Which ports oracle use for replication..

Hi All,
I want to know which ports orcale use for replication.plz reply me quickly.
Thanx in advance

This is configurable. By default, listeners will run on port 1521, but sites can specify multiple and/or different ports. Depending on the OS of the database, connections made on that initial port may be redirected to a different port (Windows) or may do all the communication on the listener port (Unix). Windows databases can be configured to do all communication on the listener port, though there may be a performance impact to doing so.
Justin

Similar Messages

  • Which port to use for the peer-keep alive

    Hi All,
    We have 2 Nexus 6001s in our data center.
    The management port of each 6001 is connected to the other and this link is used as the peer keep alive link.
    My colleague is suggesting that we use one of the inline data ports as the keep alive link.
    Can you please advise on the pros and cons of using management/inline port as keep live link and the best practise to follow in this case?
    Thanks,
    Pete

    Hi Pete,
    Here are the best recommendation in order of preference.
    1. Use mgmt0 (along with management traffic)
         * Pros: whats good on this option is you are totally separating the VPC Peer keepalive link on another VRF (management) and does not mingle with the data or global vrf..
         * Cons: VPC PKL is dependent on the OOB management switch.
    2. Use dedicated 1G/10GE front panel ports. 
        * Pros - can just be a direct link between the N6K pair and not dependent on other boxes. 
        * Cons - you need extra SFPs for VPC PKL while the VPC PKL traffic join the global VRF.
    HTH
    Jay Ocampo

  • Which ports are used by LMS 4.2.5 Software Center

    Hi everybody!
    we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
    Which ports are used for the download (for firewall configuration)
    I can't find the used ports for this function in the install guide.....
    I am very thankful for any suggestions!
    Edit:
    here is the log output:
    [ Sun Jan 04 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    [ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort]  : No proxy port confgured
    [ Sun Jan 04 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Mon Jan 05 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    [ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost]  : No proxy Host configured
    [ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort]  : No proxy port confgured
    [ Mon Jan 05 00:30:01 CET 2015 ] ERROR  [CcoDownloadAdapter : getXmlFileList]  : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
    there is no proxy in use, so the is none configured :)

    Hi,
    Looks like you are encountering this BUG
    CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
    Try this to resolve the issue::
    Stop Daemon Manager
    2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
    file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
    NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
    NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
    TO
    NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
    NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
    3.            Start the Daemon Manager.
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Which CKM is used for moving data from Oracle to delimited file ?

    Hi All
    Please let me know Which CKM is used for moving data from Oracle to delimited file ?
    Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

    Addy,
    A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
    Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
    Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
    HTH

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • Which ports are used by oracle datbase and management agent other than 1521

    Hi,
    Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
    Regards,
    Rjiv.

    Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

  • Which network is Oracle using for RAC traffic ? where you will get info ? ?

    Hi,
    I am using two node RAC on Oracle 10g R2 (10.2.0.3.0) version on SUN Solaris 10 . I want to know "Which network is Oracle using for RAC traffic ? where you will get info "
    --Kumar                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Kumar,
    In 10g, you can query x$ksxpia. If the cluster_interconnect information is stored in OCR (default), you will get
    SQL> select INST_ID,PUB_KSXPIA,PICKED_KSXPIA, NAME_KSXPIA,IP_KSXPIA from x$ksxpia;
    If you specified the cluster_interconnects parameter in your init.ora:
    Columns to look in : INST_ID P PICK NAME_KSXPIA IP_KSXPIA
    And also you can use 'oradebug ipc' to see which interconnects the database is using:
    SQL> oradebug setmypid
    SQL> oradebug ipc
    Hope it helps...
    Thanks
    LaserSoft

  • I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    Yes, you can.

  • Which port is open for connection ?

    how could I know which port is open for connection ?
    In the java, I use JDBC to connect to Oracle,
    connection = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:sid", "scott","tiger");Do we have a command to show open port ?
    Thanks.

    What is your Oracle version, and do you use dedicated connections or "shared servers"? From your port number invoked (1521), I'll guess you use dedicated connections. In that case, the listener (located at 1521) will "spawn" a dedicated process for your session, and tell this process to start on another port (usually falling on a certain range, depending on your OS). An easy way to see this would probably to turn listener tracing on. Here's what I found in the log file after I started a new (dedicated) session on my 10.2 DB:
    "22-OCT-2006 21:31:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ora102)(CLIENT_REGISTRATION=ora102)(CID=(PROGRAM=C:\oracle92\bin\sqlplusw.exe)(HOST=DANIELROYLAPTOP)(USER=Daniel))(CLIENT_REGISTRATION=ora102)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=3198)) * establish * ora102 * 0"
    HTH
    Daniel

  • How to specify which cert to use for software virt server?

    Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

    No, this is not possible due to limitations of the underlying protocols.
    HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
    Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
    You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • Which tool is used for database designing

    Hi,
    Can you please share which tool is used for database(Oracle) designing most
    Thanks

    Kim Berg Hansen wrote:
    Personally I use brain, pen and paper for designing/modelling - then simply write scripts to create those tables.Me too.
    But of course I realize that is not the way of a modern programmer :-)No, modern programmers rely less on the brain part.
    I have heard other people saying that the (now free) [url http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html]SQL Developer Data Modeler is helpful for modelling. I haven't any personal experience, though.
    I have used it to reverse engineer the design resulting from the brain / pen / paper / scripts process and produce pretty pictures for the modern programmers to try and understand. It works quite well for this.

  • Which tool you use for your datamodel?

    Which tool you use for your datamodel?
    To show your tables with pk and fk and all.
    designer
    jdev
    other?

    I am using ERwin® Data Modeler r7.1 (7.1.1.1207). It supports most new features of Oracle 10g such as hash, list, composite hash, setting LOB storage properties etc.
    We just upgraded from version 4 recently. In the old version, I had to manually modify the generated scripts.
    ERWin r7 supports all Oracle 10g (Release 2) new features we need for our projects. It offers far more functionality and options than the old version. It supports all partition types in Oracle 10g: Range, Hash, List, Composite-Hash and Composite-LIST and offers more storage settings.
    Another nice new feature of ERWin r7 is that it offers purge option in the DROP TABLE statement. In Oracle 10g, the recycle bin contains all the dropped database objects until you permanently drop them with the PURGE option. Otherwise, you will see many funny looking objects like this: 'BIN$0+ktoVChEmXgNAAADiUEHQ==$0'.
    With the purge option, you don't need to purge the recycle bin after the forward engineering.
    SQL> purge recyclebin;
    My favorite is Oracle Designer.
    http://www.oracleabc.com/forums/thread-24-1-1.html

  • What do you use for replication to your DR system?

    Hello,
    I'm wondering what everyone uses for replication to their DR systems?  Do you use a hardware or software solution and which one?  Are you happy with the results?  We currently use MIMIX HA1 and have been having problems getting our audits to run once we upgraded to ECC 6.0.  There seems to be so many tables, that the audits cannot finish.
    I am wondering if anyone else uses Mimix and has better luck on ECC?  Or do folks use something else and have better luck with it. 
    I appreciate any input you might have.  Thank you.
    ~TJ

    Hi TJ
    We are running a i570 with 2 power 5+ and 15 GB's of mem.
    But looks like you shud be ok on the hardware side. 1 cpu and 72gb is good enough to handle the audit
    It takes us close to 5 hours to run the FILDTA on the production library. plus since we run it only once a week, we run it at level 30( 100% i believe)...
    And yes, we run it from the traget side, as that is the mgmt system. you can't run it from the network system. Looks like your mgmt system is the source in your case.
    There are a lot of thing which are unknown to us about your system/configuration.
    The data group you are running in FILDTA, whcih had the production library could be having other objects as well, which would definitely increase the timings...
    Also a factor would be the network connection between the source and the target...
    Also what the release of HA lite you are running? We are running version 6.
    Let me know if you have any other questions...
    Thanks
    Abhi

  • Which method is used for event creation

    Dear All,
    My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.  
    I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for  BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
    As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
    Can some one guide me, how can I found that which method is used for event creation in different pur org?
    How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation. 
    For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module'  for all the workflow - WS92000030, WS92000021 etc.
    Thanks in

    Hi Sahu,
    I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
    Istead what i think is, they might have given the Event Condition for each workflow.
    In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
    Please check this.
    Regards,
    Gautham

Maybe you are looking for

  • Erase Imperfection in First Frame -  Carry through Rest of Video ???

    I just imported into Photoshop a 4 minute video clip of me talking before a group of people. the video was shot from the back of the room and my hair is sticking up in the back, which is noticeable and distracting every time I lean my head forward as

  • Why are the weblogic.kernel.Default Execute Threads used by WLS Kernel

    In my Admin Console, it's displaying 10 out of the 15 weblogic.kernel.Default Execute Threads are used by the WLS Kernel user. The total requests column for these threads are showing 0. The other 5 threads are showing 20K to 40K requests. Why is the

  • Manual bank statment

    Hi Gurus Statement 189 dated 09.10.09 did not post to the relevent GL. No document number was generated but thi in FF67 it shows that all the documents posted any help please? kind reagrds Sunitha

  • Collaboration server failed to start...how to fix it?

    I kept getting the "Collaboration Server failed to start because: Could not start Collaboration Index Manager" error message...how do i correct this? Thanks BC

  • Take screen shot with AIR application

    Hi, Anybody know about how to capture screen shot of our screen with an desktop AIR application? I need to create an desktop app with screenshot taking feature. Thanks