without knowing the user's password).
    Similar in function to using the SU command in Unix/Linux.
    Note:
    This script temporarily changes the impersonated user's password and may cause other
    connection attempts by that user to fail during the moment that the temporary password is in effect.
    WHENEVER SQLERROR EXIT
    SET VERIFY OFF
    ACCEPT username CHAR PROMPT 'Enter the username: '
    ACCEPT listenerport NUMBER DEFAULT 1521 PROMPT 'Enter the listener port [1521]: '
    -- Define substitution variables and column mapping.
    COLUMN username NEW_VALUE username
    COLUMN password_hash NEW_VALUE password_hash
    COLUMN host_name NEW_VALUE hostname
    COLUMN instance_name NEW_VALUE servicename
    -- Populate substitution variables.
    SELECT
    name AS username,
    -- Get the user's password hash(s) and apply appropriate formatting for case-sensitive password if needed (11g+ passwords).
    NVL2(spare4, spare4 || ';' || password /* 11g+ */, password /* pre-11g */) AS password_hash
    FROM sys.user$
    WHERE name = UPPER('&username');
    SELECT host_name, instance_name
    FROM v$instance;
    -- Set the user's password to a temporary value.
    ALTER USER &username IDENTIFIED BY TempPass;
    -- Use the temporary password to connect to the database as the user.
    CONNECT &username/TempPass@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=&hostname)(PORT=&listenerport))(CONNECT_DATA=(UR=A)(SID=&servicename)));
    -- Reset the user's password to the original value using the original password hash(s).
    ALTER USER &username IDENTIFIED BY VALUES '&password_hash';
    SHOW USER
    UNDEFINE username
    UNDEFINE password_hash
    UNDEFINE hostname
    UNDEFINE servicename
    UNDEFINE listenerport
    WHENEVER SQLERROR CONTINUE
    SET VERIFY ONAnd by so doing you just kicked the user's password expiration on down the road, negating the benefit of havng a password expiration.
    Also, you locked out the legitimate user of this account, until such time as you reset it back to the original. And in the mean time, if this happens to be an account used by some automated process, that process doesn't know the new "temporary" password and runs a risk of locking the account from too many invalid connection attempts. Try to become SYSMAN or DBSNMP from this, and you will very quickly kill OEM.
    This has "bad idea" written all over it. What problem is it supposed to be be solving?

  • Node port number :This port is in use.Select another port number-

    I am trying to insalled Informatica 9.0.1 Hotfix2 on my personal laptop and getting below error and was getting same error for 8.6.1, Si i have uninstalled it
    Node port number :This port is in use.Select another port number
    I have tried passing different no like 6005,6006,6007,6008.... but for all it giving me the same error.
    Can any please answer where i can check that which port system is using and what the available values?
    OS: Windows 7 Professional
    DB:Oracle11g

    Hi,
    Goto start > run > enter netstat -o command and execute it and it will display all the addresses. In Foreign Address column the entire ipaddress:portnumber will be display and along with this process id(pid) will be displayed. Check whether the portnumbers are being used by any other application or it is in blocked state. If it is in blocked state then kill that process id with taskkill /pid /f command at command prompt.
    After doing this you can try to install it one more and let us know whether it got succeeded or not.
    Thanks,
    Navin Kumar Bolla

  • Change XML DB default HTTP port number from 8080 to ... ?

    Hi !
    I need to change the default port number of XML DB from port 8080 to something else, because the development server also hosts a web service, which is configured to listen on port 8080 for debugging reasons. This WS is provided by our partner and we have no control over the ports it uses.
    I'm not a network prof. so I'd like to ask what other port number would make sense for XML DB instead of 8080. Can I choose any port number I like, e.g. 8088?
    Besides using DBCA is there any other place I need to configure this new port number?
    TIA,
    Stefan

    I've done this on occasion using the OEM attach to the database and click XML Database then configuration, you will see it on the right window pane.

  • How to hide the PORT NUMBER from the URL

    Hi,
    We have Application on Node 1 and Database on Node 2
    Apps Version: 11.5.10.2
    DB: 9.2.0.6
    We recently added a new node to act as web server for iSupport.
    Now we are able to access the url using public Ip-address which looks like
    http://<Internet Ip-Address>:<PORT NUMBER>
    Eg: http://******.com:8000
    But we dont want the *'PORT NUMBER(8000)'* to be displayed.
    How to hide the port number ?..
    Thanks in Advance,
    Mahesh

    Hi Hsawwan,
    Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
    Regards,
    Mahesh

  • How to change the listener port number on a standby database

    i want to change the listener port number from 1525 to 1545, which is running on a standby database.
    i did the following steps and got some error.
    1. i stop listener and modfy listener.ora
    2. i login in standby DB and issue 'alter system set local_listener='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';'
    3. i login in dg broker and issue 'edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';' and a error coming out ORA-16703: cannot set the property while the database is enabled
    4. then i disable database
    DGMGRL> disable database 'ssmscs';
    5. DGMGRL> edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';
    Error: ORA-16541: site is not enabled
    Configuration details cannot be determined by DGMGRL
    what can i do ? can anybody help me out? thanks in advance.
    Edited by: user1835127 on Nov 19, 2008 2:09 AM

    Hi
    You have to edit the following files in $ORACLE_HOME/network/admin or $TNS_ADMIN/ :
    In your listener.ora on your standby
    MQ_LIST =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = superman.dk)*(PORT = 1524))*
    TNSNAMES.ORA (on your primary and standby)
    MQ_LIST =
    (DESCRIPTION =
    (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = superman.dk)*(PORT = 1524))*
    (CONNECT_DATA = (SID = MQ_LIST))
    after that do
    lsnrctl reload

Maybe you are looking for

  • How to handle RFC exception in XI

    We have developed a proxy-> RFC scenario. But its not able to handle the RFC exception. In case of an exception the response payload is as below <rfc:Y_BAPI_GET_POSTING_PERIOD.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERR

  • Can I create a form that works on android devices?

    I am trying to create an equipment inspection form that uses radio buttons and drop-downs that I can email to customers, download to a server and add attachments such as photos.  I would have an employee inspecting between 1 and 50 peices of equipmen

  • Problems executing exe file outside vignette(HAL)

    Hi, when trying to execute my exe file generated with vignette I'm getting an error: C:\WINDOWS\system32\cmd.exe - cas33.bat The NTVDM CPU has encountered an illegal instruction CS:05a7IP:016b OP:63 65 64 20 77 Chose 'Close' to terminate the applicat

  • HT204380 How to make video call over 3g

    I'm unable make video call ie.facetime over 3G please help me guys

  • Finding tomcat server in a  system

    Hi all, I should write a code in java which searches Tomcat in a any system. So,that on running of that file i should find the tomcat or any server and deploy my war file into that particular server.