Which release/built of RHEL 5 is stable / recommended for Oracle 11g databa

Hi friends.
My company is in the process of setting up Oracle 11g RAC database. For this, they are planning to have it done on RHEL 5.
Kindly let me know so as to which release/update/version in RHEL 5 should i recommend them. The idea is that, We are looking for a smooth trouble free installation. Tried and tested by others.
Thanks.
Monu

We are going for the 64 Bit, and the installation has been started.
From the very beginning there has been a lot of conflicts with the drivers and patches, initally there was a NIC bonding issue, once that is resolved. now the server gets rebooted each time. Specially when two people try to login at the same time..

Similar Messages

Is there any plan to release an express edition for ORACLE 11g?

Hi
I am wondering whether ORACLE has some plan to release an express edition for its ORACLE 11g?
Thanks.

info about [11g Express|http://www.pcworld.com/businesscenter/article/173509/oracle_11g_xpress_edition_a_year_or_two_away.html]

How to setup local loopback for "Oracle 11g Release 2" installtion

Hi all,
I was trying to install the Oracle 11g Release 2 on Red hat 6 using Local Loop back configuration, but not able to install..
The contents of are:-
/etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
and of /etc/hosts are:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
and
System eth0 is having setting given below:-
IPV4 is set to " Automatic(DHCP)".
IPV6 is set to "ignore".
If i select system etho0 then host-name gets changed it becomes "dhcppc0".
i checked it using command host-name. and if i try to install with this configuration then during installation gives error of networking as host-name has been changed to "dhcppc0".
Please tell me what to do for local loopback configuration
Am i doing some thing wrong?
Thanks

i am using "oracle Release 11.2.0.1.0" but same problem was there with oracle 10g on redhat 5.
Please tell me how to setup local loopback configuration so that i can use internet as well as oracle on same machine. otherwise for internet use i have to change my system ipV4 to automatic(DHCP). if i change it to automatic(DHCP) then oracle stop its working please tell me solution for both case.
I can not assign Static IP to IPv4, i earlier post i got recommendation to connfigure Local Loopback , but i am able to setup it.
what ever the setting i have done are given below:--
vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
vi .etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
#ping localhost
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.048 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.037 ms
++++++++++++++++++++++++++++++++++++++++++++++++
error is------
[INS-06101]Ip address of localhost could not be determined
are you sure you want to continue?
Cause - The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
Action - Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
Summary - dhcppc0: dhcppc0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
log file lines are:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using paramFile: /database/install/oraparam.ini
Checking Temp space: must be greater than 80 MB. Actual 7471 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3499 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/database/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-05-29_05-13-01PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/database/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=2.6.32-220.el6.i686
-mx150m
-cp
/tmp/OraInstall2012-05-29_05-13-01PM::/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instcommon.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instdb.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/cvu.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oneclick.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/share.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emCfg.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/http_client.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstImages.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/swingaccess.jar::/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xml.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvm.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvmasm.jar
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/tmp/OraInstall2012-05-29_05-13-01PM
-sourceLoc
/database/install/../stage/products.xml
-sourceType
network
-timestamp
2012-05-29_05-13-01PM
INFO: Loading data from: jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: Unable to determine a valid IP for the localhost..
Refer associated stacktrace #oracle.install.driver.oui.OUISetupDriver:13
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-06101] IP address of localhost could not be determined
CAUSE: The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
ACTION: Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
SUMMARY:
- dhcppc0: dhcppc0.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:16
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
---------------------------------------------------------------------------------------------

Install RHEL 2.1 in VMware for Oracle 9i

i used vmware 5.5 to install RHEL 2.1.. after installation is complete, i reboot the system, but i cannot go to the desktop.. i stucked at the terminal that said:
Red Hat Linux Advanced Server release 2.1AS/i686 (Pensacola)
eric login: _
i can login to root and used the terminal, but cannot go to the desktop... a insert "startx" command, but return an error.
i skip the X configuration while installing RHEL --> doesn't work..
i configure the X configuration with my laptop video card spec --> doesn't work...
what should i do?? what is the video card of the vmware??

/var/log/XFree86.0.log
XFree86 Version 4.1.0 Red Hat Linux release:
4.1.0-25) / X Window System
(protocol Version 11, revision 0, vendor
release 6510)
Release Date: 2 june 2001
If the server is older than 6-12
months, or if your card is newer than the
above date, look for newer version before
reporting problems. (see
http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17-0.13smp
i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log",
Time: Jul 28 09:18:06 2009
(==) Using config file:
"/etc/X11/XF86Config"
Parse error on line 242 of section
InputDevice in file /etc/X11/XF86Config
"Device" is not a valid keyword in thin
section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatar server error:
no screens found

Min. rhel packages for oracle 11g r2 database installation

hi guys,
i'm doing a fresh standalone installation of rhel and 11g database. during rhel installation, i can select which category and individual packages to install. i want to select MINIMUM packages for resource saving and security. what packages should i pick up? is there a guide doc?
thanks!
thomas

869060 wrote:
MINIMUM.
no additional packages for rhel installation except those are required by oracle database or for common linux admin tasks.The oracle installation guide does list the minimum requirements to support the oracle product being installed.
As for minimum requirements for the OS itself, that is beyond the scope/concern of Oracle documents. Doesn't the installation process prompt you for which components you want to install? If you don't know what you are doing, I'd be very leery of trying to create a 'minimal' installation of the OS.

Which tool is used for Oracle 11g performance tuning?

Hi all
I used statspack for 9i's performance tuning.
But with 11g R2 now I want to know which way are you using to do performance tuning?
Statspack? OSW? RDA? ADDM? Or other ways?
Thank you.

schavali wrote:
I would start with Automatic Workload Repository (AWR) reports to identify the bottleneck
MOS Doc 390374.1 - Oracle Performance Diagnostic Guide (OPDG)
MOS Doc 748642.1 - What is AWR( Automatic workload repository ) and How to generate the AWR report?
HTH
SriniThanks for your answer.
To read the MOS documents I need a Oracle Customer ID , is that right ?
(Where to get that ID ? Our company bought Oracle 10g without any Customer IDs in it )
Best Wishes.

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

Installing Oracle 11g R2 on RHEL 5.9 server

Hi,
    I've been trying to install Oracle 11g R2 on a Red Hat Enterprise Linux 5.9 server but have not succeeded thus far. The server meets all the software and hardware requirements for Oracle 11g Release 2 and when it also has all the prerequisite packages/ RPM's on it, when checked manually. I have set up the various kernel, semaphore and local port range parameters in accordance with the Oracle guides for installing Oracle on RHEL 5. I also followed the online guides to create the "oracle" user and set up the groups (oinstall, dba, oper and asm).
    However, when I run the installer, it shows "Failed" for all the prerequisite checks. I tried to ignore this and install Oracle but it failed at 37% and gave multiple errors, related to invoking target 'XYZ' of different files including makefile and gcc.
     I suspect that either the installer is unable to detect these packages as they already exist on our server or it is something to do around permissions to the groups. I read on these forums that it might be because of a "cvu" folder created inside /tmp that requires '777' permission but am not sure if that's what's causing our installation to fail.
     Please let me know how to proceed with the installation and guide me through this.
Thanks.

Hi, its Oracle 11g R2 - 2.0.3.6 .
The O.S is Linux x86_64
server: RHEL 5.9 (Takinga) with kernel: 2.6.18
I've been working on this all day today and have managed to overcome the errors regarding the missing/ failed packages. I've also verified that my kernel parameters are correct; I had missed the kernel shmmni parameter yesterday.
The installer now detects all the packages & runs till 86% when it gives the error: "error invoking target client_sharedlib of makefile".
Kindly let me know how to proceed. Thanks in advance !

Upgrade steps needed - Oracle 10g to Oracle 11g in RHEL 4

Hello,
Am in the process of upgrading oracle 10g with 10.1.4.3 IDM,10.1.0.5 DB and 10.1.4.2 portal version to Oracle 11g. Now I see that there are some compatibilities in the OS. I have RHEL 4 and when I check the compatibility guide I see that it is possible to install/upgrade the oracle to 11g. But am worried on the kernel and packages which is needed for Oracle 11g. If there is any step by step assistance on this please guide me. Also I have an another query can I upgrade the OS RHEL 4 to RHEL 5 and then Oracle 10g to Oracle 11g. Will I be seeing any issue after the OS upgrade with product upgrade. Kindly advise me.
R/Ganesh

This is all about libraries, some libraries between RHEL 4 and 5 had change and this may lead to malfunction of some products, cause they have been copiled using old libraries that doesn't exist now, even I think in the upgradres there are compatibility modes where let you keep old libraries, anyway seems a difficult thing to do. If you plan to move RHEL 4 to 5, I think this is your first step and then install again the Portal in the old version, and then make the upgrade, If you make this step by step, as firts install RHEL 5, install db, install portal, upgrade DB and finaly upgrade portal, would be easier. You may want to read the Master note for this upgrades in oracle Support 873751.1
Greetings.

I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

How do I report on which release code released a Requisition?

I need to create a report that shows all the requisitions created last month and which release code approved them. I know I can join EBAN and T16FS to see the codes that CAN approve, but I need to know which one DID approve. We only require one of the codes on a release strategy to do the approving. When you look at a purchase requisition in ME52N that has been approved, on the Release Strategy tab it shows a checkmark next to the Code that approved it. Where is that kept? That's what I need to report.
From some other postings I read that it may be in CDHDR or CDPOS, but, if so, how do I get from EBAN to CDPOS to see the Approver Code?

Thanks for the info. However, I’m not seeing that behavior. In SQVI using EBAN table every “X” is in position 1 for FRGZU.
However, for example, purchase req 10018345 was approved by the SECOND approver code.
Using the M2 Strategy:
But the last Req above, 20004578, was approved by the 3rd approver in the sorted list:
Which is the first name in the Strategy W1:
You can see above where the X is in the same place for both of these Reqs when viewed in SQVI (EBAN). Is there another way to view this and create a report that reflects the functionality you're talking about? Or maybe I'm just missing something.

AIR - no images after export release built

Hi,
when I am running my AIR project in Flex Bulider I have images in my application. After export release built there is no images in my application. How can I fix this?

Yeah I had the same problem. Here is a hack:
If not, then you can kind of cheat. When you publish your .air file, it
will offer you the choice of files to include in the archive.
If you click "back" at this point then you have the opportunity (outside
of flexbuilder) to copy any files you need to the "bin-release" folder
that gets temporarily created as part of the publishing operation. Back
in flexbuilder, click "next" again and you'll be back in the stage where
you can specify files to include, but now you'll have the opportunity to
select the files you just copied to bin-release.
This, however, gets old pretty quickly!
ref- http://old.nabble.com/How-do-I-include-a-file-in-the-AIR-app-storage-directory-at-install- time--td21007763.html
Although, I recommend to bundle all assets up with Apache Ant, but that requires some time to configure a file to do that if you are not familiar with Ant.
And here is another link I have bookmarked:
http://forums.adobe.com/message/2294086

Which widows server 2008 release and edition supports Oracle 11g R1 64 Bit

Hi
Trying to install the Oracle 11g R1 64bit on Windows server 2008 . Hence requesting you all , which Windows server 2008 Release and Edition support Oracle database 11g R1 64bit .
Thank You
Edited by: user8709943 on Nov 12, 2010 10:34 AM

Hi,
even 2008 also certified, totally widnows 2008/2003 R2/xp/vista , linux, ibm aix, hp Ux ...
go to http://support.oracle.com --> certifications ---> select product "ORACLE DATABASE" ---> Release "11.x.x.x' --> select platform "ANY"
you can check all the compatibility..
*https://support.oracle.com/CSP/ui/flash.html#tab=CertifyHomePageV2(page=CertifyHomePageV2&id=ggfixmkw())*
Thanks

Which release?? branded solaris 9 and solaris 8.

Hi people:
First question using solaris 10u10 and making branded zones;
which releases of solaris 9 and solaris8 are reported. I mean the printout of cat /etc/release of that branded zones will be...
Second one.. can I use P2V to put a solaris 10u6 box into a Solaris 10u10 or solaris 11 on a T3-1B box.. I ask because the lowest solaris 10 supported is u9 on the T3-1B.
Third one.. If question 2 isn't doable with Solaris10u10 could be done with Solaris11? Yes using P2V.
Thanks for any comment!

Yes, you'll need the x86 version, not the SPARC version.
I'd guess you probably need a fairly late version of Solaris 9 too in order to even boot the kernel on the AMD processors.

Which release/built of RHEL 5 is stable / recommended for Oracle 11g databa

Similar Messages

Maybe you are looking for