Which release of Administration Workshop I should I chose to pass 1z0-042?

Hello!
I want to take the 1z0-042 exam,and OTN say that I can prepare for it by myself through "Oracle Database 10g: Administration Workshop I ",but I find a lot releases of Administration Workshops as below:
Oracle Database 10g R2: Administration Workshop I D17090GC30 (Spiral-bound) Publisher: Oracle University (2004) ASIN: B000T6M9X6
Oracle University Oracle Database 10g R2: Administration Workshop I VOLUME 1 ONLY D17090GC30 (Spiral-bound) Publisher: Oracle University (2004)
ASIN: B000T6KJCY
Oracle Database 10g Administration Workshop I D17090GC30 Edition 1 (2004)
D339126 - Oracle Database 10g: Administration Workshop I (Vol. 1)
D339127 - Oracle Database 10g: Administration Workshop I (Vol. 2)
So,which one should I choose?Or if you have got a right release of it,it's very kind of you to send it to my EMail [email protected]
Thank you very much!

Oracle Database 10g R2: Administration Workshop I
- The course is D17090
- The language code is GC (General Curriculum/English)
- The revision is '30' (major release 3, minor release/patch 0)
The course is an instructor-led week long course. It has labs based on a specific setup and uses 2 spiral bound books, Volume 1 and Volume 2
The books are copyright by Oracle and electronic distribution is illegal.
as
The exam takes information from the course material found in both volumes, as well as material from successful completion of the labs. Reading from the student books may not be sufficient to pass the exam.
A better way to pass the exam is to
a) take the course, either in class or self study CD; or
b) chose one of the related exam-cram books such those listed here

Similar Messages

Oracle 10g Administration workshop I course

I am wondering if anyone has studied Oracle 10g Administration workshop I course via self study?
My company is willing to sponsor me for Oracle Database Administration courses. I have a got a option to attend the Oracle hand on training courses or go for Oracle self study courses.
I have done OCA PL/SQL (9i) Certification in the past and at the moment I am not thinking about doing any DBA level certification.
(Administration workshop I & II (instructor lead) course is one of the OCP certification requirement)
What are the pros and cons of Self Study course and how is that different to instructor lead course?
Is there any duration limit on self study course?
Should i go for 10g course or 11g? We mostly use 10g.

orion_123 wrote:
I am wondering if anyone has studied Oracle 10g Administration workshop I course via self study?
My company is willing to sponsor me for Oracle Database Administration courses. I have a got a option to attend the Oracle hand on training courses or go for Oracle self study courses.
I have done OCA PL/SQL (9i) Certification in the past and at the moment I am not thinking about doing any DBA level certification.
(Administration workshop I & II (instructor lead) course is one of the OCP certification requirement)
What are the pros and cons of Self Study course and how is that different to instructor lead course?
Is there any duration limit on self study course?
Should i go for 10g course or 11g? We mostly use 10g.
There are a few things available from Oracle, some of which are eligible as training requirement for DBA Certification:
- Traditional Oracle Classroom - Eligible for satsifisfying the training requirement
- Oracle Classroom presented online in real time (LVC) - Eligible for satsifisfying the training requirement ( Quite new ... about 2 years)
- Oracle Self Study CD ROM - This does NOT satisfy the training requirement. (SSCDs do not count towards your course requirements for certification and should be used as a study aid only.)
- Training on Demand (This is a new training format. The course must be listed in the list of approved courses http://bit.ly/wyajDv.)
Ref: {message:id=10215249}
My personal view would be to go for 11g. It generally suspersets 10g and gets you more future orientated. But that might not be the best decision for everyone. It is also useful to have 11g training which can be used against 10g or 11g DBA certification.

Oracle 10g Database Administration Workshop I

Dears !
How i may get a soft copy of the Oracle 10g Database Administration Workshop I from the net for downloading in free.
Thanks.

Ashraf,
Besides the fact that the soft copy is and only is to be used by Oracle University trainers and is a properity of Oracle and that's make the use of it outside oracle illegal if you are not a part of OU, I would say one more thing.If you are really on the level to start with oracle database administration learning which seems to be true from the request you made,you wont be able to clear ANY doubt from the book alone. You need some one to have a talk/discussion to clear them and thats why its called ILT,instructor lead training. There is no use at all of the book if you don't get the doubts clear and I can gurantee that by juse reading the book,soft/hard whatever copy,you wont get anything.So it better to come in OU and do a proper course.If you think price is the issue than you can do the same from a partener too where price would be less as well.
Aman....

Oracle Database 11g: Administration Workshop I Lab files

Hi, I was trying to do the practicals for the above workshop, but i cant seem to locate the lab files from the directory/home/oracle/labs.
This is what happened when i try to run the lab file script.
[oracle@localhost ~]$ /home/oracle/labs
[oracle@localhost ~]$ ls
Desktop labs
[oracle@localhost ~]$ cd labs
[oracle@localhost ~]$ ls
cloneDBCreation.sql lockAccount.sql postScripts.sql
CloneRmanRestore.sql orcl.sh rmanRestoreDatafiles.sql
init.ora orcl.sql ultraSearchCfg.sql
initorclTemp.ora postDBCreation.sql
I was told to run the script: $ sqlplus dba1/oracle @lab_06_02_4.sql, but apparently there's no lab files for me to run the script.
Does anyone know how to resolve this problem?
Many thanks in advance! :D

user12201455 wrote:
Hey all. I'm trying to figure out if the class "Oracle Database 11g: Administration Workshop I Release 2" counts toward OCP certification. I know that "Oracle Database 11g: Administration Workshop I" does from this page: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=244#5 However, Release 2 is not listed there. It'd be a pretty spectacular waste of $3000 to take a class that doesn't count toward OCP if that's what I'm going for. :) Help appreciated!
From the UK on the link you refer to I currently see (under 11g OCP section .... ) (There is an OCP and OCM section as well).
* Oracle Database 11g: Introduction to SQL
* Oracle Database 11g: Introduction to SQL Ed 1 LVC
* Oracle Database 11g: SQL Fundamentals I
* Oracle Database 11g: SQL Fundamentals l Ed 1 LVC
* Oracle Database 11g: SQL and PL/SQL Fundamentals
* Oracle Database 11g: SQL and PL/SQL Fundamentals Ed 1 LVC
* Oracle Database 11g: Develop PL/SQL Program Units
* Oracle Database 11g: Administration Workshop I
* Oracle Database 11g: Administration Workshop I Ed 1.1 LVC
* Oracle Database 11g: Administration Workshop II
* Oracle Database 11g: Data Warehousing Fundamentals
The course you mention appears to me to be second from bottom.
Very occasionally these webpages can unintentionally vary from country to country.
Sorry ... misunderstood, either the (release 1 or release 2 will count). I am not authorative on this but they are not that cruel. The main general issue is 10g classes typically cannot be used for an 11g OCP. Please note I am not authorative on this but I am as sure as I can be about the principle. Check with your local Oracle University if you need to be authoratively sure.
Edited by: bigdelboy on 20-Apr-2010 16:00

I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?

I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?

adobe forums, only to discover Adobe doesn't allow a primary admin to ever leave. This is rather silly as people leave workplaces, they don't stay for life. An answer in a different forum on this site said one must cancel their adobe account, then start a new one. Though... Adobe doesn't allow a person to cancel their adobe account. It all must be done via Adobe customer service, which has proved non existent. There is no email address to email a request, there is a chat option which claims 24/7 chat however this functionality doesn't seem to work on my new Lenovo computer, current IE explorer running Windows 8.
Adobe - you really need to sort this out. I have left the work place where I was the Team Administrator some months ago now and now I need to be removed from that workplace account completely. Currently, I still have full access to it, which is not good from a security point of view because if I were a disgruntled ex-employee I could play havoc with my workplaces subscription and access their confidential files stored in the cloud.
Looking through the Forum, there is a great deal of conversation on this exact point. I'd suggest you answer this one, then create a sticky so people don't keep creating new threads and then see about resolving the issue so that Primary Admins can change in future, and be removed when they leave the workplace.
Thanks
Geoff

Which release/built of RHEL 5 is stable / recommended for Oracle 11g databa

Hi friends.
My company is in the process of setting up Oracle 11g RAC database. For this, they are planning to have it done on RHEL 5.
Kindly let me know so as to which release/update/version in RHEL 5 should i recommend them. The idea is that, We are looking for a smooth trouble free installation. Tried and tested by others.
Thanks.
Monu

We are going for the 64 Bit, and the installation has been started.
From the very beginning there has been a lot of conflicts with the drivers and patches, initally there was a NIC bonding issue, once that is resolved. now the server gets rebooted each time. Specially when two people try to login at the same time..

Validation in T Code F-02 in which Bank outgoing GL A/c should be restricte

Dear All,
Please advice me regarding the following:
User is posting the payment to vendor through T Code F-02, resulting in the not creation of the liability.
Client wants to stop it by validation in T Code F-02 in which Bank outgoing GL A/c should be restricted, so that user would not be able to post the payment with this T Code.
But this Bank GL should not be restricted in BDC for upload to F-02.
What should be the Prerequisites, Checks and messages for that?
Regards
BIJUDAS

Hi Biju
Lot of companies just dont give the auth of F-02 to the employees... Because you have T codes like F-43, FB60/70, F-48, F-53 etc which serve the defined purpose, where as In F-02, the employee can do any thing and every thing....
If you write a validation, it would apply for F-02 (Manual as well as BDC)... you cant restrict it partially, as far as I know
In my opinion, you should control it by authorization and only one or key people should be allowed F-02
Br, Ajay M

How do I report on which release code released a Requisition?

I need to create a report that shows all the requisitions created last month and which release code approved them. I know I can join EBAN and T16FS to see the codes that CAN approve, but I need to know which one DID approve. We only require one of the codes on a release strategy to do the approving. When you look at a purchase requisition in ME52N that has been approved, on the Release Strategy tab it shows a checkmark next to the Code that approved it. Where is that kept? That's what I need to report.
From some other postings I read that it may be in CDHDR or CDPOS, but, if so, how do I get from EBAN to CDPOS to see the Approver Code?

Thanks for the info. However, I’m not seeing that behavior. In SQVI using EBAN table every “X” is in position 1 for FRGZU.
However, for example, purchase req 10018345 was approved by the SECOND approver code.
Using the M2 Strategy:
But the last Req above, 20004578, was approved by the 3rd approver in the sorted list:
Which is the first name in the Strategy W1:
You can see above where the X is in the same place for both of these Reqs when viewed in SQVI (EBAN). Is there another way to view this and create a report that reflects the functionality you're talking about? Or maybe I'm just missing something.

How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!

How do you fill in a form that was saved as a template? When I try, the "template" shifts, which is not how a template should work!
Templates, as I understand them, are fixed; you can "fill them in" without shifting them. Yet, I've saved doc as a template AND it shifts. Argh!

Thanks for your response.
I've managed to fix it but I wouldn't recommend the following as I'm sure its unsupported and I'll probably have problems down the line
On the host
* mv /etc/zones /etc/zones.bak
* reboot single user
* apply kernel patch (the one that ultimately I had to get on and which was giving pre-req dependency errors when running zones)
* create a new zone now that host system is all up to date
* Copy the operating system directories of the new zone (the one that's all patched) over the troublesome zone (the one that can't take the patch). Take backups first
* cd /zones/new-zone/root
* find sbin -print | cpio -pudm /zones/bad-zone/root
* find usr -print | cpio -pudm /zones/bad-zone/root
* find lib -print | cpio -pudm /zones/bad-zone/root
* cd /zones/new-zone/root/var
* find sadm -print | cpio -pudm /zones/bad-zone/root/sadm (this copies patches and pkgs directories and I'm sure a lot of other stuff that I didn't want)
* mv /etc/zones.bak /etc/zones
* reboot host
* boot the old zone up. It should now have up to date patches
I'm sure there are real no-no's in taking this approach but it seems to have worked for me. I'll update if I find there are some horrors down the line
Edited by: paul_xedos on Mar 25, 2010 4:07 AM

Error: "The user for which we are checking a privilege should be in the same org as the context provided"

Hi All,
Recently, we've encountered some weird error for some users when trying to assign records to them through both the CRM UI and CRM SDK Call.
The error message saying: "The user for which we are checking a privilege should be in the same org as the context provided".
Here is the trace log for assigning a lead for one of those users (same error for other records):
[2010-08-09 13:58:06.0] Process: w3wp |Organization:d905ae4d-8d9f-df11-a1b0-00237df0351e |Thread: 22 |Category: Exception |User: fb56b107-949f-df11-a1b0-00237df0351e |Level: Error | CrmArgumentException..ctor
at CrmArgumentException..ctor(String message)
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context)
at SecurityLibrary.CheckPrivilege(Guid user, Guid privilege, ExecutionContext context)
at SecurityLibrary.CheckPrivilege(Guid user, EntityMetadata metadata, PrivilegeType type, ExecutionContext context)
at CascadeEngine.AssignDB(BusinessEntityMoniker moniker, SecurityPrincipal assignee, ExecutionContext context)
at RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at LogicalMethodInfo.Invoke(Object target, Object[] values)
at InternalOperationPlugin.Execute(IPluginExecutionContext context)
at PluginStep.Execute(PipelineExecutionContext context)
at Pipeline.Execute(PipelineExecutionContext context)
at MessageProcessor.Execute(PipelineExecutionContext context)
at InternalMessageDispatcher.Execute(PipelineExecutionContext context)
at ExternalMessageDispatcher.Execute(String messageName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode, PropertyBag fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at RequestBase.Process(Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at RequestBase.Process(CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at CrmServiceInternal.Execute(RequestBase request, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at InProcessCrmService.Execute(Object request)
at PlatformCommand.ExecuteInternal()
at AssignRouteOnCreateUpdateListener.AssignEntity(Entity entity, LookupValue owner)
at CommunicationListener.HandlePostEvent(PlatformCommand command, Response response)
at PlatformCommand.ExecuteInternal()
at UpdateCommand.Execute()
at EntityProxy.Update(Boolean performDuplicateCheck)
at AppForm.HandleFormEventAssign(Boolean gridRefreshCallbackAdded)
at AppForm.RaiseDataEvent(FormEventId eventId)
at EndUserForm.Initialize(Entity entity)
at CustomizableForm.Execute(Entity entity, String formType)
at LeadDetailPage.ConfigureForm()
at AppUIPage.OnPreRender(EventArgs e)
at Control.PreRenderRecursiveInternal()
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Page.ProcessRequest()
at Page.ProcessRequest(HttpContext context)
at sfa_leads_edit_aspx.ProcessRequest(HttpContext context)
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at ApplicationStepManager.ResumeSteps(Exception error)
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
>Crm Exception: Message: The user for which we are checking a privilege should be in the same org as the context provided, ErrorCode: -2147220989, InnerException: System.ArgumentException: The user for which we are checking a privilege should be in the same
org as the context provided
I checked the user id and the organization id, and there are both correct (in the database). The user id "fb56b107-949f-df11-a1b0-00237df0351e " is actually the internal CRM System User.
What could the issue be?
Can anyone help, please. Thanks

Are you sure, the User which you are assigning is in the same organisaion. It seems that the Orgname which you are specifying is not correct. and the web service is pointing to other user which is not the current ms crm organisaion.
Could you please paste your code here for more details.?
Thanks, Ranjitsingh R | http://mscrm-developer.blogspot.com/ | MS CRM Consultant

Which release?? branded solaris 9 and solaris 8.

Hi people:
First question using solaris 10u10 and making branded zones;
which releases of solaris 9 and solaris8 are reported. I mean the printout of cat /etc/release of that branded zones will be...
Second one.. can I use P2V to put a solaris 10u6 box into a Solaris 10u10 or solaris 11 on a T3-1B box.. I ask because the lowest solaris 10 supported is u9 on the T3-1B.
Third one.. If question 2 isn't doable with Solaris10u10 could be done with Solaris11? Yes using P2V.
Thanks for any comment!

Yes, you'll need the x86 version, not the SPARC version.
I'd guess you probably need a fairly late version of Solaris 9 too in order to even boot the kernel on the AMD processors.

Im trying to upgrade my firefox and I get the incompatible browser message. Im runnning Mac OS 10.5.8 which according to your system requirements should be fine?

Im trying to upgrade my firefox and I get the incompatible browser message. Im runnning Mac OS 10.5.8 which according to your system requirements should be fine?

You can not update to 7.0.1 because you have PPC, read here the solution chosen for more information:
https://support.mozilla.com/en-US/questions/891475
thank you

Unable to release package administration lock for this system

Hi,
I created a Solaris package, but at the end of installation (on a Solaris 10 sparc) I get :
#pkgadd -d MyApp_version__SunOS_sparc.pkg
Installation of <MyAppName> was successful.
pkgadd: ERROR: ERROR: Unable to release package administration lock for
this system; try again later
pkgadd: ERROR: ERROR: Unable to release package administration lock for
this system; try again later
The solution is to delete:
#rm rf /tmp/.ai.pkg.zone.lock*
Then some lib issues occur .. fixed by:
#cd /usr/lib
#ln -sf ../../lib/libdlpi.so.1 libdlpi.so.1
Then I can install and uninstall without any problems as many time as I need.
Why does this issues occur when the package is first install on a system ?
Thanks,
Bianca

Hi Alan,
In the postinstall script I only handle the configuration files that my application has (all the files are in the /app/MyApp directory, no system files involved). I use the read user input and replace the values in the config file, and create another 2 files (also in /app/MyApp directory). This is all I do.
I use the packaging scripts: depend, copyright, pgkinfo, preinstall, request, postinstall, preremove, postremove
Thanks,
Bianca

I can't get in my iPod and it won't reset unless i put in my pass code which i don't know what should i do ?

I can't get in my iPod and it won't reset unless i put in my pass code which i don't know what should i do ?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Oracle Database 10g: Administration Workshop II , sponser required

I want to attend this course but dont have money to do so neither my employer is going to give me that , is there any sponser, if i do there work and they sponser this course to me,
Database 10g: Administration Workshop II
http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D17312&source_call=Oracle

Please, this forum is not meant for such self promotion ads.
Could be a violation of forum rule.

Which release of Administration Workshop I should I chose to pass 1z0-042?

Similar Messages

Maybe you are looking for