Which power adapter should I use?

yes hi I was wondering, if I get a power adapter for my ipod nano which, which one should I get? I have a 2Gb nano if I we're to purchase one which one should I get? I've knowdest that there are 2 kinds of
adapters one of them is for the 10,20,30 or perhaps 40 Gb ipods and the other is for lesser Gb's both packages would say all for ipod models for both adapters. I'm not really sure which one I should get.

Yes, the UK system is far safer than that in Europe. Each of your items should have their own fused plugs, rated as appropriately, then connect to the power surge strip, which is itself protected only up to 13 amp.
You can read about fuse ratings here:
http://www.davesdiytips.com/2009/08/fuse-ratings-in-plug-tops/
Short answer: use more than one power surge strip, do not plug them into each other, and use separate wall sockets!

Similar Messages

  • Which wattage adapter should I use with the composite cable with my iPad?

    Which wattage adapter should I use with the composite cable when connected to my iPad while watching T. V. .

    Ultimately, use the power adapter that came with the iPad. But you should use any USB based power adapter that has a 10 watt/ 2 amp or higher power rating. Look close when buying a thrid party adapter, if it does not specify 10 watts/2 amps it is a lower 5 watt/1 amp charger that will not work.

  • Which power adapter should have come with my 15" Macbook?

    I got a 15" Macbook Pro at Christmas this year and I just looked at my power adapter and saw that it's a 60W, although I thought it should have been an 85W one. My computer does charge when I'm using (and rather quickly too, I might add), but I was just kind of wanting some clarification on this. I'm looking to buy a second power adapter to have one at my house and one at my boyfriend's house. He currently is using a 13" black Macbook (circa 2006, I believe), but is looking to get a 15" Macbook Pro in the future.
    Anyway, I'm just wondering what power adapter I need to purchase, and check that I was indeed given the correct charger to begin with. I don't know how to find my model number, but it was the cheapest of the 15" models at the time. Thanks for your help!

    Eh, not quite: You can use any Intel MB with any Magsafe adapter, but the use of it will vary.
    I use my 17" mid-2010 i7 MBP with a 60W adapter from time to time if it's the one in a convenient place, I've even used it with the 45W only Airline adapter. Note the MacBook's power system is quite smart. If the system is on and active and it needs to restrict the power drawn, charging the battery will be the first to go, and then external power will be supplemented by battery power. So with a 15" or 17" MBP: on an 85W adapter you can play a 3D game and charge at the same time. Whee! Charge time is lessened if you draw less power and minimized if you power off the system and only use the available power to recharge. On a 60W it's possible to draw enough power using the system that charging will take an impractical amount of time. Power the system off and it'll recharge almost as fast as the 85W. With a 45W or airline adapter it won't recharge at all, and if the system is pretty busy, power will be draining from the battery too, albeit at a slower rate than if you were on battery only.
    Think of the MacBook's power system as a water tank with an inlet hose and a drain hose. Inlet hoses come in three sizes, if your inlet is larger than your outlet you can fill the tank (recharge) at different rates depending on the drain (Air, 13", 15", 17" and how busy). The only exception where the analogy breaks down is if your drain is not the smallest (Air) and you use the smallest inlet (45W adapter), you can't fill the tank even if the drain is closed (MB is off).
    If you want the other gory technical detail, only the 85W Apple adapter can switch up the 16v to 18v to allow for a faster recharge on the 15" and 17" MBP.
    Probably more than you wanted to know...
    Bottom Line: If you want to be able to charge any MagSafe MacBook, get an 85W adapter, Apple charges the same for the 60W as the 85W, and the 85W is only a little larger these days. (3rd party Magsafe adapters, not so much, the 60W's are usually a few bucks less.) 85W is what you'll find at the training tables in an Apple store BTW.
    Don't bother with the $50 airline adapter if you don't own an Air. There are several 3rd party Auto/Air MagSafe adapters that will charge a 13" -17" MBP in the air or on the road.
    James

  • Which file type should I use and how I use it?

    Hello!
    I need to create a file with some data that has been inserted manually.
    In this file, for example, there are:
    ProjectName1: string1, string7… string10, date1
    ProjectName2: string11, string15… string20, date2
    ProjectNamek: string 100, string 116 … string 140, date1
    I know only one thing: one of the strings.
    What I need to find in the file:
    I need to find the string at one of these rows and get its ProjectName and date.
    For example: if I have string15,
    I should find string15 in the file, and get its ProjectName and date:
    ProjectName2, date2
    Which file type should I use and how I use it? What is the best solution?
    Thanks!

    800512 wrote:
    I need to create a file with some data that has been inserted manually.
    In this file, for example, there are:
    ProjectName1: string1, string7… string10, date1In addition to Pandiya's advice, if the string is always in exactly the above format
    (ie:
    1. ProjectName always starts the line and ends with a ':'.
    2. The rest of the strings on the line are separated by ", " and will never contain ", "
    you might also want to have a look at String.split().
    Winston

  • HT4839 Which apn setting should I use for my iphone 4 on net10

    Which apn setting should I use for iphone 4 on net10

    APN Settings for Net 10
    Cellular Data
    APN: att.mvno
    Username: (Blank)
    Password:(Blank)
    MMS (Blank)
    APN: att.mvno
    Username: (Blank)
    Password: (Blank)
    MMSC: http://mmsc.cingular.com
    MMS Proxy: 66.209.11.33
    MMS Max Size: 1048576
    MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
    Type exactly whats on here on your settings.
    Procedure:
    1- Turn on your phone
    2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
    3. Goto Settings>General>Cellular>Cellular Network
    At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
    4. Get your paperclip take out the tray put in the Net 10 sim card
    5. Goto Cellular>Cellular Network while it's searching for service
    6. Type in your settings that I list above
    7. Scroll back to your main setting (Do not press your Home Button)
    8. Once you see your service up and running try out your web and send a picture message it should work.
    9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
    10. Do the process all over again
    Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

  • Which audio format should I use on my memory stick?

    Hi. My car has a Clarion HDD Navigation System MAX575 which is compatible with audio CDs and has a memory stick slot. I can't play MP3 CDs. Which file format should i use if I want to load music onto the HDD using a memory stick? I don't want to remove the unit.

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
    6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

  • HT1206 I buy apps in my iPhone using different Apple IDs. Which Apple ID should I use to authorize the computer when synchronizing iPhone with iTunes?

    I buy apps in my iPhone using different Apple ID. Which Apple ID should I use to authorize the computer when sync iPhone with iTunes?

    Hi again,
    After a little further research, it appears that you would need to create separate iTunes libraries in order to be able to continue to purchase and download previously purchased items on the same computer, for two different Apple IDs. Sorry - but my husband and I have had the library we sync with authorized for so long, that we have not run into this issue, but it appears that you will get an warning when you try to authorize the second ID on the same computer, indicating that another ID is already associated with it.
    So, you will probably have to set up separate iTunes libraries for each ID:
    http://www.imore.com/how-use-multiple-apple-ids-one-computer-and-itunes
    Sorry for any confusion - hope this helps!
    Cheers,
    GB

  • Which uesr exit should I use by such a case

    The requirement is to send the email to manager when anyone create or change the Material data by using MM01/MM02.
    The function of sending email I have done but I don't know which user exit should be used to call the function.
    I have tried  MGA00001 >EXIT_SAPLMGMU_001>INCLUDE ZXMG0U02 and writed some code in the ZXMG0U02. (ex: break point) .but when I modified the Material and saved,the stop does not appear. whether I used a wrong user exit?

    You can use enhancement MGA00001 (industry only) for this.
    For more information, see the documentation for the following components assigned to this enhancement:
    Function Calls :
    EXIT_SAPLMGMU_001
    Enhancement Number : MGA00001
    If you want to send a mail for only material creation/ extend then you can you the badi BADI_MATERIAL_REF.
    we don't have BADI 's for Change the Material master records.
    If you want to send a mail for MM02 also then you can go for the Enhancement ' MGA00001' under the function module 'EXIT_SAPLMGMU_001'.
    Thanks
    Sekhar

  • Which color profile should I use?

    I'm getting into doing some freelance graphic design, and I've been playing around with my awesome new C2D Macbook Pro. I am wondering, which color profile should I use? It's set on Color LCD, but I'm wondering about Adobe RGB or Apple RGB would those be better?
    Thanks!

    I personally am a fan of the sRGB on the Mac. I think the blue comes out very nice when comparing it to the others.

  • Which HttpClient class should I use for Universal apps?

    Hi,
    I am developing a Windows Universal app for Windows phone and WinRT in C# and I would like to know which HttpClient class should i use? Should I use the System.Net.HttpClient or Windows.Web.HttpClient?

    Because the System.Net.Http and System.Net.Http.Headers namespaces might not be available in future versions of Windows for use by Windows Store apps. It is stated in the official documentation on MSDN here:
    https://msdn.microsoft.com/en-us/library/windows/apps/xaml/dn469431.aspx
    "Starting with Windows 8.1 and Windows Server 2012 R2, use Windows.Web.Http.HttpClient in the Windows.Web.Http namespace and the related Windows.Web.Http.Headers and Windows.Web.Http.Filters namespaces instead for Windows Store apps."
    And the Windows.Web.Http.HttpClient class is supported from Windows Phone 8.1, Windows 8.1 and Windows Server 2012 R2:
    https://msdn.microsoft.com/en-us/library/windows/apps/xaml/windows.web.http.httpclient.aspx
    Hope that helps.
    Please remember to close your threads by marking all helpful posts as answer and then start a new thread if you have a new question.

  • Which kernel module should I use for Marvell Yukon 88E8001?

    Which kernel module should I use for Marvell Yukon 88E8001?
    a. sky2
    b. skge
    c. sk98lin

    I found this in the kernel''s /driver/net/Kconfig:
    config SKGE
    tristate "New SysKonnect GigaEthernet support"
    depends on PCI
    select CRC32
    ---help---
    This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
    and related Gigabit Ethernet adapters. It is a new smaller driver
    with better performance and more complete ethtool support.
    It does not support the link failover and network management
    features that "portable" vendor supplied sk98lin driver does.
    This driver supports adapters based on the original Yukon chipset:
    Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
    Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
    It does not support the newer Yukon2 chipset: a separate driver,
    sky2, is provided for Yukon2-based adapters.
    To compile this driver as a module, choose M here: the module
    will be called skge. This is recommended.
    Looks like your module is "skge"

  • Which jar file should i use ??

    Hi,
    Which jar file should i use to import the following:
    import org.apache.commons.lang.exception.NestableRuntimeExceptionI am getting package does not exist error.
    Please help.
    Thanks !

    one of the apache commons Jar files... make sure they're in your classpath.

  • Can some one plz tell me which customization tool should be used to package Adobe Audition CS6

    Can some one plz tell me which customization tool should be used to package Adobe Audition CS6

    Sorry, you will have to give us a LOT MORE DETAIL about what exactly you are trying to do!
    As written, I'm afraid your question makes no sense.  Why do you need to "package AA CS6"?

  • Which power adapter and cord to order?

    Aloha, I cannot figure out which power adapter and cord to order for my Mac OS X 10.7.5.  Does it matter if it is a Magsafe or Magsafe 2?  I have a T shaped connector.  The 15-inch Mac Pro  is early 2008.  Mahalo!

    Hello james516,
    Your MacBook Pro utilizes an 85 watt power adapter with a MagSafe adapter.
    85W MagSafe Power Adapter with cable management system
    MagSafe power adapter port
    MacBook Pro (Early 2008 and Late 2008) - Technical Specifications
    http://support.apple.com/kb/sp4
    This power adapter can be purchased at the link below.
    Apple 85W MagSafe Power Adapter (for 15- and 17-inch MacBook Pro)
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Cheers,
    Allen

  • Which jdbc driver should be used for sqlserver 2000 and where to put it.

    hi all,
    My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
    The questions are:
    1. which jdbc driver should be used for sqlserver 2000?
    2. which folder to put it in?
    3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
    failed tries:
    i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
    1. .../oracledi/drivers, and set this path to CLASSPATH.
    2. .../oracledi/userlib didn't exist, i created it and put the driver in.
    3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
    All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
    my environment is:
    os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
    ODI: 11g, installed in /users/oracle/odi/
    please help me,thanks a lot.
    jun
    帖子经 Jun编辑过

    Hi,
    You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
    What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
    Drivers folder in ODI 11g is under
    C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
    if you are using the standolone version
    On windwos :
    C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
    on linux
    $HOME/.odi/oracledi/userlib
    Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
    Thanks,
    Sutirtha

Maybe you are looking for