Which range expander will work with the Cisco Valetplus (Model M20)

I have  the Valetplus set up and it works great.  I need to extend the range about 50 feet. Will a WRE54G work with this?

I doubt that WRE54G will not work your Router. As you already has a N series wireless router, with this router you should be able to get a wireless range about 50Fts, just you need to change some wireless settings on your Router..
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...

Similar Messages

  • I have a MDD dual 1.25ghz processors and I would like to know which sata drives will work with the Sonnet Seria ATA pci card?

    Which sata drives will work with the Sonnet Tempo Serial ATA card?

    Pretty much any of the SATA 3.0 Gbps drives.
    Western Digital Black and Blue and Hitachi 7K drives are all good choices.
    If you try a SATA 6.0 Gbps drive, it will need to be jumped to limit to SATA 3.0 Gbps.

  • HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

    I have the iPhone 4S and would like to purchase a docking device.  I have the Otter Box Camo case and would like to know which dock will work with the
    case ON.   Thank you.

    it might be better to contact otterbox to find out from them what they made it compatible with. 

  • I want to buy an ipad for someone that lives in Brazil. Which carrier should i buy so that it will work with the carriers in Brazil?

    I want to buy an ipad for someone that lives in Brazil. Which carrier should i buy so that it will work with the carriers in Brazil?

    Look, any officially unlocked GSM iPhone will work in India. You purchase from Dubai, no FaceTime, and Dubai is part of the UAE. You purchase anywhere but India, and you will have NO warranty or support. Frankly, doesn't make any sense to me why you want to do this...and don't bother telling me you save hundreds of dollars...still doesn't make any sense. Do a forum search here. We get posts daily, from users in India, who didn't purchase their iPhones in India...guess what? They all have problems. You want to join that bunch? It's your money, have at it.

  • Which USB external MODEM will work with the latest MAC MINI?

    Can anyone recommend an external USB modem (other than Apple's) that will work with the latest MAC MINI?
    Thanks!
    Captain

    Hello!
    I am very happy with the APPLE USB MODEM "MA034"
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=ap ple%20usb%20modem#overview
    You cannot find smaller and it never crashed or anything whatsoever.
    Oh yes, and it is white!

  • Which Speedlite Flash will work with my Canon Rebel EOS T3 1100 D?

    Hi, I am new to the digital age and over 55 years old.  My husband bought me a Canon Rebel EOS T3 1100 D in July.   (I fought the "technological" upgrade until my old Canon film camera quit on me.)  I've been taking pictures since 1966, so I'm not new to photographing, just to our technological advances.
    I would so very much appreciate if anyone could help me with which Speedlite flashes will work with my specific Canon T3 Rebel 1100 D camera.  
    Thank you so much for your time. 
    Solved!
    Go to Solution.

    I've just received my 430EX II that I purchased for use with my Rebel T2i. The main reason I purchased the Canon product was....in 60 years of using Canon products I've never had a failure or a bad experience. I've been using the 430EX ll for a few days and I'm quite happy with the results. Far, far better than the built in flash. It's on sale now with free Fed X shipping. That's hard to beat.
    Best of luck with your new camera.
    Joe

  • Which USB Webcams will work with iChat?

    Hi,
    I'm new to these forums and am wanting to get a webcam, but iSights are no longer available and I don't have the interest or money to get a DV Camcorder.
    So which USB webcams will work with iChat?
    I take it I'll also have to purchase iChatUSBcam or whatever it's called.
    Thanks
    Iain

    Hi Iain:
    There is a list of cams on their website:
    http://ecamm.com/mac/ichatusbcam/configs.html
    The only USB cam that doesn't require iChatUSBCam is the iMage.
    -Ken

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • Am considering buying a Time Capsule.  But all specs I read about it (re: printing) is how to hook up a printer via USB connection.  Need to confirm...that a wireless printer will work with the router feature of the Time Capsule.  I assume yes...?

    Am considering buying a Time Capsule.  But all specs I read about it (re: printing) is how to hook up a printer via USB connection.  Need to confirm...that a wireless printer will work with the router feature of the Time Capsule.  I assume yes...?

    A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
    The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
    Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

  • What HDMI to Component converter will work with the current generation Apple TV3?

    What HDMI to Component converter will work with the current generation Apple TV3?

    http://www.hdfury.com/products/hdfuryiii-specs/

  • What earlier version of FCP will work with the intel-3processor?

    what earlier version of FCP will work with the intel-3 processor?

    The version of the CR designer that the reports were created in is really not that important. Though more on that below. What you need is Crystal Reports XI R2A (11.5.x). That is the last version of CR to ship the Report Designer Component  (RDC) that you are presumably using at this time. Note that this version is out of support thus no fixes, no phone support, though we welcome your queries on these forums. To obtain CR XI R2A you will have to contact sales; 866-681-3435. Do not get CR 2008 (12.x) as this version does not ship the RDC and only has the SDK for .NET and Java.
    Re. version of the reports. While the version of the designer the reports were created in should not be that important, the older the designer, the more potential problems you may run into. Updating the reports to CR XI R2A is highly advised. You can do this manually by simply opening the reports in the designer and saving them - making sure they still run once that is done. Alternatively, you can do this in code by simply using the .SaveAs method, or exporting to rpt file format. This may not however update the database connectivity correctly (the database engine was completely rewritten in CR 9) and testing will be needed to make sure these reports still work. This is particularly true of your version 8 reports. Version 9 reports and later should be OK.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Is there an adapter can i get so square will work with the otterbox i have on my iphone

    Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

    That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
    Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
    Give that a try. Claims to work perfectly for Square. NOT headphones.

  • I get no wireless signal in my home, so need a network extender for the Lumia 2520.  Specs indicate LTE FDD network:Band 20 (800MHz), Band 3 (1800 MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia?

    I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz).  Does Verizon offer a network extender that will work with the Lumia 2520?

    We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Is there an HDR plug in that will work with the 64 bit version of PSE 13?

    Is there an HDR plug in that will work with the 64 bit version of PSE 13?  I was hoping that NIK HDR Pro2 would work since Elements 13 is now 64 bit, but unfortunately, that is not the case.

    julesoir wrote:
    The internal speakers work fine when I boot in Windows, but they don't appear as an option in the System Preferences Output selection when in OS X. Does anyone know what command I could use to tell it to use the internal speakers instead?
    Ideally it would be great if I could then just click between output options in System Preferences, but any solution at all would be greatly appreciated.
    I am not sure if this will help, but if you haven't already checked the settings in the Audio MIDI Setup utility, try 'em out. Most people don't know that utility exists, but it has additional audio routing/muting options that are not in Sound system preferences.

  • Any Skype Video that will work with the A1 ?

    Is there a version of Skype Video that will work with the A1 ?
    Moderator Note: Edited subject to match content.

    Skype works wonderfully on the HTC Thunderbolt. The Tegra single core is just fine. It's not the chip, it's this device. As I've written as well, playback of any video is poor and any HD video is unwatchable. The phone plays HD video reasonably smoothly.
    The Skype issue is the same - the app sees that it is video capable but cannot find the front facing camera (or any camera for that matter.) I'm surprised to find that video functions on this device don't work very well. Hopefully the company will be behind supporting this device. I'm surprised that it has Gingerbread only but you can't expect them to dump these out without having made sure they worked properly just for simple things that have worked properly on comparable devices.

Maybe you are looking for

  • HT1390 Apple tv and renting movie I get item is being modified.  Any fix?

    Trying to rent a movie.  Get the warning "the item is currently being modified. Please try again later" Any fix?

  • Safari and iChat won't work after lion upgrade

    I just completed an upgrade to lion on my 2010 Mac mini and after reboot, safari won't open a web page..it just gets stuck with the blue loading bar about 1 inch from the left and iChat won't connect either.  I've repaired permissions and rebooted se

  • Clearing a Chart/Grap​h programati​cally

    Hello, Is there a way to clear a graph or chart at the time the program starts. I have looked at the attribute node values but there is nothing I can see that would do this. The problem is when I restart the program the charts x axis keeps growing an

  • Remote ip address is invalid with webcam?

    maybe some of you have seen my other thread about my webcam not working, it doesnt work with any program, ichat, oovoo, stickam nothing, i get an error message in ichat that says "remote ip address is invalid" i opened up all ports needed on my route

  • ADF Data visualization Gantt chart displaying 10 columns only

    hi i am using Gantt chart and it is only displaying 10 columns from the view object the 11 column is not visible how can i solve this?? also these columns are taking so much space, and i want to make their width smaller, but when i change the style -