Which RAM can K8N Neo2 Platinum stands + keyboard power on ?

Hi,
I got a K8N Neo Platinum (ref MS 7030) to build up a new system. At first I set up my PC with NO NAME RAM (PC2100 - 512 Mo - Cas unknow). Everything was fine.
I tried yesterday to replace my RAM with a new one : Kingston brand PC3200 512 Mo DDR Cas 3. In the bios, I set all the relevant parameters to "auto" (ie : the items in the menu "DRAM configuration"). I manage to boot up my XP but after a couple of seconds : windows return a blue screen and reboot automatically. If I switch back to my old PC2100 RAM everything works fine. I tried up the new RAM on another computer and it works fine (I tested it with Memtest)
So, my question is : is there a way to get this RAM work with my mobo ? what shall I check ?
Another prob is how do you active the keyboard power on, it is set up in the bios but doesn't work.
thank you for your help,
Stéphane

Stéphane,
Remove the Power Cord from the Power Supply and the Battery from the Mobo. Leave them both out for a good 15 to 20 minutes before putting them back in again.
Take Care,
Richard

Similar Messages

News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

Hi to everyone.
I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
I used the computer in the night before and when I finished I turned it off and I went to bed.
Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
I even took off the battery for more than 12 hours and I left only minimal components installed:
the video card (Gainward GeForce 6800),
the psu (Antec TruePower 550W),
1 x 512 MB Ram Crucial Ballistix,
and I checked them into another computer and they work perfectly.
I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
PLEASE HELP ME... I really don't know what else to do!!!
Thanks,
Alberto

Quote from: alberto_melita on 20-August-05, 20:14:56
Hi thanks for the answers.
I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
When I plug the system power the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens!
I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
Right now these are the full specs of my sytem:
- MB MSI K8N Neo2 Platinum nForce3 Ultra
- GAINWARD 6800 2600 GLH 256 MB Ram
- PSU Antec TruPower 550 W
- CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
- HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
- 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for MSI K8N Neo2 Platinum
I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
Again...
Thanks for you efforts, any help will be appreciated.
Alberto.
All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD, just not the MOBO ?
Checked if the MOBO is shorting in the case ?
Have you tried using the reset switch as power, on/off switch ? I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
Good Luck

K8N Neo2 Platinum has no Power On By Keyboard ?

Like topic .. i have an asus a7n8x-deluxe and Abit NF-7 and both has this function .. but i cant find it on the K8N Neo2 Plat.
Am I blind or MSI just forgot to add this functionality ? The only option I see in bios is wake up events by keyboard if STR is selected.
Bad bad MSI !!

Quote from: Supershanks on 09-June-05, 04:15:31
From Mnaual :-
Don't understand the problem am i missing something???
If you noticed it says "S3 wake up". "S3" is waking up from STR = Suspend To Ram and thats considered as warm booting.. what I mean is booting the board cold from keyboard, hence "Power On by keyboard" If you have a compliant Keyboard 98 there is a button aptly named Power. There are 3 buttons on that kind of keyboards .. Sleep, Wake Up and Power.
Thanks in advanced

USB Keyboard (K8N Neo2 platinum)

motherboard k8n neo2 platinum, somehow my motherboard does not recog my usb keyboard. i have gone to bios and enabled USB mouse/keyboard , my mouse is ok no matter which usb front or back but the keyboard usb does not work on any of usb . does anyone have any idea (hardly used keyboard, nearly new) all usb are ok??. your help will be much appreciated.
1-Motherboard MSI 7025 K8N Neo2 Platinum Chipset nForce3-250Gb/Ultra
2-CPU AMD Athlon Dual Core 3800X2
3- Graphic card (MSI FX5700) nVIDIA GeForce FX 5700
4-Memory 2 X1 GB DDR 400 DIMM kingston
5-HDD Maxtor 6Y160M0 (160 GB, 7200 RPM, SATA
6- OS Window XP Prof sp2
7-power supply Be Quite BQT- P5-420W

Bosskiller thanks for the reply it is a micorisoft multimedia, yes i have tried the back usb no luck there either. here is the link for the keyboard
http://www.farassoo.com/product/keyboard/fcr-8800.htm
but i wonder if you can tell me why some system their front usb doesn't work with usb keyboard a few have said this to me. many thanks

MSI K8N Neo2 Platinum RAM problem

My spec:
AMD64 3000+ Venice
1gb RAM Elixir
1 x Maxtor 120gb IDE
1 x Maxtor 200gb SATA
1 x Maxtor 200gb IDE
ATI Radeon x800 pro 256mb
I have a K8N Neo2 Platinum motherboard, the problem is that when I try to add in another 512mb stick the system won't even boot up. I have tried other brands and amounts but still to no avail.
I boot the system up and the monitor won't even switch on, but if I take out the 512 stick it works fine.
Any ideas?

Not quite.
Use the color codes .
If you have matched sticks in density (size) and timings (spd data) you can run dual channel.
This means having one stick in memory channel 1 ( green ) and another in memory channel2 (purple )
Theese are physically wired next to eachother on the motherboard , from cpu and upwards..
You can not do that , with that mismatched modules the cpu can't initialize it's memory controller .
So your only choice is to run two modules with single memory channel config .
Use the colorcodes to make sure you use signgle memory channel config (since you have mismatched sticks and the A64 memory controller cant run those in dual mode)
So your choice is to use either both green slots or both of the purple ones .
Place the one module with the higest cas rating (slowest) in the green slot with the lowest slot number (marked on the board) .
And the other stick on the green slot that remains .

Best ram for MSI K8N Neo2 Platinum Edition?

Ho guys
Im getting a MSI K8N Neo2 Platinum Edition this week but cant decide what memory to use what is the best memory for this board here
are my options.
http://www.stegcomputer.ch/details.asp?prodid=kin-KHX32-1c2
http://www.brack.ch/aspx/default.aspx?ID=17879&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17636&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17885&mod=artikel
http://www.1000ordi.ch/2500
I will be overclocking.
Any help would be appreciated

Quote from: mehdi on 13-July-05, 22:09:22
XL's is verified by anand to top at 2-3-3 on DDR466 so this would be how much of a oce on a 3700sandy at those timings.
Well the 3700 San Diego har a max multilplier equals 11 and you can use the lower ones also .
So you have more options than one to reach say you set a goal for 2700mhz assuming you have air cooling (2.7ghz seems to be what most aim for without extreme cooling)
HTT reference clock at 233 with memory index 200 times multiplier 11 gives 2530mhz on the cpu and 233mhz/466DDR on the memory .
To maintain same memory speed (around or below 233mhz) with higher cpu frequency you must use a divider by setting max memory speed to 166 etc and use a higher HTT clock reference .
E.g
HTT=270
Multiplier=10
Memory index=166
Gives CPU/12 divider
CPU is then 2.7ghz
Memory speed = cpuspeed/12 = 2700/12 = 225mhz or DDR450 .
Multilplier memory index dividers:
7x with 133 : cpu/11
8x with 133 : cpu/12
9X with 133 : cpu/14
10x with 133 : cpu/15
11x with 133 : cpu/17
7x with 166 : cpu/9
8x with 166 : cpu/10
9X with 166 : cpu/11
10x with 166 : cpu/12
11x with 166 : cpu/13
7x with 183 : cpu/8
8x with 183 : cpu/9
9X with 183 : cpu/10
10x with 183 : cpu/11
11x with 183 : cpu/13
7x with 200 : cpu/7
8x with 200 : cpu/8
9X with 200 : cpu/9
10x with 200 : cpu/10
11x with 200 : cpu/11
( with 200 you will se the divider is the same as multiplier , thats why some calls this 1:1 )
There are also some tables for the dividers made by orcar wu over at extremesystems in this thread:
http://www.xtremesystems.org/forums/showthread.php?t=41595&highlight=a64+divider+table]
Using this calculation you can figure out your ram frequency before trying it in the bios .
E.g use 183 mem index/divider with cpu multiplier 10x with 2.7ghz as the target .
10 x 270 = 2700
memory will run at
2700/11 = ~ 245mhz or DDR490

Which power supply for k8n neo2 Platinum

I need to buy a new power supply for my computer. With the ATX12V v2.2 standard and ATX12V 2.01 and the "no -5v on new psu's" issue I'm at a loss as to what to look for. I have looked and cannot find what "standard" (is that even the correct term?) the k8n neo2 supports.
My main requirement is that the psu be 550-650 watts and have modular cables. I know someday I will have to upgrade my system to PCI-E and modern components, so I would like a PSU that would work now and in the future.
Could someone point me in the right direction?
Many thanks
system spec's
Motherboard- MSI K8N Neo2 Platinum
CPU- AMD Athlon 64 X2 Dual core 4800 939 socket
Memory-CORSAIR 2X1G Twinx2048
Video- ATI HIS 4670 1GB AGP
HD- Seagate 100 gb 7200 rpm
Drives CD-DVD and CD-RW
PSU- Ultra X Connect 500W ATX
Sound- Creative SB Audigy2 Gamer
OS- WinXP Home SP3 32 bit

Why do you need 550-650W or is that just because of future needs? I would suggest one of the Corsair +12V single rail modular PSU's if you insist on the modular design. Check newegg for what they have for modular in the Corsair lineup. I'm sure you're aware that their price is considerably higher than the non-modular. K8 MB's that needed -5V are the early ones that had Creative Sound Blaster onboard audio.
HX650
   * Was: $139.99
   * $109.99
   * After $10.00 Rebate
   * $10.18 Shipping
That's what it is now but if you don't need it in a big hurry you can probably wait a while and get for the same price but with free shipping.
Edit: Gee, Ultra with blown caps, I just happen to have a xPRO 800W that blew some caps, repaired it and started going bad again and then got my TX650 to replace it. Got it for $70 after rebate (which I haven't received yet) by waiting for the right price, rebate and free shipping. VX550 would have been good enough but at the time I got the TX650 at a lower price.

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

Is this RAM ok for a K8N NEO2 Platinum

I am currently building a system and have got my FX-53 and K8N NEO2 Platinum but i have hit a problem in that i dont know what memory to get for it i have been looking at this http://www.komplett.co.uk/k/ki.asp?sku=116120&cks=PRL
or if this is no good could some one recommned me one perhaps from this list
http://www.komplett.co.uk/k/kl.asp?bn=10529

If you know very little about memory, then what it IS telling you, you won't understand. Here's a tip....on the offset, don't spend a lot of money on memory just yet. Purchase some PC3200, like Kingston KVR RAM or Kingmax...something relatively inexpensive...until you begin to understand timings and voltage adjustments. You will not have any problems with this type of memory, and usually...initial boot-up goes very smoothly.
Then, after you start to play with timings and such...when you begin to feel comfortable with making these adjustments, and you know your system is stable....then you could experiment with higher-performance RAM.
That's just how I do it..as I am conservative when first assembling a computer!
Tim186...."Welcome" to the MSI Forum. Also, check out RexB's 939 build thread...you will find good information in that!!!!

Which SATA port on the K8N Neo2 Platinum?

Hi! I recently got a 160GB Maxtor DiamondMax 9 Plus hard drive, but I have read somewhere (i forgot where I read it) that two S-ATA ports on the K8N Neo2 Platinum will corrupt your hard drive data if you overclock. I dont know if this is still true (I have BIOS ver 1.8) but please could someone tell me which port I should connect my S-ATA drive to? (the only drive I have at the moment is a 160GB IDE drive). I dont want RAID. Thanks!

Quote from: Supershanks on 14-June-05, 18:46:14
If u go over 230 sata 1/2 are liable to corruption.
230GB i assume?

K8N Neo2 Platinum supports which Athlon CPUs?

Pardon my ignorance, but I find this confusing:
Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU
Does the K8N Neo2 Platinum support Athlon 64 3500+ and 3800+, and NOT the 3700+? Does it support CPUs in the 4000 range? It would be easier to understand if msi just listed each CPU that this board supports.
This board is well-recommended, but I was actually considering the Athlon 3700+ for price/performance reasons. It's only $20 more than the 3500+, it's supposed to be easy to overclock, and it's way, way cheaper than the 3800+. But if the board doesn't support the 3700, I'll get the 3500.
Motherboard specs here:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=607
Thanks.

Quote from: Bob Jones on 29-April-06, 14:59:51
Pardon my ignorance, but I find this confusing:
Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU
that's because that info is released when the mobo is released. future upgrades are done through BIOS, and you will find additional information about added CPU support in the BIOS descriptions on the site.

K8N Neo2 Platinum Ordered - Advice for a noob please

Hi there,
this seems like a great forum, was hoping someone could give me some advice - Im trying to pre-empt any major probs....
I am a relative noob to building P.C's - done a few P4 based systems before but this will be my first Athlon based. This systems primary use will be gaming. I have the following on order (should be with me next week) : -
a) MSI K8N NEO2 Platinum Edition SCK 939 Motherboad
b) AMD ATHLON 64 3500+ 64bit SCK 939 Retail Inc Fan
c) 160GB Maxtor Calypso 8mb Cache 7200 SATA DHH
Components I have already
a) Graphics Card - Nvidia 6800 GT
b) Memory - Generic 2 X 512MB PC2700 DDR333 RAM
c) Sound Card - Creative SB Live Value
d) PSU - Jeantech 450W (22a on 12V Rail)
e) Case - pretty generic full tower case - no fans attached
f) CPU FAN - COOLERMASTER HYPER 48 SUPER SILENT HEATPIPE
g) Spare Hard drive - 120GB Maxtor IDE Hard drive
h) DVD Drives - 1 x Pioneeer 108 / 1 x Pioneer 104
I) Monitors - Ilyama 17" TFT & Toshiba 32WL36P LCD
I have some 'noobish' questions - apologies for my ignorance : -
1) Memory - Will my memory be okay ? Should I ditch it and buy some Corsair DDR400 (which everyone else seems to have!). Will performance suffer if I stick with the DDR 333 ? Do I need to adjust settings in BIOS regarding memory timing ? (I only picked up on this from reading through other posts on this board, and am totally clueless on 'timing'- Ive never needed to adjust timing on any previous PC's....!)
2) Sound Card - will I be better off sticking with the onboard sound on the MSI K8N neo 2 ? Or for best performance do I go with the SB LIve ? (god its a nightmare trying to get updated drivers for this card), Would I get a noticable performance increase buying an Audigy 2?
3) Vcore / other power issues - Reading this forum Im kinda scared by many posts along the lines of "..for stability I need to change my memory voltage to xx-V" or "...for a stable system I needed to change my Vcore to xx-V". Will I need to change the Bios default values on this system just to get it to run stably??
4) CPU FAN - Are AMD stock fans any good ? My Hyper 48 is quite highly rated....
5) Im completely new to SATA drives, but Ive printed off the very useful install guide on this site (which I intend to use). Is there anything I need to look out for concerning adding my IDE drive also.
I think thats about it just now - if anyone can see any other potential problems with my specs then please let me know. Im really not trying to be negative / pessimistic - after all the reason I have went for this motherboard is that it is rated as one of the best. Im just a bit paranoid that the dreaded B.S.O.D awaits me!
On a more positive note - does anyone have similar system specs they use for gaming ? How well does HL2 / Doom3 / Farcry etc fly J ? I cant wait !
Thanks for the time

you may find these helpful
Overclockers Uk Power Supplies
This Week Only Enermax Noisetaker 485W EG495AX-VE(G) SFMA ATX2.0 PSU (CA-007-EN) Might be tempting
Scan International Power Supply

K8N Neo2 platinum & 750g sata RAID issue

Hi there I have an issue with booting up. I have 1 200g Western digital HDD where windows is installed and I have 1 further 500g WD drive which were both fine until I decided to buy 2 samsung 750g HDD's to run in RAID. I have installed the drives in RAID and formatted but I am having a problem with booting.
If I reset, the computer keeps rebooting at the detection stage, powers off and keeps doing it over and over. Sometimes it will go through if you wait long enough. When I turn the power on and off it will go through the detection stage no worries every time but then at the XP loading screen it will freeze there. Sometimes it goes through and I will boot into XP fine and other times I can't get in.
I have the latest Bios 7025V1D but I am wondering if this issue is bios related because of the 750g size... The problem has only started since I have installed the two 750g HDD's in RAID. Does this bios version support 750g HDD's? Is there an updated BIOS to fix this problem somewhere?
I have 2gig of ram, 3500+ processor, latest Nforce3 drivers from Nvidia, RAID drives on sata ports/3/4, 500gig WD on sata port 1, 200 gig WD is HDD is IDE, Windows SP2 and all updated, ummmmmm everything else is fine I'm fairly sure.
I had a few troubles installing the RAID drivers because windows didn't want to accept the drivers I downloaded from here and did not want to accept the drivers in windows. I ended up getting it the drives to come on-line through the use of START/NVIDIA corp/ NVIDIA RAID program (cant remember the name, typing this on another computer).
Any ideas would be greatly and very muchly appreciated!
Terry.

Ok My PSU is: WideTECH 550w, +3.3v=33a, +5v=36a, +12v=25a, -12v=1.0a, +5vsb=2.5a.
I am only running 3 HDD's at the moment, the 2 750's and the 1 200gig. I have left the other 500gig unplugged until I get this problem sorted. I don't have a cd rom plugged in or a floppy. I only connect them when I need to because this computer is setup to be a storage server and I use my other pc for anything dvd related etc. The only other thing which is chewing power is the video card which is an old 6800gt ultra. So basically the power issue was fine until I installed the two extra HDD's and as I have unplugged the 500gig for the time being its only really one extra HDD which shouldn't be an issue. Oh I have two 80mm case fans using the psu aswell.
As for my other specs: I have 1 gig of Geil dual channel RAM 2x512 sticks, CPU=AMD Athlon64 3500+, MB is MSI K8n Neo2 Platinum, Vid card= Leadtek geforce 6800gt ultra 256 agp, You know about my HDD's but here they are again= 1x 200g WD caviar IDE, 1x 500g WD caviar sata(1 I think), 2 x 750g samsung sata (2 I think), OS = XP Home SP2 with all lasest automatic updates, latest BIOS etc etc etc....
My windows is a legit copy as well.
You mentioned putting my HDD's into sata 1 mode... I was of the opinion that my motherboard does not support sata2 anyway and would not allow them to run in anything but sata1?? If I did want to change the sata mode where would I do this anyway?
Thanks for your reply but I don't think it has to do with psu or sata mode although I'm interested about this sata2 thing, please explain.
Thanks in advance,
Terry.

K8N Neo2 Platinum Checksum Error

Hi, I apologize if I break any rules here, but I tried to use the search option to locate an answer but couldn't find anything that helped me fully.
My problem is that when I try to turn on my computer, I get a message saying:
"Award Bootblock BIOS v1.0
Copyright 2000 Award Software Inc.
BIOS ROM checksum error
Keyboard error or no keyboard present.
Detecting floppy drive A media
INSERT SYSTEM DISK AND PRESS ENTER".
Except this, my computer is completely "dead", I cannot go anywhere. From what I have understood, my BIOS is corrupted, and I need to flash it. This should be done by inserting a boot floppy with added AWDFLASH.exe and a bios.bin. The thing is, I don't know how to find these files, or at least the correct ones. I have also tried to google for a solution, but haven't found anything satisfactionary. So this is kind of my last resort. I am very sorry if this is a newbie question, but I have almost no experience in this advanced (from my perspective) knowledge.
If someone could help me locate the correct verisons of the Award Flash utility and BIOS file, and write a short step by step-walkthrough of how to proceed, you would have my eternal gratitude.
My system is a 4 years old:
MSI K8N Neo2 Platinum 54G S939 with nForce 3 Ultra
Windows XP Home
AMD Athlon 64 3500+ 2.2 Ghz
Gainward GeForce 7800 GS 512 Mb
2x TwinMos 512 Mb RAM PC3200
Maxtor Diamondmax 200 Gb SATA
MS-7025 Ver: 1 is printed on the motherboard.

Quote from: go_for on 11-March-09, 03:04:25
This one is stuck in Award bootblock mode, will most likely need a re-flash from a bootable floppy disk.
Make a bootable floppy disk, in e.g WinXP.
Make a file with notepad, containing this line:
AWFL833D.EXE W7025NMS.1D0 /CC /CD /CP /QI /R /PY /SN
Save this file on this floppy by the name Autoexec.bat
Also add the two files AWFL833D.EXE and W7025NMS.1D0 on this floppy.
Power up the K8N Neo2 Plat. with this disk in the floppy drive. The flashing will begin, let it finish.
Remove floppy and reboot. If it succeeded, set all relevant values in BIOS and save&exit.
Quote
This one is stuck in Award bootblock mode, will most likely need a re-flash from a bootable floppy disk.
Not always, the same fake error message can came from bad memory stick too.
Also he didn't flash his BIOS before the message to appear.

Os/2 or beos on k8n neo2 platinum

i want to run beos on my system
or os/2
i have the k8n neo2 platinum
athlon 64 3500
1 gig geil ram
80 GB maxtor Pata hard drive
30 gb seagate Pata hard drive
60 gb SATA maxtor
ati card (wel figure that one out later)
BeOS 5 pro just reboots
and for some ungodly reason i cannot write my os/2 image files without some crap about "BAD TRACK 0" and i just bought a new pack of floppies. and it tells me this with EVERY disk
the only OTHER OS i can get to run is linux
which im quite fond of... "anything except WINDOZE"
I guess what my question is .....WHAT KIND OF VOODOO RITUAL DO I HAFTA PERFORM TO MAKE THIS WORK!!!!!!!
I dont have any chickens to bleed, but the neighbor does!!!!
Please help
ANY help would be GREATLY APPRICIATED!!!!!!!!!!!!!!!!!

Hi,
I tried to do the same with os/2 and MSI Neo4 Platinum/SLI and Athlon FX55.
OS/2 Warp 4 requires 256MB ram or less installed to do initial install. The first partition of HDD must be less than 2.06Gigs in order for the Kernel to compile.
EComStation has the newest version of OS/2. A Google search should take you right to Sundial's site.

Which RAM can K8N Neo2 Platinum stands + keyboard power on ?

Similar Messages

Maybe you are looking for