Which ports need to be enabled?

I have just updated ITunes and can no longer play music, the diagnostics suggest that it is the Firewall, I use McAfee Fiorewall and it needs to know which TCP or UDP Ports need to be active?? Anybody have an answer, it was all working fine prior to the update!

Hello Yendori,
If you are looking for more information on what ports are used by various Apple products and services, you may find the information outlined in the following article helpful:
TCP and UDP ports used by Apple software products - Apple Support
You may also find this article about configuring the built-in Windows firewall useful:
How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall - Apple Support
Sincerely,
- Brenden

Similar Messages

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

Which ports need to be opened?

I am about to install the SAP Web Application Server Java 6.40 SR1 on Solaris in a highly secure emvironment.
I need to open all the necessary ports in the firewall in advance of the installation. Which ports do I need (as a minumum) to run the portal with KM, Collaboration and trex?
And where do I configure the settings for the P4 protocol? How do I make it run on SSL?

You can pick and choose:
SAP Ports
Scheme               - Example (05) - Port Description
32 + <SYSNO>         -         3205 - ABAP Dispatcher
33 + <SYSNO>         -         3305 - ABAP Gateway
36 + <SYSNO>         -         3605 - ABAP Message
47 + <SYSNO>         -         4705 - ABAP Dispatcher Security
48 + <SYSNO>         -         4805 - ABAP Gateway Security
8 + <SYSNO> + 0     -         8050 - ABAP ITS HTTP
8 + <SYSNO> + 1     -         8051 - ABAP ITS HTTPS
81 + <SYSNO>         -         8105 - ABAP ITS Message Server
5 + <SYSNO> + 00    -        50500 - Java Dispatcher HTTP
5 + <SYSNO> + 01    -        50501 - Java Dispatcher HTTPS
5 + <SYSNO> + 02    -        50502 - Java IIOP
5 + <SYSNO> + 03    -        50503 - Java IIOP Initial Context
5 + <SYSNO> + 04    -        50504 - Java Visual Admin P4
5 + <SYSNO> + 05    -        50505 - Java Visual Admin P4 over HTTP
5 + <SYSNO> + 06    -        50506 - Java Visual Admin P4 over SSL
5 + <SYSNO> + 08    -        50508 - Java Telnet
5 + <SYSNO> + 10    -        50510 - Java JMS
5 + <SYSNO> + 18    -        50518 - Java SDM
5 + <SYSNO> + 20    -        50504 - Java Server Join
5 + <SYSNO> + 21    -        50504 - Java Sever Debug
5 + <SYSNO> + X + 5 -        50525 - Java Server Cluster Element (X=1-9)

Which port need open for Imoprt WS in to the TREE ??

ZfD6.5SP2.
WS----firewall-------NW_SERVER
Which ports ned open on the firewall for import Ws in to the TREE ??
Serg

Serg,
>Which ports ned open on the firewall for import Ws in to the TREE ??
8039
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com

What ports need to be enabled on a firewall to perform an on-device update to IOS7?

I am working in schools using iPads and need to perform IOS7 updates on multiple devices.
I can update by plugging into iTunes but this is a slow process.
When I try an on-device update the iPad downloads the file but fails at the verification stage.
What port would need to be open to allow this part of the update process?
I'm also having issues turning on the switch to allow automatic app updates on the ipad. It turns on then turns immediately off again. Is this the same port?
I know there is a lot of documantation around with all of the ports that need to be opened but the ICT unit at the City Council are not keen to use the scattergun approach.
I'd be really grateful if I could solve this one for the schools I work with.

The Acrobat Family uses TCP HTTP/HTTPS for all traffic. The following processes and ports may be active on a Windows client machine:
AdobeARM.exe - automatic updates - port 443
AcroRd32.exe - brand messages - port 443
AcroRd32.exe - links in documents - anything specified in the URL
Acrobat.exe - brand messages - port 443
Acrobat.exe - links in documents - anything specified in the URL
AdobeCollabSync.exe - Tracker review data - port 443
The same ports are used by the program components on OS X.
There are no inbound listening ports for any elements of the Acrobat Family. Automatic updates are not pushed and there are no server processes within the software.

Which ports need open for:...

Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
Between WS and INETRNET - NAT1 (iptables).
On the other side:
INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
I ask:
Whic ports and protocols (and in whic directions) need open in the NAT1
for Allow VPN connection between WS and BM39 in this configuration.
Serg

On Sat, 09 Feb 2008 12:55:40 +0000, mysterious wrote:
> serg wrote:
>> Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
>>
>> USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
>>
>> Between WS and INETRNET - NAT1 (iptables).
>>
>> On the other side:
>> INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
>>
>> I ask:
>> Whic ports and protocols (and in whic directions) need open in the NAT1
>> for Allow VPN connection between WS and BM39 in this configuration.
>>
>> Serg
>>
>>
> tid10088980
Thank you.
Serg

Which Firewall Ports need to be opened FTP Authentication Problem

Ok, which ports need to be opened on the firewall to allow me to access another sites FTP. I opened 20-21, but still no dice. When I turn off my firewall, I can access them without a problem.
I figure it is some other port that is being used, but I have no idea what one.

Are you running apple default FTP service?
In SA you have al least 2 subnets to control in Firewall Service, one pointng to you LAN, the other (any) is for incoming connections.
Ftp service requires open ports on 20-21 , this is called passive mode restriction, if you have problems connecting you have to open also some higher ports (ex: 49152-65534) to enable non-passive mode.
Try to read /Library/FTPServer/Configuration/ftpaccess and look for a line like this :
passive ports youripnumber 49151 49155 (if not add it)
In Firewall > Settings > Service add ports 49151-49155 to allow only traffic by clicking the "+" button to add the ports. Save and restart Firewall.

What ports need to be open in a version fios Actiontec MI424WR router to share Mac files os 10.7os

I need to share Mac Lion files over the internet through a Verizon FIOS Actiontec MI424WR router. I don't know which ports need to be open.

548 is AFP assuming you are sharing with another Mac

Which ports and ACL ( servers) need to be opened for Jabber Video

Hi All,
We are Cisco partners ( ODC at Aricent New Delhi India) working for multiple Cisco projects.
We want to use Jabber Video for communication but as partners ACL ( Server/ports ) need to be opened to access the Jabber video servers.
Can somebody list me all the Jabber Server/Ports to which Jabber client need access to.
Can somebody please respond asap as we have opened an EXAM case for opening the ACL and need the list asap.
Thanks
Saurabh

Thanks Hoan for the quick reply it answers part of my question.
I also want to know for succeessful video calls which all servers i need access to for eg first it tries on
https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
then it goes to another server's for logging in etc.
I want to know the list of all servers so that ACL's can be opened for them.
Thanks
SAurabh

Which port is need on Linksys QuickVPN access

I want to set up the VPN service on remote site but it site have only one public IP available.I think can I set up the self own Linksys RV042 router in the ISP provided router LAN port and ask ISP use port forwarding to my Linksys RV042 router. So I want to know which port is need on using Linksys QuickVPN to access RV042 VPN client-access. Are there are port 443 and port 60443?
It is existing setup on ISP Router
LAN: 192.168.1.1/24
WAN: only one public IP provided
I will set own RV042
LAN: 172.16.0.1/24
WAN: 192.168.1.50/24 & gateway 192.168.1.1
& ask ISP set port forwarding on ISP provided router forward port 443 & 60443 to 192.168.1.50
Is it possible to provide VPN access to RV042?

Ive got a WRT54GS v6 - Firmware 1.52.5
Ive run out of port forward slots, Ive tried to use the port triggering but it always says
"port forwarded range is overlapping with other port trigger records"
Ive checked and no ports are overlapping, one person suggested that I try just using the forward slot instead of the trigger slot as well. When I click save changes it says succesful but then when it returns to the port trigger page everything is blank. no changes made.
Everything has worked fine until this, im trying to get EA Games "Command and Conquer: Red Alert 3" to work online but the router is not co-operating very well.

HT201401 Need help to enable my 3g iPhone which has been disabled due to forgotten passcode

HI....Need help to enable my3G iPhone which has been disabled due to forgotten passcode.Thank you

If you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode and restore as a new device. See http://support.apple.com/kb/HT1212.

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplayer?

Which TCP/UDP ports need to be opened on a firewall for adobe reader and flashplaer to operate properly? This would include updating, linking, and any subset of features.

The Acrobat Family uses TCP HTTP/HTTPS for all traffic. The following processes and ports may be active on a Windows client machine:
AdobeARM.exe - automatic updates - port 443
AcroRd32.exe - brand messages - port 443
AcroRd32.exe - links in documents - anything specified in the URL
Acrobat.exe - brand messages - port 443
Acrobat.exe - links in documents - anything specified in the URL
AdobeCollabSync.exe - Tracker review data - port 443
The same ports are used by the program components on OS X.
There are no inbound listening ports for any elements of the Acrobat Family. Automatic updates are not pushed and there are no server processes within the software.

Which ports does Webi Rich CLient use to connect to Universe etc..

Hello together,
we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
It will always say universe not found. Login to rich client and everything else is possible.
It's not an authorisations problem, inside the network people can run the programs fine.
Thank you

Hi,
i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

Which ports are required by ODMA?

I am an SAP R/3 administrator.
I want to upgrade from Oracle 8.0.6.3 to 8.1.7.3 under AIX 4.3.3
So I need to use the RUNINSTALLER followed by the ODMA
I want to do this remotely, passing out through one firewall then in through another.
My X-emulation is ReflectionX, for which I already have firewall transparency for port 6000 .
My question: Which ports are required for RUNINSTALLER + ODMA
Thanks in advance,
Keith

Hi Keith!
This forum deals with issues specifically related to the Oracle Migration Workbench product. This product is used to migrate non Oracle databases to Oracle8i & Orace9i. (It does not enable you to migrate from one Oracle database version to another!)
In order to get assistance in performing a migration frrm one Oracle database version to another you should contact Oracle RDBMS Support. You should be able to find their contact details in the Documentation that comes with ODMA.
hope this helps
- Garry

Which ports to open in PIX for outgoing Cisco VPN client connections ?

I have Cisco vpn clients behind the PIX and i want them to connect to a vpn 3005 which i behind another PIX . Can anybody tell me which ports i have to open on both the PIX firewalls ?

It depends on how you have deployed your VPN Remote Access users.
By default, if you enable IPSec-Over-TCP or IPSec-over-UDP, then port 10000 is used for both, these methods are Cisco Proprietary and can be changed.
If you use NAT-T (NAT Traversal), the Standards-based implementation, then it uses UDP-4500).
either way, the operation of the VPN depends on:
1) Whether these service have been enable on the VPN Concentrator
2) Enabling the relevant transport settings on the VPN Client connection Properties.
Regarding the PIX infront of the VPNC3005, you will need to allow these above ports inbound to your VPNC3005 Public interface.
Locally, it depends if you filter outbound connections through your PIX. If you don't, then the PIX will allow the connection for the VPN Client attempting to access the remote VPNC3005

Which ports need to be enabled?

Similar Messages

Maybe you are looking for