Which providers support SPA9000?

Which poviders are currently allowing SPA9000 to use their service? I am on vonage right now, but need auto attendant and better features for our very mobile and semi virtual office.
Also, can a Vonage provided PAP2 or Router PAP (both LinkSys) be configured to work with SPA9000 systems.
TIA, Steve

I would have to agree with the previous post... my small business uses Zingotel, and their support has been generally very poor.
Every time I call in I get an automated message saying I am 4th on the call list and wait time is 4 minutes. Usually you will wait on hold for about 20 minutes, and then 4 out of 5 times your call gets dropped/disconnected and you get to repeat this process.
When you do get through you will get an untrained call center employee (with a heavy accent) that will try to trouble shoot your problem following some manual, usually unsuccessfully, and then offer to send and email on your behalf to a more knowledgeable Zingotel support person. At this point you must wait for them to contact you; sometimes they call you back within a half hour, but I have often waited 4-7 days with multiple calls and emails before I get a response.
To be fair, I must say that the REAL Zingotel technical support folks are very good. Once you do get a hold of one, they are very knowledgeable, pleasant, and fix things quickly. ..It is just very hard to get through to them.
For most people, especially businesses, losing phone service for 4-7 days every 3-4 months in not acceptable.
If anyone knows of any companies out there with good support for the SPA9000, please post your experiences, I would like to find one!
UPDATE:
I have discovered that I can get pretty good support from Zingotel if I don't try to contact them by phone.. Sending emails to [email protected] seems to bypass the useless call center people and gets pretty quick and helpful responses (by email) directly from the Zingotel people.
UPDATE: 9/2007
Turns out I jumped the gun when I said the email support was better. I got a couple of quick replies that I thought were going to solve our problems... to make a long story short, we are now changing service providers to teliax...
I'll post an update later on how this goes...
Message Edited by travisn000 on 08-15-2007 06:27 PM
Message Edited by travisn000 on 09-26-2007 09:30 PM

Similar Messages

I have a G5 which I intend to keep. Now that I have updated my iphone 4s to iOS 7.0. I cannot add music to my iphone or upload photos to iphoto. I have the last itunes 10.6.3. which was supported by apple. itunes will not interact with my iphone on an

I have a G5 which I intend to keep.
Now that I have updated my iphone 4s to iOS 7.0.
I cannot add music to my iphone or upload photos to iphoto.
I have the last itunes 10.6.3. which was supported by apple.
itunes will not interact with my iphone on any level.
Apple made all the equipment I use.
Bentley and Ferrari etc do not stop making parts for their cars?
The least Apple could is.
A. Update itunes to run on a G5
Regarding iOS 7.0 you have totally lost the plot.
We buy apple why?
Quality.
Intuitive interface.
Stable software.
Design.
All that Steve Jobs consider sacrosanct.
Quality is about ongoing support longevity of product.
Its not about trying to sell to every person on the planet, others are way ahead of you.
So try respective the customers you have, it wont be long before theirs a better operating system and your lead in hardware is marginal.
Regards
Glyn Evans
My post on facebook this morning.
If you have an iPhone or iPad do not update to ISO 7 unless you want an operating system that looks like windows 8. The graphics looks like it was designed by a artistically challenged mongoose and the operating system is not intuitive something apple users expect. Overly complicated ugly and generally change for the sake of apples paranoia since the death of Steve Jobs.

You need to update iTunes to 11.1 on your PC

How can I get a list of apps which are supported on ipod touch model ma623zo?

How can I get a list of apps which are supported on ipod touch model ma623zo?
It's about 6 years old I think.
I have put the latest IOS on there (currently 3.1.3 (7E18)).
I download apps from the app store but they often fail to launch. I assume they're incompatible.
Is there a way to check which apps will work and which won't before I buy them?
Thanks!

I have no idea how my reply could be "misleading". I stated the exact situation: there are millions of apps in the iTunes Store, and providing a comprehensive, accurate list of which apps support which version(s) of iOS would be highly impractical. You can perhaps help with your search by going to AppShopper:
http://appshopper.com/search/?search=iOS+3
That will give you at least some starting points, but AppShopper is neither comprehensive nor completely accurate. I've found a number of apps listed there over the time the site has existed that either are no longer offered or which have been updated beyond the iOS version indicated. But it might help.
Regards.

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

I had IDM 7.3.10 Kindly let me know which version supports this IDM

Hi,
This is Naved I only use firefox and i have IDM 7.3.10 before it was working with firefox, i dont remember which version, by chance i updated firefox and the latest dosnt support IDM kindly let me know which firefox support this version of IDM .
Best Regards
Naved

hello, please refer to www.internetdownloadmanager.com/support/firefox_integration.html

MS Access database limits which LabVIEW Supports

MS Access database limits which LabVIEW Supports,
When i fetch 10MB database,then LabVIEW shows some error. which i am attaching with this post. please guide me on this.
Prashant Soni
LabVIEW Engineer
Attachments:
1.jpg ‏3001 KB

Ravens Fan wrote:
How do people who don't know how the forum works and the basic standards of posting .png's or .jpeg's, ever figure out that they are capable of bypassing the .bmp ban by just renaming the file? If people are smart enough to figure out that a bitmap file with .jpeg extension still opens, you'd think they were smart enough to realize what file format they should really be posting.
They assume changing the file ending actually changes the format?
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

Which NetWeaver supports JDK1.5

Hi,
Is there any NetWeaver system, or Enterprise Portal, supports JDK1.5? I've built a repository manager using jdk1.5 and tried to upload it into my EP, which is SAP NetWeaver 2004s SR2 (SP9) downloaded from https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6, but it fails to start. In http://localhost:50100/ - System Information, it shows that jdk1.4.2_09 is supported.
So which EP supports jdk1.5?
Thanks,
Ray

Hi Ray,
It's true that NW releases currently in GA on the market support JDK1.4.x only.
However, there's a preview server, which supports JDK1.5, as well as is Java EE 5 certified. However, this can be only used currently for test/evaluation purposes only.
If you're interested, you can get it from <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da699d27-0b01-0010-99b0-f11458f31ef2">here</a>.
Hope that helps!

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this when it just stopped working today?

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix the problem when it failed just today?

If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252)

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?

I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?

If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252)

When will a new C++ compiler version be released which will support C++11 ?

The current version 12.3 does not support the new language features.
Could you please share a roadmap; which features will be supported when?

Oracle does not pre-announce product details or release dates, but a new release is in the works. Watch this space for announcement of an open Beta release of Solaris Studio, which will support C++11.

Which BB supports OWA?

Hi everyone,
I checked the product info on the BB-HP but I could not find this: which BB supports e-mail functionality over OWA? E.g. we have a Pearl 8100 and it does not...
If someone has a list or can provide a link this would be great!
Kind regards,
Robert

you can forward the emails inside Outlook Web Access to your BIS account. Please read this article from the public knowledge base:
http://www.blackberry.com/btsc/KB03133
Associate a Microsoft Outlook Web Access email account with a BlackBerry Internet Service account
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Which driver supports the previous, next, last, first methods defined in jd

which driver supports the previous, next, last, first methods defined in jdbc2.0?

erm... all JDBC2.0 drivers.
Check out http://industry.java.sun.com/products/jdbc/drivers u can do a search for JDBC2.0 Drivers.
Hope this helps!
Sam

Which Macs Support Jumbo Frames?

Is there a list anywhere of which Macs support Jumbo Frames and which don't? I can tell my Mac Pro does, and my MacBook does. But sadly, my G4 does not, even though it has gigabit ethernet. Unfortunately, the G4 is my home server so it's the computer that would benefit me the most by supporting them. Just going from my mac pro to macbook, my transfer speeds jumped from 40MB to 50MB/sec. And that may have been bottlenecked by the MacBook's hard drive.

Hey l008com,
Is true
http://img38.imageshack.us/img38/6452/picture1rox.png
How the heck do you embed an image in this forum?
Add a ! between the link like this (I add the " " between it so you could see).
"!http://img38.imageshack.us/img38/6452/picture1rox.png!"
and with the " " removed ...
!http://img38.imageshack.us/img38/6452/picture1rox.png!
Anyway, GET IT NOW? 1504 is the limit, even though it's the built in gigabit ethernet on a dual 800 quicksilver G4.
But anyhow now that I have more info about your G4, does it have a built-in 10/100/1000BASE-T Ethernet connector and four-port 10/100BASE-T Ethernet PCI card (RJ-45 connectors)? If I'm correct about this then the gigabit port is an Uplink Port for a Hub, a Switch, another Server, Access Point or some other Network Device. I know that's not much help but the more I know about about your existing Network Setup, the less I guess about it. One thing to keep in mind is that your ISP Internet Connection is slower that 10MB/s anyway plus the their MTU's are NOT the same size and I know why.
But that really doesn't much if your Network Speed is more important than the Internet Speed.
Later ...
Buzz

Which cards support AS

Hi,
I'm in the process of specifying some computers that will be in a music technology classroom (school). There is an intention to use Cubase and Sibelius with these machines. Having experienced latency issues in the past, I believe I need a card which supports ASIO? Is there a comparison table which shows which cards support ASIO? Does the Audigy SE? There's no mention of it on the spec page, but wanted to check. Thanks

SE don't support ASIO.
In generally, all Audigy 2/4 models (excluding Audigy 2 NX) and X-Fi models (excluding XtremeAudio) supports ASIO. Also there normally is mentioned if card supports ASIO in product pages.
Li've! series cards don't support ASIO nati'vely but there are 3rd party drivers which can be used w/ Audigy 2 NX @ Li've! 24-bit External;
- http://www.asio4all.com
- http://www.usb-audio.com
jutapaMessage Edited by jutapa on 02-09-200705:07 PM

Which providers support SPA9000?

Similar Messages

Maybe you are looking for