Which ports can i use for port forwarding / port mapping??

Hi,
i have set up one port forward with success but am unable to open any other ports it seems.   i am using the following web site to check (http://www.yougetsignal.com/tools/open-ports/)  , and no matter what port number i have tried to port forward, it always comes back with the message that this port is not open.
Mabe I just hit the jackpot with the first port (9080)...and maybe it is only possible to forward a single port....however I would welcome any advice out there.
I am using time capsule, and to port forward i am doing following:
port mapping
+ ener name
leave service blank
public udp ports 9000 (example)
public tcp ports 9000
ip address 10.0.1.x
private udp ports 9000
private tcp ports 9000
<continue>
description xxxxx
service name / type - leave blank
<done>
<update>
please help!!!

Hi,
This linke gives you the informations that you need.
http://zone.ni.com/devzone/conceptd.nsf/webmain/72c6fc6ce4ad4d1386256b1800794596?OpenDocument
TN

Similar Messages

  • Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

    which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

    As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
    One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
    regards

  • For Agilent LCR Meter (E4980), which DAQ can be used for pc interfacing?

    hi, I have Agilent LCR Meter (E4980), I would like to interface with pc by using LabView program. My problem is how to use it and which DAQ card/system suitable for interfacing. Please advice. Thanks.

    My suggestion is that you do some research in Instrument Control. You certainly do no want to use a DAQ card for this. The Instrument Manual chapter 8 gives you your options for control. There is a LabVIEW driver located here.
    Using LabVIEW 2010SP1 and TestStand 4.5

  • Which GID can I use for udev rules?

    Hello!
    In AUR there is a userspace driver package for my smart-card reader (cyberjack). The PKGBUILD doesn't set all things right during installation.
    To use the cyberjack driver the users must member of the group "cyberjack"
    During installation of the package, the group isn't set up, so I have to made it by hand.
    Ok, now the question ;-) I looked around in /etc/group. All udev groups have a number smaller than 100. Is there any specification for this types of groups?
    Next question ;-)
    Is it okay, to make a
    groupadd -G XXX cyberjack in PKGBUILD during installation?
    Greetings,
    Flasher

    Is it okay, to make a
    groupadd -G XXX cyberjack in PKGBUILD during installation?
    It should be ok but you could use it only for your user if you hardwire it there. It's not that big deal to do it by hand. But it gets tiring doing it all the time for different packages .

  • Suggestion for whether CDLC + MIDP platform can be used for this scenario?

    Hi,
    I am developing an agent for mobile phones, with a solution which will cover most of the mobile phones (with OS Microsoft ME, Symbian, Blackberry RIM,..) and PDA's
    Features of the agent:
    Sending mobile inventory details like OS, apps running, etc to a server machine
    Installing apps/patches from server to mobiles
    Will the CDLC + MIDP platform be suitable for this kind of development?
    Thanks in advance.

    J2MENewbie wrote:
    Can you please specify why it cannot be used,Don't be silly. It can't be used because the features and services you require aren't a part of the feature set of Java ME.
    and please suggest which platform can i use for developing this application for mobilesNo idea. This forum is for CLDC and MIDP, not for random programming queries. Use Google for that.
    db

  • Which ports on a macbook pro can be used for start-up disks?

    I'm looking to buy a mac book pro, I'd like to know which ports can be used as an external startup disk, and how would tthe boot speed compare?
    Firewire would seem as if it should boot twice as fast as an external usb2, but can firewire be used as a startup? Can Thunderbolt be used as a startup disk? I havent seen any devices with that interface, but that doesnt mean there cant be, or aren't curently...Any help? Thanks in advance
    Jim

    Just edited the question to reflect what I meant I thought I recalled creating a bootable SD card for my 13" MBP but couldn't be sure. I've tried so many different things and I'm terrible at documenting what I've done. After nearly 20 years in the tech biz you'd think I'd have learned.

  • Wat is the use of ports those are used for EMconsole

    hi all;,
    Could anyone please tell me
    1. the use of the agent,rmi and jms ports used for the dbconsole?
    2. if i block those ports can i use dbconsole?
    3. what are all the ports used for the database like listener, dbconsole http, dbconsole agent etc. and use of those.
    Thanks & Regards,
    Sagar Maram

    What is the use of the rmi and jms ports i mean how those are getting used internally. if block those ports with firewal then wat happend to dbconsole.?They are more appserver related components and to be clear..if the apps and DB are in the same server...then if you block these ports your DBConsole/Appconsole continues to work as long you have not blocked http DBconsole/Appconsole ports...
    But if you apps and DB are across network with a firewall between them then there is a possibility some of the functionality might not work but http console should work as long as http console port is opened in the firewall.....

  • Pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    Hi Venkat,
    Please ask this question in routing/switching forum. As far as i know you can only configure pa-mc-8te1 as E1 or T1 ports. For more details please visit the below link.
    http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/8-port_multichannel_t1-ei_8pri_install_config/8port_t1/2738ovr.html
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful

  • Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    No. You need a converter box like this to go with your MDP-VGA adapter:
    http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

  • Which data sources Can i use for Vendor line items

    Dear Experts,
    I want to load the Vendor Line Items Data.In Rsa5 I found
    0fi_ap_3: Vendors: Line Items
    0fi_ap_4: Vendors: Line Items with Delta Extrcation
    0fi_ap_30: Vendor Line Items
    What is the differences of the 3 Datasources.
    Which Datasource  can i use.In my R/3 side they used EHP3.
    Could you please guide me what is the use of EHP3. What Cude and Dso can I use.
    Thanks in Advance.
    Regards,
    Srinivasan.

    Dear Kulakarni,
    I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
    What is the respective Cube for that  Datasourse.
    I check  0AP_30,but in Business Content that cube is not available.
    Could you please give me guidance.
    Thanks in Advance,
    Srinivasan.

  • Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8  years, and no longer have password.  Any ideas how I can re-access/recover that music?

    Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8  years, and no longer have password.  Any ideas how I can re-access/recover that music?

    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • Is there a custom function available which can be used for logging errors captured in a sp in a sql table

    Is there a custom function  available which can be used for logging errors captured in a sp during and after execution in a sql table?
    Basically we  would like to utilize such function  in every sp and log errors of each sp in a error log table
    Mudassar

    Thanks .
    I was able to write this however I am thinking I am missing something
    CREATE FUNCTION testfunction1()
    RETURNS @temp_error TABLE (
    id int identity(1,1),
    procedure_name varchar(255),
    line_number int,
    error_number int,
    error_message varchar(max),
    error_state int,
    error_severity int,
    occurence_datetime datetime default current_timestamp,
    user_name sysname default suser_name(),
    login_name sysname default suser_name()
    AS
    BEGIN
    insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
    select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
    RETURN;
    END;
    CREATE TYPE test_type AS TABLE(
    id int identity(1,1),
    procedure_name varchar(255),
    line_number int,
    error_number int,
    error_message varchar(max),
    error_state int,
    error_severity int,
    occurence_datetime datetime default current_timestamp,
    user_name sysname default suser_name(),
    login_name sysname default suser_name()
    GO
    create proc usp_error_test
    @test_type AS test_type READONLY
    as
    begin
    begin try
    select 1/0
    end try
    begin catch
    select * from testfunction1(@test_type)
    end catch
    end
    Mudassar

  • Which mobile broadband dongle can I use for my PowerBook G4 running with OSX 10.5.8 please?

    I was given an O2 dongle E173 as a gift but cannot use it as the specification is for an Intel Processor which of course the PowerBook G4 does not have!
    Which dongle can  I use?

    Hi,
    If a USB mobile broadband modem for some reason cannot be used with a certain computer, a good alternative can be a mobile broadband hotspot. This is a device (with a SIM card) that works like a mobile broadband modem, and is capable of establishing a wireless base station. The wireless connection between the computer and the hotspot is normal Wi-Fi. If the computer can handle Wi-Fi, there is no need for any additional software/driver installation. Below is merely one example.
    http://www.o2.co.uk/broadband/mobile-broadband/o2-pocket-hotspot
    Jan

  • AppleCare for Macbook - Which one can I use M8852LL   /A  or  /B ?

    AppleCare for Macbook -
    Which one can I use M8852LL /A or /B ?
    /A is older version /B newer version , I think both are good for Macbook, but can't get a definite answer from Apple. Anyone here know ?
    Macbook 1.83   Mac OS X (10.4.7)   Combo Drive, 2G, 120G HD

    more to say...
    Deciding factor should be price.I've found these folks have the best price on AppleCare.
    http://lacomputercompany.com
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.7)  

  • Interface/class which can be used for obtaining exchange rates of currency

    Is there any interface or class in the java package which can be used for obtaining current exchange rates of currencies ?

    Yes. The people at Sun change the static fields every day to reflect the current prices on the world currency markets at GMT 12:00. Then every day all the java programmers around the world reinstall a new JDK that contains the updated class. The class is called:
    EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble
    To access the Euro-Dollar exchange rate, you write:
    EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble.EURODOLLAR

Maybe you are looking for